Tanja Lube

51 - 100 out of 161Page size: 50

Research output

  1. 2016
  2. Published

    Fracture toughness of Ceramic Discs and Plates

    Lube, T., Rasche, S. & Nindhia, T. G. T., 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  3. Published

    Recent Advances on Fast Fracture Strength of Zerodur® for Space Applications

    Béhar-Lafenêtre, S., Lube, T. & Ait-Zaid, S., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  4. Published

    Recent Andvances on Fast Fracture Strength of Zerodur® for Space Applications

    Béhar-Lafenêtre, S., Lube, T. & Ait-Zaid, S., 2016.

    Research output: Contribution to conference › Paper › peer-review

  5. 2015
  6. Published

    Vertraulicher Bericht: Endbericht (P048-F-02-03)

    Preis, W., Bucher, E., Sitte, W., Egger, A., Perz, M., Schrödl, N., Waldhäusl, J., Lube, T., Kusnezoff, M., Lawlor, V. & Werl, M., 3 Dec 2015

    Research output: Book/Report › Commissioned report › Research

  7. Published

    Vertraulicher Bericht: Publizierbarer Endbericht (P048-F-02-03)

    Preis, W., Bucher, E., Sitte, W., Egger, A., Perz, M., Schrödl, N., Waldhäusl, J., Lube, T., Kusnezoff, M., Lawlor, V. & Werl, M., 3 Dec 2015

    Research output: Book/Report › Commissioned report › Research

  8. Published

    The importance of mechanical testing for design with ceramics

    Lube, T., 7 Oct 2015.

    Research output: Contribution to conference › Paper › peer-review

  9. Published

    Determination of fracture toughness of small discs using the ball-on-three-balls test

    Lube, T., Rasche, S., Nindhia, T. G. T. & Strobl, S., 22 Jun 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  10. Published

    Bruchzähigkeitsmessung an keramischen Scheiben und Platten

    Lube, T., Rasche, S. & Nindhia, T. G. T., 9 Apr 2015.

    Research output: Contribution to conference › Poster › Research

  11. Published

    Macroscopic damage modeling for silicon nitride

    Ruck, J., Othmani, Y., Lube, T., Khader, I., Kailer, A. & Böhlke, T., 2015, In: Proceedings in applied mathematics and mechanics. 15, p. 147-148 2 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    On the Development of Experimental Methods for the Determination of Fracture Toughness Parameters of Ceramics

    Danzer, R., Lube, T. & Rasche, S., 2015, Recent Trends in Fracture and Damage Mechanics. Hütter, G. & Zybell, L. (eds.). Heidelberg: Springer, p. 197-214 18 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  13. Published

    Testing Methods on Ceramic Rolling Elements for Hybrid Bearings

    Schöppl, O. & Lube, T., 2015, In: Materials Performance and Characterization. 4, 1

    Research output: Contribution to journal › Article › Research › peer-review

  14. 2014
  15. Published

    Vertraulicher Zwischenbericht vom 25.4.2014 (P048-F-02-03)

    Preis, W., Bucher, E., Egger, A., Perz, M., Schrödl, N., Waldhäusl, J., Sitte, W., Lube, T., Lawlor, V., Janics, A., Hochenauer, C. & Kusnezoff, M., 25 Apr 2014

    Research output: Book/Report › Commissioned report › Transfer

  16. Published

    Apparent R-curve of Laminates with Strong Interfaces made from Al2O3 and Al2O3/ZrO2-Composites

    Lube, T., 2014, Encyclopedia of Thermal Stresses. p. 6643-6647

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  17. Published

    Ber-08-2014-RoLiCer: RoLiCer Deliverable 2.1: Tool for Calculation of Stress Intensity Factors

    Rasche, S. & Lube, T., 2014

    Research output: Book/Report › Commissioned report › Transfer

  18. Published

    Ber-28-2014-RoLiCer: RoLiCer Deliverable 8.4: Workshop “metal forming” September 2014

    Lube, T., 2014

    Research output: Book/Report › Commissioned report › Transfer

  19. Published

    Ber-34-2014-RoLiCer: RoLiCer Deliverable 6.3: Optimal surface finish for ceramic balls

