High pressure die casting of Fe-based metallic glass

Research output: Contribution to journalArticleResearchpeer-review

Standard

High pressure die casting of Fe-based metallic glass. / Ramasamy, Parthiban; Szabo, Attila; Borzel, Stefan et al.
In: Scientific reports (London : Nature Publishing Group), Vol. 6.2016, 35258, 11.10.2016.

Research output: Contribution to journalArticleResearchpeer-review

APA

Vancouver

Ramasamy P, Szabo A, Borzel S, Eckert J, Stoica M, Bárdos A. High pressure die casting of Fe-based metallic glass. Scientific reports (London : Nature Publishing Group). 2016 Oct 11;6.2016:35258. doi: 10.1038/srep35258

Author

Ramasamy, Parthiban ; Szabo, Attila ; Borzel, Stefan et al. / High pressure die casting of Fe-based metallic glass. In: Scientific reports (London : Nature Publishing Group). 2016 ; Vol. 6.2016.

Bibtex - Download

@article{881310c213c04c0db1f11b64d2daa973,
title = "High pressure die casting of Fe-based metallic glass",
abstract = "Soft ferromagnetic Fe-based bulk metallic glass key-shaped specimens with a maximum and minimum width of 25.4 and 5 mm, respectively, were successfully produced using a high pressure die casting (HPDC) method, The influence of die material, alloy temperature and flow rate on the microstructure, thermal stability and soft ferromagnetic properties has been studied. The results suggest that a steel die in which the molten metal flows at low rate and high temperature can be used to produce completely glassy samples. This can be attributed to the laminar filling of the mold and to a lower heat transfer coefficient, which avoids the skin effect in the steel mold. In addition, magnetic measurements reveal that the amorphous structure of the material is maintained throughout the key-shaped samples. Although it is difficult to control the flow and cooling rate of the molten metal in the corners of the key due to different cross sections, this can be overcome by proper tool geometry. The present results confirm that HPDC is a suitable method for the casting of Fe-based bulk glassy alloys even with complex geometries for a broad range of applications.",
author = "Parthiban Ramasamy and Attila Szabo and Stefan Borzel and J{\"u}rgen Eckert and Mihai Stoica and Andr{\'a}s B{\'a}rdos",
year = "2016",
month = oct,
day = "11",
doi = "10.1038/srep35258",
language = "English",
volume = "6.2016",
journal = "Scientific reports (London : Nature Publishing Group)",
issn = "2045-2322",
publisher = "Nature Publishing Group",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - High pressure die casting of Fe-based metallic glass

AU - Ramasamy, Parthiban

AU - Szabo, Attila

AU - Borzel, Stefan

AU - Eckert, Jürgen

AU - Stoica, Mihai

AU - Bárdos, András

PY - 2016/10/11

Y1 - 2016/10/11

N2 - Soft ferromagnetic Fe-based bulk metallic glass key-shaped specimens with a maximum and minimum width of 25.4 and 5 mm, respectively, were successfully produced using a high pressure die casting (HPDC) method, The influence of die material, alloy temperature and flow rate on the microstructure, thermal stability and soft ferromagnetic properties has been studied. The results suggest that a steel die in which the molten metal flows at low rate and high temperature can be used to produce completely glassy samples. This can be attributed to the laminar filling of the mold and to a lower heat transfer coefficient, which avoids the skin effect in the steel mold. In addition, magnetic measurements reveal that the amorphous structure of the material is maintained throughout the key-shaped samples. Although it is difficult to control the flow and cooling rate of the molten metal in the corners of the key due to different cross sections, this can be overcome by proper tool geometry. The present results confirm that HPDC is a suitable method for the casting of Fe-based bulk glassy alloys even with complex geometries for a broad range of applications.

AB - Soft ferromagnetic Fe-based bulk metallic glass key-shaped specimens with a maximum and minimum width of 25.4 and 5 mm, respectively, were successfully produced using a high pressure die casting (HPDC) method, The influence of die material, alloy temperature and flow rate on the microstructure, thermal stability and soft ferromagnetic properties has been studied. The results suggest that a steel die in which the molten metal flows at low rate and high temperature can be used to produce completely glassy samples. This can be attributed to the laminar filling of the mold and to a lower heat transfer coefficient, which avoids the skin effect in the steel mold. In addition, magnetic measurements reveal that the amorphous structure of the material is maintained throughout the key-shaped samples. Although it is difficult to control the flow and cooling rate of the molten metal in the corners of the key due to different cross sections, this can be overcome by proper tool geometry. The present results confirm that HPDC is a suitable method for the casting of Fe-based bulk glassy alloys even with complex geometries for a broad range of applications.

UR - http://www.scopus.com/inward/record.url?scp=84991396800&partnerID=8YFLogxK

U2 - 10.1038/srep35258

DO - 10.1038/srep35258

M3 - Article

AN - SCOPUS:84991396800

VL - 6.2016

JO - Scientific reports (London : Nature Publishing Group)

JF - Scientific reports (London : Nature Publishing Group)

SN - 2045-2322

M1 - 35258

ER -