Thomas Griesser

141 - 160 out of 290Page size: 20

Research output

  1. 2016
  2. Published

    Photopolymerisierbare Monomere für den 3D Druck von biokompatiblen Strukturen

    Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Mostegel, F., Edler, M., Pinter, G. & Grießer, T., Apr 2016, Schriftenreihe Kunststofftechnik Leoben: 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt. Vol. 6. p. 127-131

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Adsorption Studies of Organophosphonic Acids on Differently Activated Gold Surfaces

    Niegelhell, K., Leimgruber, S., Grießer, T., Brandl, C., Chernev, B., Schennach, R., Trimmel, G. & Spirk, S., 26 Jan 2016, In: Langmuir. 32.2016, 6, p. 1550-1559 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Reactive cellulose-based thin films-a concept for multifunctional polysaccharide surfaces

    Elschner, T., Reishofer, D., Kargl, R., Grießer, T., Heinze, T. & Kleinschek, K. S., 1 Jan 2016, In: RSC Advances. 6, 76, p. 72378-72385 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    A Novel UV Tunable and Patternable Polyaniline Derivate as a Charge Injection Layer in OLEDs

    Simone, R., Grießer, T., Edler, M., Kern, W., Rath, T., Trimmel, G., Pavitschitz, A., Teichert, C., Simbrunner, C., Schwabegger, G. & Sitter, H., 2016.

    Research output: Contribution to conference › Poster › Research

  6. Published

    Data on synthesis and thermo-mechanical properties of stimuli-responsive rubber materials bearing pendant anthracene groups

    Manhart, J. C., Ayalur Karunakaran, S., Radl, S., Oesterreicher, A., Moser, A., Ganser, C., Teichert, C., Pinter, G. G., Kern, W., Grießer, T. & Schlögl, S., 2016, In: Data in Brief. 2016, 9, p. 524-529

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Data on synthesis and thermo-mechanical properties of stimuli-responsive rubber materials of pendant anthracene groups

    Manhart, J., Ayalur-Karunakaran, S., Radl, S. V., Oesterreicher, A., Moser, A., Ganser, C., Teichert, C., Pinter, G., Kern, W., Grießer, T. & Schlögl, S., 2016, In: Data in Brief. 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Design and application of photo-reversible elastomer networks by using the [4πs+4πs] cycloaddition reaction of pendant anthracene groups

    Manhart, J., Ayalur-Karunakaran, S., Oesterreicher, A., Radl, S. V., Moser, A., Ganser, C., Teichert, C., Pinter, G., Kern, W., Grießer, T. & Schlögl, S., 2016, In: Polymer. 102.2016, October, p. 10-20 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Exploring Network Formation of Tough and Biocompatible Thiol-yne Based Photopolymers

    Oesterreicher, A., Gorsche, C., Ayalur-Karunakaran, S., Moser, A., Edler, M., Pinter, G., Schlögl, S., Liska, R. & Grießer, T., 2016, In: Macromolecular rapid communications. 37

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Exploring thiol-yne based monomers as low cytotoxic building blocks for radical photopolymerization

    Oesterreicher, A., Ayalur-Karunakaran, S., Moser, A., Mostegel, F., Edler, M., Kaschnitz, P., Pinter, G., Trimmel, G., Schlögl, S. & Grießer, T., 2016, In: Journal of polymer science : A, Polymer chemistry. 54, p. 3484-3494

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Exploring thiol-yne based monomers as low cytotoxic building blocks for radical photopolymerization;

    Oesterreicher, A.; Ayalur-Karunakaran, S.; Moser, A.; Mostegel, F.H.; Edler, M.; Kaschnitz, P.; Pinter, G.; Trimmel, G.; Schlögl, S.; Griesser, T., 2016, In: Journal of polymer science : A, Polymer chemistry. 54, , 21, p. 3484-3494.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Lignocellulose Nanofiber-Reinforced Polystyrene Produced from Composite Microspheres Obtained in Suspension Polymerization Shows Superior Mechanical Performance

    Ballner, D., Herzele, S., Keckes, J., Edler, M., Griesser, T., Saake, B., Liebner, F., Potthast, A., Paulik, C. & Gindl-Altmutter, W., 2016, In: ACS Applied Materials & Interfaces. 8, 21, p. 13520-13525 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Low migration type I photoinitiators for biocompatible thiol-ene formulations

    Oesterreicher, A., Roth, M., Hennen, D., Mostegel, F., Edler, M., Kappaun, S. & Grießer, T., 2016, In: European polymer journal. 88, 3, p. 393 - 402 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Microfibrillated Lignocellulose Enables the Suspension-Polymerisation of Unsaturated Polyester Resin for Novel Composite Applications

    Yutao Yan 1, Sabine Herzele 2, Arunjunai Raj Mahendran 2, Matthias Edler 3, Thomas Griesser 3, Bodo Saake 4, Jianzhang Li 1,* and Wolfgang Gindl-Altmutter 5,*, 2016, In: Polymers. 8, 255

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Photoreversible Crosslinking of Elastomeric Materials Comprising Spatially Resolved Switchable Characteristics

    Kaiser, S., Manhart, J. C., Ayalur Karunakaran, S., Moser, A., Oesterreicher, A., Pinter, G. G., Teichert, C., Grießer, T., Kern, W. & Schlögl, S., 2016.

    Research output: Contribution to conference › Poster › Research

  16. Published

    Thiol-Yne Derived Photopolymers from Low-Cytotoxic 3D-Printing Resins

    Hartmann, D., Oesterreicher, A., Edler, M., Moser, A., Pinter, G. & Grießer, T., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  17. Published

    Tough and degradable photopolymers derived from alkyne monomers for 3D printing of biomedical materials

    Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Gmeiner , R., Edler, M., Pinter, G. & Grießer, T., 2016, In: Polymer Chemistry. 7, p. 5169-5180

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Vinylcarbonates as low-toxic monomers for digital ink-jet inks: Promising alternatives to acrylate based systems

    Mostegel, F., Roth, M., Gassner, M., Oesterreicher, A., Piock, R., Edler, M. & Grießer, T., 2016, In: Progress in organic coatings.

    Research output: Contribution to journal › Article › Research › peer-review

  19. 2015
  20. Published

    From Photosensitive Polymers for Advanced Applications to High-performance Photopolymers

    Grießer, T., 10 Dec 2015.

    Research output: Contribution to conference › Presentation › Research

  21. Published

    New strategies towards reversible and mendable epoxy based materials employing [4πs + 4πs] photocycloaddition and thermal cycloreversion of pendant anthracene groups

    Radl, S.a, Kreimer, M.a, Griesser, T.bc, Oesterreicher, A.c, Moser, A.d, Kern, W.ab, Schlögl, S.a, 2 Dec 2015, In: Polymer. Volume 80, p. Pages 76-87

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Multidimensionally photopatterned substrates on the basis of monosaccharide derivatives, their oligomers and their polymers and a method of production thereof

    Stana, K. K. (Inventor), Spirk, S. (Inventor), Griesser, T. (Inventor), Kern, W. (Inventor), Kargl, R. (Inventor) & Ribitsch, V. (Inventor), 30 Nov 2015, IPC No. G03F 7/ 00 C I, Patent No. SI2784586 (T1), 30 Nov 2015, Priority date 27 Mar 2013, Priority No. EP20130002404

    Research output: Patent

Previous 1...4 5 6 7 8 9 10 11 ...15 Next
View graph of relations

Contact

Phone: 2358

Latest Research Output

View more (290)