Characterization of Zr-Containing Dispersoids in Al–Zn–Mg–Cu Alloys by Small-Angle Scattering

Research output: Contribution to journalArticleResearchpeer-review

Standard

Characterization of Zr-Containing Dispersoids in Al–Zn–Mg–Cu Alloys by Small-Angle Scattering. / Honaramooz, Mohammadtaha; Morak, Roland; Pogatscher, Stefan et al.
In: Materials, Vol. 16.2023, No. 3, 1213, 31.01.2023.

Research output: Contribution to journalArticleResearchpeer-review

Bibtex - Download

@article{69bb563a636b4f4a9b11c92f149a2a5c,
title = "Characterization of Zr-Containing Dispersoids in Al–Zn–Mg–Cu Alloys by Small-Angle Scattering",
abstract = "The characterization of Zr-containing dispersoids in aluminum alloys is challenging due to their broad size distribution, low volume fraction, and heterogeneous distribution within the grains. In this work, small-angle X-ray scattering (SAXS) and small-angle neutron scattering (SANS) were compared to scanning electron microscopy (SEM) and transmission electron microscopy (TEM) regarding their capability to characterize Zr-containing dispersoids in aluminum alloys. It was demonstrated that both scattering techniques are suitable tools to characterize dispersoids in a multi-phase industrial 7xxx series aluminum alloy. While SAXS is more sensitive than SANS due to the high electron density of Zr-containing dispersoids, SANS has the advantage of being able to probe a much larger sample volume. The combination of both scattering techniques allows for the verification that the contribution from dispersoids can be separated from that of other precipitate phases such as the S-phase or GP-zones. The size distributions obtained from SAXS, SANS and TEM showed good agreement. The SEM-derived size distributions were, however, found to significantly deviate from those of the other techniques, which can be explained by considering the resolution-limited restrictions of the different techniques.",
keywords = "Al–Zn–Mg–Cu, SANS, SAXS, size distribution, Zr-containing dispersoid",
author = "Mohammadtaha Honaramooz and Roland Morak and Stefan Pogatscher and Gerhard Popovski and Thomas Kremmer and Thomas Meisel and {\"O}sterreicher, {Johannes A} and Aurel Arnoldt and Oskar Paris",
note = "Publisher Copyright: {\textcopyright} 2023 by the authors.",
year = "2023",
month = jan,
day = "31",
doi = "10.3390/ma16031213",
language = "English",
volume = "16.2023",
journal = " Materials",
issn = "1996-1944",
publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",
number = "3",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Characterization of Zr-Containing Dispersoids in Al–Zn–Mg–Cu Alloys by Small-Angle Scattering

AU - Honaramooz, Mohammadtaha

AU - Morak, Roland

AU - Pogatscher, Stefan

AU - Popovski, Gerhard

AU - Kremmer, Thomas

AU - Meisel, Thomas

AU - Österreicher, Johannes A

AU - Arnoldt, Aurel

AU - Paris, Oskar

N1 - Publisher Copyright: © 2023 by the authors.

PY - 2023/1/31

Y1 - 2023/1/31

N2 - The characterization of Zr-containing dispersoids in aluminum alloys is challenging due to their broad size distribution, low volume fraction, and heterogeneous distribution within the grains. In this work, small-angle X-ray scattering (SAXS) and small-angle neutron scattering (SANS) were compared to scanning electron microscopy (SEM) and transmission electron microscopy (TEM) regarding their capability to characterize Zr-containing dispersoids in aluminum alloys. It was demonstrated that both scattering techniques are suitable tools to characterize dispersoids in a multi-phase industrial 7xxx series aluminum alloy. While SAXS is more sensitive than SANS due to the high electron density of Zr-containing dispersoids, SANS has the advantage of being able to probe a much larger sample volume. The combination of both scattering techniques allows for the verification that the contribution from dispersoids can be separated from that of other precipitate phases such as the S-phase or GP-zones. The size distributions obtained from SAXS, SANS and TEM showed good agreement. The SEM-derived size distributions were, however, found to significantly deviate from those of the other techniques, which can be explained by considering the resolution-limited restrictions of the different techniques.

AB - The characterization of Zr-containing dispersoids in aluminum alloys is challenging due to their broad size distribution, low volume fraction, and heterogeneous distribution within the grains. In this work, small-angle X-ray scattering (SAXS) and small-angle neutron scattering (SANS) were compared to scanning electron microscopy (SEM) and transmission electron microscopy (TEM) regarding their capability to characterize Zr-containing dispersoids in aluminum alloys. It was demonstrated that both scattering techniques are suitable tools to characterize dispersoids in a multi-phase industrial 7xxx series aluminum alloy. While SAXS is more sensitive than SANS due to the high electron density of Zr-containing dispersoids, SANS has the advantage of being able to probe a much larger sample volume. The combination of both scattering techniques allows for the verification that the contribution from dispersoids can be separated from that of other precipitate phases such as the S-phase or GP-zones. The size distributions obtained from SAXS, SANS and TEM showed good agreement. The SEM-derived size distributions were, however, found to significantly deviate from those of the other techniques, which can be explained by considering the resolution-limited restrictions of the different techniques.

KW - Al–Zn–Mg–Cu

KW - SANS

KW - SAXS

KW - size distribution

KW - Zr-containing dispersoid

UR - http://www.scopus.com/inward/record.url?scp=85147842804&partnerID=8YFLogxK

U2 - 10.3390/ma16031213

DO - 10.3390/ma16031213

M3 - Article

AN - SCOPUS:85147842804

VL - 16.2023

JO - Materials

JF - Materials

SN - 1996-1944

IS - 3

M1 - 1213

ER -