Selective laser melting of high-strength, low-modulus Ti–35Nb–7Zr–5Ta alloy

Research output: Contribution to journalArticleResearchpeer-review

Standard

Selective laser melting of high-strength, low-modulus Ti–35Nb–7Zr–5Ta alloy. / Ummethala, Raghunandan; Karamched, Phani S.; Rathinavelu, Sokkalingam et al.
In: Materialia, Vol. 14.2020, No. December, 100941, 12.2020.

Research output: Contribution to journalArticleResearchpeer-review

Harvard

Ummethala, R, Karamched, PS, Rathinavelu, S, Singh, N, Aggarwal, A, Sun, K, Ivanov, E, Kollo, L, Okulov, I, Eckert, J & Prashanth, KG 2020, 'Selective laser melting of high-strength, low-modulus Ti–35Nb–7Zr–5Ta alloy', Materialia, vol. 14.2020, no. December, 100941. https://doi.org/10.1016/j.mtla.2020.100941

APA

Ummethala, R., Karamched, P. S., Rathinavelu, S., Singh, N., Aggarwal, A., Sun, K., Ivanov, E., Kollo, L., Okulov, I., Eckert, J., & Prashanth, K. G. (2020). Selective laser melting of high-strength, low-modulus Ti–35Nb–7Zr–5Ta alloy. Materialia, 14.2020(December), Article 100941. https://doi.org/10.1016/j.mtla.2020.100941

Vancouver

Ummethala R, Karamched PS, Rathinavelu S, Singh N, Aggarwal A, Sun K et al. Selective laser melting of high-strength, low-modulus Ti–35Nb–7Zr–5Ta alloy. Materialia. 2020 Dec;14.2020(December):100941. Epub 2020 Oct 23. doi: 10.1016/j.mtla.2020.100941

Author

Ummethala, Raghunandan ; Karamched, Phani S. ; Rathinavelu, Sokkalingam et al. / Selective laser melting of high-strength, low-modulus Ti–35Nb–7Zr–5Ta alloy. In: Materialia. 2020 ; Vol. 14.2020, No. December.

Bibtex - Download

@article{a015439317d64da0827e56de487a6033,
title = "Selective laser melting of high-strength, low-modulus Ti–35Nb–7Zr–5Ta alloy",
abstract = "The state-of-the-art alloys for load-bearing implant applications lack the necessary functional attributes and are largely a compromise between biocompatibility and mechanical properties. While commercial alloys pose long-term toxicity and detrimental stress shielding effects, the newly developed alloys are closing in on the gaps, however, falling short of the desired elastic modulus necessary to rule out stress shielding. In this work, we report the fabrication of a low modulus β-Ti alloy, Ti–35Nb–7Zr–5Ta (TNZT), by selective laser melting (SLM) with optimized laser parameters. The as-prepared SLM TNZT shows a high ultimate tensile strength (~630 MPa), excellent ductility (~15%) and a lower elastic modulus (~81 GPa) when compared to the state-of-the-art cp-Ti and Ti-based alloys. The mechanical performance of the as-printed TNZT alloy has been examined and is correlated to the microstructure (grain structure, phase constitution and dislocation density). It is proposed that a high density of GND (geometrically necessary dislocations), resulting from rapid cooling, in the as-prepared condition strengthens the alloy, whereas the single phase β-bcc crystal structure results in lowering the elastic modulus. High grain boundary area and a preferred crystal orientation of {200} planes within the bcc crystal lattices contribute to an additional drop in the elastic modulus of the alloy. It is shown that the TNZT alloy, processed by SLM, demonstrates the best combination of strength and modulus, illustrating its potential as a promising biomaterial of the future.",
keywords = "Biomaterials, Elastic modulus, Microstructure evolution, Selective laser melting, Ti–35Nb–7Zr–5Ta",
author = "Raghunandan Ummethala and Karamched, {Phani S.} and Sokkalingam Rathinavelu and Neera Singh and Akash Aggarwal and Kang Sun and Eugene Ivanov and Lauri Kollo and Ilya Okulov and J{\"u}rgen Eckert and Prashanth, {K. G.}",
year = "2020",
month = dec,
doi = "10.1016/j.mtla.2020.100941",
language = "English",
volume = "14.2020",
journal = "Materialia",
issn = "2589-1529",
publisher = "Elsevier",
number = "December",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Selective laser melting of high-strength, low-modulus Ti–35Nb–7Zr–5Ta alloy

AU - Ummethala, Raghunandan

AU - Karamched, Phani S.

