Research output

1 - 100 out of 388Page size: 100

10
20
50
100
All

Sort by: Publication date

2024
Published
Optimizing the tunnel ventilation design related to respirable dust in tunnelling by using CFD
Wei, R., Galler, R. & Weiß, C., 29 May 2024.
Research output: Contribution to conference › Paper › peer-review
Published
Determining the critical Reynolds number for suppressing Marangoni convection of alumina in silicate melt
Burhanuddin, B., Harmuth, H. & Vollmann, S., 29 Feb 2024, In: Ceramics International : CI. 50, 11, p. 18323-18328 6 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
A Modified Rotating-Finger Test Aiming to Quantify Refractory Wear Based on Fundamental Equations Governing Refractory Dissolution and Erosion
Burhanuddin, B. & Harmuth, H., 6 Feb 2024, Advances in Pyrometallurgy: Furnace Containment. Springer, p. 119-132
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2023
Published
Dissolution of Magnesia in Silicate Melts and Diffusivity Determination from CLSM Studies
Burhanuddin, B. & Harmuth, H., 21 Jul 2023, In: Applied Sciences : open access journal. 13.2023, 14, p. 8458 8 p., 8458.
Research output: Contribution to journal › Article › Research › peer-review
Published
Calculation of mass transfer for rotating finger test equipment
Burhanuddin, B., Harmuth, H. & Guarco, J., 4 Jul 2023.
Research output: Contribution to conference › Presentation › Research
Published
Influence of various sorts of coke breeze on the off-gas composition during iron ore sintering
Eisbacher-Lubensky, J., Weiß, C., Wegscheider, S. & Brus, C., 14 Jun 2023. 8 p.
Research output: Contribution to conference › Paper
E-pub ahead of print
Creep strain recovery of an in situ spinel-forming refractory castable under loading/unloading compressive creep conditions
Akbari, B., Gruber, D., Jin, S. & Harmuth, H., 17 May 2023, (E-pub ahead of print) In: Ceramics International. 49.2023, 15, p. 25225-25231 7 p.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Anisotropy of fracture mechanical properties of carbon-containing refractories and its impact on cracking in a steel ladle lining
Gruber, D., Schachner, S. & Harmuth, H., 2 May 2023, (E-pub ahead of print) In: Open ceramics. 14.2023, June, 5 p., 100363.
Research output: Contribution to journal › Article › Research › peer-review
Published
Critical comparison of experimental and computational fluid dynamic results for a sample introduction system in plasma spectrometry
Fasch, E., Maier, H., Landertshamer, F., Weiß, C., Prohaska, T. & Wegscheider, W., 1 Feb 2023.
Research output: Contribution to conference › Poster › Research › peer-review
2022
Published
Quantification of Magnesia Dissolution in Silicate Melts and Diffusivity Determination Using Rotating Finger Test
Burhanuddin, B., Harmuth, H. & Vollmann, S., 13 Dec 2022, In: Applied Sciences : open access journal. 12.2022, 24, 13 p., 12791.
Research output: Contribution to journal › Article › Research › peer-review
Published
Method for inverse calculation of erosion parameters in slag-refractory systems
Guarco, J., Vollmann, S., Harmuth, H. & Burhanuddin, B., Dec 2022, In: Materials Today Communications. 33.2022, December, 10 p., 104736.
Research output: Contribution to journal › Article › Research › peer-review
Published
A Comprehensive Review of Secondary Carbon Bio-Carriers for Application in Metallurgical Processes: Utilization of Torrefied Biomass in Steel Production
Kieush, L., Rieger, J., Schenk, J., Brondi, C., Rovelli, D., Echterhof, T., Cirilli, F., Thaler, C. M., Jaeger, N., Snaet, D., Peters, K. & Colla, V., 23 Nov 2022, In: Metals. 12.2022, 12, 38 p., 2005.
