TY - JOUR

T1 - Oligoether Ester-Functionalized ProDOT Copolymers on Si/Monolayer Graphene as Capacitive Thin Film Electrodes

AU - Karazehir, Tolga

AU - Sarac, Baran

AU - Gilsing, Hans Detlev

AU - Eckert, Jürgen

AU - Sarac, A. Sezai

N1 - Publisher Copyright: © 2020 The Author(s). Published on behalf of The Electrochemical Society by IOP Publishing Limited.

PY - 2020/3/23

Y1 - 2020/3/23

N2 - In this study, electrochemical polymerization of 3,4-propylenedioxythiophene (ProDOT 1), ProDOT bearing oligoether ester (ProDOT-EO-ester 2) and their copolymerization onto homogeneously CVD coated nano-graphene/Si support is realized to attain graphene/ProDOT based copolymer hybrid nanostructures. By introducing oligoether side chain to ProDOT backbone and using different [ProDOT]/[ProDOT-EO-ester] molar ratios ensures a considerable decrease in oxidation potential of polymer allowing tunable properties to copolymers revealing improvement electrochemical capacitance and electrochemical activity which are clearly reflected by the experimental results. Capacitive behavior of copolymers is determined by electrochemical impedance spectroscopy, cyclic voltammetry. Moreover, The structural, morphological and spectroscopic characterization of the copolymers is investigated by XRD, AFM, SEM, EDX, FTIR, and Raman, respectively. By the increase of ProDOT in the copolymer composition, the higher dopant concentration is attained suggesting an enhanced conductivity agree well with the impedance and CV results, where the copolymerization of ProDOT 1 and ProDOT-EO-ester 2 in equal molarity results in the highest specific capacitance and redox activity. The adopted equivalent circuit model for polymers is in good agreement with the experimental data of impedance. Due to the difference in conjugated structure between ProDOT and ProDOT-EO-ester by the presence of the EO-ester group leads to a decrease in charge transfer resistance with increasing mole fraction of ProDOT-EO-ester. The charge transfer resistance of [ProDOT] 0/[ProDOT-EO-ester] 0 = 1:1 coated Si/graphene is nearly 51 and 24 times lower value compared to those of PProDOT and P(ProDOT-EO-ester) homopolymers coated Si/graphene, respectively, confirming that the copolymerization improves the electron conduction. By Mott-Schottky measurements, increasing mole fraction of ProDOT-EO-ester 2 in copolymer composition results in the alteration of semiconducting behavior. The developed graphene-polymer hybrid electrodes can be a potential candidate for energy storage devices.

AB - In this study, electrochemical polymerization of 3,4-propylenedioxythiophene (ProDOT 1), ProDOT bearing oligoether ester (ProDOT-EO-ester 2) and their copolymerization onto homogeneously CVD coated nano-graphene/Si support is realized to attain graphene/ProDOT based copolymer hybrid nanostructures. By introducing oligoether side chain to ProDOT backbone and using different [ProDOT]/[ProDOT-EO-ester] molar ratios ensures a considerable decrease in oxidation potential of polymer allowing tunable properties to copolymers revealing improvement electrochemical capacitance and electrochemical activity which are clearly reflected by the experimental results. Capacitive behavior of copolymers is determined by electrochemical impedance spectroscopy, cyclic voltammetry. Moreover, The structural, morphological and spectroscopic characterization of the copolymers is investigated by XRD, AFM, SEM, EDX, FTIR, and Raman, respectively. By the increase of ProDOT in the copolymer composition, the higher dopant concentration is attained suggesting an enhanced conductivity agree well with the impedance and CV results, where the copolymerization of ProDOT 1 and ProDOT-EO-ester 2 in equal molarity results in the highest specific capacitance and redox activity. The adopted equivalent circuit model for polymers is in good agreement with the experimental data of impedance. Due to the difference in conjugated structure between ProDOT and ProDOT-EO-ester by the presence of the EO-ester group leads to a decrease in charge transfer resistance with increasing mole fraction of ProDOT-EO-ester. The charge transfer resistance of [ProDOT] 0/[ProDOT-EO-ester] 0 = 1:1 coated Si/graphene is nearly 51 and 24 times lower value compared to those of PProDOT and P(ProDOT-EO-ester) homopolymers coated Si/graphene, respectively, confirming that the copolymerization improves the electron conduction. By Mott-Schottky measurements, increasing mole fraction of ProDOT-EO-ester 2 in copolymer composition results in the alteration of semiconducting behavior. The developed graphene-polymer hybrid electrodes can be a potential candidate for energy storage devices.

UR - http://www.scopus.com/inward/record.url?scp=85084930792&partnerID=8YFLogxK

U2 - 10.1149/1945-7111/ab7f85

DO - 10.1149/1945-7111/ab7f85

M3 - Article

VL - 167.2020

JO - Journal of the Electrochemical Society

JF - Journal of the Electrochemical Society

SN - 0013-4651

IS - 7

M1 - 070543

ER -