TY - GEN

T1 - SHAPING, DEBINDING AND SINTERING OF STEEL COMPONENTS VIA FUSED FILAMENT FABRICATION

AU - Gonzalez-Gutierrez, Joamin

AU - Godec, Damir

AU - Kukla, Christian

AU - Schlauf, Thomas

AU - Burkhardt, Carlo

AU - Holzer, Clemens

N1 - Conference code: 16

PY - 2017/6/8

Y1 - 2017/6/8

N2 - An economical alternative for the production of steel parts via additive manufacturing is to combine Fused Filament Fabrication (FFF) with debinding and sintering in a process referred as Shaping, Debinding and Sintering (SDS). In this paper, the SDS process for two types of feedstock materials containing two types steel alloys is described: From feedstock compounding to sintering. It was found that using the same binder system is possible to obtained sintered parts shaped by FFF with these two types of steel alloys.

AB - An economical alternative for the production of steel parts via additive manufacturing is to combine Fused Filament Fabrication (FFF) with debinding and sintering in a process referred as Shaping, Debinding and Sintering (SDS). In this paper, the SDS process for two types of feedstock materials containing two types steel alloys is described: From feedstock compounding to sintering. It was found that using the same binder system is possible to obtained sintered parts shaped by FFF with these two types of steel alloys.

KW - Additive manufacturing

KW - debinding

KW - Fused Filament Fabrication

KW - Sintering

KW - Steel

M3 - Conference contribution

SP - 99

BT - 16th International Scientific Conference on Production Engineering

A2 - Udiljak, Toma

CY - Zadar, Croatia

T2 - International Scientific Conference on Production Engineering

Y2 - 8 June 2017 through 10 June 2017

ER -