Research output: Contribution to journal › Review article › peer-review
Published
Influence of the Fine Fraction and Sintering on Selected Isotropic and Anisotropic Bulk Properties of Uniaxial Compacts
Fruhstorfer, J., Wagner, M., Gruber, D. & Harmuth, H., 14 Sept 2022, In: Interceram. 71.2022, September, p. 38-47 10 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
CHARACTERISATION OF A SAMPLE INTRODUCTION SYSTEM FOR PLASMA SPECTROMETRY BY COMPUTATIONAL FLUID DYNAMICS
Fasch, E., Maier, H., Landertshamer, F., Weiß, C., Prohaska, T. & Wegscheider, W., Sept 2022, ICP-MS AWT2022 LEOBEN-BOOK OF ABSTRACTS.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
E-pub ahead of print
Zirconium oxycarbides and oxycarbonitrides: A review
Kucheryavaya, A., Lenčéš, Z., Šajgalík, P. & Harmuth, H., 30 Aug 2022, (E-pub ahead of print) In: International journal of applied ceramic technology. 20.2023, 2, p. 541-562 22 p.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Sherwood correlation for finger-test experiments
Guarco, J., Burhanuddin, Vollmann, S. & Harmuth, H., 27 Aug 2022, (E-pub ahead of print) In: Results in Engineering. 15.2022, September, 5 p., 100610.
Research output: Contribution to journal › Article › Research › peer-review
Published
Creep characterization and modelling of ordinary refractory ceramics under combined compression and shear loading conditions
Schachner, S., Jin, S., Gruber, D. & Harmuth, H., 1 Aug 2022, In: Ceramics International. 48.2022, 15, p. 21101-21109 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Mixed-mode fracture behaviour of refractories with asymmetric wedge splitting test: Part II: Experimental case study
Dai, Y. J., Jin, S., Zhou, R., Li, Y. W., Harmuth, H. & Tschegg, E. K., 15 Jul 2022, In: Ceramics International. 48.2022, 14, p. 19757-19766 10 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Mixed-mode fracture behaviour of refractories with asymmetric wedge splitting test: Part I: Numerical implementation and validation
Dai, Y., Jin, S., Li, Y. W., Wang, Q., Zhou, W. & Harmuth, H., 15 Jul 2022, In: Ceramics International. 48.2022, 14, p. 19767-19775 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Corrigendum to “Asymmetric creep modeling of common refractory ceramics with high temperature wedge splitting test” [Eng. Fract. Mech. 25 (2021) 107819
Jin, S. & Harmuth, H., Jul 2022, 1 p.
Research output: Other contribution › Research
Published
Contributions to Crack Propagation in Coarse Grained Refractories
Gruber, D. & Harmuth, H., 22 Jun 2022.
Research output: Contribution to conference › Presentation › Research
Published
Discrete element modelling of ordinary refractory ceramics under cold crushing testing: Influence of minimum element size
Du, W., Jin, S., Emam, S., Gruber, D. & Harmuth, H., 15 Jun 2022, In: Ceramics International. 48.2022, 12, p. 17934-17941 8 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Evaluation of CLSM measurements for dissolution studies: A case study investigating alumina dissolution in a silicate slag
Harmuth, H. & Burhanuddin, B., 14 Jun 2022, In: Ceramics International. 48.2022, 19 Part A, p. 28174-28180 7 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Method for determination of mass transfer coefficients for dissolution of dense ceramics in liquid slags
Guarco, J., Harmuth, H. & Vollmann, S., 1 May 2022, In: International journal of heat and mass transfer. 186.2022, 1 May, 11 p., 122494.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Thermomechanical finite element modeling of steel ladle containing alumina spinel refractory lining
Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 1 Apr 2022, (E-pub ahead of print) In: Finite elements in analysis and design. 206.2022, 1 September, 10 p., 103762.
Research output: Contribution to journal › Article › Research › peer-review
Published
Method for determination of effective binary diffusivities in dissolution of dense ceramic materials
Guarco, J., Burhanuddin, B., Vollmann, S. & Harmuth, H., 15 Mar 2022, In: Ceramics International.
