Sandra Schlögl

1 - 100 out of 292Page size: 100

Research output

  1. 2025
  2. Published

    Frontal polymerization of thiol-acrylate covalent adaptable networks

    Schmidleitner, C., Kriehuber, M. U., Korotkov, R., Schlögl, S. & Rossegger, E., 14 Jan 2025, In: Polymer Chemistry. 16.2025, 8, p. 963-971 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2024
  4. Published

    3D-Printed Acrylated Soybean Oil Scaffolds with Vitrimeric Properties Reinforced by Tellurium-Doped Bioactive Glass

    Bergoglio, M., Kriehuber, M., Sölle, B., Rossegger, E., Schlögl, S., Najmi, Z., Cochis, A., Ferla, F., Miola, M., Vernè, E. & Sangermano, M., 23 Dec 2024, In: Polymers. 16.2024, 24, 19 p., 3614.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Wavelength-Dependent Dynamic Behavior in Thiol-Ene Networks Based on Disulfide Exchange

    Sölle, B., Schmallegger, M., Schlögl, S. & Rossegger, E., 1 Dec 2024, In: Journal of the American Chemical Society. 146.2024, 49, p. 34152–34157 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Light-Driven, Reversible Spatiotemporal Control of Dynamic Covalent Polymers

    Reisinger, D., Sietmann, A., Das, A., Plutzar, S., Korotkov, R., Rossegger, E., Walluch, M., Holler-Stangl, S., Hofer, T. S., Dielmann, F., Glorius, F. & Schlögl, S., 21 Nov 2024, In: Advanced materials. 36.2024, 47, 2411307.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Enhanced hydrogen gas barrier properties in highly filled acrylonitrile butadiene rubber with high aspect ratio filler

    Clute, C., Hafner, T., Balasooriya, W., Kaiser, A., Pinter, G. & Schlögl, S., 19 Nov 2024, In: International Journal of Hydrogen Energy. 91.2024, 19 November, p. 404-411 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    An optimization strategy for customizable global elastic deformation of unit cell-based metamaterials with variable material section discretization

    Thalhamer, A., Fleisch, M., Schuecker, C., Fuchs, P. F., Schlögl, S. & Berer, M., 12 Nov 2024, In: Advances in Engineering Software. 199.2025, January, 17 p., 103817.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Design of photocurable thiol-epoxy resins for the processing of vitrimers with vat photopolymerisation 3D printing

    Gaca, S., Dietliker, K., Rossegger, E. & Schlögl, S., 30 Oct 2024, In: Reactive and Functional Polymers. 205.2024, December, 9 p., 106085.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Self-healable epoxy/graphene oxide vitrimers and their recyclable glass fiber reinforced composites

    Sharma, H., Bijalwan, V., Mourad, A. H. I., Kumar, A., Schlögl, S. & Rana, S., 24 Oct 2024, In: Journal of Reinforced Plastics and Composites. ??? Stand: 10. Februar 2025, ??? Stand: 10. Februar 2025, 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Synthesis and Characterization of Rebondable Polyurethane Adhesives Relying on Thermo-Activated Transcarbamoylation

    Bautista-Anguís, D., Reiner, L., Röper, F., Maar, S., Wolfahrt, M., Wolfberger, A. & Schlögl, S., 3 Oct 2024, In: Polymers. 16.2024, 19, 13 p., 2799.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Three-dimensional mechanical metamaterial with tunable engineering constants in a broad range

    Fleisch, M., Pinter, G., Schlögl, S. & Berer, M., 5 Sept 2024, In: Results in Engineering. 23.2024, September, 4 p., 102860.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Microscale manipulation of bond exchange reactions in photocurable vitrimers with a covalently attachable photoacid generator

    Korotkov, R., Alabiso, W., Jelinek, A., Schmallegger, M., Li, Y., Schlögl, S. & Rossegger, E., 3 Sept 2024, In: Chemical science. 15.2024, 39, p. 16271-16280 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Reprocessable carbon fiber vitrimer composites: Reclamation and reformatting of carbon fibers for second generation composite materials

    Sharma, H., Bender, M., Kim, G., Lee, D., Caglayan, C., Schlögl, S., Yun, G. J., Kumar, A. & Rana, S., 24 Aug 2024, In: Journal of Applied Polymer Science. 141.2024, 41, 15 p., e56074.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Characterization of atmospheric pressure plasma deposited (APPD) coatings to improve the friction behavior of thermoplastic surfaces

