Sophie Primig

(Former)

51 - 96 out of 96Page size: 50

Research output

  1. 2014
  2. Published

    Early stages of precipitation: Experiments and Modelling

    Primig, S., Leitner, H. & Kozeschnik, E., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 5-11

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    EBSD study of the microstructural evolution during hot compression testing of a superduplex steel

    Primig, S., Ragger, K. & Buchmayr, B., 2014, EBSD study of the microstructural evolution during hot compression testing of a superduplex stee. p. 973-979

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    EBSD Untersuchungen an warmumgeformtem Superduplexstahl

    Primig, S., Ragger, K. & Buchmayr, B., 2014, 14. Int. Metallographie-Tagung. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    EBSD Untersuchungen von warmumgeformten Superduplexstahl

    Primig, S., Ragger, K., Clemens, H. & Buchmayr, B., 2014, Sonderbände der Praktischen Metallographie 46. p. 107-112

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Einfluss der Mikrolegierung (Nb, Al, N) auf die Feinkornbeständigkeit von Einsatzstählen vom Typ 18CrNiMo7-6

    Zacharias, H., Arndt, J. & Primig, S., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 296-297

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Einfluss der Mikrolegierung (Nb, Al, N) auf die Feinkornbeständigkeit von Einsatzstählen vom Typ 18CrNiMo7-6

    Zacharias, H., Arndt, J. & Primig, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  8. Published

    Einfluss der Präparationstechnik bei der Bestimmung des µ-Phasenanteils in einer Fe-25Co-15Mo Legierung mittels XRD

    Turk, C., Kellezi, G., Leitner, H., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 101-106

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Einfluss der Präparationstechnik bei der Bestimmung des µ-Phasenanteils in einer Fe-25Co-15Mo Legierung mittels XRD

    Turk, C., Kellezi, G., Leitner, H., Clemens, H. & Primig, S., 2014, p. 101-106.

    Research output: Contribution to conference › Presentation › Research › peer-review

  10. Published

    Elektrolytisches Polieren vs. Vibrationspolieren: Entwicklung einer Präparationsmethode zur EBSD-Analyse der Mo-Basislegierung MHC

    Lang, D., Schatte, J., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 59-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Evolution of precipitates and martensitic substructure during continuous heat treatment

    Mayer, W., Sackl, S. C., Shan, Y. V., Primig, S. & Kozeschnik, E., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    High Performance Materials

    Clemens, H., Primig, S., Mendez Martin, F., Babinsky, K., Hofer, C., Lang, D., Sackl, S. C., Turk, C. & Weißensteiner, I., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    Induction hardening vs conventional hardening of a heat treatable steel

    Sackl, S. C., Leitner, H., Zuber, M., Clemens, H. & Primig, S., 2014, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45A, p. 5657-5666

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Influence of deformation on the precipitation behavior of Nb (CN) in austenite and ferrite

    Nöhrer, M., Mayer, W., Primig, S., Zamberger, S., Kozeschnik, E. & Leitner, H., 2014, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45 A, p. 4210-4219

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Neue Ansätze zur Zielpräparation von Atomsondenspitzen mittels Focused Ion Beam und Durchstrahlungs-EBSD

    Babinsky, K., Haslberger, P., Turk, C., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 361-366

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Neue Ansätze zur Zielpräparation von Atomsondenspitzen mittels Focused Ion Beam und Durchstrahlungs-EBSD

    Babinsky, K., Haslberger, P., Turk, C., Clemens, H. & Primig, S., 2014, p. 361-366.

    Research output: Contribution to conference › Presentation › Research › peer-review

  17. Published

    New findings on the atomistic mechanisms active during mechanical milling of a Fe-Y2O3 model alloy

    Ressel, G., Parz, P., Primig, S., Leitner, H., Clemens, H. & Puff, W., 2014, In: Journal of applied physics. 115, p. 1243131-1243137

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    On the behavior of yttria/yttrium during mechanical alloying of a Fe-Y2O3 model alloy system

    Ressel, G., Parz, P., Fian, A., Holec, D., Primig, S., Puff, W., Leitner, H. & Clemens, H., 2014, Advanced Materials Research. p. 598-603

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    On the precipitation mechanism in the molybdenum based alloy MHC (mo-HF-C)

    Lang, D., Pöhl, C., Schatte, J., Primig, S. & Leitner, H., 2014, In: Powder metallurgy progress. 57, p. 311-313

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Origin of high temperature oxidation resistance of Ti-Al-Ta-N coatings

    Hollerweger, R., Riedl, H., Paulitsch, J., Arndt, M., Rachbauer, R., Polcik, P., Primig, S. & Mayrhofer, P. H., 2014, In: Surface & coatings technology. 257, p. 78-86

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Präparation von karbidfreien bainitischen Stählen für EBSD-Untersuchungen

    Hofer, C., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 71-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Präparation von karbidfreien bainitischen Stählen für EBSD-Untersuchungen

    Hofer, C., Clemens, H. & Primig, S., 2014, p. 71-76.