Research output: Contribution to journal › Article › Research › peer-review
Published
Application of an improved testing device for the study of alumina dissolution in silicate slag
Burhanuddin, B., Guarco, J., Harmuth, H. & Vollmann, S., 2 Mar 2022, In: Journal of the European Ceramic Society. 42.2022, 8, p. 3652-3659 8 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Investigation of three-stage compressive creep of a spinel forming refractory castable containing 8% MgO
Akbari, B., Gruber, D., Jin, S. & Harmuth, H., 1 Feb 2022, In: Ceramics International : CI. 48.2022, 3, p. 3287-3292 6 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Significance of an inclined plane test for mould slag assessment
Marschall, I., Harmuth, H. & Kircher, V., Jan 2022, In: Metallurgia Italiana. 2022, 1, p. 14-22 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Application of Artificial Neural Network to Predict the Thermal and Thermomechanical Behavior of Refractory Linings
Hou, A., Jin, S., Gruber, D. & Harmuth, H., 2022, 2022 International Joint Conference on Neural Networks, IJCNN 2022 - Proceedings. Institute of Electrical and Electronics Engineers, (Proceedings of the International Joint Conference on Neural Networks; vol. 2022-July).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
DETERMINATION OF SECONDARY CREEP STAGE PARAMETERS OF SHAPED ALUMINA SPINEL REFRACTORY WITH AID OF GENETIC ALGORITHM
Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 2022.
Research output: Contribution to conference › Paper › peer-review
2021
Published
Significance of an inclined plane test for mould slag assessment
Marschall, I., Harmuth, H. & Kircher, V., 20 Oct 2021, Proceedings of the 10th European Conference on Continuous Casting. Mailand: Associazione Italiana di Metallurgia, 9 p. CC_017
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Significance of an inclined plane test for mould slag assessment
Marschall, I. & Harmuth, H., 20 Oct 2021.
Research output: Contribution to conference › Presentation › Research
Published
Application of liquid-liquid mass transfer for a steel ladle
Doletschek, M., Vollmann, S. & Harmuth, H., 6 Oct 2021, STEELSIM 2021, 9th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking-STEELSIM2021. p. 8 8 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Combined damaged elasticity and creep modeling of ceramics with wedge splitting tests
Samadi, S., Jin, S. & Harmuth, H., 15 Sept 2021, In: Ceramics International. 47.2021, 18, p. 25846-25853 8 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Phase formation in MgO-C refractories with different antioxidants
Atzenhofer, C. & Harmuth, H., 27 Aug 2021, In: Journal of the European Ceramic Society. 41.2021, 14, p. 7330-7338 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Asymmetric creep modeling of common refractory ceramics with high temperature wedge splitting test
Jin, S. & Harmuth, H., Jul 2021, In: Engineering Fracture Mechanics. 252.2021, July, 12 p., 107819.
Research output: Contribution to journal › Article › Research › peer-review
Published
Investigation of calcium-aluminate-based mold flux of different compositions
Marschall, I. & Harmuth, H., 10 Jun 2021, In: Steel research international. 93.2022, 3, 8 p., 2100187.
Research output: Contribution to journal › Article › Research › peer-review
Published
A comparison of two damage models for inverse identification of mode I fracture parameters: Case study of a refractory ceramic
Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 1 May 2021, In: International Journal of Mechanical Sciences. 197, 1 May, 9 p., 106345.
Research output: Contribution to journal › Article › Research › peer-review
Published
Design, operation and evaluation of an improved refractory wear testing technique
Kircher, V., Burhanuddin & Harmuth, H., 17 Apr 2021, In: Measurement. 178.2021, June, 9 p., 109429.
Research output: Contribution to journal › Article › Research › peer-review
Published
Investigation of Calcium Aluminate based Mold Slag Compositions
Harmuth, H. & Marschall, I., 21 Feb 2021.
Research output: Contribution to conference › Presentation › Research
Published
Energy Consumption in Metal Powder Production
Dopler, M. & Weiß, C., 14 Jan 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 1, p. 2-8 7 p.
Research output: Contribution to journal › Article › Research
2020
Published
METHOD AND DEVICE FOR PRODUCING MATERIAL POWDER
Dopler, M. & Weiß, C., 10 Dec 2020, IPC No. B22F9/08, Patent No. WO2020244948 (A1), Priority date 5 Jun 2019
Research output: Patent
Published
METHOD AND DEVICE FOR PRODUCING MATERIAL POWDER
Dopler, M. & Weiß, C., 9 Dec 2020, IPC No. B22F9/08, Patent No. EP3747574 (A1), Priority date 5 Jun 2019
Research output: Patent
Published
Creep Parameter Determination of a Shaped Alumina Spinel Refractory Using Statistical Analysis
Samadi, S., Teixeira, L., Jin, S., Gruber, D. & Harmuth, H., Sept 2020.
