TY - JOUR

T1 - Deformation Behavior of Designed Dual-Phase CuZr Metallic Glasses

AU - Peng, C.X.

AU - Sopu, Daniel

AU - Cheng, Yun

AU - Song, Kai Kai

AU - Wang, Shenghai

AU - Eckert, Jürgen

AU - Wang, L.

PY - 2019/2/16

Y1 - 2019/2/16

N2 - A nanometer-scale second phase in metallic glass (MG) heterostructures is effective to improve mechanical properties. In this work, molecular dynamics simulations are conducted to investigate the influence of various critical structural aspects such as the size/volume fraction, distribution of a nanoscale secondary phase and different combinations of the matrix and the secondary phase on the deformation behavior of dual-phase MGs. We find an obvious change in deformation mode with varying the size/fraction and the chemical composition of the secondary phase. When the yield stress of the dual-phase MGs is lower than critical shear stresses required for forming a mature shear band (SB), the MGs show homogeneous deformation. Otherwise, those dual-phase MGs with inclusions smaller than width of the SB or that cannot confine plastic zones between the larger inclusions have high tendency for shear instability and brittle failure. By systematically varying the characteristics of the secondary phase one can design MGs with improved mechanical properties.

AB - A nanometer-scale second phase in metallic glass (MG) heterostructures is effective to improve mechanical properties. In this work, molecular dynamics simulations are conducted to investigate the influence of various critical structural aspects such as the size/volume fraction, distribution of a nanoscale secondary phase and different combinations of the matrix and the secondary phase on the deformation behavior of dual-phase MGs. We find an obvious change in deformation mode with varying the size/fraction and the chemical composition of the secondary phase. When the yield stress of the dual-phase MGs is lower than critical shear stresses required for forming a mature shear band (SB), the MGs show homogeneous deformation. Otherwise, those dual-phase MGs with inclusions smaller than width of the SB or that cannot confine plastic zones between the larger inclusions have high tendency for shear instability and brittle failure. By systematically varying the characteristics of the secondary phase one can design MGs with improved mechanical properties.

UR - http://www.scopus.com/inward/record.url?scp=85061727147&partnerID=8YFLogxK

U2 - 10.1016/j.matdes.2019.107662

DO - 10.1016/j.matdes.2019.107662

M3 - Article

VL - 168.2019

JO - Materials and Design

JF - Materials and Design

SN - 0261-3069

IS - 15 April

M1 - 107662

ER -