Effect of interfacial polarization and water absorption on the dielectric properties of epoxy-nanocomposites

Research output: Contribution to journalArticleResearchpeer-review

Standard

Effect of interfacial polarization and water absorption on the dielectric properties of epoxy-nanocomposites. / Marx, Philipp; Wanner, Andrea J.; Zhang, Zucong et al.
In: Polymers, Vol. 9.2017, No. 6, 195, 28.05.2017.

Research output: Contribution to journalArticleResearchpeer-review

Vancouver

Marx P, Wanner AJ, Zhang Z, Jin H, Tsekmes IA, Smit JJ et al. Effect of interfacial polarization and water absorption on the dielectric properties of epoxy-nanocomposites. Polymers. 2017 May 28;9.2017(6):195. doi: 10.3390/polym9060195

Bibtex - Download

@article{35c93f0057154befbe2125a7c3cc57e4,
title = "Effect of interfacial polarization and water absorption on the dielectric properties of epoxy-nanocomposites",
abstract = "Five types of nanofillers, namely, silica, surface-silylated silica, alumina, surface-silylated alumina, and boron nitride, were tested in this study. Nanocomposites composed of an epoxy/amine resin and one of the five types of nanoparticles were tested as dielectrics with a focus on (i) the surface functionalization of the nanoparticles and (ii) the water absorption by the materials. The dispersability of the nanoparticles in the resin correlated with the composition (OH content) of their surfaces. The interfacial polarization of the thoroughly dried samples was found to increase at lowered frequencies and increased temperatures. The β relaxation, unlike the interfacial polarization, was not significantly increased at elevated temperatures (below the glass-transition temperature). Upon the absorption of water under ambient conditions, the interfacial polarization increased significantly, and the insulating properties decreased or even deteriorated. This effect was most pronounced in the nanocomposite containing silica, and occurred as well in the nanocomposites containing silylated silica or non-functionalized alumina. The alternating current (AC) breakdown strength of all specimens was in the range of 30 to 35 kV·mm−1. In direct current (DC) breakdown tests, the epoxy resin exhibited the lowest strength of 110 kV·mm−1; the nanocomposite containing surface-silylated alumina had a strength of 170 kV·mm−1. In summary, water absorption had the most relevant impact on the dielectric properties of nanocomposites containing nanoparticles, the surfaces of which interacted with the water molecules. Nanocomposites containing silylated alumina particles or boron nitride showed the best dielectric properties in this study.",
keywords = "Epoxy resins, Interfacial polarization, Loss factor, Nanoparticles, Permittivity, Silylating agent, Surface functionalization, Thermal conductivity, Water uptake",
author = "Philipp Marx and Wanner, {Andrea J.} and Zucong Zhang and Huifei Jin and Tsekmes, {Ioannis Alexandros} and Smit, {Johan J.} and Wolfgang Kern and Frank Wiesbrock",
year = "2017",
month = may,
day = "28",
doi = "10.3390/polym9060195",
language = "English",
volume = "9.2017",
journal = "Polymers",
issn = "2073-4360",
publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",
number = "6",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Effect of interfacial polarization and water absorption on the dielectric properties of epoxy-nanocomposites

AU - Marx, Philipp

AU - Wanner, Andrea J.

AU - Zhang, Zucong

AU - Jin, Huifei

AU - Tsekmes, Ioannis Alexandros

AU - Smit, Johan J.

AU - Kern, Wolfgang

AU - Wiesbrock, Frank

PY - 2017/5/28

Y1 - 2017/5/28

N2 - Five types of nanofillers, namely, silica, surface-silylated silica, alumina, surface-silylated alumina, and boron nitride, were tested in this study. Nanocomposites composed of an epoxy/amine resin and one of the five types of nanoparticles were tested as dielectrics with a focus on (i) the surface functionalization of the nanoparticles and (ii) the water absorption by the materials. The dispersability of the nanoparticles in the resin correlated with the composition (OH content) of their surfaces. The interfacial polarization of the thoroughly dried samples was found to increase at lowered frequencies and increased temperatures. The β relaxation, unlike the interfacial polarization, was not significantly increased at elevated temperatures (below the glass-transition temperature). Upon the absorption of water under ambient conditions, the interfacial polarization increased significantly, and the insulating properties decreased or even deteriorated. This effect was most pronounced in the nanocomposite containing silica, and occurred as well in the nanocomposites containing silylated silica or non-functionalized alumina. The alternating current (AC) breakdown strength of all specimens was in the range of 30 to 35 kV·mm−1. In direct current (DC) breakdown tests, the epoxy resin exhibited the lowest strength of 110 kV·mm−1; the nanocomposite containing surface-silylated alumina had a strength of 170 kV·mm−1. In summary, water absorption had the most relevant impact on the dielectric properties of nanocomposites containing nanoparticles, the surfaces of which interacted with the water molecules. Nanocomposites containing silylated alumina particles or boron nitride showed the best dielectric properties in this study.

AB - Five types of nanofillers, namely, silica, surface-silylated silica, alumina, surface-silylated alumina, and boron nitride, were tested in this study. Nanocomposites composed of an epoxy/amine resin and one of the five types of nanoparticles were tested as dielectrics with a focus on (i) the surface functionalization of the nanoparticles and (ii) the water absorption by the materials. The dispersability of the nanoparticles in the resin correlated with the composition (OH content) of their surfaces. The interfacial polarization of the thoroughly dried samples was found to increase at lowered frequencies and increased temperatures. The β relaxation, unlike the interfacial polarization, was not significantly increased at elevated temperatures (below the glass-transition temperature). Upon the absorption of water under ambient conditions, the interfacial polarization increased significantly, and the insulating properties decreased or even deteriorated. This effect was most pronounced in the nanocomposite containing silica, and occurred as well in the nanocomposites containing silylated silica or non-functionalized alumina. The alternating current (AC) breakdown strength of all specimens was in the range of 30 to 35 kV·mm−1. In direct current (DC) breakdown tests, the epoxy resin exhibited the lowest strength of 110 kV·mm−1; the nanocomposite containing surface-silylated alumina had a strength of 170 kV·mm−1. In summary, water absorption had the most relevant impact on the dielectric properties of nanocomposites containing nanoparticles, the surfaces of which interacted with the water molecules. Nanocomposites containing silylated alumina particles or boron nitride showed the best dielectric properties in this study.

KW - Epoxy resins

KW - Interfacial polarization

KW - Loss factor

KW - Nanoparticles

KW - Permittivity

KW - Silylating agent

KW - Surface functionalization

KW - Thermal conductivity

KW - Water uptake

UR - http://www.scopus.com/inward/record.url?scp=85020270533&partnerID=8YFLogxK

U2 - 10.3390/polym9060195

DO - 10.3390/polym9060195

M3 - Article

AN - SCOPUS:85020270533

VL - 9.2017

JO - Polymers

JF - Polymers

SN - 2073-4360

IS - 6

M1 - 195

ER -