    Lube, T., Harrer, W. & Vieillard, C., 2014

    Research output: Book/Report › Commissioned report › Transfer

  20. Published

    Ber-35-2014-ELTSECCS: Deliverable: 4.1 Materialparameter als Funktion unterschiedlicher Betriebsbedingungen

    Lube, T. & Harrer, W., 2014

    Research output: Book/Report › Commissioned report › Transfer

  21. Published

    Ber-57-2014-RoLiCer: RoLiCer Deliverable 5.6: Industrial Field test: Wire Rolling Analysis and documentation

    Harrer, W. & Lube, T., 2014

    Research output: Book/Report › Commissioned report › Transfer

  22. Published

    Ber-66-2014-RoLiCer: RoLiCer @ MUL: Periodic Report (Month 36)

    Lube, T. & Rasche, S., 2014

    Research output: Book/Report › Commissioned report › Transfer

  23. Published

    Determination of strength and fracture toughness of small ceramic discs using the small punch test and the ball-on-three-balls test

    Rasche, S., Strobl, S., Kuna, M., Bermejo Moratinos, R. & Lube, T., 2014, In: Procedia Materials Science. p. 961-966

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Ermüdungsbruch in Siliziumnitrid

    Lube, T., Khader, I., Kailer, A., Degenhardt, U. & Berroth, K., 2014, Fortschritte in der Metallographie. p. 353-357

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  25. Published

    Fracture toughness testing of small ceramic discs and plates

    Strobl, S., Rasche, S., Krautgasser, C., Sharova, E. & Lube, T., 2014, In: Journal of the European Ceramic Society. p. 1637-1642

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Mechanical Properties and Reliability of Advanced Ceramics

    Lube, T. & Danzer, R., 2014, Advanced Ceramics for Dentristry. p. 173-199

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  27. Published

    Mechanical properties of silicon nitride rolling elements in dependence of size and shape

    Strobl, S., Lube, T., Supancic, P., Stoiser, M., Schöppl, O. & Danzer, R., 2014, In: Journal of the European Ceramic Society. p. 4167-4176

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Toughness measurement on ball specimens. Part II: Experimental procedure and measurement uncertainties

    Strobl, S., Lube, T. & Schöppl, O., 2014, In: Journal of the European Ceramic Society. p. 1881-1892

    Research output: Contribution to journal › Article › Research › peer-review

  29. 2013
  30. Published

    Ber-08-2013-RoLiCer: RoLiCer @ MUL: MONTH 10 - 15

    Lube, T. & Rasche, S., 2013

    Research output: Book/Report › Commissioned report › Transfer

  31. Published

    Ber-09-2013-RoLiCer: RoLiCer Deliverabele 6.1: Fatigue under cyclic loading with R = -1

    Lube, T., 2013

    Research output: Book/Report › Commissioned report › Transfer

  32. Published

    Ber-14-2013-RoLiCer: RoLiCer Deliverable 8.2: Workshop “Fracture Mechanics” at MUL, May 2nd – 3rd, 2013

    Lube, T., 2013

    Research output: Book/Report › Commissioned report › Transfer

  33. Published

    Ber-20-2013-RoLiCer: RoLiCer @ MUL: Periodic Report (MONTH 18)

    Lube, T. & Rasche, S., 2013

    Research output: Book/Report › Commissioned report › Transfer

  34. Published

    Mechanical Properties of Ceramics

    Danzer, R., Lube, T., Morrell, R. & Supancic, P., 2013, Handbook of Advanced Ceramics. Amsterdam: Elsevier, p. 609-632

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  35. Published

    Vertraulicher Zwischenbericht vom 9.4.2013 (P048-F-02-03)

    Preis, W., Bucher, E., Egger, A., Perz, M., Schrödl, N., Waldhäusl, J., Sitte, W., Lube, T., Weirum, G., Janics, A., Hochenauer, C. & Kusnezoff, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  36. Published

    Zyklische Ermüdung technischer Keramiken in wässrigen Medien

    von der Wehd, C., Lube, T., Berroth, K., Khader, I., Kailer, A. & Degenhardt, U., 2013, Fortschritte in der Werkstoffprüfung für Forschung und Praxis. p. 379-384

