Sandra Schlögl

(Former)

201 - 292 out of 292Page size: 100

Research output

  1. 2018
  2. Published

    Design von schaltbaren Polymeren - neue Konzepte für intelligente Beschichtungen

    Schlögl, S. & Radl, S., 2018, Tagungsband des 27. Leobener Kunststoff-Kolloquiums.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Modified Natural Rubber Surface with Tunable Tribological Properties

    Maroh, B., Manhart, J. C., Hausberger, A., Kern, W. & Schlögl, S., 2018.

    Research output: Contribution to conference › Poster › Research

  4. Published

    Photochemical modification of natural rubber surfaces to tune tribological properties

    Maroh, B., Manhart, J. C. & Schlögl, S., 2018, Tagungsband des 27. Leobener Kunststoff-Kolloquiums.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Photochemical modification of natural rubber surfaces to tune tribological properties

    Maroh, B., Manhart, J. C. & Schlögl, S., 2018.

    Research output: Contribution to conference › Poster › Research

  6. Published

    Photo-responsive thiol-ene networks for the design of surfaces with polarity gradient

    Rossegger, E., Radl, S., Kern, W. & Schlögl, S., 2018.

    Research output: Contribution to conference › Poster › Research

  7. Published

    Reversible Cycloadditionsreaktion von Anthracenen: Über einstellbare Materialeigenschaften, Selbstheilungsstrategien und Rissdetektion

    Radl, S., Schlögl, S., Grießer, T. & Kern, W., 2018.

    Research output: Contribution to conference › Poster › Research

  8. Published

    Reversible Cycloadditionsreaktion von Anthracenen: Über einstellbare Materialeigenschaften, Selbstheilungsstrategien und Rissdetektion

    Radl, S., Schlögl, S., Grießer, T. & Kern, W., 2018, Tagungsband des 27. Leobener Kunststoff-Kolloquiums.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Reversible switching of the adhesion in photo- and thermoresponsive elastomers

    Kaiser, S., Radl, S., Kern, W. & Schlögl, S., 2018, Tagungsband des 27. Leobener Kunststoff-Kolloquiums.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Reversible switching of the adhesion in photo- and thermoresponsive elastomers

    Kaiser, S., Radl, S., Kern, W. & Schlögl, S., 2018.

    Research output: Contribution to conference › Poster › Research

  11. Published

    Stimuli-responsive thiol-epoxy networks with photo-switchable bulk and surface properties

    Romano, A., Roppolo, I., Giebler, M., Dietliker, K., Možina, Š., Šket, P., Mühlbacher, I., Schlögl, S. & Sangermano, M., 2018, In: RSC Advances. 73.2018, 8

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Study of photocleavable epoxy-anhydride networks using photosensitive o-nitrobenzyl ester links

    Giebler, M., Radl, S., Ast, M., Grießer, T., Kern, W. & Schlögl, S., 2018, Tagungsband des 27. Leobener Kunststoff-Kolloquiums, 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Study of photocleavable epoxy-anhydride networks using photosensitive o-nitrobenzylester links

    Giebler, M., Radl, S., Ast, M., Grießer, T., Kern, W. & Schlögl, S., 2018.

    Research output: Contribution to conference › Poster › Research

  14. Published

    Switching "on" and "off" the adhesion in stimuli-responsive elastomers

    Kaiser, S., Radl, S. V., Manhart, J., Ayalur-Karunakaran, S., Griesser, T., Moser, A., Ganser, C., Teichert, C., Kern, W. & Schlögl, S., 2018, In: Soft Matter. 14, 13, p. 2547-2559 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Synthesis and Applications of Stimuli-Responsive Elastomers

    Schlögl, S., Radl, S., Grießer, T. & Kern, W., 2018, Tagungsband Deutsche Kautschuktagung 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Verfahren zur Herstellung eines Objektes aus einem Polymer mittels 3-D-Druckes, Österreichische Patentanmeldung

    Radl, S. (Inventor) & Schlögl, S. (Inventor), 2018, Patent No. A 50535/2018, 28 Jun 2018

