Wolfgang Kern

(Former)

151 - 200 out of 413Page size: 50

Research output

  1. 2015
  2. Published

    Epoxy-anhydride based thermosets reinforced by surface modified inorganic nanoparticles: Effects on cure kinetics, thermal and thermo-mechanical properties

    Wanner, A. J., Moser, A., Brasch, M., Porubsky, T., Feuchter, M., Pinter, G. & Kern, W., 2015.

    Research output: Contribution to conference › Presentation › Research

  3. Published

    Epoxy anhydride based therosets reinforced by surface modified inorganic nanoparticles: effects on cure kinetics, thermal and thermo-mechanical properties

    Wanner, A. J., Moser, A., Brasch, M., Porubsky, T., Feuchter, M., Pinter, G. & Kern, W., 2015, PPS2015 - Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Flexible Epoxy-Based Composites with Enhanced Delamination Resistance

    Schlögl, S., Lenko, D., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W. & Kern, W., 2015.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    Flexible Epoxy-Based Composites with Enhanced Delamination Resistance

    Lenko, D., Schlögl, S., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W. & Kern, W., 2015, In: Polymer Composites. 36, p. 2238-2247

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Investigation of the Rubber-Brass Adhesion Layer Using the Olefin-Metathesis Method

    Leimgruber, S., Kern, W., Hochenauer, R., M., M., Holzner, A. & Trimmel, G., 2015, In: Rubber chemistry and technology. 88, p. 219-233

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    (Nano)Composite mit hoher Wärmeleitfähigkeit

    Wanner, A. J., Moser, A., Feuchter, M. & Kern, W., 2015.

    Research output: Contribution to conference › Presentation › Research

  8. Published

    New strategies towards reversible and mendable epoxy based materials employing [4πs+4πs] photocycloaddition and thermal cycloreversion of pendant anthracene groups

    Radl, S., Kreimer, M., Grießer, T., Oesterreicher, A., Moser, A., Kern, W. & Schlögl, S., 2015, In: Polymer. p. 76-87 80.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Olefin-Metathesis Method: A useful Fool for the Investigation of Rubber-Brass Adhesion Interfaces

    Leimgruber, S., Kern, W., Hochenauer, R., Holzner, A. & Trimmel, G., 2015.

    Research output: Contribution to conference › Poster › Research

  10. Published

    Olefin-Metathesis Method: A valuable Tool for the Investigation of Rubber-Metal Adhesion Interfaces

    Leimgruber, S., Kern, W., Hochenauer, R., Holzner, A. & Trimmel, G., 2015.

    Research output: Contribution to conference › Poster › Research

  11. Published

    Olefin-Metathesis Method h A practical Tool for the Investigation of Elastomer-Metal Adhesion Interfaces

    Leimgruber, S., Kern, W., Hochenauer, R., Holzner, A. & Trimmel, G., 2015.

    Research output: Contribution to conference › Presentation › Research

  12. Published

    Photo-patterned natural rubber surfaces with tunable tribological properties

    Manhart, J., Lenko, D., Mühlbacher, I., Hausberger, A., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 2015, In: European polymer journal. p. 236-246

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Radical induced Cationic Frontal Polymerization

    D., B., P., K., Kern, W. & Liska, R., 2015.

    Research output: Contribution to conference › Presentation › Research

  14. Published

    Strategies for the surface functionalization of (nano)-particles and their application in (nano)-composites

    Kern, W., Wanner, A. J., Rieß, G., Andraschek, N., Brasch, M., Moser, A., Bergmann, I., Ladstätter, W., Stecher, H., Zenz, C., Wallner, A., Fischer, K. & Ochs, C., 2015.

    Research output: Contribution to conference › Presentation › Research

  15. Published

    The influence of nanoscale particles on the mechanical, thermal and thermo-mechanical properties of anhydride based epoxy systems

    Feuchter, M., Moser, A., Wanner, A. J., Kern, W. & Pinter, G., 2015, EPF 2015 - Book of abstracts. p. 163 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Thermo-mechanical and dielectric properties of epoxy nanocomposites containing inorganic nanoparticles

    Kern, W., Wanner, A. J., Moser, A., Tsekmes, I. A., Kochetov, R. & Smit, J. J., 2015.

