Steffen Stelzer

(Former)

1 - 50 out of 74Page size: 50

Research output

  1. 2018
  2. Published

    Influence of processing parameters on quality factors of one-shot hybrid structures made by RTM

    Hergan, P., Beter, J., Stelzer, S., Fauster, E. & Schledjewski, R., 21 Feb 2018, In: Production Engineering : research and development. 12.2018, 2, p. 185-194 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2017
  4. Published

    Examining the application of the Hartman-Schijve equation to the analysis of cyclic fatigue fracture of polymer-matrix composites

    Brunner, A. J., Stelzer, S., Mujtaba, A. & Jones, R., 1 Dec 2017, In: Theoretical and Applied Fracture Mechanics. 92.2017, December, p. 420-425 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    INFLUENCE OF PROCESSING TEMPERATURES ON THE DEFLECTION OF HYBRID-METAL-CARBON COMPOSITES MADE BY RESIN TRANSFER MOULDING

    Hergan, P., Beter, J., Stelzer, S., Fauster, E. & Schledjewski, R., 25 Aug 2017, Proceedings of the 21st International Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding

    Fauster, E., Hergan, P., Stelzer, S., Scheiblhofer, S., Cespedes-Gonzales, G., Pfeifer, S., Rittenschober, B., Sieberer, M., Lauermann, M. & Schledjewski, R., 7 Jul 2017.

    Research output: Contribution to conference › Paper › peer-review

  7. Published

    Hybride Verbundwerkstoffe: Potenziale und Herausforderungen

    Hergan, P., Fauster, E., Stelzer, S., Pinter, G. & Schledjewski, R., 24 Mar 2017.

    Research output: Contribution to conference › Abstract › peer-review

  8. Published

    Delamination properties of hybrid steel- carbon composite materials produced via resin transfer molding

    Stelzer, S., Brandstetter, D., Hergan, P., Fauster, E. & Pinter, G. G., 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  9. Published

    Thoughts on the scatter seen in cyclic Mode I fatigue delamination growth in DCB tests

    Mujtaba, A., Stelzer, S., Brunner, A. J. & Jones, R., 2017, In: Composite structures. 160.2017, 15 January, p. 1329-1338 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. 2016
  11. Published

    Damage evolution in glass fibre reinforced composites

    Stelzer, S., Rieser, R. & Pinter, G., 29 Jun 2016.

    Research output: Contribution to conference › Presentation › Research

  12. Published

    Damage evolution in glass fibre reinforced composites

    Stelzer, S., Rieser, R. & Pinter, G., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials. 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Cyclic fatigue delamination of carbon fiber-reinforced polymer-matrix composites: Data analysis and design considerations

    Brunner, A. J., Stelzer, S., Pinter, G. G. & Terrasi, G. P., Feb 2016, In: International Journal of Fatigue. 83.2016, Part 2, February, p. 293-299 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Influence of cyclic stress intensity threshold on the scatter seen in cyclic Mode I fatigue delamination growth in DCB tests

    Mujtaba, A., Stelzer, S., Brunner, A. & Jones, R., 2016, In: Composite structures.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Modified Hartman-Schijve fitting of mode I delamination fatigue data and the resulting variation in threshold values Gthr

    Brunner, A., Mujtaba, A., Stelzer, S. & Jones, R., 2016, Procedia Structural Integrity. 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  16. Published

    Strength and damage tolerance of composite–composite joints with steel and titanium through the thickness reinforcements

    Stelzer, S., Ucsnik, S. & Pinter, G., 2016, In: Composites Part A: Applied Science and Manufacturing. 88, p. 39–47

    Research output: Contribution to journal › Article › Research › peer-review

  17. 2015
  18. Published

    Mode I, Mode II and Fixed Ratio Mixed Mode I/II Fatigue Delamination of Different Carbon Fibre Reinforced Composite Laminates

    Stelzer, S., Brunner, A. & Pinter, G., 22 Jul 2015.

    Research output: Contribution to conference › Presentation › Research

  19. Published

    Fatigue behaviour of composite-composite joints reinforced with cold metal transfer welded pins

    Stelzer, S., Ucsnik, S. & Pinter, G., 16 Jul 2015, In: International Journal of Fatigue. 81.2015, December, p. 37-47 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Fatigue delamination growth in CFRP composites: Fixed Ratio Mixed Mode I/II compared with Mode I and Mode II

    Stelzer, S., Pinter, G., Brunner, A. & Terrasi, G. P., 1 Jul 2015.

