Shengli Jin

(Former)

1 - 50 out of 158Page size: 50

Research output

  1. 2024
  2. Published

    Fracture process zone modelling of a magnesia spinel refractory using phase field fracture model

    Ali, Z., Jin, S. & Gruber, D., 15 Nov 2024, In: Finite elements in analysis and design. 242.2024, December, 12 p., 104279.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Coupled CFD-DEM Simulation of Flow-Induced Erosion in Cohesive Materials

    Vollmann, S., Rahimilarki, M. & Jin, S., Sept 2024.

    Research output: Contribution to conference › Abstract › peer-review

  4. Published

    Flow-induced erosion modelling of cohesive material with coupled CFD-DEM approach

    Rahimilarki, M., Vollmann, S. & Jin, S., 27 Aug 2024, In: Minerals engineering. 217.024, October, 15 p., 108947.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Brittleness reduction of low-carbon Al2O3-C refractories with in-situ formation MgAl2O4/CNTs layer between aggregate and matrix

    Luo, J., Jin, S., Chong, X., Ding, D. & Xiao, G., Apr 2024, In: Journal of the European Ceramic Society. 44.2024, 4, p. 2620-2629 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Determination of the influence of particle spatial distribution and interface heterogeneity on tensile fracture of ordinary refractory ceramics by applying discrete element modelling

    Du, W., Jin, S. & Gruber, D., 21 Mar 2024, In: Computational particle mechanics. 11.2024, 5, p. 1887-1901 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Finite element modelling of refractories fracture process zone with gradient enhanced damage models

    Ali, Z., Jin, S. & Gruber, D., 21 Mar 2024, In: Finite elements in analysis and design. 234.2024, July, 15 p., 104151.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Steel Ladle Slag Zone Lining Optimization Considering Irreversible Material Behavior

    Klopf, M., Hou, A., Jin, S. & Gruber, D., 13 Mar 2024, In: Steel research international. 95.2024, 7, 10 p., 2300557.

    Research output: Contribution to journal › Article › Research › peer-review

  9. 2023
  10. Published

    Large mechanical properties enhancement in ceramics through vacancy-mediated unit cell disturbance

    Chen, Z., Huang, Y., Koutná, N., Gao, Z., Sangiovanni, D., Fellner, S., Haberfehlner, G., Jin, S., Mayrhofer, P. H., Kothleitner, G. & Zhang, Z., 16 Dec 2023, In: Nature Communications. 14.2023, 1, 11 p., 8387.

    Research output: Contribution to journal › Article › Research › peer-review

  11. E-pub ahead of print

    Morphology characterization for refractory aggregates

    Wu, M. & Jin, S., 14 Jul 2023, (E-pub ahead of print) In: Open ceramics. 15.2023, September, 7 p., 100408.

    Research output: Contribution to journal › Article › Research › peer-review

  12. E-pub ahead of print

    Nanoscale toughening of low carbon Al2O3-C refractories by means of SiCnw/Al2O3 composite reinforcement

    Chong, X., Luo, J., Ding, D., Jin, S. & Xiao, G., 9 Jun 2023, (E-pub ahead of print) In: Journal of the American Ceramic Society. 106.2023, 11, p. 6891-6910 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. E-pub ahead of print

    Creep strain recovery of an in situ spinel-forming refractory castable under loading/unloading compressive creep conditions

    Akbari, B., Gruber, D., Jin, S. & Harmuth, H., 17 May 2023, (E-pub ahead of print) In: Ceramics International. 49.2023, 15, p. 25225-25231 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. 2022
  15. E-pub ahead of print

    Thermal expansion and Young's modulus evolution of fused silica and crystalline silica-containing materials

    Yin, Y., Jin, S., Zhu, Q., Dai, Y., Li, Y. & Xia, Z., 30 Nov 2022, (E-pub ahead of print) In: International journal of applied ceramic technology. 20.2023, 3, p. 1875-1886 12 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  16. Published

    Discrete Element Modelling of Cold Crushing Tests Considering Various Interface Property Distributions in Ordinary Refractory Ceramics

    Du, W. & Jin, S., 31 Oct 2022, In: Materials. 15.2022, 21, 18 p., 7650.