    Research output: Contribution to conference › Poster › Research

  17. Published

    UV-Induced Modulation of Tribological Characteristics: Elastomeric Materials Featuring Controlles Anisotropic Friction Properties

    Manhart, J., Hausberger, A., Mühlbacher, I., Lenko, D., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  18. 2014
  19. Published

    Mehrdimensional photostrukturierte Substrate auf der Grundlage von Monosaccharidderivaten, deren Oligomere und deren Polymere, und Herstellungsverfahren dafür

    Stana Kleinschek, K. (Inventor), Spirk, S. (Inventor), Griesser, T. (Inventor), Kern, W. (Inventor), Kargl, R. (Inventor) & Ribitsch, V. (Inventor), 1 Oct 2014, IPC No. G03F 7/ 039 A I, Patent No. EP2784586, Priority date 27 Mar 2013, Priority No. EP20130002404

    Research output: Patent

  20. Published

    Elastomerprodukt mit kovalent gebundenen Partikel

    Holzner, A. (Inventor), Kern, W. (Inventor), Lenko, D. (Inventor), Manhart, J. C. (Inventor), Schaller, R. (Inventor) & Schloegl, S. (Inventor), 16 Apr 2014, IPC No. C08K 9/ 08 A I, Patent No. EP2719710, Priority date 9 Oct 2012, Priority No. AT20120001087

    Research output: Patent

  21. Published

    Elastomerprodukt mit kovalent gebundenen Partikeln

    Schlögl, S. (Inventor), Lenko, D. (Inventor), Holzner, A. (Inventor), Kern, W. (Inventor), Schaller, R. (Inventor) & Manhart, J. (Inventor), 16 Apr 2014, Patent No. EP20130187847

    Research output: Patent

  22. Published

    Verfahren zur Modifizierung der Oberfläche eines Elastomerproduktes

    Schlögl, S. (Inventor), Holzner, A. (Inventor), Lenko, D. (Inventor), Schaller, R. (Inventor), Manhart, J. (Inventor) & Kern, W. (Inventor), 16 Apr 2014, Patent No. EP20130187837

    Research output: Patent

  23. Published

    3D Optical Waveguides Produced by Two Photon Photopolymerisation of a Flexible Silanol Terminated Polysiloxane Containing Acrylate Functional Groups

    Woods, R., Feldbacher, S., Zidar, D., Langer, G., Satzinger, V., Schmidt, V., Pucher, N., Liska, R. & Kern, W., 1 Mar 2014, In: Optical Materials Express. 4, 3, p. 486-498 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Epoxy-Based Composites with Modified Elastomeric Damping Layers: New Approaches for the Manufacture of High Voltage Insulations with Improved Delamination Resistance

    Manhart, J., Hausberger, A., Mühlbacher, I., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 2014, 22nd Annual International Conference on Composites/Nanoengineering (ICCE-22). p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Evaluation of Selected Characterization Techniques to Determine Failure Mechanisms of Epoxy-Based Composite Materials

    Kreimer, M., Lenko, D., Schlögl, S., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W. & Kern, W., 2014, 33nd Annual International Conference on Composites/Nanoenginering. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Ex situ and In situ Characterization of Patterned Photoreactive Thin Organic Surface Layers Using Friction Force Microscopy

    Shen, Q., Edler, M., Grießer, T., Knall, A.-C., Trimmel, G., Kern, W. & Teichert, C., 2014, In: Scanning. 36, p. 590-598

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Härtung von Composit-Werkstoffen durch strahlungsbasierte Prozesse

    Kern, W., Muhr, N., Rieß, G. & Schauberger, J., 2014, Hocheffiziente Verbundwerkstoffe. p. 115-123

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Nanoparticles bearing a photoreactive shell: interactions with polymer matrices and polymer surfaces

    Kern, W., Muhr, N., Rieß, G. & Schauberger, J., 2014, ESPS 2014. p. IL14-IL14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    New approaches towards the investigation on defects and failure mechanisms of insulating composites used in high voltage applications

    Lenko, D., Schlögl, S., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W., Rosc, J. & Kern, W., 2014, In: Composites Part B: Engineering. 58, p. 83-90

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    New Epoxy-Based Resins and Functional Inorganic Fillers with Tunable Mechanical Properties for the Preparation of Composite Materials with Enhanced Recyclability

    Radl, S. V., Grießer, T., Kreimer, M., Oesterreicher, A., Kern, W. & Schlögl, S., 2014, 22nd Annual International Conference on Composites/Nanoengineering (ICCE-22). p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Photo-induced crosslinking and thermal de-crosslinking in polynorbornenes bearing pendant anthracene groups

    Radl, S. V., Roth, M., Gassner, M., Wolfberger, A., Lang, A., Hirschmann, B., Trimmel, G., Kern, W. & Grießer, T., 2014, In: European polymer journal. 52, p. 98-104

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Photoreversible Crosslinking of Elastomer Materials

    Manhart, J., Fleischmann, D. D., Ayalur-Karunakaran, S., Grießer, T., Oesterreicher, A., Kern, W. & Schlögl, S., 2014, Photoreversible Crosslinking of Elastomer Materials. p. 60-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Photo-Vulcanization using thiol-ene chemistry: Film formation, morphology and network characteristics of UV crosslinked rubber latices

    Schlögl, S., Trutschel, M., Chassé, W., Letofsky-Papst, I., Schaller, R., Holzner, A., Rieß, G., Kern, W. & Saalwächter, K., 2014, In: Polymer. 55, p. 5584-5595

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Silica nanoparticles bearing a photoreactive shell: interactions with polymer matrices and polymer surfaces

