Svea Mayer

(Former)

101 - 200 out of 225Page size: 100

Research output

  1. 2015
  2. Published

    Atom probe study of ωo phase in a β phase containing TiAl alloy

    Klein, T., Schachermayer, M., Mendez Martin, F., Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Poster › Research

  3. Published

    Decording the nanostructure of advanced TiAl alloys

    Schwaighofer, E., Staron, P., Rashkova, B., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2015, 2 p.

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    Enhancement of the application temperature of titanium aluminides

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 7, p. 342-345

    Research output: Contribution to journal › Article › Research

  5. Published

    Evolution of the ω-phase in a multi-phase TiAl alloy and its effect on hardness

    Rashkova, B., Klein, T., Schachermayer, M., Mendez Martin, F., Schöberl, T., Zhang, Z., Mayer, S. & Clemens, H., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  6. Published

    Grain growth and β to α transformation behavior of a β-solidifying TiAl alloy

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2015, In: Advanced engineering materials. 17, 6, p. 786-790

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    High temperature laser-scanning confocal microscopy for the in-situ investigation of grain growth and phase transformations in intermetallic γ-TiAl based alloys

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 5, p. 259-269

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Influence of discontinuous precipitation on the creep behavior of a ß-solidified γ-TiAl based alloy

    Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 5, p. 249-258

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    In-situ Charakterisierungsmethoden: Ein wichtiges Werkzeug bei der Entwicklung von intermetallischen Titanaluminiden

    Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  10. Published

    In-situ high-energy X-ray diffraction on an intermetallic ß-stabilised γ-TiAl based alloy

    Erdely, P., Stark, A., Clemens, H. & Mayer, S., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 5, p. 221-225

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    In-situ study of the time-temperature-transformation behaviour of a multi-phase intermetallic beta-stabilised TiAl alloy

    Erdely, P., Werner, R., Schwaighofer, E., Clemens, H. & Mayer, S., 2015, In: Intermetallics. 57, p. 17-24

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    In-situ study of the time-temperature-transformation behaviour of an intermetallic γ-TiAl based alloy

    Erdely, P., Werner, R., Schwaighofer, E., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  13. Published

    Intermetallische Titanaluminide als innovative Hochtemperaturleichtbau- werkstoffe – wie materialographische Methoden zu ihrer Entwicklung beigetragen haben

    Clemens, H. & Mayer, S., 2015, p. 19-28.

    Research output: Contribution to conference › Presentation › Research › peer-review

  14. Published

    Intermetallische Titanaluminide als innovative Hochtemperaturleichtbauwerkstoffe – wie materialographische Methoden zu ihrer Entwicklung beigetragen haben

    Clemens, H. & Mayer, S., 2015, Praktische Metallographie. Vol. Sonderband 47 . p. 19-28

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Intermetallische Titanaluminide als innovative Hochtemperaturleichtbauwerkstoffe – wie materialographische Methoden zu ihrer Entwicklung beigetragen haben

    Clemens, H. & Mayer, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 12, p. 691-720

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Metallography - A Powerful Instrument for Material Characterisation, Material Development and Failure Analysis

    Panzenböck, M., Hawranek, G., Mendez Martin, F., Mayer, S., Pölzl, S., Schütz, P., Primig, S., Rashkova, B. & Clemens, H., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  17. Published

    Microstructural characterization of intermetallic Mo-containing TiAl-Si alloys after high temperature deformation

    Godor, F., Werner, R., Lindemann, J., Mayer, S. & Clemens, H., 2015.

