Fatigue Design Methodology for Short Fibre Reinforced Polymers Considering Fibre Orientation and Weld Lines
Research output: Contribution to conference › Presentation › Research
Standard
2016. Polymer Processing Society Asia/Australia Conference 2016, Chengdu, China.
Research output: Contribution to conference › Presentation › Research
Harvard
APA
Vancouver
Author
Bibtex - Download
}
RIS (suitable for import to EndNote) - Download
TY - CONF
T1 - Fatigue Design Methodology for Short Fibre Reinforced Polymers Considering Fibre Orientation and Weld Lines
AU - Primetzhofer, Andreas
AU - Mösenbacher, Andreas
AU - Pinter, Gerald
PY - 2016/10/12
Y1 - 2016/10/12
N2 - Due to rising demands regarding for light weight design, nowadays metal parts especially in the automotive industry are often superseded by parts made of short glass fibre reinforced (sgfr) plastics. Their high specific strength, formability and good process ability allow the adaptability for many requirements. To use the light weight potential and shortening development time, an improved knowledge about the fatigue behaviour of these materials is essential. As shown in [1], the concept of local S/N-curves is well applicable for these group of materials.The material behaviour of sgfr plastics is manly effected by the fibre orientation. Furthermore influences caused by environmental conditions like temperature, moisture absorption and ambient media etc. have to taken into account. Validation on complex shaped components show a good correlation between experimental and simulation results.
AB - Due to rising demands regarding for light weight design, nowadays metal parts especially in the automotive industry are often superseded by parts made of short glass fibre reinforced (sgfr) plastics. Their high specific strength, formability and good process ability allow the adaptability for many requirements. To use the light weight potential and shortening development time, an improved knowledge about the fatigue behaviour of these materials is essential. As shown in [1], the concept of local S/N-curves is well applicable for these group of materials.The material behaviour of sgfr plastics is manly effected by the fibre orientation. Furthermore influences caused by environmental conditions like temperature, moisture absorption and ambient media etc. have to taken into account. Validation on complex shaped components show a good correlation between experimental and simulation results.
KW - manufacturing
KW - Mechanical properties
KW - Enviromental conditions
KW - local S/N-curve
M3 - Presentation
T2 - Polymer Processing Society Asia/Australia Conference 2016
Y2 - 11 October 2016 through 14 October 2016
ER -
