Thomas Lucyshyn

1 - 50 out of 129Page size: 50

Research output

  1. 2024
  2. Published

    Rheological Characterisation of Powder Injection Moulding Feedstocks

    Duretek, I., Lucyshyn, T. & Holzer, C., 25 Oct 2024.

    Research output: Contribution to conference › Abstract

  3. Published

    Effect of Epoxy Chain Extender and Multiple Processing on Poly-(R)-3-Hydroxybutyrate’s Properties

    Hinterberger, K., Main, P., Waly, C. & Lucyshyn, T., 4 Oct 2024, In: Journal of polymers and the environment. 33.2025, January, p. 112-124 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Optimization Strategy for Process Design in Rubber Injection Molding: A Simulation-Based Approach Allowing for the Prediction of Mechanical Properties of Vulcanizates

    Traintinger, M., Azevedo, M., Kerschbaumer, R. C., Lechner, B. & Lucyshyn, T., 17 Jul 2024, In: Polymers. 16.2024, 14, 20 p., 2033.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Effect of mechanical recycling on short glass fibre reinforced polyamide 6,6 from post-industrial waste

    Salvi, A., Lucyshyn, T., Marano, C., Ostrowska, M., Vangosa, F. B., Dotelli, G. & Holzer, C., 8 May 2024, In: AIP Conference Proceedings. 3158, 1, 120005.

    Research output: Contribution to journal › Conference article › peer-review

  6. Published

    Investigation on strategies for optimizing process definition in rubber processing: A study on mechanical and chemical properties of vulcanizates as basis for the development of a new calculation model for quality prediction

    Traintinger, M., Kerschbaumer, R. C., Hornbachner, M., Lechner, B. & Lucyshyn, T., 10 Feb 2024, In: Journal of applied polymer science. 141.2024, 6, 18 p., e54901.

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2023
  8. Published

    Investigating the Aging Behavior of High-Density Polyethylene and Polyketone in a Liquid Organic Hydrogen Carrier

    Surisetty, J. S. S., Sharifian, M., Lucyshyn, T. & Holzer, C., 15 Nov 2023, In: Polymers. 15.2023, 22, 14 p., 4410.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Impact of Multiple Reprocessing on Properties of Polyhydroxybutyrate and Polypropylene

    Main, P., Petersmann, S., Wild, N., Feuchter, M., Duretek, I., Edeleva, M., Ragaert, P., Cardon, L. & Lucyshyn, T., 18 Oct 2023, In: Polymers. 15.2023, 20, 24 p., 4126.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Material characterisation of industrial textile waste under consideration of various processing conditions

    Jenull, U., Duretek, I., Lucyshyn, T. & Holzer, C., 9 Oct 2023, Proceedings SARDINIA 2023. p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Influence of Melt Strength Enhancers on PHB Processing

    Main, P., Lucyshyn, T., Van de Ginste, L. & Cardon, L., 13 Sept 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    Effect of LOHC on HDPE and POK under different temperature conditions

    Surisetty, J. S. S., Lucyshyn, T. (Editor) & Holzer, C., 7 Sept 2023.

    Research output: Contribution to conference › Poster › Research

  13. Published

    Influence of processing conditions of industrial textile waste on rheological and thermal material properties

    Jenull, U., Holzer, C. & Lucyshyn, T., 7 Sept 2023, 31st Leoben-Conference on Polymer Engineering and Science: Circular Thinking in Polymer Technology. Leoben, Vol. Volume 12. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. 2022
  15. Published

    Process Optimization of Injection Overmolding Structural Electronics with Regard to Film Distortion

    Hubmann, M., Madadnia, B., Groten, J., Pletz, M., Vanfleteren, J., Stadlober, B., Bossuyt, F., Kaur, J. & Lucyshyn, T., 22 Nov 2022, In: Polymers. 14.2022, 23, 20 p., 5060.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Influence of Viscose Fibre Geometry on the Structure–Property Relationships of High-Density Polyethylene Composites

    Slapnik, J., Kraft, G., Wilhelm, T., Hribernik, M., Švab, I., Lucyshyn, T. & Pinter, G. G., 18 Oct 2022, In: Polymers. 14.2022, 20, 15 p., 4389.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Low-Temperature Fibre Direct Compounding of Cellulose Fibres into PA6

    Slapnik, J., Liu, Y., Kupfer, R., Lucyshyn, T., Nardin, B. & Pinter, G., 23 Sept 2022, In: Materials. 15.2022, 19, 14 p., 6600.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Injection Molding Simulation of Polyoxymethylene Using Crystallization Kinetics Data and Comparison with the Experimental Process

    Schrank, T., Berer, M., Haar, B., Ramoa, B., Lucyshyn, T., Feuchter, M., Pinter, G., Speranza, V. & Pantani, R., 23 Mar 2022, In: Polymer crystallization. 2022, 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. 2021
  20. Published

    Relationships between the Decomposition Behaviour of Renewable Fibres and Their Reinforcing Effect in Composites Processed at High Temperatures

    Slapnik, J., Lucyshyn, T. & Pinter, G., 18 Dec 2021, In: Polymers. 13.2021, 24, 16 p., 4448.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Biobased Plastics for a Circular Economy

    Main, P. & Lucyshyn, T., 30 Nov 2021.

