Defects in a laser powder bed fused tool steel

Research output: Contribution to journalArticleResearchpeer-review

Standard

Defects in a laser powder bed fused tool steel. / Platl, Jan; Leitner, Harald; Turk, Christoph et al.
In: Advanced engineering materials, Vol. 2020, No. 2000833, 2000833 , 13.10.2020.

Research output: Contribution to journalArticleResearchpeer-review

Harvard

Platl, J, Leitner, H, Turk, C, Demir, AG, Previtali, B & Schnitzer, R 2020, 'Defects in a laser powder bed fused tool steel', Advanced engineering materials, vol. 2020, no. 2000833, 2000833 . https://doi.org/10.1002/adem.202000833

APA

Platl, J., Leitner, H., Turk, C., Demir, A. G., Previtali, B., & Schnitzer, R. (2020). Defects in a laser powder bed fused tool steel. Advanced engineering materials, 2020(2000833), Article 2000833 . Advance online publication. https://doi.org/10.1002/adem.202000833

Vancouver

Platl J, Leitner H, Turk C, Demir AG, Previtali B, Schnitzer R. Defects in a laser powder bed fused tool steel. Advanced engineering materials. 2020 Oct 13;2020(2000833):2000833 . Epub 2020 Oct 13. doi: 10.1002/adem.202000833

Author

Platl, Jan ; Leitner, Harald ; Turk, Christoph et al. / Defects in a laser powder bed fused tool steel. In: Advanced engineering materials. 2020 ; Vol. 2020, No. 2000833.

Bibtex - Download

@article{e0aa09e4442b4e3cb3b741272a0e2c49,
title = "Defects in a laser powder bed fused tool steel",
abstract = "Compared to conventional fabrication methods, additive manufacturing (AM) introduces new opportunities in terms of design freedom and part complexity due to the incremental layer-by-layer process. For tooling applications, higher cutting speeds can be realized by implementing of internal cooling channels in tools that could not be fabricated otherwise. However, processability of high-alloyed tool steels with laser powder bed fusion (LPBF) faces certain restrictions. In addition to pore formation, severe cracking caused by a combination of process-related stresses due to the high thermal gradient and susceptible materials may occur. This work aims to clarify the occurrence of process-related defects in dependence of the applied energy input of a high-alloyed cold-work tool steel and to correlate it to the evolution of microstructure respectively solidification structure. Defect surfaces and structural evolution are investigated. The results exhibit that with increasing energy input porosity changes from lack-of-fusion to keyhole porosity. Most recently published investigations suggest cold cracking as predominant failure mechanism during LPBF of tool steels. However, for the investigated material, the present study clearly reveals that, irrespective of the chosen energy input, hot cracks are formed. Crack propagation can be connected to the solidification structure and possible thermal stress accumulations caused by the process.",
author = "Jan Platl and Harald Leitner and Christoph Turk and Demir, {Ali G{\"o}khan} and Barbara Previtali and Ronald Schnitzer",
note = "Publisher Copyright: {\textcopyright} 2020 Wiley-VCH GmbH",
year = "2020",
month = oct,
day = "13",
doi = "10.1002/adem.202000833",
language = "English",
volume = "2020",
journal = " Advanced engineering materials",
issn = "1438-1656",
publisher = "Wiley-VCH ",
number = "2000833",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Defects in a laser powder bed fused tool steel

AU - Platl, Jan

AU - Leitner, Harald

AU - Turk, Christoph

AU - Demir, Ali Gökhan

AU - Previtali, Barbara

AU - Schnitzer, Ronald

N1 - Publisher Copyright: © 2020 Wiley-VCH GmbH

PY - 2020/10/13

Y1 - 2020/10/13

N2 - Compared to conventional fabrication methods, additive manufacturing (AM) introduces new opportunities in terms of design freedom and part complexity due to the incremental layer-by-layer process. For tooling applications, higher cutting speeds can be realized by implementing of internal cooling channels in tools that could not be fabricated otherwise. However, processability of high-alloyed tool steels with laser powder bed fusion (LPBF) faces certain restrictions. In addition to pore formation, severe cracking caused by a combination of process-related stresses due to the high thermal gradient and susceptible materials may occur. This work aims to clarify the occurrence of process-related defects in dependence of the applied energy input of a high-alloyed cold-work tool steel and to correlate it to the evolution of microstructure respectively solidification structure. Defect surfaces and structural evolution are investigated. The results exhibit that with increasing energy input porosity changes from lack-of-fusion to keyhole porosity. Most recently published investigations suggest cold cracking as predominant failure mechanism during LPBF of tool steels. However, for the investigated material, the present study clearly reveals that, irrespective of the chosen energy input, hot cracks are formed. Crack propagation can be connected to the solidification structure and possible thermal stress accumulations caused by the process.

AB - Compared to conventional fabrication methods, additive manufacturing (AM) introduces new opportunities in terms of design freedom and part complexity due to the incremental layer-by-layer process. For tooling applications, higher cutting speeds can be realized by implementing of internal cooling channels in tools that could not be fabricated otherwise. However, processability of high-alloyed tool steels with laser powder bed fusion (LPBF) faces certain restrictions. In addition to pore formation, severe cracking caused by a combination of process-related stresses due to the high thermal gradient and susceptible materials may occur. This work aims to clarify the occurrence of process-related defects in dependence of the applied energy input of a high-alloyed cold-work tool steel and to correlate it to the evolution of microstructure respectively solidification structure. Defect surfaces and structural evolution are investigated. The results exhibit that with increasing energy input porosity changes from lack-of-fusion to keyhole porosity. Most recently published investigations suggest cold cracking as predominant failure mechanism during LPBF of tool steels. However, for the investigated material, the present study clearly reveals that, irrespective of the chosen energy input, hot cracks are formed. Crack propagation can be connected to the solidification structure and possible thermal stress accumulations caused by the process.

UR - http://www.scopus.com/inward/record.url?scp=85093942878&partnerID=8YFLogxK

U2 - 10.1002/adem.202000833

DO - 10.1002/adem.202000833

M3 - Article

VL - 2020

JO - Advanced engineering materials

JF - Advanced engineering materials

SN - 1438-1656

IS - 2000833

M1 - 2000833

ER -