Susanne Katharina Michelic

101 - 135 out of 135Page size: 100

Research output

  1. 2014
  2. Published

    Characterization of acicular ferrite microstructures using etching methods, optical microscopy and HT-LSCM

    Loder, D., Michelic, S. & Bernhard, C., 2014, Sonderbände der praktischen Metallographie - Fortschritte in der Metallographie. p. 125-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Experimental study on the formation of non-metallic inclusions acting as nuclei for acicular ferrite in HSLA steels through specific deoxidation practice and defined cooling conditions

    Michelic, S., Loder, D., Arth, G. & Bernhard, C., 2014, Materials Science Forum: Proceedings THERMEC 2013. Vol. 783-786. p. 1079-1084

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    In situ observation of acicular ferrite formation using HT-LSCM: possibilities, challenges and influencing factors

    Loder, D., Michelic, S., Mayerhofer, A., Bernhard, C. & Dippenaar, R., 2014, Proceedings of MS&T14 . p. 469-476

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    In-situ observation of the dissolution of SiO2 particles in CaO-Al2O3-SiO2 slags and mathematical analysis of its dissolution pattern

    Feichtinger, S., Michelic, S., Kang, Y.-B. & Bernhard, C., 2014, In: Journal of the American Chemical Society. 97, p. 316-325

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    The Use of HT-LSCM for the In Situ Observation of Acicular Ferrite

    Loder, D., Michelic, S. & Bernhard, C., 2014.

    Research output: Contribution to conference › Poster › Research

  7. 2013
  8. Published

    Etching Methods for the Computerized Analysis of Acicular Ferrite in Steel Microstructures

    Loder, D., Michelic, S. & Bernhard, C., 2013.

    Research output: Contribution to conference › Poster › Research

  9. Published

    Inclusion Removal and Modification in Remelting Processes with Special Regard to Inclusion Dissolution in CaO-Al2O3-CaF2 Slags

    Michelic, S., Schider, S. & Bernhard, C., 2013,

    INTECO Melting, Refining, Casting & Remelting Symposium 2013 - Proceedings

    .     p. 172-184

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    In-situ Beobachtung von Phasenumandlungen in Stählen

    Schider, S., Gamsjäger, E., Michelic, S. & Bernhard, C., 2013, Prakt. Met. Sonderband 45. p. 139-144

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Systematische Optimierung von Stahleigenschaften durch nichtmetallische Einschlüsse

    Loder, D., Michelic, S. & Bernhard, C., 2013.

    Research output: Contribution to conference › Poster › Research

  12. 2012
  13. Published

    Anwendungsbeispiele für die Verwendung neuer analytischer Prüftechniken bei Hochleistungsstählen

    Werl, R., Klösch, G., Winkler, W., Pissenberger, A., Egger, M., Aigner, S., Pühringer, J., Michelic, S., Bernhard, C., Schützenhöfer, W., Schneider, R. & Schüller, C., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 194-203

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Charakterisierung von nichtmetallischen Einschlüssen in Titan legierten ferritischen Chromstählen

    Loder, D., Michelic, S., Reip, T. & Bernhard, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Critical evaluation of prospects and limitations of steel cleanness characterisation using automated SEM/EDS analysis

    Michelic, S., Bernhard, C., Wieser, G. & Lederhaas, B., 2012, Proceedings of the 8th International Conference on Clean Steel. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Determination of Decisive Factors Influencing the Inclusion Landscape in Electroslag Remelted Ingots

    Michelic, S., Tanzer, R., Schützenhöfer, W. & Bernhard, C., 2012, Proceedings of the 1st International Conference on Ingot Casting, Rolling and Forging. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Experimental investigation into the influence of Ti on the clogging of ULC steels in continuous casting

    Bernhard, C., Xia, G., Egger, M., Pissenberger, A. & Michelic, S., 2012, Proceedings of the AISTech 2012. p. 2191-2200

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Experimental study on the influence of the Ti/Al ratio and different addition practices on the inclusion landscape in ULC steels

    Michelic, S., Xia, G. & Bernhard, C., 2012, Proceedings of the ASIA Steel International Conference 2012. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Inclusion Metallurgy

    Michelic, S., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. 2011
  21. Published

    Automated SEM/EDX Particle Analysis to Determinate Non-Metallic Inclusions in Steel Samples