    Research output: Patent

  17. 2017
  18. E-pub ahead of print

    Synthesis and evaluation of new radical photoinitiators bearing trialkoxysilyl groups for surface immobilization

    Roszkowski, P., Sahin, M., Ayalur Karunakaran, S., Gammer, C., Schlögl, S., Kern, W. & Krawczyk, K., 25 Sept 2017, (E-pub ahead of print) In: Polymer. 129.2017, 27 October, p. 207-220 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    VERFAHREN ZUM HERSTELLEN EINES PROPHYLAXEARTIKELS

    Holzner, A. (Inventor), Kern, W. (Inventor), Manhart, J. C. (Inventor), Schaller, R. (Inventor) & Schlögl, S. (Inventor), 8 Sept 2017, IPC No. C08J 5/ 02 A I, Patent No. WO2017147637, Priority date 4 Mar 2016, Priority No. AT20160050173

    Research output: Patent

  20. Published

    VERFAHREN ZUM HERSTELLEN EINES PROPHYLAXEARTIKELS

    Holzner, A. (Inventor), Kern, W. (Inventor), Manhart, J. C. (Inventor), Sahin, M. (Inventor), Schaller, R. (Inventor) & Schlögl, S. (Inventor), 8 Sept 2017, IPC No. C08J 5/ 02 A I, Patent No. WO2017147638, Priority date 4 Mar 2016, Priority No. AT20160050175

    Research output: Patent

  21. Published

    VERFAHREN ZUM HERSTELLEN EINES PROPHYLAXEARTIKELS

    Holzner, A. (Inventor), Kern, W. (Inventor), Manhart, J. C. (Inventor), Sahin, M. (Inventor), Schaller, R. (Inventor) & Schlögl, S. (Inventor), 8 Sept 2017, IPC No. C08J 3/ 26 A I, Patent No. WO2017147639, Priority date 4 Mar 2016, Priority No. AT20160050176

    Research output: Patent

  22. Published

    Photo-Reversible Elastomeric Materials as Shape Memory Polymers and Reversible Adhesives

    Kaiser, S., Radl, S. V. (Co-editor), Grießer, T. (Co-editor), Kern, W. & Schlögl, S. (Co-editor), 6 Sept 2017.

    Research output: Contribution to conference › Poster › Research

  23. Published

    Study of photocleavable epoxy-anhydride networks using photosensitive o-nitrobenzyl ester links

    Giebler, M., Radl, S. V. (Co-editor), Ast, M. (Co-editor), Grießer, T., Kern, W. (Co-editor) & Schlögl, S. (Co-editor), 6 Sept 2017.

    Research output: Contribution to conference › Poster › Research

  24. Published

    Material behavior of carboxylated nitrile butadiene rubber (XNBR) in dependence on crosslinker and medium

    Fleischmann, D. D., Arbeiter, F., Schlögl, S. & Kern, W., 5 Sept 2017.

    Research output: Contribution to conference › Poster › Research

  25. Published

    Exploring photo-curable thiol-yne resins for the 3D printing of biomedical devices

    Griesser, H., Oesterreicher, A. (Co-editor), Moser, A. (Co-editor), Schlögl, S. (Co-editor), Pichelmayer, M. (Co-editor) & Grießer, T. (Co-editor), 22 Aug 2017.

    Research output: Contribution to conference › Poster › Research

  26. Published

    Light triggered formation of photo-responsive epoxy based networks

    Rinaldi, R., Radl, S. V. (Co-editor), Roppolo, I. (Co-editor), Pölzl, K. (Co-editor), Ast, M. (Co-editor), Spreitz, J. (Co-editor), Grießer, T. (Co-editor), Kern, W. (Co-editor), Schlögl, S. (Co-editor) & Sangermano, M. (Co-editor), 22 Aug 2017.

