Thomas Antretter

151 - 200 out of 236Page size: 50

Research output

  1. 2012
  2. Published

    A mean-field model for transformation induced plasticity including backstress effects for non-proportional loadings

    Fischlschweiger, M., Cailletaud, G. & Antretter, T., 2012, In: International journal of plasticity. p. 53-71

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Caloric Effects in Ferroic Materials: New Concepts for Cooling: Projektantrag; Theoretical, Experimental, Basic - Fundamental (Grundlagenforschung)

    Antretter, T. (Reviewer), 2012, 180 p. Dresden

    Research output: Other contribution › Transfer › peer-review

  4. Published

    Convergence tests - Influence of modelling on the dynamic vibration behaviour of coaches

    Böhler, E., Antretter, T., Magerl, F. & Rosenberger, M., 2012, Generation and Propagation of Sound in Solids and Fluids - Modern Analysis Methods in Acoustics. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Crystal orientation changes: a comparison of crystal plasticity finite element study and experimental results

    Rehrl, C., Völker, B., Kleber, S., Antretter, T. & Pippan, R., 2012, In: Acta materialia. p. 2379-2386

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    CRYSTAL PLASTICITY AND THE MAXIMUM RATE OF DISSIPATION

    Gänser, H.-P., Antretter, T., Ecker, W. & Orthaber, M., 2012, Book of Abstracts of 10th World Congress on Computational Mechanics. p. 100-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Crystal Plasticity using the Principle of Maximum Dissipation

    Orthaber, M., Antretter, T. & Ecker, W., 2012, Book of Abstracts of ESMC-2012 - 8th European Solid Mechanics Conference. p. ---

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Damage of basalt induced by microwave irradiation

    Hartlieb, P., Leindl, M., Kuchar, F., Antretter, T. & Moser, P., 2012, In: Minerals engineering. p. 82-89

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Development of Techniques for Rock Cutting Applications

    Mikl, M., Antretter, T. & Pittino, G., 2012, European Mechanics Society, Book of Abstracts: ESMC-2012 - 8th European Solid Mechanics Conference, Graz, Austria, July 9-13, 2012. Holzapfel, G. A. & Ogden, R. W. (eds.). Graz

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Einfluss der zyklischen Verformung auf das Phasenumwandlungsverhalten in Heusler Legierungen für magnetokalorische Anwendungen: Auftraggeber: Deutsche Forschungsgesellschaft; Gutachten eines Projektantrags; Theoretical, Experimental, Basic - Fundamental (Grundlagenforschung)

    Antretter, T. (Reviewer), 2012, 20 p.

    Research output: Other contribution › Transfer › peer-review

  11. Published

    Experimental and numerical investigation of damage due to thermo mechanical fatigue of brake disks for railway applications

    Raninger, P., Ecker, W. & Antretter, T., 2012, Proceedings of 3rd Fatigue Symposium. p. 236-247

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Finite Element Modeling of the Cyclic Wetting Mechanism in the Active Part of Wheat Awns

    Zickler, G., Ruffoni, D., Dunlop, J. W. C., Elbaum, R., Weinkamer, R., Fratzl, P. & Antretter, T., 2012, In: Biointerphases. 7, p. 42-42

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Finite Element Modeling of the Humidity-driven Wetting Mechanism of Wheat Awns

    Zickler, G., Dunlop, J. W. C., Ruffoni, D., Elbaum, R., Weinkamer, R., Fratzl, P. & Antretter, T., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    Finite Element Modeling of the Humidity-driven Wetting Mechanism of Wheat Awns

    Zickler, G., Dunlop, J. W. C., Ruffoni, D., Elbaum, R., Weinkamer, R., Fratzl, P. & Antretter, T., 2012, Proceedings of the 8th European Solid Mechanics Conference. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Interaction of heat checks in aluminum pressure casting dies and their effect on fatigue life

    Raninger, P., Ecker, W., Antretter, T., Leindl, M. & Ebner, R., 2012, Key engineering materials. Vol. 488-489. p. 626-629 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  16. Published

    Macro-, Meso Scale Modeling of TRIP - Nonlinear Scale Transitions Rules

    Antretter, T., Fischlschweiger, M. & Cailletaud, G., 2012, Non-Linear Response of Conventional & Advanced Materials, and Multi-scale Modeling. p. 97-99

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  17. Published

    Nanostructured shape memory alloys

    Antretter, T., Fischer, F. D., Kompatscher, A. E., Müllner, P., Mangler, C., Peterlechner, M., Steiner, G. & Waitz, T., 2012, Structures and Systems.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Simulation der Lagerverluste in Großmotoren und deren Validierung

    Antretter, T. (Reviewer), 2012, Graz : Eigenverlag.