    Research output: Contribution to conference › Poster › Research

  22. Published

    Influence of the Mold Material on the Injection Molding Cycle Time and Warpage Depending on the Polymer Processed

    Lucyshyn, T., Enffans D’Avernas, L. V. D. & Holzer, C., 21 Sept 2021, In: Polymers. 13.2021, 18, 16 p., 3196.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Why is mechanical recycling of bioplastics important for a circular economy?

    Main, P. & Lucyshyn, T., 15 Sept 2021.

    Research output: Contribution to conference › Poster › Research

  24. Published

    The Relationship between a Defined Microstructure within the Mold Surface and the Corresponding Roughness on the Part: A Systematic Study on Particle Size, Filler-, and Compatibilizer Content

    Kerschbaumer, R. C., Bolka, S., Pesl, T., Duretek, I. & Lucyshyn, T., 17 Aug 2021, In: Polymers. 13.2021, 16, 23 p., 2757.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Temperature Profile in Rubber Injection Molding: Application of a Recently Developed Testing Method to Improve the Process Simulation and Calculation of Curing Kinetics

    Traintinger, M., Roman Christopher, K., Lechner, B., Friesenbichler, W. & Lucyshyn, T., 26 Jan 2021, In: Polymers. 13.2021, 3, p. 1-12 12 p., 380.

    Research output: Contribution to journal › Article › Research › peer-review

  26. 2019
  27. Published

    Physical Foaming and Crosslinking of Polyethylene with Modified Talcum

    Kaltenegger-Uray, A., Rieß, G., Lucyshyn, T., Holzer, C. & Kern, W., 9 Sept 2019, In: Polymers. 11.2019, 9, 15 p., 1472.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Modified talcum as crosslinking agent for polyolefins

    Kaltenegger-Uray, A., Rieß, G., Lucyshyn, T., Holzer, C. & Kern, W., 26 Aug 2019, In: AIP Conference Proceedings. 2019, 2139, p. 1-5 5 p., 160001.

    Research output: Contribution to journal › Conference article › peer-review

  29. Published

    Thermally conductive high‐density polyethylene as novel phase‐change material: Application‐relevant long‐term stability

    Weingrill, H., Resch-Fauster, K., Lucyshyn, T. & Zauner, C., 12 Jul 2019, In: Journal of Applied Polymer Science. 137.2020, 2, 10 p., 48269.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Aktuelle Entwicklungen in der Simulation des Pulverspritzgießprozesses

    Lucyshyn, T., Hubmann, M., Duretek, I. & Holzer, C., 25 Apr 2019, Simulation in der Kunststofftechnik. Schuecker, C. (ed.). Leoben, Vol. Band 9. p. 101-103 3 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    High-density polyethylene as phase-change material: Long-term stability and aging

    Weingrill, H., Resch-Fauster, K., Lucyshyn, T. & Zauner, C., 10 Apr 2019, In: Polymer Testing. 76.2019, July, p. 433-442 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Crosslinked polyolefins using a modified filler

    Kaltenegger-Uray, A., Rieß, G., Lucyshyn, T., Holzer, C. & Kern, W., 6 Feb 2019, In: AIP Conference Proceedings. 2019, 2065, 5 p., 030051.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    High-Density Polyethylene as Phase-Change Material: Long-Term Stability

    Weingrill, H., Resch-Fauster, K., Lucyshyn, T. & Zauner, C., 2019.

    Research output: Contribution to conference › Poster › Research

  34. 2018
  35. Published

    Optimization of fiber prediction model coefficients in injection molding simulation based on micro computed tomography

    Morak, M., Tscharnuter, D., Lucyshyn, T., Hahn, W., Göttlinger, M., Kummer, M., Steinberger, R. & Gross, T., 5 Dec 2018, In: Polymer engineering and science. 59.2019, s2, p. E152-E160 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Influence of filler treatment on the behavior of blast furnace slag filled polypropylene compounds

    Mostafa, A., Lucyshyn, T., Holzer, C., Flachberger, H., Öfner, W., Rieß, G. & Fritz, B., 23 Apr 2018, In: Journal of Applied Polymer Science. 135.2018, 31, p. 1-9 9 p., 46535.

    Research output: Contribution to journal › Article › Research › peer-review

  37. 2017
  38. Published

    Neues Werkzeug für die Messung der Entformungskräfte

    Lucyshyn, T. & Holzer, C., 1 Nov 2017, In: GAK : Gummi, Fasern, Kunststoffe. 11/2017, Jahrgang 70, p. 704-708 5 p.

