Designing advanced intermetallic titanium aluminide alloys for additive manufacturing

Research output: Contribution to journalArticleResearchpeer-review

Standard

Designing advanced intermetallic titanium aluminide alloys for additive manufacturing. / Wimler, David; Lindemann, Janny; Reith, Marcel et al.
In: Intermetallics, Vol. 131.2021, No. April, 107109, 04.2021, p. 1-10.

Research output: Contribution to journalArticleResearchpeer-review

Harvard

Wimler, D, Lindemann, J, Reith, M, Kirchner, A, Allen, M, Vargas, WG, Franke, M, Klöden, B, Weißgärber, T, Güther, V, Schloffer, M, Clemens, H & Mayer, S 2021, 'Designing advanced intermetallic titanium aluminide alloys for additive manufacturing', Intermetallics, vol. 131.2021, no. April, 107109, pp. 1-10. https://doi.org/10.1016/j.intermet.2021.107109

APA

Wimler, D., Lindemann, J., Reith, M., Kirchner, A., Allen, M., Vargas, W. G., Franke, M., Klöden, B., Weißgärber, T., Güther, V., Schloffer, M., Clemens, H., & Mayer, S. (2021). Designing advanced intermetallic titanium aluminide alloys for additive manufacturing. Intermetallics, 131.2021(April), 1-10. Article 107109. https://doi.org/10.1016/j.intermet.2021.107109

Vancouver

Wimler D, Lindemann J, Reith M, Kirchner A, Allen M, Vargas WG et al. Designing advanced intermetallic titanium aluminide alloys for additive manufacturing. Intermetallics. 2021 Apr;131.2021(April):1-10. 107109. Epub 2021 Jan 22. doi: 10.1016/j.intermet.2021.107109

Author

Wimler, David ; Lindemann, Janny ; Reith, Marcel et al. / Designing advanced intermetallic titanium aluminide alloys for additive manufacturing. In: Intermetallics. 2021 ; Vol. 131.2021, No. April. pp. 1-10.

Bibtex - Download

@article{873c28bb90f645f69b5155cc70f4af6a,
title = "Designing advanced intermetallic titanium aluminide alloys for additive manufacturing",
abstract = "Lightweight intermetallic γ-TiAl based alloys are innovative high-temperature structural materials. So far, these alloys are in use as turbine blades or turbocharger turbine wheels in advanced aerospace and automotive engines, where they are produced by means of investment casting as well as wrought processing, e.g. hot-forging. Through the development of powder-based additive manufacturing processes within the last decade, a real paradigm shift for future component production as well as their design and materials properties was created. While so-called proven alloy systems are presently used worldwide for additive manufacturing, the approach of this work is the development of novel process-adapted γ-TiAl based alloys, which on the one hand fulfill the specific requirements of additive manufacturing and on the other hand provide excellent high temperature properties after a suitable heat treatment. Based on the concept of an engineering γ-TiAl based alloy, i.e. the so-called TNM alloy, two alloys are presented. Due to the chemical reactivity of titanium aluminide alloys, electron beam melting processes come into consideration as production methods using optimized manufacturing parameters, providing dense components with only small variations in the Al content between the individual powder layers, which is a decisive factor for the subsequent heat treatment above the γ solvus temperature. The additively produced samples show a fine equiaxed microstructure, whereas the heat-treated samples exhibit a fully lamellar α₂/γ microstructure with an excellent creep resistance. In summary, the adaptation of the additive manufacturing parameters in combination with innovative alloys and subsequent heat treatments are the basis for producing reliable high-performance TiAl components in the near future.",
author = "David Wimler and Janny Lindemann and Marcel Reith and Alexander Kirchner and Melissa Allen and Vargas, {Wilfredo Garcia} and Martin Franke and Burghardt Kl{\"o}den and Thomas Wei{\ss}g{\"a}rber and Volker G{\"u}ther and Martin Schloffer and Helmut Clemens and Svea Mayer",
year = "2021",
month = apr,
doi = "10.1016/j.intermet.2021.107109",
language = "English",
volume = "131.2021",
pages = "1--10",
journal = "Intermetallics",
issn = "0966-9795",
publisher = "Elsevier",
number = "April",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Designing advanced intermetallic titanium aluminide alloys for additive manufacturing