Research output: Contribution to conference › Paper
E-pub ahead of print
R-curves determination of ordinary refractory ceramics assisted by digital image correlation method
Dai, Y., Harmuth, H., Jin, S., Gruber, D. & Yawei, L., 20 May 2020, (E-pub ahead of print) In: Journal of the European Ceramic Society. 40.2020, 13, p. 4655-4663 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Solid state recycling of aluminum alloy chips via pulsed electric current sintering
Cislo, C. N., Kronthaler, B., Buchmayr, B. & Weiß, C., 10 Mar 2020, In: Journal of Manufacturing and Materials Processing. 4.2020, 1, 19 p., 4010023.
Research output: Contribution to journal › Article › Research › peer-review
Published
Statistical study of compressive creep parameters of an alumina spinel refractory
Samadi, S., Jin, S., Gruber, D., Harmuth, H. & Schachner, S., 1 Mar 2020, In: Ceramics International : CI. 46.2020, 10A, p. 14662-14668 7 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Mechanical and fracture investigation of magnesia refractories with acoustic emission-based method
Dai, Y., Yawei, L., Jin, S., Harmuth, H., Yan, W. & Xu, X., Jan 2020, In: Journal of the European Ceramic Society. 40.2020, 1, p. 181-191 11 p.
Research output: Contribution to journal › Article › Research › peer-review
2019
Published
Fracture behaviour of magnesia refractory materials in tension with the Brazilian test
Dai, Y., Li, Y., Xu, X., zhu, Q., Yan, W., Jin, S. & Harmuth, H., Dec 2019, In: Journal of the European Ceramic Society. 39.2019, 16, p. 5433-5441 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Thermomechanical Analysis of Purging Plugs by Applying Fluid–Solid Conjugate Heat Transfer Modeling
Tan, F., He, Z., Jin, S., Cai, H., Li, B., Li, Y. & Harmuth, H., 1 Nov 2019, In: Steel research international. 90.2019, 11, 9 p., 1900213.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Flame front progress in gas assisted iron ore sintering
Tsioutsios, N., Weiß, C., Rieger, J. & Geier, B., 21 Oct 2019, (E-pub ahead of print) In: Applied thermal engineering. 165.2020, 25 January, 11 p., 114554.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Fracture behavior of magnesia refractory materials under combined cyclic thermal shock and mechanical loading conditions
Dai, Y., Li, Y., Jin, S., Harmuth, H. & Xu, X., 17 Oct 2019, (E-pub ahead of print) In: Journal of the American Ceramic Society. 103.2020, 3, p. 1956-1969 14 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
A method for steel ladle lining optimization applying thermomechanical modelling and Taguchi approaches
Jin, S., Hou, A., Harmuth, H. & Gruber, D., 16 Oct 2019, Proceedings of UNITECR 2019: 16th Biennial Worldwide Congress. Yokohama, p. 1-4 4 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Contributions to refractories creep characterisation
Gruber, D., Jin, S., Schachner, S., Stückelschweiger, M. & Harmuth, H., 16 Oct 2019, Proceedings of UNITECR'19. Yokohama, p. 1-4 4 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Contributions to refractories creep characterisation
Gruber, D., Jin, S., Schachner, S., Stückelschweiger, M. & Harmuth, H., 16 Oct 2019.
