Wilfried Eichlseder

151 - 200 out of 287Page size: 50

Research output

  1. 2008
  2. Published

    A novel test methodology for optimizing metallic journal bearing materials

    Grün, F., Godor, I., Gärtner, W. & Eichlseder, W., 2008, Nordtrib 2008; 13th Nordic Symposium on Tribology. p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Assessment of lifetime calculation of forged IN718 aerospace components based on a mulit-parametric microstructural evaluation

    Stoschka, M., Stockinger, M., Leitner, H., Riedler, M. & Eichlseder, W., 2008, SUPERALLOYS 2008. p. 573-582

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  4. Published

    Comparison of the Teperature and Pre-Aging Influences on the Low Cycle Fatigue and Thermo-Mechanical Fatigue Behaviour of Copper Alloys (CuCoBe/CuCo2Be)

    Köberl, H., Winter, G., Leitner, H. & Eichlseder, W., 2008, In: Journal of ASTM international. Vol.5, p. 1-12

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Computed Tomography- an Alternative and Complement to Traditional Metallographic Investigations of Porosity in Cast Aluminium

    Powazka, D., Brune, M., Eichlseder, W., Leitner, H. & Oppermann, H., 2008, Computed Tomography- an Alternative and Complement to Traditional Metallographic Investigations of Porosity in Cast Aluminium. p. 51-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Computed Tomography for the Evaluation of the Influence of Porosity on Stress Distribution

    Powazka, D., Brune, M., Eichlseder, W., Leitner, H. & Oppermann, H., 2008, In: Archives of Foundry Engineering (AFE ; quarterly). 8, Special issue 1, p. 291-294

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Das Kitagwa-Haigh Diagramm für die Berechnung der Lebensdauer von Aluminiumdruckgussteilen

    Oberwinkler, C., Leitner, H. & Eichlseder, W., 2008, Das Kitagwa-Haigh Diagramm für die Berechnung der Lebensdauer von Aluminiumdruckgussteilen. p. 257-262

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Designing Test Methods and Deriving the Events Taking Place in Differently Designed Tribomaterials

    Grün, F., Godor, I. & Eichlseder, W., 2008, Lubricants, Materials and Lubrication Engineering. p. 76-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Design of a test rig for multialial fatigue properties

    Gräf, M., Fröschl, J. & Eichlseder, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. Published

    Design of a test rig for multialial fatigue properties

    Gräf, M., Fröschl, J. & Eichlseder, W., 2008, Design of a test rig for multialial fatigue properties. p. 81-82

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Development of a strategy for evaluation of mean stress influences for an integral strength hypothesis

    Gerstmayr, G., Fröschl, J. & Eichlseder, W., 2008, 2nd Fatigue Symposium Leoben. p. 357-364

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Engineering estimates in the region of high-cycle fatigue for the fatigue and crack growth behaviour of aluminium alloys

    Leitgeb, A., Jan, M., Gänser, H.-P. & Eichlseder, W., 2008, Engineering estimates in the region of high-cycle fatigue for the fatigue and crack growth behaviour of aluminium alloys. p. 380-388

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Engineering estimates in the region of high-cycle fatigue for the fatigue and crack growth behaviour of aluminium alloys

    Leitgeb, A., Jan, M., Gänser, H.-P. & Eichlseder, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    Expertise of thermomechanical fatigue at the institute of mechanical engineering

    Winter, G., Köberl, H. & Eichlseder, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Fatigue Life Behaviour of a Gear Tooth Root Taking Loading, Manufacturing, Surface Layer and Material into Account

    Haberer, C., Leitner, H., Fröschl, J. & Eichlseder, W., 2008, RELMAS 2008. p. 138-142

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Fertigungsbedingte Einflüsse auf die Schwingfestigkeit von Al-Gussbauteilen – Neue Erkenntnisse für Druckgussbauteile

    Powazka, D., Brune, M., Oppermann, H., Eichlseder, W. & Leitner, H., 2008, In: Gießerei-Rundschau. 55, p. 92-99

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Fiber orientation and fatigue behavior of a short glass-fiber reinforced partial aromatic polyamide