    Research output: Other contribution › Transfer › peer-review

  19. Published

    Simulation of the roller straightening process with respect to residual stresses and the curvature trend

    Kaiser, R., Hatzenbichler, T., Buchmayr, B. & Antretter, T., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Solution of a time-dependent heat conduction problem by an integral-equation approach

    Leindl, M., Oberaigner, E. & Antretter, T., 2012, In: Computational materials science. p. 178-181

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Thermo-Mechanical Behaviour of Dual-Phase Steels in Various Structural Morphologies: Experiments and Modelling

    Buchmayr, B. & Antretter, T., 2012, THERMEC 2011 : International Conference on Processing and Fabrication of Advanced Materials ; processing, fabrication, properties, applications ; August 1 - 5, 2011, Quebec City, Canada . p. 2072-2077 (Materials science forum; vol. 706-709).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Ultrafine -grained shape memory alloys

    Antretter, T., Fischer, F. D., Kompatscher, A. E., Müllner, P., Mangler, C., Peterlechner, M., Pranger, W., Steiner, G. & Waitz, T., 2012, TMS Annual.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. 2011
  24. Published

    The study of controlled cooling technology and warping of X65 heavy pipeline plate

    Zhang, D. F., Lu, J. S., Antretter, T., Lü, J. G. & Song, P., 1 Dec 2011, In: Beijing Gongye Daxue Xuebao/Journal of Beijing University of Technology. 37, 12, p. 1886-1891 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    A space-time concept for martensitic phase transformation based on statistical physics

    Oberaigner, E. R., Fischlschweiger, M. & Antretter, T., 4 May 2011, The 14th International ESAFORM Conference on Materials Forming: ESAFORM 2011. Menary, G. (ed.). AIP, American Inst. of Physics, Vol. 1353. p. 97-102 6 p. (AIP conference proceedings; vol. 1353).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    A mean field model for transformation induced plasticity including backstress effects

    Cailletaud, G., Fischlschweiger, M. & Antretter, T., 2011, Compact Paper International Symposium on Plasticity 2011. p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    A Meanfield Model for Transformation Induced Plasticity Including Backstress Effects

    Cailletaud, G., Fischlschweiger, M. & Antretter, T., 2011, Macro- to Nano-scale Inelastic Deformation and Failure of Materials & Multi-scale Modeling . p. 100-102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    A methodology to study crystal plasticity inside a compression test sample based on image correlation and EBSD

    Rehrl, C., Kleber, S., Antretter, T. & Pippan, R., 2011, In: Materials characterization. p. 793-800

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    A multi-block-spin approach for martensitic phase transformation based on statistical physics

    Fischlschweiger, M., Oberaigner, E., Antretter, T. & Cailletaud, G., 2011, Behavior and Mechanics of Multifunctional Materials and Composites 2011. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    A multi-block-spin-method based on statistical physics describing martensitic phase transformation

    Fischlschweiger, M., Oberaigner, E., Cailletaud, G. & Antretter, T., 2011, Technical Summaries SPIE Smart Structures/NDE 2011. p. 81-81

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    A phenomenological mean field model for coupling phase transformation with plasticity

    Fischlschweiger, M., Cailletaud, G., Antretter, T. & Oberaigner, E., 2011, Advances in heterogeneous material mechanics ICHMM3. p. 738-745

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Improved Multi-Particle Unit Cell Models for Studying Particle Reinforced Composites: Dissertation Azra Razool

    Antretter, T. (Reviewer), 2011, Wien

    Research output: Other contribution › Transfer › peer-review

  33. Published

    Martensitic Phase Transformations of Nanocrystalline NiTi Shape Memory Alloys Processed by Repeated Cold Rolling

    Peterlechner, M., Waitz, T., Gammer, C. & Antretter, T., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 102, p. 634-642

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Multifunctional Shape Memory Alloys processed by SPD

    Waitz, T., Mangler, C., Antretter, T., Fischer, F.-D., Pranger, W. & Müllner, P., 2011, Proceedings of International Symposium on Giant Straining Process for Advanced Materials (GSAM). p. 88-94

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Multifunctional Shape Memory Alloys Processed by SPD