    Research output: Contribution to conference › Poster › Research

  27. Published

    Influence of Thermo-Oxidative Ageing of HNBR in Oil Field Applications

    Balasooriya, W., Schrittesser, B. C., Karunakaran, S., Schlögl, S., Pinter, G. G., Schwarz, T. & Kadar, Z., 22 Jun 2017, In: Macromolecular Symposia. 373.2017, 1, 16 p., 1600093.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Efficient initiation of radical‐mediated thiol‐ene chemistry with photoactive silica particles

    Sahin, M., Schlögl, S., Kaiser, S., Kern, W., Wang, J. & Grützmacher, H., 1 Mar 2017, In: Journal of polymer science : A, Polymer chemistry. 55.2017, 5, p. 894-902 9 p., 55.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    METHOD FOR PRODUCING A CROSSLINKED ELASTOMER

    Holzner, A. (Inventor), Kern, W. (Inventor), Schaller, R. (Inventor) & Schlögl, S. (Inventor), 15 Feb 2017, IPC No. C08G 61/ 04 A I, Patent No. MY159943, Priority date 17 Mar 2009, Priority No. AT20090000421

    Research output: Patent

  30. Published

    Photo-responsive thiol-ene networks for the design of switchable polymer patterns

    Radl, S. V., Schipfer, C., Kaiser, S., Moser, A., Kaynak, B., Kern, W. & Schlögl, S., 31 Jan 2017, In: Polymer Chemistry. 8.2017, 9, p. 1562-1572 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Functional photopolymers with permanent and reversible crosslinks: design, characterization and application

    Schlögl, S., 2017

    Research output: Thesis › Habilitation thesis › peer-review

  32. Published

    Investigating Photocurable Thiol-Yne Resins for Biomedical Materials

    Oesterreicher, A., Moser, A., Edler, M., Griesser, H., Schlögl, S., Pichelmayer, M. & Grießer, T., 2017, In: Macromolecular materials and engineering. 302.2017, 5, 9 p., 1600450.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Investigationg Photocurable Thiol-Yne Resins for Biomedical Materials

    Oesterreicher, A., Moser, A., Edler, M., Griesser, H., Schlögl, S., Pichelmayer, M. & Grießer, T., 2017

    Research output: Non-textual form › Web publication/site › Research

  34. Published

    Light triggered formation of photo-responsive epoxy based networks

    Radl, S. V., Roppolo, I., Pölzl, K., Ast, M., Spreitz, J., Grießer, T., Kern, W., Schlögl, S. & Sangermano, M., 2017, In: Polymer. 109.2017, 27 January, p. 349-357 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. 2016
  36. Published

    VERPACKUNGSELEMENT

    Brandstätter, A. (Inventor), Schlögl, S. (Inventor), Kramer, R. (Inventor) & Riess, G. (Inventor), 30 Nov 2016, IPC No. B32B 27/ 30 A I, Patent No. EP3098070, Priority date 29 May 2015, Priority No. AT20150050441

    Research output: Patent

  37. E-pub ahead of print

    Thiol-Ene versus Binary Thiol–Acrylate Chemistry: Material Properties and Network Characteristics of Photopolymers

    Sahin, M., Ayalur-Karunakaran, S., Manhart, J., Wolfahrt, M., Kern, W. & Schlögl, S., 23 Nov 2016, (E-pub ahead of print) In: Advanced engineering materials. 19.2017, 4, 10 p., 1600620.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Flexible epoxy based composites with enhanced delamination resistance

    Schlögl, S., Lenko, D., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W. & Kern, W., 31 Oct 2016, Proceedings of the Regional Conference Graz 2015 - Polymer Processing Society PPS: Conference Papers. Holzer, C. H. & Payer, M. (eds.). 080007. (AIP Conference Proceedings; vol. 1779).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    UV-induced modulation of tribological characteristics: Elastomeric materials featuring controlled anisotropic friction properties

    Manhart, J., Hausberger, A., Mühlbacher, I., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 31 Oct 2016, Proceedings of the Regional Conference Graz 2015 - Polymer Processing Society PPS: Conference Papers. Holzer, C. H. & Payer, M. (eds.). 080004. (AIP Conference Proceedings; vol. 1779).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Measurements of viscoelasticity and adhesion force of polymer materials with large radius AFM tips