    Guster, C., Pinter, G., Balika, W., Eichlseder, W. & Lang, R., 2008, 2. Fatigue Symposium Leoben. p. 444-455

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Fiber orientation and fatigue behaviour of a short glass-fiber reinforced partial aromatic polyamide

    Guster, C., Pinter, G., Balika, W., Eichlseder, W. & Lang, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    Influences of the microstructure on the fatigue behaviour of Ti-6AL-4V-Alloy

    Tan, W., Stoschka, M., Eichlseder, W. & Riedler, M., 2008, Influences of the microstructure on the fatigue behaviour of Ti-6AL-4V-Alloy. p. 257-258

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Influences of the microstructure on the fatigue behaviour of Ti-6AL-4V-Alloy

    Tan, W., Stoschka, M., Eichlseder, W. & Riedler, M., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  21. Published

    Jahresbericht 2007 - CD Labor

    Eichlseder, W., Grün, F., Köberl, H., Stoschka, M., Winter, G. & Fröschl, J., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Material and fatigue life models for thermomechanical loaded components

    Eichlseder, W., Winter, G. & Köberl, H., 2008, In: Materialwissenschaft und Werkstofftechnik. 39, p. 777-782

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Methoden zur Ermittlung der TMF-Lebensdauer von GJV450

    Winter, G., Köberl, H. & Eichlseder, W., 2008, In: Gießerei-Rundschau. 55, p. 238-241

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Optimizing the Load Carrying Capacity of a Gear Tooth Root

    Haberer, C., Leitner, H., Fröschl, J. & Eichlseder, W., 2008, 2nd Fatigue Symposium Leoben. p. 221-230

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Optimizing the Load Carrying Capacity of a Gear Tooth Root

    Haberer, C., Leitner, H., Fröschl, J. & Eichlseder, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    Synthesis of conventional and damage tolerant design concepts

    Jan, M., Gänser, H.-P., Leitgeb, A. & Eichlseder, W., 2008, Synthesis of conventional and damage tolerant design concepts. p. 411-430

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Tätigkeitsbericht CD-Labor

    Eichlseder, W., Fröschl, J., Grün, F., Stoschka, M., Leitgeb, A., Köberl, H. & Winter, G., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    Test methods to visualize the break-down behaviour of sliding bearing materials

    Grün, F., Godor, I., Eichlseder, W. & Gaertner, W., 2008, 2007 Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2007. Vol. PART A. p. 413-414 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    The effect of machining on the surface integrity and fatigue life

    Javidi, A., Rieger, U. & Eichlseder, W., 2008, In: International Journal of Fatigue. 30, p. 2050-2055

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    The influence of thermomechanical fatigue on Nickel coatings

    Köberl, H., Winter, G., Leitner, H. & Eichlseder, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    The influence of thermomechanical fatigue on Nickel coatings

    Köberl, H., Winter, G., Leitner, H. & Eichlseder, W., 2008, Sixt international conference on low cycle fatigue. p. 149-154

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    The influence of welding process parameters on residual stresses by means of coupled thermo-mechanical

    Stoschka, M., Fössl, T., Leitner, H. & Eichlseder, W., 2008, The influence of welding process parameters on residual stresses by means of coupled thermo-mechanical. p. 701-708

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    THERMO-MECHANICAL SIMULATION PARAMETERS OF COMPLEX WELDED STRUCTURES

    Fössl, T., Stoschka, M. & Eichlseder, W., 2008, THERMO-MECHANICAL SIMULATION PARAMETERS OF COMPLEX WELDED STRUCTURES. p. 67-68

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    TMF investigations on Copper and Nickel alloys

    Köberl, H., Winter, G. & Eichlseder, W., 2008, 2nd fatigue Symposium Leoben. p. 139-148

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    TMF investigations on specimens of SiMo alloyed cast iron are compared to a breakdown of an exhaust manifold

    Winter, G., Köberl, H., Tan, W. & Eichlseder, W., 2008, Sixth International Conference on Low Cycle Fatigue. p. 177-183

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Tribologische Funktionsweise von metallischen Gleitwerkstoffen im Motorenbau

    Grün, F., Godor, I. & Eichlseder, W., 2008, Tagungsunterlagen - Forum für Metallurgie und Werkstofftechnik. p. 22-23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Tribosystem journal bearing: what are the benefits of damage equivalent model tests?