    Research output: Contribution to conference › Presentation › Research

  18. Published

    Microstructural evolution and grain refinement in an intermetallic titanium aluminide alloy with molybdenum content

    Rashkova, B., Spiradek-Hahn, K., Brabetz, M., Zhang, Z., Schöberl, T., Clemens, H. & Mayer, S., 2015, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 106, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Microstructure characterization of intermetallic γ-TiAl based alloys after high-temperature deformation

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 5, p. 239-248

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Oxidation protection of multiphase Mo-containing γ-TiAl-based alloys under cyclic test conditions

    Donchev, A., Pflumm, R., Galetz, M., Mayer, S., Clemens, H. & Schütze, M., 2015, Materials Research Society Symposium Proceedings Vol. 1760.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  21. Published

    Pulvermetallurgie von intermetallischen Titanaluminiden

    Mayer, S. & Clemens, H., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, p. 513 - 516 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Segregation of C and si in lamellar microstructures of β-solidifying γ-TiAl-based alloys

    Klein, T., Rashkova, B., Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  23. Published

    Stacking fault energies and the generalized stacking fault energy of γ-TiAl (ongoing Masterthesis)

    Dumitraschkewitz, P., Clemens, H., Mayer, S. & Holec, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  24. Published

    The role of metallography in the development and characterization of high-performance materials

    Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2015, In: Practical metallography = Praktische Metallographie. 52.2015, 2, p. 59-74 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    The use of atom probe tomography for the characterization and development of intermetallic γ-TiAl based alloys

    Klein, T., Schachermayer, M., Mendez Martin, F., Holec, D., Rashkova, B., Schöberl, T., Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  26. 2014
  27. Published

    Komplementäre Werkstoffcharakterisierung am Department Metallkunde und Werkstoffprüfung

    Mayer, S., Panzenböck, M. & Clemens, H., 6 Aug 2014, In: Dialog : Materialwissenschaft und Werkstofftechnik . p. 56-57

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Advanced intermetallic γ-TiAl based alloys with improved microstructural stability during creep

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  29. Published

    Advanced intermetallic γ-TiAl based alloys with improved microstructural stability during creep

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2014, Materials Research Society Symposium Proceedings Vol. 1760 Materials Research Society.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Alloying element distribution within the constituent phases of a C-containing γ-TiAl based alloy studied by atom probe tomography

    Klein, T., Mendez Martin, F., Schachermayer, M., Schöberl, T., Rashkova, B., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  31. Published

    Atomic relaxation processes in an intermetallic Ti-43Al-4Nb-1Mo-0.1B alloy studied by mechanical spectroscopy

    Juan, J. S., Simas, P., Schmölzer, T., Clemens, H., Mayer, S. & No, M. L., 2014, In: Acta materialia. 65, p. 338-350

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Constitutive analysis and microstructure evolution of the high-temperature deformation behavior of an advanced intermetallic multi-phase gamma-TiAl-based alloy

    Werner, R., Schwaighofer, E., Schloffer, M., Clemens, H., Lindemann, J. & Mayer, S., 2014, Advanced Materials Research. p. 807-812

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Constitutive analysis of the flow curve behavior of an intermetallic beta-solidifying gamma-TiAl-based alloy and microstructural characterization of the deformed state

    Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  34. Published

    Constitutive analysis of the flow curve behavior of an intermetallic beta-solidifying gamma-TiAl-based alloy and microstructural characterization of the deformed state

    Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 286-288

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Development status, applications and perspectives of advanced intermetallic titanium aluminides

    Clemens, H. & Mayer, S., 2014, Materials Science Forum. p. 15-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Die Rolle der Metallographie bei Entwicklung und Charakterisierung von Hochleistungswerkstoffen

    Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2014, Sonderbände der Praktischen Metallographie 46. p. 3-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Distribution of alloying elements within the constituent phases of a C-containing gamma-TiAl based alloy studied by atom probe tomography: Mater. Res. Soc. Symp. Proc. Vol.1760 2014 Materials Research Society

    Klein, T., Mendez Martin, F., Schachermayer, M., Rashkova, B., Clemens, H. & Mayer, S., 2014

    Research output: Non-textual form › Web publication/site › Research

  38. Published

    Effect of carbon addition on solidification behavior, phase evolution and creep properties of an intermetallic beta-stabilized gamma-TiAl based alloy

    Schwaighofer, E., Rashkova, B., Clemens, H., Stark, A. & Mayer, S., 2014, In: Intermetallics. 46, p. 173-184

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Einfluss der diskontinuierlichen Ausscheidung auf das Kriechverhalten einer beta-erstarrenden gamma-TiAl-Basislegierung

    Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 189-194

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Einfluss der diskontinuierlichen Ausscheidung auf das Kriechverhalten einer β-erstarrenden γ-TiAl-Basislegierung

    Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2014, p. 189-194.

