Svea Mayer

(Former)

51 - 100 out of 225Page size: 50

Research output

  1. 2018
  2. Published

    Mikrostrukturelle Charakterisierung einer pulvermetallurgisch hergestellten mehrphasigen TiAl-Legierung

    Burtscher, M., Pürstl, F., Schloffer, M., Mayer, S. & Clemens, H., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 151-156

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Multi-Scale Microstructural Characterization: The Role of Classic and High-Resolution Metallography in the Developement of Modern High-Performance Materials

    Schnitzer, R., Hofer, C., Mayer, S., Panzenböck, M., Holec, D. & Clemens, H., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 9, p. 584-602 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Skalenübergreifende Gefügechatakterisierung - Die Rolle der klassischen und hochauflösenden Metallographie bei der Entwicklung moderner Hochleistungswerkstoffe

    Schnitzer, R., Hofer, C., Mayer, S., Panzenböck, M., Holec, D. & Clemens, H., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 23-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Synchrotron X-rays in the development of multi-phase intermetallic TiAl alloys

    Erdely, P., Staron, P., Stark, A., Maawad, E., Schell, N., Clemens, H. & Mayer, S., 2018.

    Research output: Contribution to conference › Poster › Research

  6. 2017
  7. Published

    Impact of Alloying on Stacking Fault Energies in γ-TiAl

    Dumitraschkewitz, P., Clemens, H., Mayer, S. & Holec, D., 17 Nov 2017, In: Applied Sciences : open access journal. 7.2017, 11, 11 p., 1193.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Design and control of microstructure and texture by thermomechanical processing of a multi-phase TiAl alloy

    Spörk, P., Staron, P., Maawad, E., Schell, N., Klose, J., Clemens, H. & Mayer, S., 5 Oct 2017, In: Materials and Design. 131.2017, 5 October, p. 286-296 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. E-pub ahead of print

    Phase transformations in a β-solidifying γ-TiAl based alloy during rapid solidification

    Kastenhuber, M., Klein, T., Rashkova, B., Weißensteiner, I., Clemens, H. & Mayer, S., 1 Sept 2017, (E-pub ahead of print) In: Intermetallics. 91.2017, December, p. 100-109 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    Internal friction and atomic relaxation processes in an intermetallic Mo-rich Ti-44Al-7Mo (γ+βo) model alloy

    Usategui, L., No, M. L., Mayer, S., Clemens, H. & Juan, J. S., 9 Jun 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700.2017, 17 July, p. 495-502 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. E-pub ahead of print

    Intermetallic β-Solidifying γ-TiAl Based Alloys − From Fundamental Research to Application

    Mayer, S., Erdely, P., Fischer, F.-D., Holec, D., Kastenhuber, M., Klein, T. & Clemens, H., 23 Feb 2017, (E-pub ahead of print) In: Advanced engineering materials. 19.2017, 4, 27 p., 1600735.

    Research output: Contribution to journal › Article › Research › peer-review

  12. E-pub ahead of print

    Mechanical behavior and related microstructural aspects of a nano-lamellar TiAl alloy at elevated temperatures

    Klein, T., Usategui, L., Rashkova, B., Nó, M. L., San Juan, J. M., Clemens, H. & Mayer, S., 20 Feb 2017, (E-pub ahead of print) In: Acta materialia. 128.2017, 15 April, p. 440-450 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    The Use of Fluorine to Protect β-Solidifying γ-TiAl-Based Alloys against High-Temperature Oxidation

    Donchev, A., Galetz, M., Mayer, S., Clemens, H. & Schütze, M., 13 Feb 2017, In: MRS Advances. 2017, May, p. 1361-1367 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. E-pub ahead of print

    Impact of Mo on the ωo phase in β-solidifying TiAl alloys: An experimental and computational approach

    Klein, T., Schachermayer, M., Holec, D., Rashkova, B., Clemens, H. & Mayer, S., 1 Feb 2017, (E-pub ahead of print) In: Intermetallics. 85.2017, June, p. 26-33 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Advanced intermatallic titanium aluminides - from fundamentals to application

    Mayer, S., 2017

    Research output: Thesis › Habilitation thesis › peer-review

  16. Published

    Advanced Intermetallic TiAl Alloys

    Clemens, H. & Mayer, S., 2017, Materials Science Forum. 879 ed. Vol. 2017. p. 113-118 6 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  17. Published

    Contribution of High-Energy X-Rays and Neutrons to Characterization and Development of Intermetallic Titanium Aluminides

    Schmoelzer, T., Liss, K.-D., Staron, P., Stark, A., Schwaighofer, E., Lippmann, T., Clemens, H. & Mayer, S., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 395-424

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  18. Published

    Correlation of local mechanical properties and chemical compositin in a C-containing TiAl alloy studied by nanoindentation and atom probe tomography

    Klein, T., Schachermayer, M., Mendez Martin, F., Schöberl, T., Rashkova, B., Clemens, H. & Mayer, S., 2017.