    Ganser, C., Czibula, C., Manhart, J., Radl, S., Schlögl, S., Hirn, U. & Teichert, C., 28 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  41. Published

    Method for modifying the surface of an elastomer product

    Holzner, A. (Inventor), Kern, W. (Inventor), Lenko, D. (Inventor), Manhart, J. C. (Inventor), Schaller, R. (Inventor) & Schlögl, S. (Inventor), 29 Jan 2016, IPC No. C08K 9/ 04 A I, Patent No. PL2719720T, Priority date 9 Oct 2013, Priority No. EP20130187837

    Research output: Patent

  42. Published

    Advanced Materials via thiol-ene click reactions

    Sahin, M., Kern, W. & Schlögl, S., 2016.

    Research output: Contribution to conference › Poster › Research

  43. Published

    Data on synthesis and thermo-mechanical properties of stimuli-responsive rubber materials bearing pendant anthracene groups

    Manhart, J. C., Ayalur Karunakaran, S., Radl, S., Oesterreicher, A., Moser, A., Ganser, C., Teichert, C., Pinter, G. G., Kern, W., Grießer, T. & Schlögl, S., 2016, In: Data in Brief. 2016, 9, p. 524-529

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Exploring Network Formation of Tough and Biocompatible Thiol-yne Based Photopolymers

    Oesterreicher, A., Gorsche, C., Ayalur-Karunakaran, S., Moser, A., Edler, M., Pinter, G., Schlögl, S., Liska, R. & Grießer, T., 2016, In: Macromolecular rapid communications. 37

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Exploring thiol-yne based monomers as low cytotoxic building blocks for radical photopolymerization

    Oesterreicher, A., Ayalur-Karunakaran, S., Moser, A., Mostegel, F., Edler, M., Kaschnitz, P., Pinter, G., Trimmel, G., Schlögl, S. & Grießer, T., 2016, In: Journal of polymer science : A, Polymer chemistry. 54, p. 3484-3494

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Investigation of temporary binding pressure sensitive adhesives comprising external triggered release

    Christine, B., Schlögl, S., Feldbacher, S. & Kern, W., 2016.

    Research output: Contribution to conference › Poster › Research

  47. Published

    Investigation of temporary binding pressure sensitive adhesives comprising external triggered release

    Bandl, C., Schlögl, S., Feldbacher, S. & Kern, W., 2016, Proceedings of the 11th European Adhesion Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Photoreversible Crosslinking of Elastomeric Materials Comprising Spatially Resolved Switchable Characteristics

    Kaiser, S., Manhart, J. C., Ayalur Karunakaran, S., Moser, A., Oesterreicher, A., Pinter, G. G., Teichert, C., Grießer, T., Kern, W. & Schlögl, S., 2016.

    Research output: Contribution to conference › Poster › Research

  49. Published

    Properties of Polymer Composites Used in High-Voltage Applications

    Plesa, G.-I., Noţingher, P., Schlögl, S., Sumereder, C. & Muhr, M., 2016, In: Polymers. 2016, 8

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Surface Functionalization of Natural Rubber by UV‐Induced Thiol‐ene Chemistry

    Manhart, J. C., Kramer, R., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 2016, In: Macromolecular Symposia. 2016, 365

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Thiol‐Ene versus Binary Thiol–Acrylate Chemistry: Material Properties and Network Characteristics of Photopolymers

    Sahin, M., Ayalur Karunakaran, S., Manhart, J. C., Wolfahrt, M., Kern, W. & Schlögl, S., 2016, In: Advanced engineering materials. 2016, 19, 19.

