TY - JOUR

T1 - Dislocation Movement Induced by Molecular Relaxations in Isotactic Polypropylene

AU - Spieckermann, Florian

AU - Polt, Gerald

AU - Wilhelm, Harald

AU - Kerber, Michael B.

AU - Schafler, Erhard

AU - Reinecker, Marius

AU - Soprunyuk, Viktor

AU - Bernstorff, Sigrid

AU - Zehetbauer, Michael

PY - 2017/8/21

Y1 - 2017/8/21

N2 - The thermal stability of deformation-induced dislocations was investigated in polypropylene (PP) during annealing by means of in-situ X-ray diffraction using synchrotron radiation. The samples were cold rolled to high strains (ε = 1.2) in order to introduce a high number of dislocation lattice defects and immediately stored in liquid nitrogen afterward. Then, stepwise annealing was applied from −180 °C up to above the melting temperature (165 °C) while synchrotron X-ray diffraction patterns were recorded at each step. The resulting low noise, high angular resolution diffraction patterns were evaluated using multireflection X-ray profile analysis (MXPA), revealing parameters such as the dislocation density and the thickness of the crystalline lamellae as a function of the annealing temperature. Two significant decreases of the dislocation density were found at annealing temperatures of about 10 and 85 °C. These distinct changes in the dislocation density could be identified as the mechanisms of β- and α-relaxation, respectively, by performing additional dynamic mechanical thermal analysis (DMTA). This behavior could be attributed to an increased intrinsic mobility of the macromolecules at these temperatures accompanied by thermal activation of dislocations, resulting in their mutual annihilation or their movement into the adjacent amorphous phase. The reduction of the dislocation density at the glass transition (β-relaxation) occurs because the stabilizing effect of backstresses originating from the amorphous phase is lost. At the α-relaxation the reduction in the dislocation density is attributed to defect propagations within the crystalline lamellae as well as in the amorphous phase and the recrystallization of intralamellar mosaic blocks (i.e., grains).

AB - The thermal stability of deformation-induced dislocations was investigated in polypropylene (PP) during annealing by means of in-situ X-ray diffraction using synchrotron radiation. The samples were cold rolled to high strains (ε = 1.2) in order to introduce a high number of dislocation lattice defects and immediately stored in liquid nitrogen afterward. Then, stepwise annealing was applied from −180 °C up to above the melting temperature (165 °C) while synchrotron X-ray diffraction patterns were recorded at each step. The resulting low noise, high angular resolution diffraction patterns were evaluated using multireflection X-ray profile analysis (MXPA), revealing parameters such as the dislocation density and the thickness of the crystalline lamellae as a function of the annealing temperature. Two significant decreases of the dislocation density were found at annealing temperatures of about 10 and 85 °C. These distinct changes in the dislocation density could be identified as the mechanisms of β- and α-relaxation, respectively, by performing additional dynamic mechanical thermal analysis (DMTA). This behavior could be attributed to an increased intrinsic mobility of the macromolecules at these temperatures accompanied by thermal activation of dislocations, resulting in their mutual annihilation or their movement into the adjacent amorphous phase. The reduction of the dislocation density at the glass transition (β-relaxation) occurs because the stabilizing effect of backstresses originating from the amorphous phase is lost. At the α-relaxation the reduction in the dislocation density is attributed to defect propagations within the crystalline lamellae as well as in the amorphous phase and the recrystallization of intralamellar mosaic blocks (i.e., grains).

U2 - 10.1021/acs.macromol.7b00931

DO - 10.1021/acs.macromol.7b00931

M3 - Article

VL - 50.2017

SP - 6362

EP - 6368

JO - Macromolecules

JF - Macromolecules

SN - 0024-9297

IS - 17

ER -