Sandra Schlögl

(Former)

51 - 100 out of 292Page size: 50

Research output

  1. 2023
  2. Published

    Peroxide-based crosslinking of solid silicone rubber: part II: The counter-intuitive influence of dicumylperoxide concentration on crosslink effectiveness and related network structure

    Azevedo, M., Monks, A.-M., Kerschbaumer, R., Schlögl, S., Saalwächter, K., Walluch, M., Consolati, G. & Holzer, C., 15 Aug 2023, In: Journal of applied polymer science. 140.2023, 31, 17 p., e54111.

    Research output: Contribution to journal › Article › Research › peer-review

  3. E-pub ahead of print

    Tactile friction and perception of UV-curable coatings and their relation to physical surface parameters and contact mechanic simulation

    Ules, T., Grießer, M., Hausberger, A., Schipfer, C., Mansouri, M., Fuchs, P., Schlögl, S. & Gruber, D. P., 28 Jul 2023, (E-pub ahead of print) In: Journal of coatings technology and research. 20.2023, 6, p. 1803-1814 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. E-pub ahead of print

    Investigation of expandable fillers for reversible adhesive bonding in photovoltaic modules

    Wanghofer, F., Wolfberger, A., Oreski, G., Neumaier, L. & Schlögl, S., 20 Jul 2023, (E-pub ahead of print) In: International Journal of Adhesion and Adhesives. 126.2023, August, 10 p., 103454.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Vitrimeric shape memory polymer-based fingertips for adaptive grasping

    Kashef Tabrizian, S., Alabiso, W., Shaukat, U., Terryn, S., Rossegger, E., Brancart, J., Legrand, J., Schlögl, S. & Vanderborght, B., 12 Jul 2023, In: Frontiers in robotics and AI. 10.2023, 1206579.

    Research output: Contribution to journal › Article › Research › peer-review

  6. E-pub ahead of print

    3D Printing of Covalent Adaptable Networks: Overview, Applications and Future Prospects

    Bijalwan, V., Rana, S., Singh, H. K., Yun, G. J., Jamil, M. & Schlögl, S., 30 Jun 2023, (E-pub ahead of print) In: Polymer reviews. 64.2024, 1, p. 36-79 44 p.

    Research output: Contribution to journal › Review article › peer-review

  7. E-pub ahead of print

    Digital light processing 3D printing of dynamic magneto-responsive thiol-acrylate composites

    Cazin, I., Rossegger, E., Roppolo, I., Sangermano, M., Granitzer, P., Rumpf, K. & Schlögl, S., 9 Jun 2023, (E-pub ahead of print) In: RSC Advances. 13.2023, 26, p. 17536-17544 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Spatially resolved photoactivation of dynamic exchange reactions in 3D-printed thiol-ene vitrimers

    Reisinger, D., Hellmayr, A., Paris, M., Haas, M., Grießer, T. & Schlögl, S., 7 Jun 2023, In: Polymer Chemistry. 14.2023, 26, p. 3082-3090 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    The effect of photolatent catalysts on the exchange kinetics of dual-wavelength 3D printable and photopatternable thiol-click vitrimers

    Rossegger, E., Shaukat, U., Moazzen, K., Fleisch, M., Berer, M. & Schlögl, S., 2 May 2023, In: Polymer Chemistry. 14.2023, 21, p. 2640-2651 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    Crosslinking of XNBR latex with multifunctional epoxides: An energy-efficient curing strategy for the fabrication of accelerator-free rubber gloves

    Grabmayer, T., Manhart, J. C., Kaiser, S., Schaller, R., Holzner, A. & Schlögl, S., 19 Apr 2023, (E-pub ahead of print) In: Journal of applied polymer science. 140.2023, 25, 12 p., e53973.

    Research output: Contribution to journal › Article › Research › peer-review

  11. E-pub ahead of print

    Chiral-based mechanical metamaterial with tunable normal-strain shear coupling effect

    Fleisch, M., Thalhamer, A., Meier, G., Huber, P., Fuchs, P., Pinter, G. G., Schlögl, S. & Berer, M., 15 Mar 2023, (E-pub ahead of print) In: Engineering Structures. 284.2023, 1 June, 15 p., 115952.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Thermally Latent Bases in Dynamic Covalent Polymer Networks and their Emerging Applications

    Reisinger, D., Kriehuber, M. U., Bender, M., Bautista-Anguís, D., Rieger, B. & Schlögl, S., 14 Mar 2023, In: Advanced materials. 35.2023, 24, 27 p., 2300830.