    Research output: Contribution to journal › Article › Research › peer-review

  52. 2015
  53. Published

    Verfahren zur Herstellung eines epoxidbasierten Duromers und damit hergestelltes Duromer

    Griesser, T. T. (Inventor), Kern, W. M. T. (Inventor), Radl, S. (Inventor) & Schlögl, S. T. (Inventor), 15 Nov 2015, IPC No. C08G 59/ 40 A I, Patent No. AT515711, Priority date 23 Apr 2014, Priority No. AT20140050295

    Research output: Patent

  54. The influence of surface modification on the electrical properties of silicon carbide flakes

    Pleşa, I., Schlögl, S., Radl, S. V., Mühlbacher, I. & Schichler, U., 24 Jun 2015, 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015. Institute of Electrical and Electronics Engineers, p. 460-463 4 p. 7133858. (2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Photocleavable epoxy based materials

    Radl, S. V., Kreimer, M., Manhart, J., Grießer, T., Moser, A., Pinter, G., Kalinka, G., Kern, W. & Schlögl, S., 15 Jun 2015, In: Polymer. 2015, Vol.69, July, p. 159-168

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Erratum: Inhomogeneities and local chain stretching in partially swollen networks (Soft Matter (2013) 9 (6943-6954))

    Chassé, W., Schlögl, S., Riess, G. & Saalwächter, K., 7 Jun 2015, In: Soft Matter. 11, 21, p. 4337-4338 2 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  57. Published

    Erratum: Entanglement effects in elastomers: Macroscopic vs microscopic properties (Macromolecules (2014) 47:9 (2759-2773) DOI: 10.1021/ma4026064)

    Schlögl, S., Trutschel, M. L., Chassé, W., Riess, G. & Saalwächter, K., 28 Apr 2015, In: Macromolecules. 48, 8, p. 2855 1 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  58. Published

    ROHR, INSBESONDERE FERNWÄRMEROHR

    Schlögl, S. (Inventor), Riess, G. (Inventor) & Kramer, R. (Inventor), 23 Apr 2015, IPC No. F16L 59/ 14 A I, Patent No. WO2015054713, Priority date 14 Oct 2013, Priority No. AT20130050662

    Research output: Patent

  59. Published

    Chemical functionalization of composite surfaces for improved structural bonded repairs

    Jölly, I., Wolfahrt, M., Pinter, G., Fleischmann, M., Kern, W. & Schlögl, S., 2015, In: Composites Part B: Engineering. 69, p. 296-303

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Flexible Epoxy-Based Composites with Enhanced Delamination Resistance

    Schlögl, S., Lenko, D., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W. & Kern, W., 2015.

    Research output: Contribution to conference › Presentation › Research

  61. Published

    Flexible Epoxy-Based Composites with Enhanced Delamination Resistance

    Lenko, D., Schlögl, S., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W. & Kern, W., 2015, In: Polymer Composites. 36, p. 2238-2247

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    High voltage insulations with enhanced delamination resistance

    Schlögl, S. & Lenko, D., 2015, In: Rubber, fibres, plastics international. p. 260-262 4.

    Research output: Contribution to journal › Article › Research

  63. Published

    Hochspannungsisolation mit verbesserter Delaminationsbeständigkeit

    Schlögl, S. & Lenko, D., 2015, In: GAK : Gummi, Fasern, Kunststoffe. p. 108-110 2.

    Research output: Contribution to journal › Article › Research

  64. Published

    New strategies towards reversible and mendable epoxy based materials employing [4πs+4πs] photocycloaddition and thermal cycloreversion of pendant anthracene groups

    Radl, S., Kreimer, M., Grießer, T., Oesterreicher, A., Moser, A., Kern, W. & Schlögl, S., 2015, In: Polymer. p. 76-87 80.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Photo-patterned natural rubber surfaces with tunable tribological properties

    Manhart, J., Lenko, D., Mühlbacher, I., Hausberger, A., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 2015, In: European polymer journal. p. 236-246

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    UV-Induced Modulation of Tribological Characteristics: Elastomeric Materials Featuring Controlles Anisotropic Friction Properties

    Manhart, J., Hausberger, A., Mühlbacher, I., Lenko, D., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  67. 2014
  68. Published

    Elastomerprodukt mit kovalent gebundenen Partikel

    Holzner, A. (Inventor), Kern, W. (Inventor), Lenko, D. (Inventor), Manhart, J. C. (Inventor), Schaller, R. (Inventor) & Schloegl, S. (Inventor), 16 Apr 2014, IPC No. C08K 9/ 08 A I, Patent No. EP2719710, Priority date 9 Oct 2012, Priority No. AT20120001087

    Research output: Patent

  69. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014.