    Research output: Contribution to conference › Poster › Research

  21. Published

    Composite-Composite Joining with through the Thickness Reinforcements for Enhanced Damage Tolerance

    Stelzer, S., Ucsnik, S. & Pinter, G. G., Jul 2015, Materials Science Forum. Vol. 825-826.2015. p. 883-890 10 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  22. Published

    Mode I, Mode II and Fixed Ratio Mixed Mode I/II fatigue delamination of different carbon fiber reinforced composite laminates

    Stelzer, S., Brunner, A. & Pinter, G., Jul 2015, Proceedings of the 20th International Conference on Composite Materials. Coopenhagen, 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Simulation von Delamination in Mehrschichtverbunden

    Fuchs, P., Stelzer, S., Fellner, K., Pothukuchi, H. K. R. & Pinter, G., 5 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  24. Published

    Thoughts on accounting for the scatter seen in delamination growth

    Jones, R., Mujtaba, A., Kinloch, A., Brunner, A. & Stelzer, S., 23 Feb 2015.

    Research output: Contribution to conference › Presentation › Research

  25. Published

    Fatigue Delamination Growth in CFRP Composites: From Pure Mode I and Mode II to Mixed Mode I/II

    Stelzer, S. & Pinter, G., 2015, Materials Science Forum. Vol. 825-826.2015. p. 914-921 9 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  26. Published

    Mechanical and Thermal Characterisation of Epoxy Insulation with Inorganic Fillers

    Pothukuchi, H. K. R., Fuchs, P. & Stelzer, S., 2015.

    Research output: Contribution to conference › Poster › Research

  27. Published

    Mode I, Mode II and fixed ratio mixed I/II fatigue delamination of different carbon fiber reinforced composite laminates

    Stelzer, S., Brunner, A. J. & Pinter, G., 2015.

    Research output: Contribution to conference › Paper › peer-review

  28. Published

    Novel composite-composite joining technology with through thickness reinforcement for enhanced damage tolerance

    Stelzer, S., Ucsnik, S. & Pinter, G., 2015.

    Research output: Contribution to conference › Presentation › Research

  29. Published

    Software-basierte Methode zur Lebensdauerabschätzung endlosfaserverstärkter Kunststoffe

    Maier, J., Gaier, C., Stelzer, S. & Pinter, G., 2015.

    Research output: Contribution to conference › Presentation › Research

  30. 2014
  31. Published

    Composite to composite joint with lightweight metal reinforcement for enhanced damage tolerance

    Ucsnik, S., Stelzer, S., Sehrschön, H. & Sieglhuber, G., 25 Jun 2014.

    Research output: Contribution to conference › Presentation › Research

  32. Published

    Determination of input parameters for a mix-mode cohesive zone formulation of a novel metal-CFRP-joining interface

    Kronsteiner, J., Ucsnik, S. & Stelzer, S., 25 Jun 2014.

    Research output: Contribution to conference › Presentation › Research

  33. Published

    Fatigue behavior of through the thickness reinforced joints

    Stelzer, S., Ucsnik, S., Sehrschön, H., Tauchner, J. & Pinter, G., 22 Jun 2014.

    Research output: Contribution to conference › Presentation › Research

  34. Published

    Comparison of quasi-static and cyclic fatigue delamination resistance of CFRP under different mode loading

    Stelzer, S., 2014, Proceedia Materials Science. p. 000-000

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Composite to composite joint with lightweight metal reinforcement for enhanced damage tolerance

    Ucsnik, S., Stelzer, S., Sehrschön, H. & Sieglhuber, G., 2014, Composite to composite joint with lightweight metal reinforcement for enhanced damage tolerance. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Determination of input parameters for a mix-mode cohesive zone formulation in a novel metal-CFRP-joining interface

    Kronsteiner, J., Ucsnik, S. & Stelzer, S., 2014, Proceedings of ECCM16. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Fatigue behavior of through the thickness reinforced joints

    Stelzer, S., Ucsnik, S., Sehrschön, H., Tauchner, J. & Pinter, G., 2014, Fatigue behavior of through the thickness reinforced joints. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Fatigue delamination growth in CFRP composites: Fixed Ratio Mixed Mode I/II compared with Mode I and Mode II

    Stelzer, S., Pinter, G., Brunner, A. & Terrasi, G. P., 2014.