    Waitz, T., Mangler, C., Steiner, G., Peterlechner, M., Antretter, T., Fischer, F. D. & Pranger, W., 2011, Proceedings of International Symposium on Giant Straining Process for Advanced Materials (GSAM). p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Neue Modellierungskonzepte für TRIP – Tranformation Induced Plasticity

    Antretter, T., Fischlschweiger, M. & Cailletaud, G., 2011, Tagungsband. p. 75-79

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Solution of a time-dependent heat conduction problem by an integral-equation approach

    Leindl, M., Oberaigner, E. & Antretter, T., 2011, In: Computational materials science. p. 178-181

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    The cyclic elasto-viscoplastic behavior of a high-speed steel under forging conditions - experiments and simulation

    Ishmurzin, A., Ecker, W., Krobath, M., Orthaber, M., Marsoner, S. & Antretter, T., 2011, In: Procedia Engineering. 10, p. 1991-1996

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    The cyclic elasto-viscoplastic behavior of a high-speed steel under forging conditions - experiments and simulations

    Ishmurzin, A., Ecker, W., Krobath, M., Orthaber, M., Marsoner, S. & Antretter, T., 2011, In: Procedia Engineering. 10, p. 1991-1996

    Research output: Contribution to journal › Article › Research › peer-review

  40. 2010
  41. Published

    An Integral-equation Approach to Solve Time-dependent Heat Conduction Problems

    Oberaigner, E., Leindl, M. & Antretter, T., 2010, International Congress of Mathematics, Abstracts, Short Communications, Posters. p. 723-724

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Experimental validation of microstructure evolution in crystalline materials

    Rehrl, C., Kleber, S., Antretter, T. & Pippan, R., 2010, In: Journal of physics / Conference series. p. 1-4

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Modelling and Simulation of Phase Transformation-Mechanics Coupling Using a Phase Field Method: Dissertation Kais Ammar

    Antretter, T. (Reviewer), 2010, Paris

    Research output: Other contribution › Transfer › peer-review

  44. Published

    Modelling Transformation Induced Plasticity – An Application to Heavy Steel Plates

    Antretter, T., Zhang, D. & Parteder, E., 2010, In: Steel research international. 81, p. 675-680

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Phänomenologische und mikroskopische Modellierung von Formgedächtnislegierungen: Dissertation Stefan Wilmanns

    Antretter, T. (Reviewer), 2010, Paderborn

    Research output: Other contribution › Transfer › peer-review

  46. Published

    Solution of a time-dependent thermoelastic problem by an integral-equation approach

    Leindl, M., Oberaigner, E. & Antretter, T., 2010, IWCMM20 - International Workshop on Computational Mechanics of Materials, Book of Abstracts. p. 50-50

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Study of nanometer-scaled lamellar microstructure in a Ti-45Al-7.5Nb alloy-Experiments and modeling

    Fischer, F. D., Waitz, T., Scheu, C., Cha, L., Dehm, G., Antretter, T. & Clemens, H., 2010, In: Intermetallics. 18, p. 509-517

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    The Correlation between Grain Size and Martensite Morphology in Nano-Structured NiTi Shape Memory Alloys

    Pranger, W., Antretter, T., Waitz, T. & Fischer, F. D., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    Time-Dependent Heat Conduction Problems Solved by an Integral-Equation Approach

    Oberaigner, E., Leindl, M. & Antretter, T., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. 2009
  51. Published

    Cold and Warm Forming of Polycrystals: The Effect of Crystal Plasticity

    Rehrl, C., Kleber, S., Antretter, T. & Pippan, R., 2009,

    Macro- to Nano-scale Inelastic Behavior of Materials: Plasticity, Fatigue, & Fracture

    .     p. 319-321

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Deformation, Stress State and Thermodynamic Force for a Growing Nano-Void in an Elastic-Plastic Material

    Fischer, F. D. & Antretter, T., 2009, In: International journal of plasticity. 25, p. 1819-1832

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Effect of Material Properties on the Thermo-Mechanical Loading and Damage of Pressure Casting Dies – A Numerical Study

    Ecker, W., Leindl, M., Antretter, T., Ebner, R., Siller, I. & Nisslé, S., 2009, Proceedings of the 8th International Tooling Conference. p. 927-939

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Formation of Martensite Twins in Nano-Structured Nickel Titanium Alloys

    Antretter, T., Waitz, T., Pranger, W. & Fischer, F. D., 2009,

    Macro- to Nano-scale Inelastic Behavior of Materials: Plasticity, Fatigue & Fracture

    .     p. 361-363

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 Next
View graph of relations

Contact

Phone: 4000

Latest Research Output

View more (236)