    Research output: Contribution to conference › Poster › Research

  19. Published

    Deformation mechanisms and texture evolution in a multi-phase TiAl alloy investigated by means of synchrotron radiation

    Erdely, P., Staron, P., Maawad, E., Schell, N., Klose, J., Mayer, S. & Clemens, H., 2017.

    Research output: Contribution to conference › Poster › Research

  20. Published

    Effect of hot rolling and primary annealing on the microstructure and texture of a β-stabilised γ-TiAl based alloy

    Erdely, P., Staron, P., Maawad, E., Schell, N., Klose, J., Mayer, S. & Clemens, H., 2017, In: Acta materialia. 126.2017, March, p. 145-153 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Effect of microstructural instability on the creep resistance of an advanced intermetallic γ-TiAl based alloy

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2017, In: Intermetallics. 80.2017, January, p. 1-9 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Microstructure and Properties of Engineering Materials

    Clemens, H., Mayer, S. & Scheu, C., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 3-20

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  23. Published

    Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications

    Staron, P., Schreyer, A., Clemens, H. & Mayer, S., 2017, 2 ed. Wiley-VCH . 462 p.

    Research output: Book/Report › Scholarly edition

  24. Published

    Untersuchungen des Ausscheidungsverhaltens von H-Karbiden in einer kohlenstoffhaltigen TiAl Legierung mittels in- und ex-situ Experimenten

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2017, Praktische Metallographie Sonderband 51. p. 55-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Werkstoffcharakterisierung mittels hochauflösender dreidimensionaler Atomsondentomographie

    Mayer, S., Maier-Kiener, V., Mendez Martin, F., Panzenböck, M., Rashkova, B. & Clemens, H., 2017, In: Jahresmagazin Materialographie, Metallographie : Ingenieurwissenschaften ... : im Fokus. 2017, p. 56-60 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. 2016
  27. Published

    Creep Behavior of a β-solidifying TiAl Alloy with Fully Lamellar Microstructure

    Burtscher, M., Klein, T., Mayer, S. & Clemens, H., 28 Nov 2016.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    Advancement of Compositional and Microstructural Design of Intermetallic γ-TiAl Based Alloys Determined by Atom Probe Tomography

    Klein, T., Clemens, H. & Mayer, S., 6 Sept 2016, In: Materials. 9.2016, 9, p. 755-774 20 p., 755.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Textur- und Gefügeentwicklung in warmgewalzten und wärmebehandelten TNM-Blechen

    Erdely, P., Staron, P., Maawad, E., Schell, N., Bartels, A., Güther, V., Rothe, C., Klose, J., Mayer, S. & Clemens, H., 13 Apr 2016, p. 1-13.

    Research output: Contribution to conference › Presentation › Research

  30. Published

    Designkriterien für kriechfeste Titanaluminid-Legierungen

    Clemens, H. & Mayer, S., 12 Apr 2016, p. 1-18.

    Research output: Contribution to conference › Presentation › Research

  31. Published

    In Situ Characterization Techniques Based on Synchrotron Radiation and Neutrons Applied for the Development of an Engineering Intermetallic Titanium Aluminide Alloy

    Erdely, P., Schmoelzer, T., Schwaighofer, E., Clemens, H., Staron, P., Stark, A., Liss, K.-D. & Mayer, S., 4 Jan 2016, In: Metals : open access journal . 6.2016, 1, p. 1-27 27 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Advanced Intermetallic Titanium Aluminides

    Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  33. Published

    Advanced Intermetallic Titanium Aluminides

    Clemens, H., Smarsly, W., Güther, V. & Mayer, S., 2016, 13th World Conference on Titanium. USA, p. 1189–1200 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Alloy Design Rules for Advanced Titanium Aluminides

    Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  35. Published

    Alloy Design Rules for Advanced Titanium Aluminides

    Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  36. Published

    Characterisation of advanced intermetallic titanium aluminide alloys by means of diffraction and scattering techniques

    Erdely, P., Mayer, S. & Clemens, H., 2016.