    Research output: Contribution to journal › Article › Research › peer-review

  17. E-pub ahead of print

    Multi-Response Optimization of the Thermal and Thermomechanical Behavior of a Steel Ladle Lining using Grey Relational Analysis and Technique for Order Preference by Similarity to Ideal Solution

    Hou, A., Gruber, D. & Jin, S., 23 Sept 2022, (E-pub ahead of print) In: Steel research international. 94.2023, 1, 10 p., 2200407.

    Research output: Contribution to journal › Article › Research › peer-review

  18. E-pub ahead of print

    Effect of microporous aggregates and spinel powder on fracture behavior of magnesia-based refractories

    Yan, J., Dai, Y., Yan, W., Jin, S., Wang, X. & Li, Y., 13 Sept 2022, (E-pub ahead of print) In: Journal of the European Ceramic Society. 42.2022, 16, p. 7648-7655 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Image-processing-based automatic crack detection and classification for refractory evaluation

    Wang, G., Tan, F., Jin, S., Pan, L., He, Z., Wang, X., Li, Y. & Li, J., 15 Aug 2022, In: Ceramics International. 48.2022, 16, p. 23232-23240 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Creep characterization and modelling of ordinary refractory ceramics under combined compression and shear loading conditions

    Schachner, S., Jin, S., Gruber, D. & Harmuth, H., 1 Aug 2022, In: Ceramics International. 48.2022, 15, p. 21101-21109 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Mixed-mode fracture behaviour of refractories with asymmetric wedge splitting test: Part II: Experimental case study

    Dai, Y. J., Jin, S., Zhou, R., Li, Y. W., Harmuth, H. & Tschegg, E. K., 15 Jul 2022, In: Ceramics International. 48.2022, 14, p. 19757-19766 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Mixed-mode fracture behaviour of refractories with asymmetric wedge splitting test: Part I: Numerical implementation and validation

    Dai, Y., Jin, S., Li, Y. W., Wang, Q., Zhou, W. & Harmuth, H., 15 Jul 2022, In: Ceramics International. 48.2022, 14, p. 19767-19775 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Corrigendum to “Asymmetric creep modeling of common refractory ceramics with high temperature wedge splitting test” [Eng. Fract. Mech. 25 (2021) 107819

    Jin, S. & Harmuth, H., Jul 2022, 1 p.

    Research output: Other contribution › Research

  24. Published

    Discrete element modelling of ordinary refractory ceramics under cold crushing testing: Influence of minimum element size

    Du, W., Jin, S., Emam, S., Gruber, D. & Harmuth, H., 15 Jun 2022, In: Ceramics International. 48.2022, 12, p. 17934-17941 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. E-pub ahead of print

    Thermomechanical finite element modeling of steel ladle containing alumina spinel refractory lining

    Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 1 Apr 2022, (E-pub ahead of print) In: Finite elements in analysis and design. 206.2022, 1 September, 10 p., 103762.

    Research output: Contribution to journal › Article › Research › peer-review

  26. E-pub ahead of print

    Numerical study of creep effect on purging plug performance under cyclic service

    Tan, F. G., Jin, S. L., He, Z., Liang, X., Li, Y. W. & Li, J., 25 Feb 2022, (E-pub ahead of print) In: Journal of iron and steel research international. 2022, 25 February, 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Investigation of three-stage compressive creep of a spinel forming refractory castable containing 8% MgO

    Akbari, B., Gruber, D., Jin, S. & Harmuth, H., 1 Feb 2022, In: Ceramics International : CI. 48.2022, 3, p. 3287-3292 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. E-pub ahead of print