Research output: Contribution to conference › Presentation › Research
Published
TOWARDS THE PREDICTION OF REFRACTORY EROSION BY LIQUID SLAGS AND METAL
Leitold, C., Harmuth, H. & Vollmann, S., 26 Sept 2019, Supplier Industries enabling REFRACTORIES. p. 163-166 194 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Wedge-Splitting Test on Carbon-Containing Refractories at High Temperatures
Stückelschweiger, M., Gruber, D., Jin, S. & Harmuth, H., 8 Aug 2019, In: Applied Sciences : open access journal. 9.2019, 16, 10 p., 3249.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Automated break temperature determination of mould slags for the continuous casting of steel based on temperature-dependent viscosity data
Kölbl, N. & Harmuth, H., 25 Jul 2019, (E-pub ahead of print) In: Ironmaking and steelmaking. 47.2019, 8, p. 899-902 4 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Influence of Variation/Response Space Complexity and Variable Completeness on BP-ANN Model Establishment: Case Study of Steel Ladle Lining
Hou, A., Jin, S., Gruber, D. & Harmuth, H., 16 Jul 2019, In: Applied Sciences : open access journal. 9.2019, 14, 12 p., 2835.
Research output: Contribution to journal › Article › Research › peer-review
Published
Modelling of a steel ladle and prediction of its thermomechanical behavior by finite element simulation together with artificial neural network approaches
Hou, A., Jin, S., Gruber, D. & Harmuth, H., 4 Jul 2019, p. 1109 - 1116. 7 p.
Research output: Contribution to conference › Paper
Published
A method to characterize asymmetrical three-stage creep of ordinary refractory ceramics and its application for numerical modelling
Schachner, S., Jin, S., Gruber, D. & Harmuth, H., 6 Jun 2019, In: Journal of the European Ceramic Society. 39.2019, 14, p. 4384-4393 10 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Investigation of water droplet impingement under conditions of the secondary cooling zone of a continuous caster
Preuler, L., Peyha, M., Weiß, C., Bernhard, C. & Ilie, S., 6 May 2019, Proceedings of the AISTech 2019, Pittsburgh. 10 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
The advanced flamelet equilibrium hybrid model for the RecoDust process using OpenFOAM
Edler, F., Spijker, C., Reiter, W., Rieger, J., Raonic, Z. & Raupenstrauch, H., 29 Apr 2019, 15th Minisymposium Verfahrenstechnik and 6th Partikelforum.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Thermal and Thermomechanical Responses Prediction of a Steel Ladle Using a Back-Propagation Artificial Neural Network Combining Multiple Orthogonal Arrays
Hou, A., Jin, S., Harmuth, H. & Gruber, D., 29 Apr 2019, In: Steel research international. 2019, 8 p., 1900116.
Research output: Contribution to journal › Article › Research › peer-review
Published
Quality of the coke sinter substitute
Tsioutsios, N. & Weiß, C., 27 Apr 2019.
Research output: Contribution to conference › Poster › Research
Published
Analytical and numerical determination of the heat transfer coefficient between scrap and hot metal based on small-scale experiments
Penz, F. M., Tavares, R. P., Weiss, C., Schenk, J., Ammer, R., Pastucha, K. & Klösch, G., 24 Apr 2019, In: International journal of heat and mass transfer. 138.2019, August, p. 640-646 7 p.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Residual Processing in the European Steel Industry: A Technological Overview
Rieger, J. & Schenk, J., 3 Apr 2019, (E-pub ahead of print) In: Journal of Sustainable Metallurgy. 5.2019, 3, p. 295-309 15 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Creep testing of carbon containing refractories under reducing conditions
Stückelschweiger, M., Gruber, D., Jin, S. & Harmuth, H., 4 Feb 2019, In: Ceramics International : CI. 45.2019, 8, p. 9776-9781 6 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
High-temperature investigation of mould slag crystallization by single and double hot thermocouple techniques
Kölbl, N., Marschall, I. & Harmuth, H., 2019, In: Journal of iron and steel research international. 26.2019, 4, p. 345-354 9 p.
Research output: Contribution to journal › Review article › peer-review
Published
Identification of secondary raw materials in mold powders and their melting behavior
Marschall, I., Kölbl, N., Harmuth, H. & Atzenhofer, C., 2019, In: Journal of iron and steel research international. 26.2019, 4, p. 403-411 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Investigation of water droplet impingement under conditions of the secondary cooling zone of a continuous slab caster
Preuler, L., Peyha, M., Weiß, C., Bernhard, C. & Ilie, S., 2019, AISTech - Iron and Steel Technology Conference Proceedings. Vol. 2019-May. p. 1441-1449 9 p. (AISTech - Iron and Steel Technology Conference Proceedings).