AU - Wimler, David

AU - Lindemann, Janny

AU - Reith, Marcel

AU - Kirchner, Alexander

AU - Allen, Melissa

AU - Vargas, Wilfredo Garcia

AU - Franke, Martin

AU - Klöden, Burghardt

AU - Weißgärber, Thomas

AU - Güther, Volker

AU - Schloffer, Martin

AU - Clemens, Helmut

AU - Mayer, Svea

PY - 2021/4

Y1 - 2021/4

N2 - Lightweight intermetallic γ-TiAl based alloys are innovative high-temperature structural materials. So far, these alloys are in use as turbine blades or turbocharger turbine wheels in advanced aerospace and automotive engines, where they are produced by means of investment casting as well as wrought processing, e.g. hot-forging. Through the development of powder-based additive manufacturing processes within the last decade, a real paradigm shift for future component production as well as their design and materials properties was created. While so-called proven alloy systems are presently used worldwide for additive manufacturing, the approach of this work is the development of novel process-adapted γ-TiAl based alloys, which on the one hand fulfill the specific requirements of additive manufacturing and on the other hand provide excellent high temperature properties after a suitable heat treatment. Based on the concept of an engineering γ-TiAl based alloy, i.e. the so-called TNM alloy, two alloys are presented. Due to the chemical reactivity of titanium aluminide alloys, electron beam melting processes come into consideration as production methods using optimized manufacturing parameters, providing dense components with only small variations in the Al content between the individual powder layers, which is a decisive factor for the subsequent heat treatment above the γ solvus temperature. The additively produced samples show a fine equiaxed microstructure, whereas the heat-treated samples exhibit a fully lamellar α₂/γ microstructure with an excellent creep resistance. In summary, the adaptation of the additive manufacturing parameters in combination with innovative alloys and subsequent heat treatments are the basis for producing reliable high-performance TiAl components in the near future.

AB - Lightweight intermetallic γ-TiAl based alloys are innovative high-temperature structural materials. So far, these alloys are in use as turbine blades or turbocharger turbine wheels in advanced aerospace and automotive engines, where they are produced by means of investment casting as well as wrought processing, e.g. hot-forging. Through the development of powder-based additive manufacturing processes within the last decade, a real paradigm shift for future component production as well as their design and materials properties was created. While so-called proven alloy systems are presently used worldwide for additive manufacturing, the approach of this work is the development of novel process-adapted γ-TiAl based alloys, which on the one hand fulfill the specific requirements of additive manufacturing and on the other hand provide excellent high temperature properties after a suitable heat treatment. Based on the concept of an engineering γ-TiAl based alloy, i.e. the so-called TNM alloy, two alloys are presented. Due to the chemical reactivity of titanium aluminide alloys, electron beam melting processes come into consideration as production methods using optimized manufacturing parameters, providing dense components with only small variations in the Al content between the individual powder layers, which is a decisive factor for the subsequent heat treatment above the γ solvus temperature. The additively produced samples show a fine equiaxed microstructure, whereas the heat-treated samples exhibit a fully lamellar α₂/γ microstructure with an excellent creep resistance. In summary, the adaptation of the additive manufacturing parameters in combination with innovative alloys and subsequent heat treatments are the basis for producing reliable high-performance TiAl components in the near future.

UR - http://www.scopus.com/inward/record.url?scp=85099627551&partnerID=8YFLogxK

U2 - 10.1016/j.intermet.2021.107109

DO - 10.1016/j.intermet.2021.107109

M3 - Article

VL - 131.2021

SP - 1

EP - 10

JO - Intermetallics

JF - Intermetallics

SN - 0966-9795

IS - April

M1 - 107109

ER -