    Research output: Contribution to conference › Presentation › Research › peer-review

  23. Published

    The effect of Zr incorporation caused by ball abrasion in a milled Fe-Y2O3 model alloy

    Ressel, G., Primig, S. & Leitner, H., 2014, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45, p. 1552-1558

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Untersuchung des Selbstanlasseffektes von Martensit mit Hilfe von Atomsondentomographie

    Sackl, S. C., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 209-214

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Widmannstätten austenite formation in a superduplex steel

    Primig, S. & Clemens, H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. 2013
  27. Published

    Atom probe study of vanadium interphase precipitates and randomly distributed vanadium precipitates in ferrite

    Nöhrer, M., Zamberger, S., Primig, S. & Leitner, H., 2013, In: Micron. 54-55, p. 57-64

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Comparison the carbon distribution in continuously and conventionally hardened martensite in a 42CrMo4

    Sackl, S. C., Zuber, M., Primig, S. & Leitner, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Grain boundary segregations in technically pure molybdenum

    Babinsky, K., Primig, S., Knabl, W., Lorich, A., Weingärtner, T., Weidow, J. & Leitner, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    On the behavior of yttria/yttrium during mechanical alloying of a Fe-Y2O3 model alloy system

    Ressel, G., Parz, P., Fian, A., Holec, D., Primig, S., Puff, W., Leitner, H. & Clemens, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Phase characterization of multi-phase advanced high strength steels

    Hofer, C., Primig, S., Pichler, A., Krammerbauer, J. & Leitner, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    The evolution of Y distribution during the processing route of mechnically alloyed iron studied by means of atom probe tomography

    Ressel, G., Primig, S. & Leitner, H., 2013, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 104, p. 1088-1095

    Research output: Contribution to journal › Article › Research › peer-review

  33. 2012
  34. Published

    Influence of the heating rate on the recrystallization behavior of molybdenum

    Primig, S., Leitner, H., Knabl, W., Lorich, A., Clemens, H. & Stickler, R., 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 535, p. 316-324

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Recovery and recrystallization behavior of technically pure molybdenum

    Primig, S., 2012, 138 p.

    Research output: Thesis › Doctoral Thesis

  36. Published

    Static recrystallization of molybdenum after deformation below 0.5TM(K)

    Primig, S., Leitner, H., Knabl, W., Lorich, A. & Stickler, R., 2012, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 43, p. 4806-4818

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Textural evolution during dynamic recovery and static recrystallization of molybdenum

    Primig, S., Leitner, H., Knabl, W., Lorich, A., Clemens, H. & Stickler, R., 2012, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 43, p. 4794-4805

    Research output: Contribution to journal › Article › Research › peer-review

  38. 2011
  39. Published

    SEM and TEM Investigations of Recovery and Recrystallization in Technically Pure Molybdenum

    Primig, S., Leitner, H., Lorich, A., Knabl, W., Clemens, H. & Stickler, R., 2011, In: Practical metallography = Praktische Metallographie. p. 344-355

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Separation of overlapping retained austenite decomposition and cementite precipitation reactions during tempering of martensitic steel by means of thermal analysis

    Primig, S. & Leitner, H., 2011, In: Thermochimica Acta. p. 111-117

    Research output: Contribution to journal › Article › Research › peer-review

  41. 2010
  42. Published

    Erholungs- und Rekristallisationsverhalten von technisch reinem Molybdän

    Primig, S., Leitner, H., Clemens, H., Stickler, R., Lorich, A., Knabl, W. & Köck, W., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. 155, p. 20-25

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Magnetic-field-dependent small-angle neutron scattering on steels

    Zickler, G., Michels, A., Primig, S., Schweins, R. & Leitner, H., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    On the recrystallization behavior of technically pure molybdenum

    Primig, S., Leitner, H., Clemens, H., Lorich, A., Knabl, W. & Stickler, R., 2010, In: International journal of refractory metals & hard materials. p. 703-708

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    SEM and TEM investigations of recovery and recrystallization in Technically pure Molybdenum

    Primig, S., Leitner, H., Lorich, A., Knabl, W., Clemens, H. & Stickler, R., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 289-294

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    The influence of aging treatments on the precipitation behavior in the nickel-based superalloy 718Plus

    Zickler, G., Primig, S., Lerchbacher, C., Nöhrer, M., Leitner, H. & Eckerlebe, H., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Transformation from continuous to isothermal aging applied on a maraging steel

    Primig, S. & Leitner, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Transformation from continuous-to-isothermal aging applied on a maraging steel

    Primig, S. & Leitner, H., 2010, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, p. 4399-4405

    Research output: Contribution to journal › Article › Research › peer-review

  49. 2009
  50. Published

    Characterisation of precipitates in a maraging steel

    Zickler, G., Primig, S., Leitner, H., Sharp, M. & Eckerlebe, H., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    On the Recrystallization Behavior of Technically Pure Molybdenum

    Primig, S., Leitner, H., Rodriguez Chavez, A., Clemens, H., Lorich, A., Knabl, W. & Stickler, R., 2009, proc. in 17 th Plansee Seminar. p. 15/1-15/9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. 2008
  53. Published

    Einfluss des Mikrogefüges auf die Maßänderung von HSS Legierungen während der Wärmebehandlung

    Primig, S., 2008

    Research output: Thesis › Diploma Thesis

Previous 1 2 Next
View graph of relations

Latest Research Output

View more (96)