    Research output: Contribution to journal › Article › Research › peer-review

  13. E-pub ahead of print

    Soft dielectric actuator produced by multi-material fused filament fabrication 3D printing

    Raguž, I., Berer, M., Fleisch, M., Holzer, C., Brancart, J., Vanderborght, B. & Schlögl, S., 6 Mar 2023, (E-pub ahead of print) In: Polymers for Advanced Technologies. 34.2023, 6, p. 1967-1978 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Sustainable Bio-Based UV-Cured Epoxy Vitrimer from Castor Oil

    Bergoglio, M., Reisinger, D., Schlögl, S., Grießer, T. & Sangermano, M., 18 Feb 2023, In: Polymers. 15.2023, 4, 12 p., 1024.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Accelerated Thermo-Catalytic Degradation of Perfluoropolyether (PFPE) Lubricants for Space Applications

    Gleirscher, M., Wolfberger, A., Schlögl, S., Hołyńska, M. & Hausberger, A., 14 Feb 2023, In: Lubricants. 11.2023, 2, 15 p., 81.

    Research output: Contribution to journal › Article › Research › peer-review

  16. E-pub ahead of print

    Implementation of thermo-responsive polymer coatings for an early warning against critical temperature states of thermo-sensitive electronic devices with metal oxide (MOx) gas sensors

    Bautista-Anguís, D., Wolfberger, A., Rabe, M., Tomaszczyk, S. & Schlögl, S., 14 Feb 2023, (E-pub ahead of print) In: Progress in organic coatings. 178.2023, May, 11 p., 107444.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    A pyrrole–carbazole photoinitiator for radical and cationic visible light LED photopolymerization

    Li, Y., Shaukat, U., Schlögl, S., Xue, T., Li, J., Nie, J. & Zhu, X., 3 Jan 2023, In: European polymer journal. 182.2023, 3 January, 7 p., 111700.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Wavelength Selective Multi-Material 3D Printing of Soft Active Devices Using Orthogonal Photoreactions

    Rossegger, E., Strasser, J., Höller, R., Fleisch, M., Berer, M. & Schlögl, S., Jan 2023, In: Macromolecular rapid communications. 44.2023, 2, 9 p., 2200586.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Development and characterisation of vitrimer-like elastomers and elastomeric composites from HXNBR rubber

    Grabmayer, T., Kaiser, S., Pilz, G., Kern, W. & Schlögl, S., 2023.

    Research output: Contribution to conference › Poster › Research

  20. Published

    Development and characterization of functional coating to improve the friction behavior of thermoplastic surfaces

    Gleirscher, M., Kopp, M., Hausberger, A., Lackner, J. & Schlögl, S., 2023.

    Research output: Contribution to conference › Poster › Research

  21. Published

    Development of reprocessable adhesive systems for carbon and glass fiber reinforced plastics applications

    Bautista-Anguís, D., Reiner, L., Wolfberger, A., Maar, S., Röper, F., Wolfahrt, M., Schlögl, S. & Hader-Kregl, L., 2023.

    Research output: Contribution to conference › Poster › Research

  22. Published

    Development of reprocessable adhesive systems for carbon and glass fiber reinforced polymer applications

    Bautista-Anguís, D., Reiner, L., Wolfberger, A. & Schlögl, S., 2023.

    Research output: Contribution to conference › Poster › Research

  23. Published

    Digital light processing 3D printing of dynamic magneto-responsive thiol-acrylate composites

    Cazin, I., Rossegger, E., Roppolo, I., Sangermano, M., Granitzer, P., Rumpf, K. & Schlögl, S., 2023.

    Research output: Contribution to conference › Poster › Research

  24. Published

    Frontal Polymerization of Dynamic Networks

    Schmidleitner, C., Hirner, S., Reisinger, D., Schlögl, S. & Rossegger, E., 2023.

    Research output: Contribution to conference › Poster › Research

  25. Published

    Implementation and investigation of a vitrimer-like behavior in HXNBR elastomer and elastomer composites

    Grabmayer, T., Kaiser, S., Jandl, J., Novak, P., Wurzer, S., Kern, W. & Schlögl, S., 2023.

