Oxidation behavior of arc evaporated TiSiN coatings investigated by in-situ synchrotron X-ray diffraction and HR-STEM

Research output: Contribution to journalArticleResearchpeer-review

Standard

Oxidation behavior of arc evaporated TiSiN coatings investigated by in-situ synchrotron X-ray diffraction and HR-STEM. / Moritz, Yvonne; Saringer, Christian; Tkadletz, Michael et al.
In: Surface & coatings technology, Vol. 404.2020, No. 25 December, 126632, 25.12.2020.

Research output: Contribution to journalArticleResearchpeer-review

Vancouver

Moritz Y, Saringer C, Tkadletz M, Stark A, Schell N, Letofsky-Papst I et al. Oxidation behavior of arc evaporated TiSiN coatings investigated by in-situ synchrotron X-ray diffraction and HR-STEM. Surface & coatings technology. 2020 Dec 25;404.2020(25 December):126632. Epub 2020 Nov 7. doi: 10.1016/j.surfcoat.2020.126632

Bibtex - Download

@article{926ec3b058a847b2815f5835b9e1eb37,
title = "Oxidation behavior of arc evaporated TiSiN coatings investigated by in-situ synchrotron X-ray diffraction and HR-STEM",
abstract = "Owing to its excellent mechanical and thermal properties and outstanding oxidation resistance, TiSiN is used for protective hard coatings for cutting applications. While several reports confirm the oxidation stability of TiSiN up to temperatures above 800 °C, literature is currently lacking a thorough investigation of the oxidation sequence of this coating system. Thus, in this study the oxidation mechanism of TiSiN was monitored via in-situ synchrotron X-ray diffraction (XRD) and complemented by a detailed analysis of the microstructure and elemental composition of oxidized coatings. A TiSiN coating was deposited by cathodic-arc evaporation in an industrial scale deposition plant. In-situ synchrotron XRD experiments of the powdered coating showed an oxidation stability up to ~830 °C, followed by the formation of both, rutile and anatase TiO 2 with increasing temperature. The formation of anatase during oxidation was confirmed by Raman and XRD investigations on a solid coating. High-resolution scanning transmission electron microscopy investigations revealed the oxidation of only several hundred nm of the coating surface after oxidation at 930 °C for 5 min, while increasing the temperature to 1130 °C resulted in full oxidation of the Ti(Si)N nanocrystals, accompanied by high porosity and significant grain coarsening. Furthermore, elemental analysis showed the presence of TiO 2 grains surrounded by an amorphous Si-O-N phase as well as the formation of a TiO 2 top layer due to diffusion of Ti to the surface. The obtained results provide detailed and novel insight into the oxidation mechanism of TiSiN as well as on the microstructure of oxidized TiSiN coatings. ",
author = "Yvonne Moritz and Christian Saringer and Michael Tkadletz and Andreas Stark and Norbert Schell and Ilse Letofsky-Papst and Christoph Czettl and Markus Pohler and Nina Schalk",
note = "Publisher Copyright: {\textcopyright} 2020 The Authors",
year = "2020",
month = dec,
day = "25",
doi = "10.1016/j.surfcoat.2020.126632",
language = "English",
volume = "404.2020",
journal = "Surface & coatings technology",
issn = "0257-8972",
publisher = "Elsevier",
number = "25 December",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Oxidation behavior of arc evaporated TiSiN coatings investigated by in-situ synchrotron X-ray diffraction and HR-STEM

AU - Moritz, Yvonne

AU - Saringer, Christian

AU - Tkadletz, Michael

AU - Stark, Andreas

AU - Schell, Norbert

AU - Letofsky-Papst, Ilse

AU - Czettl, Christoph

AU - Pohler, Markus

AU - Schalk, Nina

N1 - Publisher Copyright: © 2020 The Authors

PY - 2020/12/25

Y1 - 2020/12/25

N2 - Owing to its excellent mechanical and thermal properties and outstanding oxidation resistance, TiSiN is used for protective hard coatings for cutting applications. While several reports confirm the oxidation stability of TiSiN up to temperatures above 800 °C, literature is currently lacking a thorough investigation of the oxidation sequence of this coating system. Thus, in this study the oxidation mechanism of TiSiN was monitored via in-situ synchrotron X-ray diffraction (XRD) and complemented by a detailed analysis of the microstructure and elemental composition of oxidized coatings. A TiSiN coating was deposited by cathodic-arc evaporation in an industrial scale deposition plant. In-situ synchrotron XRD experiments of the powdered coating showed an oxidation stability up to ~830 °C, followed by the formation of both, rutile and anatase TiO 2 with increasing temperature. The formation of anatase during oxidation was confirmed by Raman and XRD investigations on a solid coating. High-resolution scanning transmission electron microscopy investigations revealed the oxidation of only several hundred nm of the coating surface after oxidation at 930 °C for 5 min, while increasing the temperature to 1130 °C resulted in full oxidation of the Ti(Si)N nanocrystals, accompanied by high porosity and significant grain coarsening. Furthermore, elemental analysis showed the presence of TiO 2 grains surrounded by an amorphous Si-O-N phase as well as the formation of a TiO 2 top layer due to diffusion of Ti to the surface. The obtained results provide detailed and novel insight into the oxidation mechanism of TiSiN as well as on the microstructure of oxidized TiSiN coatings.

AB - Owing to its excellent mechanical and thermal properties and outstanding oxidation resistance, TiSiN is used for protective hard coatings for cutting applications. While several reports confirm the oxidation stability of TiSiN up to temperatures above 800 °C, literature is currently lacking a thorough investigation of the oxidation sequence of this coating system. Thus, in this study the oxidation mechanism of TiSiN was monitored via in-situ synchrotron X-ray diffraction (XRD) and complemented by a detailed analysis of the microstructure and elemental composition of oxidized coatings. A TiSiN coating was deposited by cathodic-arc evaporation in an industrial scale deposition plant. In-situ synchrotron XRD experiments of the powdered coating showed an oxidation stability up to ~830 °C, followed by the formation of both, rutile and anatase TiO 2 with increasing temperature. The formation of anatase during oxidation was confirmed by Raman and XRD investigations on a solid coating. High-resolution scanning transmission electron microscopy investigations revealed the oxidation of only several hundred nm of the coating surface after oxidation at 930 °C for 5 min, while increasing the temperature to 1130 °C resulted in full oxidation of the Ti(Si)N nanocrystals, accompanied by high porosity and significant grain coarsening. Furthermore, elemental analysis showed the presence of TiO 2 grains surrounded by an amorphous Si-O-N phase as well as the formation of a TiO 2 top layer due to diffusion of Ti to the surface. The obtained results provide detailed and novel insight into the oxidation mechanism of TiSiN as well as on the microstructure of oxidized TiSiN coatings.

UR - http://www.scopus.com/inward/record.url?scp=85096157234&partnerID=8YFLogxK

U2 - 10.1016/j.surfcoat.2020.126632

DO - 10.1016/j.surfcoat.2020.126632

M3 - Article

VL - 404.2020

JO - Surface & coatings technology

JF - Surface & coatings technology

SN - 0257-8972

IS - 25 December

M1 - 126632

ER -