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Keramikfunde: Belege für den Beginn und die Entwicklung der Besiedelung im Bezirk Liezen
Presslinger, H., Eibner, C., Harmuth, H. & Atzenhofer, C., 2019, In: Da schau her. 2019, 1, p. 16-20 5 p.
Research output: Contribution to journal › Article › Research
Published
Naturwissenschaftliche Untersuchungsergebnisse der Klaubproben vom mittelbronzezeitlichen Kupfererzverhüttungsplatz Greithbauer/KG Trieben/OG Trieben
Presslinger, H., Eibner, C., Harmuth, H. & Atzenhofer, C., 2019, In: Da schau her. 40.2019, 3, p. 18-21 4 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Recovery of Critical Metals from Industrial Waste Waters
Vollprecht, D., Sedlazeck, K. P., Plessl, K., Öfner, W., Weiß, C., Müller, P., Mischitz, R., Olbrich, T., Schlömann, M., Schopf, S., Frisch, G. & Pomberger, R., 2019, ISWA World Congress 2019. Bilbao, p. 94 - 95
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2018
Published
Effect of the phase transformation on fracture behaviour of fused silica refractories
Dai, Y., Yin, Y., Xu, X., Jin, S., Li, Y. & Harmuth, H., 1 Dec 2018, In: Journal of the European Ceramic Society. 38, 16, p. 5601-5609 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Three stage creep behavior of MgO containing ordinary refractories in tension and compression
Schachner, S., Jin, S., Gruber, D. & Harmuth, H., 13 Sept 2018, In: Ceramics International : CI.
Research output: Contribution to journal › Article › Research › peer-review
Published
A Method for Steel Ladle Lining Optimization Applying Thermomechanical Modeling and Taguchi Approaches
Hou, A., Jin, S., Harmuth, H. & Gruber, D., 9 Aug 2018, In: JOM. 70, 11, p. 2449 2456 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Fluid Force-Induced Detachment Criteria for Nonmetallic Inclusions Adhered to a Refractory/Molten Steel Interface
Dieguez Salgado, U., Weiß, C., Michelic, S. K. & Bernhard, C., 1 Aug 2018, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 49, 4, p. 1632-1643 12 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Thermomechanical modelling of a torpedo car by considering working lining spalling
Jin, S., Harmuth, H., Gruber, D., Buhr, A., Sinnema, S. & Rebouillat, L., 17 Jul 2018, In: Ironmaking and steelmaking. 0301-9233, 5 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Filming blast fragmentation of rock and mortar cylinders
Kukolj, I., Iravani, A., Ouchterlony, F., Weiß, C. & Lubensky, J., Jun 2018, Fragblast 12: 12th International Symposium on Rock Fragmentation by Blasting. Schunnesson, H. & Johansson, D. (eds.). Luleå: Luleå Univ. of Technology, p. 483-494 12 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Modelling the dependence of sinter bed permeability on sinter porosity and structure
Höftberger, A., Bhattacharyya, A., Schenk, J., Weiß, C., Schaffer, C. & Schuster, E., Jun 2018, Proceedings of ADMET 2018.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Modified DHTT Equipment for Crystallization Studies of Mold Slags
Kölbl, N., Harmuth, H. & Marschall, I., 9 Apr 2018, In: Metallurgical and Materials Transactions B, Process metallurgy and materials processing science. 2018, 49/4, p. 1898-1909 12 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
De-agglomeration rate of silicate bonded sand cores during core removal
Stauder, B., Harmuth, H. & Schumacher, P., Feb 2018, In: Journal of materials processing technology. 252 (2018), 252, p. 652-658 7 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
APPLICATION OF A MODIFIED DOUBLE HOT THERMOCOUPLE TECHNIQUE FOR MOLD SLAGS
Kölbl, N., Marschall, I., Kircher, V. & Harmuth, H., 2018, Proceedings of the 7th international congress on science and technology of steelmaking. Associazione Italiana di Metallurgia
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Advanced creep testing of refractories providing new insight into material behaviour
Jin, S., Harmuth, H., Gruber, D., Schachner, S., Meunier, P. & Techer, R., 2018, In: Refractories worldforum. 10, 2, p. 63-67
Research output: Contribution to journal › Article › Research › peer-review
Published
Advanced measures to characterize mechanical properties of refractories
Jin, S., Harmuth, H., Gruber, D. & Sidi Mammar, A., 2018, In: China's refractories. 27, 1, p. 8-13
Research output: Contribution to journal › Article › Research
Published
An improved Double Hot Thermocouple Technique for Mold Slag Investigation
Kölbl, N., Marschall, I. & Harmuth, H., 2018, AISTech 2018: Proceedings of the Iron & Steel Technology Conference : 7-10 May 2018, Philadelphia, Pa., U.S.A..