    Gleirscher, M., Kopp, D., Hausberger, A., Angerer, P., Lackner, J. & Schlögl, S., 23 Jun 2024, In: Surface and Coatings Technology. 488.2024, 30 July, 16 p., 131040.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Dual cross-linking of XNBR latex with epoxy-functional calcium silicate particles for the production of accelerator-free medical gloves

    Grabmayer, T., Manhart, J., Fleischmann, D., Kaiser, S., Schaller, R., Holzner, A. & Schlögl, S., 20 Jun 2024, In: Journal of applied polymer science. 141.2024, 24, 12 p., e55498.

    Research output: Contribution to journal › Article › Research › peer-review

  17. E-pub ahead of print

    Reshapable bio-based thiol-ene vitrimers for nanoimprint lithography: Advanced covalent adaptability for tunable surface properties

    Sölle, B., Reisinger, D., Heupl, S., Jelinek, A., Schlögl, S. & Rossegger, E., 8 Jun 2024, (E-pub ahead of print) In: Reactive & functional polymers. 202.2024, September, 8 p., 105972.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Probing local adhesion: A miniaturized multi-photon lithography design demonstrated on silanized vs. untreated surfaces

    Jelinek, A., Rossegger, E., Schlögl, S., Kiener, D. & Alfreider, M., Jun 2024, In: Materials and Design. 242.2024, June, 13 p., 112994.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Multi-Material 3D Printing of Biobased Epoxy Resins

    Bergoglio, M., Rossegger, E., Schlögl, S., Griesser, T., Waly, C., Arbeiter, F. & Sangermano, M., 27 May 2024, In: Polymers. 16.2024, 11, 18 p., 1510.

    Research output: Contribution to journal › Article › Research › peer-review

  20. E-pub ahead of print

    Cationic UV-curing of bio-based epoxidized castor oil vitrimers with electrically conductive properties

    Bergoglio, M., Palazzo, G., Reisinger, D., Porcarello, M., Kortaberria, G., Schlögl, S. & Sangermano, M., 5 May 2024, (E-pub ahead of print) In: Reactive & functional polymers. 200.2024, July, 9 p., 105936.

    Research output: Contribution to journal › Article › Research › peer-review

  21. E-pub ahead of print

    Design of Reversible Adhesives by Using a Triple Function of Ionic Liquids

    Wanghofer, F., Kriehuber, M., Reisinger, D., Floh, F., Wolfahrt, M. & Schlögl, S., 2 May 2024, (E-pub ahead of print) In: Macromolecular materials and engineering. 309.2024, 9, 9 p., 2400011.

    Research output: Contribution to journal › Article › Research › peer-review

  22. E-pub ahead of print

    Vitrimer Transition Phenomena from the Perspective of Thermal Volume Expansion and Shape (In)stability

    Klingler, A., Reisinger, D., Schlögl, S., Wetzel, B., Breuer, U. & Krüger, J. K., 25 Apr 2024, (E-pub ahead of print) In: Macromolecules. 57.2024, 9, p. 4246-4253 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. E-pub ahead of print

    Morphological investigations on silica and carbon-black filled acrylonitrile butadiene rubber for sealings used in high-pressure H2 applications

    Clute, C., Balasooriya, W., Cano Murillo, N., Theiler, G., Kaiser, A., Fasching, M., Schwarz, T., Hausberger, A., Pinter, G. & Schlögl, S., 23 Apr 2024, (E-pub ahead of print) In: International Journal of Hydrogen Energy . 67.2024, 20 May, p. 540-552 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Synthesis of Bio-Based Polyester Resins for Vat Photopolymerization 3D Printing

    Cazin, I., Ocepek, M., Kecelj, J., Stražar, A. S. & Schlögl, S., 19 Apr 2024, In: Materials. 17.2024, 8, 13 p., 1890.