    Research output: Contribution to conference › Presentation › Research

  70. Published

    New approaches towards the investigation on defects and failure mechanisms of insulating composites used in high voltage applications

    Lenko, D., Schlögl, S., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W., Rosc, J. & Kern, W., 2014, In: Composites Part B: Engineering. 58, p. 83-90

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Photo-Vulcanization using thiol-ene chemistry: Film formation, morphology and network characteristics of UV crosslinked rubber latices

    Schlögl, S., Trutschel, M., Chassé, W., Letofsky-Papst, I., Schaller, R., Holzner, A., Rieß, G., Kern, W. & Saalwächter, K., 2014, In: Polymer. 55, p. 5584-5595

    Research output: Contribution to journal › Article › Research › peer-review

  72. 2013
  73. Published

    Accelerator free crosslinking of XNBR-latex using UV techniques

    Lenko, D., Schlögl, S., Schaller, R., Holzner, A. & Kern, W., 2013, Conference Proceedings: Latex and Synthetic Polymer Dispersions 2013.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Dual crosslinking of carboxylated nitrile butadiene rubber latex employing the thiol-ene photoreaction

    Schlögl, S., Kern, W., Holzner, A., Schaller, R. & Lenko, D., 2013, In: Journal of Applied Polymer Science. 129, p. 2735-2743

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Microcellular foaming with UV light – new strategies for the formation of 3D structures in offset printing techniques

    Schlögl, S., Reischl, M., Ribitsch, V. & Kern, W., 2013, The proceedings of the Austrian - Slovenian Polymer Meeting.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Oberflächenfunktionalisierte Elastomere in Epoxidharzverbunden

    Lenko, D., Schlögl, S., Bichler, S., Ladstätter, W., Ramsauer, F. & Kern, W., 2013, Tagungsband des 22. Leobener Kunststoff-Kolloquiums.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Photochemical cross-linking of poly(vinyl alcohol): New strategies towards water-developable photoresists

    Manhart, J. C., Schlögl, S., Schauberger, J. & Kern, W., 2013.

    Research output: Contribution to conference › Poster › Research

  78. Published

    Photochemical cross-linking of XNBR-latex using the thiol-ene reaction - a new approach for the manufacture of low allergenic latex gloves

    Lenko, D., Schlögl, S., Schaller, R., Holzner, A. & Kern, W., 2013, The proceedings of the Austrian - Slovenian Polymer Meeting.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    Reaktive Funktionalisierung von Elastomeroberflächen

    Schlögl, S., Lenko, D., Manhart, J. C., Schaller, R., Holzner, A. & Kern, W., 2013, Tagungsband des 22. Leobener Kunststoff-Kolloquiums.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. 2012
  81. Published

    VERFAHREN ZUR HERSTELLUNG EINES VERNETZTEN ELASTOMERS

    Holzner, A. (Inventor), Kern, W. (Inventor), Schaller, R. (Inventor), Schloegl, S. (Inventor) & Schloegl, S. (Inventor), 25 Jan 2012, IPC No. C08J 5/ 02 A I, Patent No. EP2408849, Priority date 17 Mar 2010, Priority No. WO2010AT00081

    Research output: Patent

  82. Published

    Characteristics of the photochemical prevulcanization in a falling film photoreactor

    Schlögl, S., Kern, W., Temel, A., Schaller, R. & Holzner, A., 2012, In: Journal of Applied Polymer Science. p. 3478-3486

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Contributions to the Characterization of Chlorinated Polyisoprene Surfaces

    Lenko, D., Schloegl, S., Kramer, R., Kern, W., Schaller, R. & Holzner, A., 2012, In: Macromolecular Symposia. 311, p. 9-17

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Photochemical cross-linking of XNBR latex via thiol-ene reaction

    Lenko, D., Schlögl, S., Kern, W., Schaller, R. & Holzner, A., 2012.