    Reischl, M., Frank, G., Martinez, C., Aigner, S., Lederhaas, B. & Michelic, S., 2011, In: Practical metallography = Praktische Metallographie. 12, p. 643-659

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Extraktion als Werkzeug zur dreidimensionalen Einschlusscharakterisierung

    Lederhaas, B. & Michelic, S., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    Interactions of non-metallic inclusions with steel and slag: Thermodynamic modeling, experiments and metallographic analyses

    Michelic, S., Hartl, M. & Bernhard, C., 2011, EPD Congress 2011. p. 723-730

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Modification of non-metallic inclusions in the ESR process by steel-slag interaction: Thermodynamic and experimental considerations

    Michelic, S., Tanzer, R., Schützenhöfer, W. & Bernhard, C., 2011, Proceedings of the 2011 International Symposium on Liquid Metal Processing and Casting. p. 81-88

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Modification of Oxide Inclusions due to Steel-Slag Interactions with Special Focus on the Electroslag Remelting Process

    Michelic, S. K., 2011, 174 p.

    Research output: Thesis › Doctoral Thesis

  26. Published

    On the Representativeness of Automated SEM/EDS Analyses for Inclusion Characterisation with Special Regard to the Measured Sample Area

    Michelic, S., Wieser, G. & Bernhard, C., 2011, In: ISIJ international. 51, p. 769-775

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Thermodynamic and Experimental Study on the Modification of Nonmetallic Inclusions Through the Contact with CaO-Al2O3-MgO Slags

    Michelic, S., Bernhard, C. & Hartl, M., 2011, AIST Proceedings 2011. p. 617-626

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. 2010
  29. Published

    Automatisierte REM/EDX Partikelanalyse zur Bestimmung von nichtmetallischen Einschlüssen in Stahlproben - Ringversuch zur Vergleichbarkeit der Ergebnisse an unterschiedlichen Messsystemen

    Reischl, M., Martinez, C., Aigner, S., Lederhaas, B. & Michelic, S., 2010, Automatisierte REM/EDX Partikelanalyse zur Bestimmung von nichtmetallischen Einschlüssen in Stahlproben - Ringversuch zur Vergleichbarkeit der Ergebnisse an unterschiedlichen Messsystemen. Werkstoff-Informationsges., p. 365-370

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Kombinierter Einsatz analytischer und statistischer Methoden zur quantitativen und qualitativen Bestimmung des Reinheitsgrads von Stählen

    Michelic, S., Hartl, M., Wieser, G. & Bernhard, C., 2010, Kombinierter Einsatz analytischer und statistischer Methoden zur quantitativen und qualitativen Bestimmung des Reinheitsgrads von Stählen. Werkstoff-Informationsges., p. 359-364

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Thermodynamic Description of the System Steel-Slag-Inclusion for Different Metallurgical Processes using FactSage

    Michelic, S., Hartl, M. & Bernhard, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. 2009
  33. Published

    Metallurgische Herausforderungen neuer Legierungskonzepte am Beispiel von Induced Plasticity (IP)-Stählen

    Wiener, J., Gigacher, G., Penz, S. & Bernhard, C., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 154, p. 33-39

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Reinheitsgrad beim ESU-Prozess

    Michelic, S., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. 2008
  36. Published

    Analyse der Einschlusslandschaft von hochlegierten Stählen vor und nach dem Umschmelzen - Zwischenbericht

    Penz, S., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  37. Published

    Characterisation of Nonmetallic Inclusions by Automated SEM/EDX Analyses

    Penz, S., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Improvement of the Characterisation of Nonmetallic Inclusions Especially Focusing on High Purity Steels

    Penz, S., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  39. Published

    Reaktionsorte und Abscheidungsmechanismen nichtmetallischer Einschlüsse beim ESU-Verfahren

    Penz, S., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  40. Published

    Representativeness of Automated SEM/EDX Analyses for Inclusion Characterisation

    Penz, S., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. 2007
  42. Published

    Improvement of the Characterisation of Nonmetallic Inclusions Especially Focusing on High Purity Steels for Aeronautic Applications

    Penz, S. K., 2007, 103 p.

    Research output: Thesis › Master's Thesis

  43. Published

    Prediction of Inclusion Types for different Production Routes of Stainless Steels

    Penz, S., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1 2 Next
View graph of relations

Contact

Phone: 2200

Latest Research Output

View more (135)