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  37. 2012
  38. Published

    A Residual Stress Intensity Factor Solution for Knoop Indentation Cracks

    Lube, T., Fett, T., Fünfschilling, S., Hoffmann, M. & Oberacker, R., 2012, In: International Journal of Fracture. 175, p. 65-71

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Ber-41-2012-Rolicer: RoLiCer @ MUL: MONTH 1 - 3

    Lube, T. & Rasche, S., 2012

    Research output: Book/Report › Commissioned report › Transfer

  40. Published

    Ber-42-2012-Rolicer: RoLiCer @ MUL: MONTH 4 - 9

    Lube, T. & Rasche, S., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Surface Crack in Tension or in Bending - A Reassessment of the Newman and Raju Formula in Respect to Fracture Toughness Measurements in Brittle Materials

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 1491-1501

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    The Effect of Defects and Materials Texture on the Fracture of Low-Pressure Injection Moulded Alumina Components

    Lube, T., Morrell, R. & Kraleva, I., 2012, Fractography of Glasses and Ceramics VI. p. 57-64

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  43. Published

    The Notched Ball Test - Charaterisation of Surface Defects and Their Influence on Strength

    Lube, T., Witschnig, S., Supancic, P., Danzer, R. & Schöppl, O., 2012, Fractography of Glasses and Ceramics VI. p. 225-234

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  44. Published

    Toughness Measurement on Ball Specimens, Part I: Theoretical Analysis

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 1163-1173

    Research output: Contribution to journal › Article › Research › peer-review

  45. 2011
  46. Published

    Bruch von Keramiken aufgrund von Kontaktschädigung am Beispiel von Hüftgelenksimplantaten

    Danzer, R., Harrer, W. & Lube, T., 2011, Tagungsskript 10. Tagung Gefüge und Bruch. p. 127-133

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Defects and Fracture Statistics in Low-Pressure Injection Moulded Alumina Components

    Lube, T. & Kraleva, I., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 488-495

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Fracture Mechanisms of Structural and Functional Multilayer Ceramic Structures

    Bermejo Moratinos, R., Sestakova, L., Grünbichler, H., Lube, T., Supancic, P. & Danzer, R., 2011, Key engineering materials. Vol. 465. p. 41-46 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  49. Published

    Sub-critical crack growth in alumina - a comparison of different measurement and evaluation methods

    Lube, T. & Baierl, R., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. 156, p. 450-458

    Research output: Contribution to journal › Article › Research › peer-review

  50. 2010
  51. Published

    Aspects of strain and strength measurement in miniaturised testing for engineering metals and ceramics

    Lord, D. J., Roebuck, B., Morrell, R. & Lube, T., 2010, In: Materials science and technology. 26, p. 127-148

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Defects and Fracture Statistics in Low-pressure Injection Moulded Alumina Components

    Lube, T., Kraleva, I. & Veskovic, S., 2010, In: Practical metallography = Praktische Metallographie. 42, p. 159-164

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Fracture of Ceramics

    Danzer, R., Lube, T., Supancic, P. & Damani, R., 2010, Ceramics Science and Technology. p. 531-575

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  54. Published

    Fracture Toughness of Silicon Carbide Whisker Reinforced High Alumina Refractory

    Nindhia, T. T. G. & Lube, T., 2010, Proceedings of the 18th European Conference on Fracture. p. 836-840

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Keramische Verbundwerkstoffe

    Danzer, R. & Lube, T., 2010, In: MP materials testing : Materialprüfung . p. 20-26

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Optimal strength and fracture toughness of damage tolerant multilayer ceramics

    Bermejo, R., Sestakova, L., Lube, T. & Danzer, R., 2010, 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. 2009
  58. Published

    Comparison of Fracture Toughness Testing by the SEVNB- and the SCF Method in Silicon Nitride

    Nindhia, T. T. G. & Lube, T., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1 2 3 4 Next
View graph of relations

Contact

Phone: 4111

Latest Research Output

View more (161)