    Research output: Contribution to conference › Poster › Research

  37. Published

    Die Rolle der Metallographie bei der Charakterisierung von Hochleistungswerkstoffe

    Mayer, S., Rashkova, B., Mendez Martin, F., Primig, S., Panzenböck, M. & Clemens, H., 2016, In: Jahresmagazin Materialographie, Metallographie : Ingenieurwissenschaften ... : im Fokus. 2016, p. 82-87 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Evolution of texture and microstructure in multi-phase TNM sheets during hot rolling and subsequent heat treatments

    Erdely, P., Staron, P., Maawad, E., Schell, N., Güther, V., Rothe, C., Klose, J., Clemens, H. & Mayer, S., 2016. 1 p.

    Research output: Contribution to conference › Poster › Research

  39. Published

    Experimental and theoretical evidence of displacive martensite in an intermetallic Mo-containing Ƴ-TiAl based alloy

    Mayer, S., Petersmann, M., Fischer, F. D., Clemens, H., Waitz, T. & Antretter, T., 2016, In: Acta materialia. 115, p. 242-249 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Intermetallic titanium aluminides in aerospace applications – processing, microstructure and properties

    Clemens, H. & Mayer, S., 2016, In: Materials at High Temperatures. 33, p. 560-570 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Precipitation-strengthened high-temperature ferrites

    Godor, F., Liebscher, C., Stein, F., Palm, M., Rashkova, B., Maier-Kiener, V., Mayer, S. & Clemens, H., 2016.

    Research output: Contribution to conference › Presentation › Research

  42. Published

    Preparation Methods for Examining the ωo-Phase Formation in a β-Solidifying TiAl Alloy via Atom Probe Tomography

    Schachermayer, M., Klein, T., Clemens, H. & Mayer, S., 2016, In: Practical metallography = Praktische Metallographie. 53, 2, p. 73-85 13 p., 53 (2016) 2.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Silicon distribution and silicide precipitation during annealing in an advanced multi-phase g-TiAl based alloy

    Klein, T., Rashkova, B., Holec, D., Clemens, H. & Mayer, S., 2016, In: Acta materialia. 110, p. 236-245 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Silicon distribution and silicide precipitation in an advanced multi-phase γ-TiAl based alloy during annealing

    Klein, T., Rashkova, B., Holec, D., Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  45. Published

    Texture evolution in multi-phase TNM sheet materials measured by means of high-energy X-ray diffraction

    Erdely, P., Staron, P., Maawad, E., Schell, N., Güther, V., Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conference › Poster › Research

  46. 2015
  47. Published

    Improving the creep behavior and microstructural stability of an advanced γ-TiAl based alloy

    Kastenhuber, M., Rashkova, B., Mayer, S. & Clemens, H., 14 Dec 2015.

    Research output: Contribution to conference › Presentation › Research

  48. Published

    Ab initio study on stacking faults in gamma-TiAl

    Dumitraschkewitz, P., Clemens, H., Mayer, S. & Holec, D., 2 Oct 2015.

    Research output: Contribution to conference › Poster › Research

  49. E-pub ahead of print

    Characterization of the high temperature deformatin behavior of two intermetallic TiAl-Mo alloys

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 18 Sept 2015, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 648.2015, 11 November, p. 208-216 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. E-pub ahead of print

    Carbon distribution in multi-phase γ-TiAl based alloys and its influence on mechanical properties and phase formation

    Klein, T., Schachermayer, M., Mendez Martin, F., Schöberl, T., Rashkova, B., Clemens, H. & Mayer, S., 21 May 2015, (E-pub ahead of print) In: Acta materialia. 94.2015, 1 August, p. 205-213 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Enhancing the operation temperature of TiAl-alloys

    Kastenhuber, M., Rashkova, B., Mayer, S. & Clemens, H., 19 May 2015.

    Research output: Contribution to conference › Presentation › Research

  52. E-pub ahead of print

    Enhancement of creep properties and microstructural stability of intermetallic β-solidifying γ-TiAl based alloys

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 14 Apr 2015, (E-pub ahead of print) In: Intermetallics. 63.2015, August, p. 19-26 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Interplay between effect of Mo and chemical disorder on the stability of β/βo-TiAl phase

    Holec, D., Legut, D., Isaeva, L., Souvatzis, P., Clemens, H. & Mayer, S., 1 Jan 2015, In: Intermetallics. 61, p. 85-90 6 p., 5631.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Advanced intermetallic titanium aluminides

    Clemens, H., Mayer, S., Smarsly, W., Haberl, U. & Güther, V., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

Previous 1 2 3 4 5 Next
View graph of relations

Latest Research Output

View more (225)