    Research output: Contribution to journal › Article › Research

  39. E-pub ahead of print

    Influence of Melt Compounding on Blast Furnace Slag Filled PP Compounds: A Comparative Study

    Mostafa, A., Pacher, G., Lucyshyn, T., Holzer, C., Krischey, E., Flachberger, H., Fritz, B. & Laske, S., 31 Jul 2017, (E-pub ahead of print) In: International polymer processing. 32.2017, 4, p. 446-454 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Filling behaviour of wood plastic composites

    Duretek, I., Lucyshyn, T. & Holzer, C., 16 Feb 2017, In: Journal of Physics: Conference Series. 790, 1, 012006.

    Research output: Contribution to journal › Conference article › peer-review

  41. Published

    Influence of compounding technology on rheological, thermal and mechanical behavior of blast furnace slag filled polystyrene compounds

    Mostafa, A., Pacher, G. A., Lucyshyn, T., Holzer, C., Flachberger, H., Krischey, E., Fritz, B. & Laske, S., 2017, In: AIP Conference Proceedings. 1914.2017, 1, 6 p., 150003.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Spezielle Aspekte der Spritzgießsimulation

    Lucyshyn, T., Messiha, M. & Holzer, C., 2017, Schriftenreihe Kunststofftechnik Leoben: 26. Leobener Kunststoff-Kolloquium. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 07. p. 67-76 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. 2016
  44. Published

    Characterization and Prediction of Fiber Orientation in Short Fiber Reinforced Thermoplastics

    Morak, M., Tscharnuter, D., Lucyshyn, T., Gross, T., Steinberger, R., Göttlinger, M. & Hahn, W., 16 Nov 2016.

    Research output: Contribution to conference › Presentation › Research

  45. Published

    Analysis of factors affecting the demolding of micro-structured devices in the injection molding process

    Strohmayer, B., Struklec, T., Lucyshyn, T. & Holzer, C., Oct 2016. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  46. Published

    Filling behavior of micro-ribs on injection molded parts depending on micro-structure orientation and processing parameters

    Lucyshyn, T., Burgsteiner, M., Graninger, G. & Holzer, C., Oct 2016, AIP Conference Proceedings: Proceedings of the Regional Conference Graz 2015 - Polymer Processing Society PPS. Vol. 1779. 5 p. 020009

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Influence of mold steel on injection molding process: Experimental and numerical studies

    Lucyshyn, T., 23 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  48. Published

    Injection Molds - The Key to Quality Products

    Holzer, C. & Lucyshyn, T., 23 Sept 2016.

    Research output: Contribution to conference › Abstract

  49. Published

    Effect of Compounding Method on Rheological, Thermal and Mechanical Behavior of Blast Furnace Slag Filled Polystyrene Compounds

    Mostafa, H., Pacher, G., Lucyshyn, T., Holzer, C., Flachberger, H., Krischey, E., Fritz, B. & Laske, S., 27 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  50. Published

    Simulation of the Influence of Thermal Properties of the Mould Steel on the Injection Moulding Process

    Holzer, C., Lucyshyn, T. & Des Enffans D'Avernas, L.-V., 27 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  51. Published

    Durchgängige Simulationskette von der Konstruktion bis zur Spannungsbewertung

    Mösenbacher, A., Lucyshyn, T., Pußwald, S. & Primetzhofer, A., 15 Mar 2016, p. 1. 28 p.

    Research output: Contribution to conference › Presentation › Research

  52. Published

    Kunststoffe - Fluch oder Segen?

    Lucyshyn, T., 3 Mar 2016.

    Research output: Contribution to conference › Presentation › Research

  53. Published

    Die Faserorientierung auf dem Prüfstand – Hinterfragung der Erwartungshaltung in der Lebensdauerabschätzung

    Mösenbacher, A., Müller, F., Primetzhofer, A. & Lucyshyn, T., 26 Feb 2016. 16 p.

    Research output: Contribution to conference › Presentation › Research

  54. Published

    Simulation des Einflusses der thermischen Eigenschaften des Werkzeugstahls auf den Spritzgießprozess

    Lucyshyn, T., 26 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  55. Published

    Filling Behavior of Wood Plastic Composites

    Duretek, I., Lucyshyn, T. & Holzer, C., 2016, In: Journal of Civil Engineering and Architecture. 10, p. 1236-1243 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Non-Contact Measurement of Circular Surfaces via Photometric Stereo in Polar Coordinates

    Radler, B., Harker, M., O'Leary, P. & Lucyshyn, T., 2016

    Research output: Other contribution › Research

  57. 2015
  58. Published

    Filling behaviour of wood plastic composites

    Duretek, I., Lucyshyn, T. & Holzer, C., 7 Oct 2015, p. 47. 1 p.

    Research output: Contribution to conference › Abstract

  59. Published

    Measurement of interdiffusion in polymeric materials by applying Raman spectroscopy

    Bruckmoser, K., Resch, K., Kisslinger, T. & Lucyshyn, T., Sept 2015, In: Polymer Testing. 46, p. 122-133 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 Next
View graph of relations

Contact

Phone: 3510

Latest Research Output

View more (129)