    Research output: Contribution to conference › Poster › Research

  39. Published

    Mode I delamination fatigue crack growth in unidirectional fiber reinforced composites: Results from ESIS TC4 round-robins

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N., Cano, G. M. & Pinter, G., 2014, In: Engineering Fracture Mechanics. 116, p. 92-107

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Mode I, mode II and mixed mode I/II delamination growth in composites

    Jones, R., Stelzer, S. & Brunner, A., 2014, In: Composite structures. 110, p. 317-324

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Optimized experimental methods for the description of the delamination and failure behavior of high performance composites and joints

    Stelzer, S., 2014

    Research output: Thesis › Doctoral Thesis

  42. Published

    Stiffness based fatigue characterisation of CFRP

    Brunbauer, J., Arbeiter, F., Stelzer, S. & Pinter, G., 2014, In: Advanced materials research. p. 166-171

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Stiffness based fatigue characterisation of CFRP

    Maier, J., Arbeiter, F., Stelzer, S. & Pinter, G., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  44. Published

    Zugversuche an Förderbändern aus kohlenstofffaserverstärktem PEEK

    Stelzer, S. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  45. 2013
  46. Published

    Interlaminar fatigue crack growth in carbon fiber reinforced composites

    Stelzer, S., Jones, R. & Brunner, A., 30 Jul 2013.

    Research output: Contribution to conference › Presentation › Research

  47. Published

    Novel composite-composite joining technology with through the thickness reinforcement for enhanced damage tolerance

    Stelzer, S., Ucsnik, S., Tauchner, J., Unger, T. & Pinter, G., 29 Jul 2013.

    Research output: Contribution to conference › Presentation › Research

  48. Published

    Novel composite-composite joining technology with through thickness reinforcement for enhanced damage tolerance

    Stelzer, S., Ucsnik, S., Tauchner, J., Unger, T. & Pinter, G., 1 Jan 2013, p. 4645-4653. 9 p.

    Research output: Contribution to conference › Paper › peer-review

  49. Published

    Interlaminar fatigue crack growth in carbon fiber reinforced composites

    Stelzer, S., 2013, Proceedings of the 19th International Conference on Composite Materials. p. 1689-1697

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Mode II fatigue delamination resistance of advanced fiber-reinforced polymer–matrix laminates: Towards the development of a standardized test procedure

    Brunner, A., Stelzer, S., Pinter, G. & Terrasi, G. P., 2013, In: International Journal of Fatigue. 50, p. 57-62

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Novel composite-composite joining technology with through the thickness reinforcement for enhanced damage tolerance

    Stelzer, S., 2013, Proceedings of the 19th International Conference on Composite Materials. p. 4645-4653

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Zyklische Prüfung von Rohrverbindungen

    Stelzer, S. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  53. 2012
  54. Published

    Delamination Fatigue Testing of Continuous Fiber Composites

    Brunner, A. & Stelzer, S., 28 May 2012.

    Research output: Contribution to conference › Presentation › Research

  55. Published

    Influence of fiber placement and architecture on fracture mechanical properties of carbon fiber reinforced composites

    Stelzer, S., Schillfahrt, C., Wolfahrt, M., Pinter, G., Noisternig, J. & Frieß, S., 24 May 2012.

    Research output: Contribution to conference › Presentation › Research

  56. Published

    Towards a standardized test method for mode I fatigue crack growth in unidirectional fiber reinforced polymer composites

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N. & Pinter, G., 19 Apr 2012.

    Research output: Contribution to conference › Presentation › Research

  57. Published

    Towards a standardized test method for mode I fatigue crack growth in unidirectional fiber reinforced polymer composites

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N. & Pinter, G., 18 Apr 2012, Proc. 3rd Fatigue Symposium, Leoben, Austria.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 Next
View graph of relations

Curriculum vitae

Steffen Stelzer Öffentliches Curriculum

Latest Research Output

View more (74)