    Research output: Contribution to conference › Poster › Research

  26. Published

    Sequentiaql orthogonality by [2+2] cycloadditions in dual-cure photopolymers

    Müller, S. M., Nelson, B., Naderer, C., Sivun, D., Jacak, J., Schlögl, S. & Griesser, T., 2023.

    Research output: Contribution to conference › Poster › Research

  27. Published

    Sustainable bio-based UV-cured epoxy vitrimer from castor oil

    Bergoglio, M., Reisinger, D., Schlögl, S., Griesser, T. & Sangermano, M., 2023.

    Research output: Contribution to conference › Poster › Research

  28. Published

    Synthesis and Characterization of a Bio-Based Transesterification Catalyst for Green Photopolymers

    Sölle, B., Schlögl, S. & Rossegger, E., 2023.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Synthesis and characterization of magnetic pholopolymers for nanoimprint lithography

    Schmidleitner, C., Schlögl, S., Trimmel, G. & Rossegger, E., 2023.

    Research output: Contribution to conference › Poster › Research

  30. Published

    Synthesis and characterization of magnetic photopolymers for nanoimprint lithography

    Schmidleitner, C., Schlögl, S., Trimmel, G. & Rossegger, E., 2023.

    Research output: Contribution to conference › Poster › Research

  31. 2022
  32. E-pub ahead of print

    Vat photopolymerization 3D printing with light-responsive thiol-norbornene photopolymers

    Rossegger, E., Li, Y., Frommwald, H. & Schlögl, S., 9 Dec 2022, (E-pub ahead of print) In: Monatshefte fur Chemie. 154.2023, 5, p. 473-480 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Vat Photopolymerization 3D-Printing of Dynamic Thiol-Acrylate Photopolymers Using Bio-Derived Building Blocks

    Shaukat, U., Sölle, B., Rossegger, E., Rana, S. & Schlögl, S., 8 Dec 2022, In: Polymers. 14.2022, 24, 14 p., 5377.

    Research output: Contribution to journal › Article › Research › peer-review

  34. E-pub ahead of print

    Blocked Phosphates as Photolatent Catalysts for Dynamic Photopolymer Networks

    Dertnig, C. A., Guedes de la Cruz, G. D. C., Neshchadin, D., Schlögl, S. & Grießer, T., 24 Nov 2022, (E-pub ahead of print) In: Angewandte Chemie - International Edition. 62.2022, 10, 5 p., e202215525.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Self-healable fiber-reinforced vitrimer composites: overview and future prospects

    Sharma, H., Rana, S., Singh, P., Hayashi, M., Binder, W. H., Rossegger, E., Kumar, A. & Schlögl, S., 14 Nov 2022, In: RSC Advances. 12.2022, 50, p. 32569-32582 14 p.

    Research output: Contribution to journal › Review article › peer-review

  36. Published

    Peroxide-Based Crosslinking of Solid Silicone Rubber, Part I: Insights into the Influence of Dicumylperoxide Concentration on the Curing Kinetics and Thermodynamics Determined by a Rheological Approach

    Azevedo, M., Monks, A. M., Kerschbaumer, R. C., Schlögl, S. & Holzer, C., 18 Oct 2022, In: Polymers. 14.2022, 20, 22 p., 4404.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Chalcones as sequential λ-orthogonal crosslinkers in dual-cure photopolymers

    Müller, S. M., Nelson, B., Schlögl, S. & Grießer, T., 21 Sept 2022.

    Research output: Contribution to conference › Presentation › Research

  38. Published

    Assessment of Epoxy Functionalized Poly(dimethylsiloxane) Vitrimers Catalyzed with Covalently Attached Amines as Reversible Adhesives

    Wanghofer, F., Wolfberger, A., Oreski, G. & Schlögl, S., Sept 2022, In: Macromolecular materials and engineering. 307.2022, 9, 9 p., 2200237.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Spatially controlling the mechanical properties of 3D printed objects by dual-wavelength vat photopolymerization

    Cazin, I., Gleirscher, M. O., Fleisch, M., Berer, M., Sangermano, M. & Schlögl, S., Sept 2022, In: Additive Manufacturing. 57.2022, September, 9 p., 102977.