    Research output: Contribution to conference › Presentation › Research › peer-review

  41. Published

    Evolution of the omega-phase in a beta-stabilized multi-phase TiAl alloy and its effect on the hardness

    Rashkova, B., Schloffer, M., Schöberl, T., Schwaighofer, E., Zhang, Z., Mayer, S. & Clemens, H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Evolution of the ordered omega phase in a beta-stabilized multi-phase TiAl alloy and its effect on hardness

    Schloffer, M., Rashkova, B., Schöberl, T., Schwaighofer, E., Zhang, Z., Clemens, H. & Mayer, S., 2014, In: Acta materialia. 64, p. 241-252

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Evolution of the ω-Phase in a β-stabilized multi-phase TiAl alloy and ist effect on the hardness

    Rashkova, B., Schloffer, M., Schöberl, T., Zhang, Z., Mayer, S. & Clemens, H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    First principles study on the impact of chemical disorder and Mo alloying on stability of the cubic b/bo phase in TiAl

    Holec, D., Legut, D., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  45. Published

    Fortschritte in der Metallographie 46

    Mayer, S. (Editor), Panzenböck, M. (Editor) & Clemens, H. (Editor), 2014, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  46. Published

    Fracture and R-curve behavior of an intermetallic β-stabilized TiAl alloy with different nearly lamellar microstructures

    Leitner, T., Schloffer, M., Mayer, S., Eßlinger, J., Clemens, H. & Pippan, R., 2014, In: Intermetallics. 53, p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Gefügecharakterisierung intermetallischer gamma-TiAl-Legierungen nach Hochtemperaturverformung

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 113-118

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Gefügecharakterisierung intermetallischer γ-TiAl-Legierungen nach Hochtemperaturverformung

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014, p. 113-118.

    Research output: Contribution to conference › Presentation › Research › peer-review

  49. Published

    High-temperature oxidation behavior of multi-phase Mo-containing gamma-TiAl-based alloys

    Pflumm, R., Donchev, A., Mayer, S., Clemens, H. & Schütze, M., 2014, In: Intermetallics. 53, p. 45-55

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Hochtemperatur Laser-Scanning Konfokal-Mikroskopie zur in-situ Untersuchung von Kornwachstum und Phasenumwandlungen in intermetallischen gamma-TiAl Legierungen

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 195-200

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Hot-working behavior of an advanced intermetallic multi-phase gamma-TiAl based alloy

    Schwaighofer, E., Clemens, H., Lindemann, J., Stark, A. & Mayer, S., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 614, p. 297-310

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    In-situ small-angle X-ray scattering study of the Perovskite-type carbide precipitation behavior in a carbon-containing intermetallic TiAl alloy using synchrotron radiation: DESY Annual Report 2013

    Schwaighofer, E., Staron, P., Rashkova, B., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2014

    Research output: Non-textual form › Web publication/site › Transfer

  53. Published

    In-situ small-angle X-ray scattering study of the Perovskite-type carbide precipitation behavior in a carbon-containing intermetallic TiAl alloy using synchrotron radiation

    Schwaighofer, E., Staron, P., Rashkova, B., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2014, In: Acta materialia. 77, p. 360-369

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    In-situ time-temperature-transformation behaviour of an intermetallic beta-solidifying TiAl alloy using synchrotron radiation

    Erdely, P., Werner, R., Schwaighofer, E., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  55. Published

    Microstructural design and mechanical properties of a cast and heat-treated intermetallic multi-phase gamma-TiAl based alloy

    Schwaighofer, E., Clemens, H., Mayer, S., Lindemann, J., Klose, J., Smarsly, W. & Guether, V., 2014, In: Intermetallics. 44, p. 128-140

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Microstructure and texture evolution in an intermetallic β-stabilized TiAl alloy during forging and subsequent isothermal annealing

    Gaitzenauer, A., Stark, A., Gosslar, D., Clemens, H. & Mayer, S., 2014, In: Advanced engineering materials. 16, p. 445-451