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Investigation of Compressive Refractory Creep
Jin, S. & Harmuth, H., 2018, In: China's refractories. 27, 3, p. 21-27 7 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Keramik aus der Franz-Josephs-Grotte in Unterzeiring: die naturwissenschaftliche Bewertung eines bronzezeitlichen Keramikwerkstoffes
Preßlinger, H., Eibner, C., Harmuth, H. & Atzenhofer, C., 2018, In: Da schau her. 2018, 3, p. 16-18 3 p.
Research output: Contribution to journal › Article › Research
Published
Prozessanalyse zum ressourcenschonenden Recycling von Spanschrotten aus der Aluminiumverarbeitung
Cislo, C., Fazokas, T., Buchmayr, B. & Weiß, C., 2018.
Research output: Contribution to conference › Paper
Published
Thermal and thermomechanical evaluations of channel induction furnace applying strong insulation containing lightweight aggregate
Jin, S., Harmuth, H. & Gruber, D., 2018, In: Ironmaking and steelmaking. 2018, 45, p. 514-518 5 p.
Research output: Contribution to journal › Article › Research › peer-review
2017
Published
Determination of the fracture behaviour of MgO-refractories using multi-cycle wedge splitting test and digital image correlation
Dai, Y., Gruber, D. & Harmuth, H., Dec 2017, In: Journal of the European Ceramic Society. 37.2017, 15, p. 5035-5043 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Fracture process zone development in a magnesia and a magnesia spinel refractory as observed by digital image correlation
Gruber, D., Dai, Y. & Harmuth, H., 26 Sept 2017, Proceedings of UNITECR 2017: 26.9.2017-29.9.2017, Santiago de Chile, Chile. Santiago de Chile
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Modelling and inverse investigation of the fracture process for a magnesia spinel refractory using a heterogeneous continuum model
Dai, Y., Gruber, D., Harmuth, H. & Jin, S., Sept 2017, In: Engineering Fracture Mechanics. 182.2017, September, p. 438-448 11 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Observation and quantification of the fracture process zone for two magnesia refractories with different brittleness
Dai, Y., Gruber, D. & Harmuth, H., 1 Jun 2017, In: Journal of the European Ceramic Society. 37.2017, 6, p. 2521-2529 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Fracture behaviour and microstructure of refractory materials for steel ladle purging plugs in the system Al2O3-MgO-CaO
Long, B., Xu, G., Buhr, A., Jin, S. & Harmuth, H., 26 Apr 2017, In: Ceramics International : CI. 43.2017, 13, p. 9679-9685 7 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Comparison of Cement- and Hydratable Alumina-Bonded Alumina-Spinel Materials for Steel Ladle Purging Plugs
Long, B., Buhr, A., Jung, I-H., Jin, S., Harmuth, H. & Dutton, J., 2017, In: Refractories worldforum. 9, 3, p. 93-106 14 p.
Research output: Contribution to journal › Article › Research
Published
Composition and properties of a metakaolin-based geopolymer binder suitable for shaping using a slinger
Harmuth, H. & Mairitsch, E., 2017, Construction and Building Materials. p. 277-283
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Einbindung der simulation in die entwicklung eines staubbeladenen verbrennungsreaktors hinsichtlich brenner und reaktordesign
Edler, F., Geier, B., Reiter, W., Rieger, J., Spijker, C. & Raupenstrauch, H., 2017, In: VDI-Berichte. 2017, 2302, p. 729-734 6 p.
Research output: Contribution to journal › Conference article › peer-review

Previous 1 2 3 4 Next

Research Portal

Research output

Advanced filters