    Research output: Contribution to conference › Poster › Research

  85. 2011
  86. Published

    Evaluation of different methods to characterize failure mechanisms of composite materials used as electrical insulation in high voltage applications

    Lenko, D., Schlögl, S., Bichler, S., Lemesch, G., Ramsauer, F. & Kern, W., 2011, Proceedings of the 27th World Congress of the Polymer Processing Society.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    Fluorination of elastomer materials

    Kern, W., Kramer, R., Lenko, D., Schröttner, H., Schaller, R., Holzner, A. & Schlögl, S., 2011, In: European polymer journal. p. 2321-2330

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Manufacture of accelerator-free medical gloves via UV techniques

    Schlögl, S., Temel, A., Schaller, R., Holzner, A. & Kern, W., 2011, Proceedings of the 27th World Congress of the Polymer Processing Society.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    UV induced microcellular foaming-A new approach towards the production of 3D structures in offset printing techniques

    Schlögl, S., Kern, W., Reischl, M. & Ribitsch, V., 2011, In: Progress in organic coatings. p. 54-61

    Research output: Contribution to journal › Article › Research › peer-review

  90. 2010
  91. Published

    Biological evaluation and chemical characterization of photochemically crosslinked surgical gloves

    Schlögl, S., Temel, A., Schaller, R., Holzner, A. & Kern, W., 2010, Conference Proceedings: Latex and Synthetic Polymer Dispersions 2010, International Conference on Latex and Latex-based Products.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    Biological evaluation and chemical characterization of photochemically crosslinked surgical gloves

    Schlögl, S., Temel, A., Schaller, R., Holzner, A. & Kern, W., 2010, In: Rubber world. p. 17-20 243.

    Research output: Contribution to journal › Article › Research

  93. Published

    Contributions to the characterization of chlorinated polyisoprene surfaces

    Lenko, D., Schlögl, S., Kramer, R., Kern, W., Schaller, R. & Holzner, A., 2010.

    Research output: Contribution to conference › Poster › Research

  94. Published

    Direct fluorination of elastomeric surfaces

    Kramer, R., Schlögl, S., Schaller, R., Holzner, A. & Kern, W., 2010.

    Research output: Contribution to conference › Poster › Research

  95. Published

    Investigation on failure mechanisms of electrical insulation in high voltage applications

    Lenko, D., Schlögl, S., Kern, W., Bichler, S., Lemesch, G. & Ramsauer, F., 2010.

    Research output: Contribution to conference › Poster › Research

  96. Published

    Manufacture of Non-Allergenic Surgical Gloves via UV Techniques

    Schlögl, S., Temel, A., Kern, W., Schaller, R. & Holzner, A., 2010, In: Kautschuk, Gummi, Kunststoffe. 63, 5, p. 187-191

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Prevulcanization of natural rubber latex by UV techniques: a process towards reducing type IV chemical sensitivity of latex articles

    Kern, W., Temel, A., Schaller, R., Holzner, A. & Schlögl, S., 2010, In: Rubber chemistry and technology. 83, p. 133-148

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Survey of chemical residues and biological evaluation of photochemically pre-vulcanized surgical gloves

    Aust, N., Temel, A., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 2010, In: Monatshefte für Chemie = Chemical monthly. 141, p. 1365-1372

    Research output: Contribution to journal › Article › Research › peer-review

  99. 2009
  100. Published

    Photochemical cross-linking of latex: a new technology for the production of non-allergenic latex articles

    Schlögl, S., Temel, A., Schaller, R., Holzner, A. & Kern, W., 2009, Proceedings of the international rubber conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. 2008
  102. Published

    Crosslinking of natural rubber latex by UV-techniques: a novel approach towards non-allergenic latex gloves

    Schlögl, S., Kern, W., Schaller, R. & Holzner, A., 2008.

    Research output: Contribution to conference › Poster › Research

  103. Published

    Photochemical Pre-vulcanisation of Natural Rubber Latex: A New Process Towards Non-Allergenic Latex Articles

    Schlögl, S., Temel, A., Schaller, R., Holzner, A. & Kern, W., 2008, Conference Proceedings: Latex and Synthetic Polymer Dispersions 2008.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (292)