    Automatic Detection of Slag Eye Area Based on a Hue-Saturation-Value Image Segmentation Algorithm

    Wang, G., Tan, F., Jin, S., He, Z., Li, Y. & Li, J., 7 Jan 2022, (E-pub ahead of print) In: JOM. 74.2022, 8, p. 2921-2929 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Application of Artificial Neural Network to Predict the Thermal and Thermomechanical Behavior of Refractory Linings

    Hou, A., Jin, S., Gruber, D. & Harmuth, H., 2022, 2022 International Joint Conference on Neural Networks, IJCNN 2022 - Proceedings. Institute of Electrical and Electronics Engineers, (Proceedings of the International Joint Conference on Neural Networks; vol. 2022-July).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    DETERMINATION OF SECONDARY CREEP STAGE PARAMETERS OF SHAPED ALUMINA SPINEL REFRACTORY WITH AID OF GENETIC ALGORITHM

    Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 2022.

    Research output: Contribution to conference › Paper › peer-review

  31. 2021
  32. Published

    Combined damaged elasticity and creep modeling of ceramics with wedge splitting tests

    Samadi, S., Jin, S. & Harmuth, H., 15 Sept 2021, In: Ceramics International. 47.2021, 18, p. 25846-25853 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Numerical Analysis of the Irreversible Behavior of Corundum Castable Purging Plugs During Service

    Tan, F., Jin, S., He, Z. & Li, Y., 17 Aug 2021, In: JOM. 73.2021, 10, p. 2911-2919 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Asymmetric creep modeling of common refractory ceramics with high temperature wedge splitting test

    Jin, S. & Harmuth, H., Jul 2021, In: Engineering Fracture Mechanics. 252.2021, July, 12 p., 107819.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    A comparison of two damage models for inverse identification of mode I fracture parameters: Case study of a refractory ceramic

    Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 1 May 2021, In: International Journal of Mechanical Sciences. 197, 1 May, 9 p., 106345.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Numerical Investigations on Thermomechanical Behaviour of Purging Plug with Rectangular and Circular Slits

    Tan, F., He, Z., Jin, S., Wang, Q., Pan, L., Li, Y. & Li, B., 11 Apr 2021, In: ISIJ international. 61.2021, 4, p. 4-9 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    The femtosecond laser micro-processing of the field-emission tip arrays in single crystal CeB6

    Zhou, N., Zhang, W., Zhang, X., Liu, H., Liu, Q., Xiao, Y., Liu, Y., Jin, S. & Liao, N., Feb 2021, In: Vacuum. 184 , 8 p., 109929.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    In-plant observations and thermomechanical modeling of different vessel types applying an insulation layer

    Rebouillat, L. & Jin, S., 2021, AISTech 2021 - Proceedings of the Iron and Steel Technology Conference. Association for Iron and Steel Technology, AISTECH, p. 1667-1673 7 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 2021-June).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Structural optimization and design of purging plug for improving its service performance

    Tan, F. G., Jin, S. L., He, Z. & Li, Y. W., 2021, In: Journal of iron and steel research international. 29.2022, September, p. 628-635 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. 2020
  41. Published

    Experimental Investigation of the Tension and Compression Creep Behavior of Alumina-Spinel Refractories at High Temperatures

    Teixeira, L., Samadi, S., Gillibert, J., Jin, S., Sayet, T., Gruber, D. & Blond, E., 22 Sept 2020, In: Ceramics. 3.2020, 3, p. 372-383 12 p.

    Research output: Contribution to journal › Article › Transfer › peer-review

  42. Published

    Creep Parameter Determination of a Shaped Alumina Spinel Refractory Using Statistical Analysis

    Samadi, S., Teixeira, L., Jin, S., Gruber, D. & Harmuth, H., Sept 2020.