    Research output: Contribution to journal › Article › Research › peer-review

  40. E-pub ahead of print

    3D Printing of Soft Magnetoactive Devices with Thiol-Click Photopolymer Composites

    Rossegger, E., Höller, R., Hrbinič, K., Sangermano, M., Griesser, T. & Schlögl, S., 26 Jul 2022, (E-pub ahead of print) In: Advanced engineering materials. 25.2022, 7, 9 p., 2200749.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Effect of a Dicycloaliphatic Epoxide on the Thermo-Mechanical Properties of Alkyl, Aryl Epoxide Monomers Cured via UV-Induced Cationic Frontal Polymerization

    Malik, M. S., Wolfahrt, M., Sangermano, M. & Schlögl, S., Jul 2022, In: Macromolecular materials and engineering. 307.2022, 7, 10 p., 2100976.

    Research output: Contribution to journal › Article › Research › peer-review

  42. E-pub ahead of print

    Recent Advances in Type I Photoinitiators for Visible Light Induced Photopolymerization

    Müller, S. M., Schlögl, S., Wiesner, T., Haas, M. & Grießer, T., 27 Jun 2022, (E-pub ahead of print) In: ChemPhotoChem . 6.2022, 11, 13 p., e202200091.

    Research output: Contribution to journal › Review article › peer-review

  43. Published

    A Review of Multi-Material 3D Printing of Functional Materials via Vat Photopolymerization

    Shaukat, U., Rossegger, E. & Schlögl, S., 16 Jun 2022, In: Polymers. 14.2022, 12, 69 p., 2449.

    Research output: Contribution to journal › Review article › peer-review

  44. E-pub ahead of print

    Asymmetric chiral and antichiral mechanical metamaterials with tunable Poisson's ratio

    Fleisch, M., Thalhamer, A., Meier, G., Fuchs, P. F., Pinter, G., Schlögl, S. & Berer, M., 7 Jun 2022, (E-pub ahead of print) In: APL Materials. 10.2022, 6, 17 p., 061105.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Streamlined concept towards spatially resolved photoactivation of dynamic transesterification in vitrimeric polymers by applying thermally stable photolatent bases

    Reisinger, D., Dietliker, K., Sangermano, M. & Schlögl, S., 7 Mar 2022, In: Polymer Chemistry. 13.2022, 9, p. 1169-1176 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Hybrid In Situ Reinforcement of EPDM Rubber Compounds Based on Phenolic Novolac Resin and Ionic Coagent

    Strohmeier, L., Balasooriya, W., Schrittesser, B., van Duin, M. & Schlögl, S., 25 Feb 2022, In: Applied Sciences : open access journal. 12.2022, 5, 17 p., 2432.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Influence of morphology and chemical surface composition on electrical conductivity of SiC microspheres

    Pleșa, I., Radl, S., Schichler, U., Ramsauer, F., Ladstätter, W., Bergmann, I., Kern, W. & Schlögl, S., Jan 2022, In: Surface Science. 715.2022, January, 11 p., 121942.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    A “close-then-heal” approach based on shape memory effect to improve the healing efficiency of thiolacrylate dynamic networks

    Alabiso, W., Hron, T., Reisinger, D., Bautista-Anguís, D. & Schlögl, S., 2022.

    Research output: Contribution to conference › Poster › Research

  49. Published

    Addressing the challenges in frontal curing of high-performance carbon fiber reinforced composites

    Malik, M. S., Grasser, V., Wolfahrt, M., Schlögl, S. & Pinter, G. G., 2022, Proceedings of the 20th European Conference on Composite Materials - Composites Meet Sustainability. Vol. Vol. 1 - 6. p. 587 593 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Advancing photocurable resin formulations for dual-wavelength digital light processing 3D printing

    Sebalj, N., Cazin, I., Schlögl, S., Berer, M., Sangermano, M. & Fleisch, M., 2022.

    Research output: Contribution to conference › Poster › Research

  51. Published

    A photolatent organophosphate for the local activation of dynamic exchange reactions in 3D printed photopolymers

    Dertnig, C. A., Guedes de la Cruz, G. D. C., Neshchadin, D., Schlögl, S. & Grießer, T., 2022.

    Research output: Contribution to conference › Poster › Research

  52. Published

    Chalcone [2+2] cycloaddition for λ-orthogonal dual-cure photopolymers

    Müller, S. M., Nelson, B., Schlögl, S. & Grießer, T., 2022.

    Research output: Contribution to conference › Poster › Research

Previous 1 2 3 4 5 6 Next
View graph of relations

Latest Research Output

View more (292)