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Microstructure evolution and grain refinement process in an intermetallic TiAl alloy with high Mi content

    Rashkova, B., Spiradek-Hahn, K., Brabetz, M., Zhang, Z., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  58. Published

    Microstructures and mechanical properties of a multi-phase beta-solidifying TiAl alloy densified by spark plasma sintering

    Voisin, T., Monchoux, J.-P., Hantcherli, M., Mayer, S., Clemens, H. & Couret, A., 2014, In: Acta materialia. 73, p. 107-115

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Mikrostruktur - Eigenschaftsbeziehung einer warmumgeformten intermetallischen γ-TiAl-Legierung

    Lehner, A., Clemens, H., Voigt, P., Hempel, R. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  60. Published

    Oxidation protection of multiphase Mo containing gamma-TiAl based alloys

    Donchev, A., Pflumm, R., Galetz, M., Mayer, S., Clemens, H. & Schütze, M., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  61. Published

    Phase and interstitial element characterization via atom probe tomography in a multi-phase TiAl based alloy

    Mendez Martin, F., Klein, T., Schachermayer, M., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  62. Published

    Phasenumwandlungen und Kornwachstumsverhalten in β-stabilisierten TiAl Legierungen

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  63. Published

    Phase transformations and grain growth behaviour in beta-stabilized TiAl alloys

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  64. Published

    Phase transformations and grain growth in beta-stabilized TiAl alloys

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 289-290

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    The use of in-situ characterization techniques for the development of intermetallic titanium aluminides

    Mayer, S., Schwaighofer, E., Schloffer, M. & Clemens, H., 2014, Materials Science Forum. p. 2097-2102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. 2013
  67. Published

    3D Characterization of an Intermetallic beta/gamma-Titanium aluminide alloy

    Engstler, M., Mayer, S., Pauly, C., Clemens, H. & Mücklich, F., 2013, In: Advanced engineering materials. 15, p. 1125-1128

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Advanced beta-solidiying titanium aluminides – Development status and perspectives

    Clemens, H., Schloffer, M., Schwaighofer, E., Werner, R., Gaitzenauer, A., Rashkova, B., Schmölzer, T., Pippan, R. & Mayer, S., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 3-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    An in-situ high-energy X-ray diffraction study on the hot-deformation behavior of a beta-phase containing TiAl alloy

    Schmölzer, T., Liss, K.-D., Kirchlechner, C., Mayer, S., Stark, A., Peel, M. & Clemens, H., 2013, In: Intermetallics. 39, p. 25-33

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Characterization of closely crystallographically related phases in gamma-TiAl alloys by HEXRD and TEM imaging

    Gabrisch, H., Mayer, S., Pyczak, F., Rackel, M., Lorenz, U., Schell, N., Schreyer, A. & Stark, A., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  71. Published

    Constitutive analysis and microstructure evolution of the high-temperature deformation behavior of an advanced intermetallic multi-phase gamma-TiAl-based alloy

    Werner, R., Schwaighofer, E., Schloffer, M., Clemens, H., Lindemann, J. & Mayer, S., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  72. Published

    Design, processing, microstructure, properties and applications of advanced intermetallic TiAl alloys

    Clemens, H. & Mayer, S., 2013, In: Advanced engineering materials. 15, p. 191-215

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Evolution of the omega-phase and its effect on the hardness of the beta-phase in Ti-44Al-4Nb-1Mo alloys

    Rashkova, B., Schloffer, M., Schöberl, T., Zhang, Z., Mayer, S. & Clemens, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  74. Published

    Gefüge und Eigenschaften einer mehrphasigen intermetallischen Titanaluminidlegierung für innovative Leichtbauanwendungen

    Gaitzenauer, A., Schenk, M., Kuchling, W., Clemens, H., Voigt, P., Hempel, R. & Mayer, S., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 113-117

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    High temperature oxidation protection of multi-phase Mo-containing TiAl-alloys by the fluorine effect

