Optimizing the magnetic properties of Fe-based amorphous powder by adjusting atomic structures from vitrification at different temperatures
Research output: Contribution to journal › Article › Research › peer-review
Standard
In: Journal of applied physics, Vol. 126.2019, No. 16, 165109, 25.10.2019.
Research output: Contribution to journal › Article › Research › peer-review
Harvard
APA
Vancouver
Author
Bibtex - Download
}
RIS (suitable for import to EndNote) - Download
TY - JOUR
T1 - Optimizing the magnetic properties of Fe-based amorphous powder by adjusting atomic structures from vitrification at different temperatures
AU - Kim, Song Yi
AU - Oh, Hye Ryeong
AU - Kim, Hyeon Ah
AU - Lee, A. Young
AU - Kim, Hwi Jun
AU - Yang, Sang Sun
AU - Kim, Yong Jin
AU - Choi, Hyun Joo
AU - Kim, Il Hyun
AU - Kim, Hyun Gil
AU - Eckert, Jürgen
AU - Kim, Jong Ryoul
AU - Lee, Min Ha
PY - 2019/10/25
Y1 - 2019/10/25
N2 - We present variation of the magnetic properties of Fe77.8Nb0.2B14P6C2 amorphous alloys vitrified at different temperatures by changing the atomic structures dependent on the critical cooling rate. The thermophysical properties of the amorphous state achieved after quenching the melt with cold nitrogen atomization gas are compared with those obtained using hot nitrogen gas with a temperature corresponding to the supercooled liquid of the alloy above the glass transition (Tg) but below crystallization temperature (Tx). The differently vitrified Fe77.8Nb0.2B14P6C2 glasses represent different states of high pressure gas atomized amorphous powder at different temperatures obtained by adjusting the gas temperature during the atomization process. The magnetic properties of these different amorphous powders are also investigated. The saturation magnetic flux density of slowly cooled Glass2 is 1.38 T with 450 A/m coercivity corresponding to "semi-soft" magnetic materials. The fast cooled Glass1 powder shows typical soft magnetic properties with lower coercivity (174 A/m), even though the saturation magnetization flux densities are similar in both identical compositions of amorphous powder due to its entropy difference related to the formation of clusters. We can control the magnetic property of amorphous materials from soft to half-soft by adjusting freezing temperature and ordering of atoms.
AB - We present variation of the magnetic properties of Fe77.8Nb0.2B14P6C2 amorphous alloys vitrified at different temperatures by changing the atomic structures dependent on the critical cooling rate. The thermophysical properties of the amorphous state achieved after quenching the melt with cold nitrogen atomization gas are compared with those obtained using hot nitrogen gas with a temperature corresponding to the supercooled liquid of the alloy above the glass transition (Tg) but below crystallization temperature (Tx). The differently vitrified Fe77.8Nb0.2B14P6C2 glasses represent different states of high pressure gas atomized amorphous powder at different temperatures obtained by adjusting the gas temperature during the atomization process. The magnetic properties of these different amorphous powders are also investigated. The saturation magnetic flux density of slowly cooled Glass2 is 1.38 T with 450 A/m coercivity corresponding to "semi-soft" magnetic materials. The fast cooled Glass1 powder shows typical soft magnetic properties with lower coercivity (174 A/m), even though the saturation magnetization flux densities are similar in both identical compositions of amorphous powder due to its entropy difference related to the formation of clusters. We can control the magnetic property of amorphous materials from soft to half-soft by adjusting freezing temperature and ordering of atoms.
UR - http://www.scopus.com/inward/record.url?scp=85074194776&partnerID=8YFLogxK
U2 - 10.1063/1.5116843
DO - 10.1063/1.5116843
M3 - Article
AN - SCOPUS:85074194776
VL - 126.2019
JO - Journal of applied physics
JF - Journal of applied physics
SN - 0021-8979
IS - 16
M1 - 165109
ER -