    Grün, F., Godor, I. & Eichlseder, W., 2008, 2nd Fatigue Symposium Leoben. p. 468-487

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. 2007
  39. Published

    VERFAHREN UND VORRICHTUNG ZUR PRÜFUNG EINES PROBEKÖRPERS UNTER KOMBINIERTER UMLAUFBIEGE- UND TORSIONSBEANSPRUCHUNG

    Froeschl, J. (Inventor) & Eichlseder, W. (Inventor), 19 Apr 2007, IPC No. G01N 3/ 32 A I, Patent No. WO2007042275, Priority date 14 Oct 2005, Priority No. AT20050001685

    Research output: Patent

  40. Published

    VERFAHREN ZUR ÜBERPRÜFUNG EINES PROBEKÖRPERS UNTER KOMBINIERTER UMLAUFBIEGE- UND TORSIONSBEANSPRUCHUNG UND VORRICHTUNG HIERZU

    Eichlseder, W. (Inventor), 15 Apr 2007, Patent No. AT502559, Priority date 14 Oct 2005, Priority No. AT20050001685

    Research output: Patent

  41. Published

    CD-Laboratory: Evaluation Report 2007

    Eichlseder, W., Fröschl, J., Grün, F., Leitgeb, A., Stoschka, M. & Winter, G., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Characterisation of the fatigue behavior of short glass fiber reinforced polymers

    Guster, C., Pinter, G., Major, Z., Eichlseder, W. & Lang, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Characterisation of the fatigue behavior of short glass fiber reinforced polymers

    Guster, C., Pinter, G., Major, Z., Eichlseder, W. & Lang, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Characterisation of the fatigue behavior of short glass fiber reinforced polymers

    Guster, C., Pinter, G., Major, Z., Eichlseder, W. & Lang, R., 2007, Polymeric Materials in Automotove PMA. p. 47-49

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Development of a Multiaxial Fatigue Strength Criterion Accounting for Anisotropic Effects

    Gerstmayr, G., Fröschl, J. & Eichlseder, W., 2007, Development of a Multiaxial Fatigue Strength Criterion Accounting for Anisotropic Effects. p. 221-222

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Ermittlung von Umlaufbiegefestigkeiten von gekerbten Proben zur Entwicklung neuer Werkstoff-Plasmanitrier-Kombinationen am Beispiel von Hochleistungszahnrädern

    Reithofer, G., Leitner, H., Eichlseder, W. & Schuch, F., 2007, In: HTM - journal of heat treatment and materials . 03, p. 134-138

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Failure Mechanism of Pure Nickel (Ni 200/201) under thermo-Mechanical Loading

    Köberl, H., Winter, G., Riedler, M. & Eichlseder, W., 2007, Advances in Fracture and Damage Mechanics VI. p. 793-796

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Failure Mechanism of Pure Nickel (Ni 200/201) under thermo-Mechanical Loading

    Köberl, H., Winter, G., Riedler, M. & Eichlseder, W., 2007, Key engineering materials. Vol. 348-349. p. 793-769 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  49. Published

    Fatigue analysis of forged aerospace components based on micro structural parameters

    Riedler, M., Stockinger, M., Stoschka, M. & Eichlseder, W., 2007, Key engineering materials. Vol. 348-349. p. 185-188 4 p. (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  50. Published

    Fatigue Analysis of Forged Aerospace Components based on Micro Structural Paramters

    Riedler, M., Stockinger, M., Stoschka, M. & Eichlseder, W., 2007, Key engineering materials. p. 348-349 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  51. Published

    Influence of forging process parameters on fatigue life, exemplified for inconel 718

    Stoschka, M., Riedler, M. & Eichlseder, W., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  52. Published

    Kurzglasfaserverstärkte Kunststoffe - Charakterisierung der Werkstoffanisotropie und Untersuchung deren Einfluss auf das Schwingfestigkeitsverhalten

    Guster, C., Eichlseder, W., Pinter, G. & Lang, R., 2007, In: VLK-News. p. 13-18

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 Next
View graph of relations

Contact

Phone: 1400

Latest Research Output

View more (287)