    Donchev, A., Pflumm, R., Mayer, S., Clemens, H. & Schütze, M., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 95-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    In situ high-energy XRD study of the hot-deformation behavior of a novel gamma-TiAl alloy

    Stark, A., Schwaighofer, E., Mayer, S., Clemens, H., Lippmann, T., Lottermoser, L., Schreyer, A. & Pyczak, F., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 71-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Microstructure – Property Relationship in a Near Net Shape Forged γ-TiAl Based Alloy

    Gaitzenauer, A., Clemens, H., Voigt, P., Hempel, R. & Mayer, S., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  78. Published

    Optimized Hot-forming of an Intermetallic Multi-phase gamma-TiAl based alloy

    Gaitzenauer, A., Müller, M., Clemens, H., Voigt, P., Hempel, R. & Mayer, S., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 29-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    Relaxation processes at high temperatures in an TiAl-Nb-Mo intermetallics

    Simas, P., Schmölzer, T., Mayer, S., No, M. L., Clemens, H. & Juan, J. S., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 41-46

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Thermodynamic calculations of phase equilibria and phase fractions of a beta-solidifying TiAl alloy using the CHALPAD approach

    Werner, R., Schloffer, M., Schwaighofer, E., Clemens, H. & Mayer, S., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 59-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. 2012
  82. Published

    Eigenschaftsoptimiertes Warmumformen einer intermetallischen Titanaluminid-Legierung

    Gaitzenauer, A., Müller, M., Clemens, H., Voigt, P., Hempel, R. & Mayer, S., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 319-322

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Hot Deformation of Cast and Extruded TiAl: An In-situ Diffraction Study

    Schmölzer, T., Liss, K.-D., Mayer, S., Yan, K., Reid, M., Dippenaar, R., Peel, M. & Clemens, H., 2012,

    Proceedings of International Conference of Processing & Manufacturing of Advanced Materials

    .     p. 1725-1730

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Influence of heat treatments on the microstructure of a multi-phase titanium aluminide alloy

    Schwaighofer, E., Schloffer, M., Schmölzer, T., Mayer, S., Lindemann, J., Guether, V., Klose, J. & Clemens, H., 2012, In: Practical metallography = Praktische Metallographie. 49, p. 124-137

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    In situ forging experiments at HARWI II with advanced TiAl alloys: HASYLAB Annual Report

    Stark, A., Schwaighofer, E., Mayer, S., Lottermoser, L., Lippmann, T., Oehring, M., Clemens, H., Pyczak, F. & Schreyer, A., 2012

    Research output: Non-textual form › Web publication/site › Research

  86. Published

    In Situ Study of Gamma-TiAl Lamellae Formation in Supersaturated alpha 2-Ti3Al Grains

    Cha, L., Schmölzer, T., Zhang, Z., Mayer, S., Clemens, H., Staron, P. & Dehm, G., 2012, In: Advanced engineering materials. 14, p. 299-303

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    In situ study of the hot-working behavior of an advanced intermetallic multi-phase gamma-TiAl based alloy: HASYLAB Annual Report

    Schwaighofer, E., Stark, A., Lottermoser, L., René, K., Clemens, H., Mayer, S. & Schell, N., 2012

    Research output: Non-textual form › Web publication/site › Research

  88. Published

    In situ synchrotron radiation study during hot compressive deformation of a novel gamma TiAl alloy

    Stark, A., Schwaighofer, E., Mayer, S., Lippmann, T., Lottermoser, L., Pyczak, F., Clemens, H. & Schreyer, A., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  89. Published

    In situ synchrotron study of B19 phase formation in an intermetallic gamma-TiAl alloy

    Schmölzer, T., Stark, A., Schwaighofer, E., Lippmann, T., Mayer, S. & Clemens, H., 2012, In: Advanced engineering materials. 14, p. 445-448

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Micro- and nanostructure evolution in intermetallic titanium aluminides

    Clemens, H. & Mayer, S., 2012, Ti-2011 - Proceedings of the 12th World Conference on Titanium. p. 395-403

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Microstructural evolution and mechanical properties of a cast and heat-treated TiAl alloy