    Research output: Contribution to conference › Paper

  43. E-pub ahead of print

    R-curves determination of ordinary refractory ceramics assisted by digital image correlation method

    Dai, Y., Harmuth, H., Jin, S., Gruber, D. & Yawei, L., 20 May 2020, (E-pub ahead of print) In: Journal of the European Ceramic Society. 40.2020, 13, p. 4655-4663 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Physical Modeling Evaluation on Refining Effects of Ladle with Different Purging Plug Designs

    Tan, F., He, Z., Jin, S., Pan, L., Yawei, L. & Li, B., 25 Mar 2020, In: Steel research international. 91.2020, 6, 8 p., 1900606.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Statistical study of compressive creep parameters of an alumina spinel refractory

    Samadi, S., Jin, S., Gruber, D., Harmuth, H. & Schachner, S., 1 Mar 2020, In: Ceramics International : CI. 46.2020, 10A, p. 14662-14668 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Influence of crystallization on properties and microstructure of fused quartz bricks for hot repair of coke ovens

    Wei, W., Yonghe, L., Yucheng, Y., Shengli, J., Jianhua, N., Wei, C., Jian, Z. & Cailiao, N., Jan 2020, In: Naihuo-cailiao : shuangyuekan = Refractories. 54.2020, 1, p. 41-46 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Mechanical and fracture investigation of magnesia refractories with acoustic emission-based method

    Dai, Y., Yawei, L., Jin, S., Harmuth, H., Yan, W. & Xu, X., Jan 2020, In: Journal of the European Ceramic Society. 40.2020, 1, p. 181-191 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    In-plant observations and thermomechanical modeling of different vessel types applying an insulation layer

    Rebouillat, L. & Jin, S., 2020, Proceedings of the Iron and Steel Technology Conference, AISTech 2020. p. 2226-2232 7 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. 2019
  50. Published

    Fracture behaviour of magnesia refractory materials in tension with the Brazilian test

    Dai, Y., Li, Y., Xu, X., zhu, Q., Yan, W., Jin, S. & Harmuth, H., Dec 2019, In: Journal of the European Ceramic Society. 39.2019, 16, p. 5433-5441 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Thermomechanical Analysis of Purging Plugs by Applying Fluid–Solid Conjugate Heat Transfer Modeling

    Tan, F., He, Z., Jin, S., Cai, H., Li, B., Li, Y. & Harmuth, H., 1 Nov 2019, In: Steel research international. 90.2019, 11, 9 p., 1900213.

    Research output: Contribution to journal › Article › Research › peer-review

  52. E-pub ahead of print

    Fracture behavior of magnesia refractory materials under combined cyclic thermal shock and mechanical loading conditions

    Dai, Y., Li, Y., Jin, S., Harmuth, H. & Xu, X., 17 Oct 2019, (E-pub ahead of print) In: Journal of the American Ceramic Society. 103.2020, 3, p. 1956-1969 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    A method for steel ladle lining optimization applying thermomechanical modelling and Taguchi approaches

    Jin, S., Hou, A., Harmuth, H. & Gruber, D., 16 Oct 2019, Proceedings of UNITECR 2019: 16th Biennial Worldwide Congress. Yokohama, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Contributions to refractories creep characterisation

    Gruber, D., Jin, S., Schachner, S., Stückelschweiger, M. & Harmuth, H., 16 Oct 2019, Proceedings of UNITECR'19. Yokohama, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Contributions to refractories creep characterisation

    Gruber, D., Jin, S., Schachner, S., Stückelschweiger, M. & Harmuth, H., 16 Oct 2019.

    Research output: Contribution to conference › Presentation › Research

  56. Published

    Benefits of the addition of a structural insulation layer in the refractory lining of rotary kiln: Thermomechanical modeling and In-plant results

    Cole, D., Stover, E., Jin, S. & Rebouillat, L., 13 Oct 2019.

    Research output: Contribution to conference › Paper

Previous 1 2 3 4 Next
View graph of relations

Latest Research Output

View more (158)