AU - Rathinavelu, Sokkalingam

AU - Singh, Neera

AU - Aggarwal, Akash

AU - Sun, Kang

AU - Ivanov, Eugene

AU - Kollo, Lauri

AU - Okulov, Ilya

AU - Eckert, Jürgen

AU - Prashanth, K. G.

PY - 2020/12

Y1 - 2020/12

N2 - The state-of-the-art alloys for load-bearing implant applications lack the necessary functional attributes and are largely a compromise between biocompatibility and mechanical properties. While commercial alloys pose long-term toxicity and detrimental stress shielding effects, the newly developed alloys are closing in on the gaps, however, falling short of the desired elastic modulus necessary to rule out stress shielding. In this work, we report the fabrication of a low modulus β-Ti alloy, Ti–35Nb–7Zr–5Ta (TNZT), by selective laser melting (SLM) with optimized laser parameters. The as-prepared SLM TNZT shows a high ultimate tensile strength (~630 MPa), excellent ductility (~15%) and a lower elastic modulus (~81 GPa) when compared to the state-of-the-art cp-Ti and Ti-based alloys. The mechanical performance of the as-printed TNZT alloy has been examined and is correlated to the microstructure (grain structure, phase constitution and dislocation density). It is proposed that a high density of GND (geometrically necessary dislocations), resulting from rapid cooling, in the as-prepared condition strengthens the alloy, whereas the single phase β-bcc crystal structure results in lowering the elastic modulus. High grain boundary area and a preferred crystal orientation of {200} planes within the bcc crystal lattices contribute to an additional drop in the elastic modulus of the alloy. It is shown that the TNZT alloy, processed by SLM, demonstrates the best combination of strength and modulus, illustrating its potential as a promising biomaterial of the future.

AB - The state-of-the-art alloys for load-bearing implant applications lack the necessary functional attributes and are largely a compromise between biocompatibility and mechanical properties. While commercial alloys pose long-term toxicity and detrimental stress shielding effects, the newly developed alloys are closing in on the gaps, however, falling short of the desired elastic modulus necessary to rule out stress shielding. In this work, we report the fabrication of a low modulus β-Ti alloy, Ti–35Nb–7Zr–5Ta (TNZT), by selective laser melting (SLM) with optimized laser parameters. The as-prepared SLM TNZT shows a high ultimate tensile strength (~630 MPa), excellent ductility (~15%) and a lower elastic modulus (~81 GPa) when compared to the state-of-the-art cp-Ti and Ti-based alloys. The mechanical performance of the as-printed TNZT alloy has been examined and is correlated to the microstructure (grain structure, phase constitution and dislocation density). It is proposed that a high density of GND (geometrically necessary dislocations), resulting from rapid cooling, in the as-prepared condition strengthens the alloy, whereas the single phase β-bcc crystal structure results in lowering the elastic modulus. High grain boundary area and a preferred crystal orientation of {200} planes within the bcc crystal lattices contribute to an additional drop in the elastic modulus of the alloy. It is shown that the TNZT alloy, processed by SLM, demonstrates the best combination of strength and modulus, illustrating its potential as a promising biomaterial of the future.

KW - Biomaterials

KW - Elastic modulus

KW - Microstructure evolution

KW - Selective laser melting

KW - Ti–35Nb–7Zr–5Ta

UR - http://www.scopus.com/inward/record.url?scp=85094315675&partnerID=8YFLogxK

U2 - 10.1016/j.mtla.2020.100941

DO - 10.1016/j.mtla.2020.100941

M3 - Article

AN - SCOPUS:85094315675

VL - 14.2020

JO - Materialia

JF - Materialia

SN - 2589-1529

IS - December

M1 - 100941

ER -