    Schwaighofer, E., Lindemann, J., Klose, J., Guether, V., Schloffer, M., Schmölzer, T., Clemens, H. & Mayer, S., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  92. Published

    Microstructure development and hardness of a powder metallurgical multi phase y-TiAl based alloy

    Schloffer, M., Iqbal, F., Gabrisch, H., Schwaighofer, E., Schimansky, F.-P., Mayer, S., Stark, A., Lippmann, T., Göken, M., Pyczak, F. & Clemens, H., 2012, In: Intermetallics. 22, p. 231-240

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Microstructure evolution and grain refinement processes in the intermetallic TiAl-Mo alloy system

    Rashkova, B., Sailer, C., Clemens, H., Schöberl, T., Spiradek-Hahn, K., Brabetz, M., Dehm, G. & Mayer, S., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  94. Published

    Mikrostruktur und mechanische Eigenschaften einer intermetallischen gamma TiAl-Basislegierung für Leichtbauanwendungen: Forum für Metallurgie und Werkstofftechnik

    Schwaighofer, E., Mayer, S. & Clemens, H., 2012

    Research output: Non-textual form › Web publication/site › Research

  95. Published

    The effect of molybdenum on the phase transformation behavior of beta/gamma-TiAl alloys

    Mayer, S., Sailer, C., Lindemann, J., Lippmann, T., Takeyama, M., Staron, P. & Clemens, H., 2012, Ti-2011 - Proceedings of the 12th World Conference on Titanium. p. 1421-1424

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. 2011
  97. Published

    Friction Welding of Intermetallic Titanium Aluminides: Microstructural Evolution and Mechanical Properties

    Mayer, S., Appel, L., Cramer, H. & Clemens, H., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 572-581

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    In situ diffraction experiments for the investigation of phase fractions and ordering temperatures in Ti-44 at% Al-(3-7) at% Mo alloys.

    Schmölzer, T., Mayer, S., Sailer, C., Haupt, F., Güther, V., Staron, P., Liss, K.-D. & Clemens, H., 2011, In: Advanced engineering materials. 13, p. 306-311

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Intermetallisches Titanaluminid - Ein innovativer Leichtbauwerkstoff für Hochtemperaturanwendungen

    Clemens, H. & Mayer, S., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. p. 255-260

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Intermetallische y-Titanaluminid-Basislegierungen aus metallographischer Sicht - eine Fortsetzung

    Clemens, H. & Mayer, S., 2011, In: Practical metallography = Praktische Metallographie. p. 64-100

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    On phase equilibria and phase transformations in ß/y-TiAl alloys - a short review

    Mayer, S., Sailer, C., Schmölzer, T., Clemens, H., Lippmann, T., Staron, P., Güther, V. & Takeyama, M., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. 156, p. 438-442

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Phase Equilibria and Phase Transformations in Molybdenum-Containing TiAl Alloys

    Mayer, S., Sailer, C., Nakashima, H., Schmölzer, T., Lippmann, T., Staron, P., Liss, K.-D., Clemens, H. & Takeyama, M., 2011, Materials Research Society symposium proceedings Vol. 1295. Materials Research Society : MRS, p. 113-118

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Phase fraction evolution in a multi-phase intermetallic gamma-TiAl based alloy: HASYLAB Annual Report

    Schwaighofer, E., Schloffer, M., Schmölzer, T., Clemens, H., Stark, A., Staron, P., Lippmann, T. & Mayer, S., 2011

    Research output: Non-textual form › Web publication/site › Research

  104. Published

    Phase transition and ordering behavior of ternary Ti-Al-Mo alloys using in-situ neutron diffraction

    Kabra, S., Yan, K., Mayer, S., Schmölzer, T., Reid, M., Dippenaar, R., Clemens, H. & Liss, K.-D., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 697-702

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Physical Metallurgy and Properties of ß-solidifying TiAl Based Alloys

    Clemens, H., Schmölzer, T., Schloffer, M., Schwaighofer, E., Mayer, S. & Dehm, G., 2011, Materials Research Society symposium proceedings Volume 1295. Materials Research Society : MRS, p. 95-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (225)