    Kern, W., Muhr, N., Rieß, G. & Schauberger, J., 2014, Symposium Polymerblends & Nanocomposites: Programme & Kurzreferate. Radusch, H.-J. (ed.). Halle (Saale), p. 31-31

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Silika-Nanopartikel in Glas-Glimmer Verbundwerkstoffen

    Wanner, A. J., Moser, A., Reichmann, A., Wewerka, K., Feuchter, M., Pinter, G. & Kern, W., 2014, Leobener Kunststoff-Kolloquium. p. 201-206

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Smart composite materials bearing photoswitchable crosslinks

    Radl, S. V., Grießer, T., Kreimer, M., Oesterreicher, A., Kern, W. & Schlögl, S., 2014, 3rd European Symposium of Photopolymer Science. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Structured and Functional Elastomer-Based Composites with Tailored Friction Properties

    Manhart, J., Hausberger, A., Mühlbacher, I., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 2014, 22nd Annual International Conference of Composites/Nanoengineering (ICCE-22). p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    UV assisted microcellular foaming - A new approach towards the formation of 3D structures in offset printing techniques

    Schlögl, S., Reischl, M., Ribitsch, V. & Kern, W., 2014, UV assisted microcellular foaming - A new approach towards the formation of 3D structures in offset printing techniques. p. 50-50

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    UV-crosslinking of poly(vinyl alcohol) using cation exchanged montmorillonite

    Rieß, G., Schauberger, J. & Kern, W., 2014, 15. Problemseminar Polymerblends und Nanocomposites. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. 2013
  41. Published

    Wavelength selective refractive index modulation in a ROMP derived polymer bearing phenyl- and ortho-nitrobenzyl ester groups

    Edler, M., Mayrbrugger, S., Fian, A., Trimmel, G., Radl, S., Kern, W. & Griesser, T., 7 Jul 2013, In: Journal of Materials Chemistry C. 1, 25, p. 3931-3938 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Accelerator free crosslinking of XNBR-latex using UV techniques

    Lenko, D., Schlögl, S., Schaller, R., Holzner, A. & Kern, W., 2013, Conference Proceedings: Latex and Synthetic Polymer Dispersions 2013.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Advanced characterization techniques to determine tribological end properties of elastomeric products in contract with human skin forgoing living tissue

    Manhart, J., Lenko, D., Hausberger, A., Schloegl, S., Holzner, A., Schaller, R. & Kern, W., 2013, Book of Abstracts. p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    ADVANCED UV-CURABLE RESINS FOR ADHESION APPLICATION

    Kramer, R., Ling, Y., Puchleitner, R., Rieß, G. & Kern, W., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    Anchoring of alkylsilanes and alkylphosphonic dericates on copper surfaces

    Nothdurft, P., Feldbacher, S. & Kern, W., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  46. Published

    Cross-linking of ROMP derived polymers using the two-photon induced thiol-ene reaction: towards the fabrication of 3D-polymer microstructures

    Grießer, T., Wolfberger, A., Daschiel, U., Schmidt, V., Fian, A., Jerrar, A., Teichert, C. & Kern, W., 2013, In: Polymer Chemistry. 4, p. 1708-1714

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Development and characterization of optoelectronic circuit boards produced by two-photon polymerization using a polysiloxane containing acrylate functional groups

    Woods, R., Feldbacher, S., Langer, G., Satzinger, V., Schmid, G., Leeb, W., Kern, W. & Zidar, D., 2013, In: Applied Optics. 52, p. 388-393

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Dual cross-linking of carboxylated nitrile butadiene rubber latex employing the thiol-ene photoreaction

    Lenko, D., Schloegl, S., Temel, A., Kern, W., Schaller, R. & Holzner, A., 2013, In: Journal of Applied Polymer Science. 129, p. 2735-2743

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Dual crosslinking of carboxylated nitrile butadiene rubber latex employing the thiol-ene photoreaction

    Schlögl, S., Kern, W., Holzner, A., Schaller, R. & Lenko, D., 2013, In: Journal of Applied Polymer Science. 129, p. 2735-2743

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Investigation of the Rubber-Brass-Interface ursing the Olefin-Matathesis Method

    Leimgruber, S., Kern, W., Hochenauer, R., Holzner, A. & Trimmel, G., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Microcellular foaming with UV light – new strategies for the formation of 3D structures in offset printing techniques

    Schlögl, S., Reischl, M., Ribitsch, V. & Kern, W., 2013, The proceedings of the Austrian - Slovenian Polymer Meeting.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Nanoparticles bearing a photoreactive shell: interaction with polymers and polymer surfaces

    Kern, W., Muhr, N. & Puchleitner, R., 2013, In: European polymer journal. 49, p. 3114-3124

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    New Functional Polynorbornenes Bearing Anthracene Groups for Reversible Crosslinked Materials

    Radl, S. V., Roth, M., Hirschmann, B., Grießer, T. & Kern, W., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1 2 3 4 5 6 7 8 9 Next
View graph of relations

Latest Research Output

View more (413)