    Research output: Contribution to journal › Article › Research › peer-review

  25. E-pub ahead of print

    MetamaterialFinder: A software framework for discovering and analyzing mechanical metamaterials based on simple closed curves

    Fleisch, M., Thalhamer, A., Schlögl, S., Fuchs, P. F., Pinter, G. & Berer, M., 2 Apr 2024, (E-pub ahead of print) In: Advances in Engineering Software. 192.2024, June, 18 p., 103626.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Dual-Wavelength Vat Photopolymerization 3D Printing with Hybrid Acrylate-Epoxy Resins: Influence of Resin Composition on Microstructure and Mechanical Properties

    Cazin, I., Plevová, K., Alabiso, W., Vidović, E. & Schlögl, S., Apr 2024, In: Advanced Engineering Materials. 26.2024, 8, 12 p., 2301699.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Prospects in the application of a frontally curable epoxy resin for cured-in-place-pipe rehabilitation

    Malik, M. S., Wolfahrt, M., Domínguez Pardo, J. J., Bublitz, D. & Schlögl, S., 5 Mar 2024, In: Journal of applied polymer science. 141.2024, 9, 13 p., e55024.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Redox cationic frontal polymerization: a rapid curing approach for carbon fiber-reinforced composites with high fiber content

    Malik, M. S., Wolfahrt, M., Pinter, G. & Schlögl, S., 22 Feb 2024, In: Monatshefte fur Chemie. 155.2024, 2, p. 205-217 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Rapid tooling for rubber extrusion molding by digital light processing 3D printing with dual curable vitrimers

    Höller, R., Hrbinič, K., Reisinger, D., Alabiso, W., Schuschnigg, S., Fleisch, M., Waly, C., Rossegger, E. & Schlögl, S., 19 Feb 2024, In: Applied research. 3.2024, 4, 10 p., e202300133.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Ternary low-friction coatings on thermoplastics by plasma spraying: Investigations on the process-structure

    Kopp, D., Gleirscher, M., Stummer, M., Major, L., Hausberger, A., Schlögl, S., Lackner, J. M., Kaindl, R., Prethaler, T., Coclite, A. M. & Waldhauser, W., 15 Feb 2024, In: Surface and Coatings Technology. 477.2024, 15 February, 14 p., 130303.

    Research output: Contribution to journal › Article › Research › peer-review

  31. E-pub ahead of print

    Thermal volume expansion as seen by Temperature-modulated optical refractometry, Oscillating dilatometry and Thermo-mechanical analysis

    Klingler, A., Gilberg, M., Reisinger, D., Schlögl, S., Wetzel, B. & Krüger, J. K., 14 Jan 2024, (E-pub ahead of print) In: Polymer Testing. 131.2024, February, 9 p., 108340.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Dual-vat photopolymerization 3D printing of vitrimers

    Shaukat, U., Thalhamer, A., Rossegger, E. & Schlögl, S., 5 Jan 2024, In: Additive Manufacturing. 79.2024, 5 January, 9 p., 103930.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Influence of Anion and Cation Structures on Ionic Liquid Epoxy-Based Vitrimers

    Wanghofer, F., Trausner, C., Reisinger, D., Wolfahrt, M. & Schlögl, S., 1 Jan 2024, In: ACS applied polymer materials. 6.2024, 1, p. 649-657 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Different approaches for the fabrication of functional surfaces by introducing micro-patterns on polymers

    Gleirscher, M., Rossegger, E., Greco, F. (Co-editor) & Schlögl, S., 2024.

    Research output: Contribution to conference › Poster › Research

  35. Published

    Dynamic thioester-networks: Synthesis and Characterization

    Egger, P., Trimmel, G., Schlögl, S. & Rossegger, E., 2024.

    Research output: Contribution to conference › Poster › Research

  36. Published

    New debonding on-demand concepts for the repair and disassembly of adhesively-bonded structures

    Sabatino, F. A., Gleirscher, M., Alabiso, W., Sölle, B., Rossegger, E. & Schlögl, S., 2024.

    Research output: Contribution to conference › Poster › Research

  37. Published

    PLASMA MODIFICATION OF POLYACRYLONITRILE POWDER OR SOLUTION PRIOR ELECTROSPINNING

    Pijáková, B., Elbataioui, A., Rafailovic, L., Bautista, A. D., Schlögl, S., Dvořáková, E., Mühlbacher, I. & Ráheľ, J., 2024, NANOCON 2023 - 15th International Conference on Nanomaterials - Research and Application, Conference Proceedings. p. 154-159 6 p. (NANOCON Conference Proceedings - International Conference on Nanomaterials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Reformable bio-based thiol-ene vitrimers for nanoimprint lithography: enhanced covalent adaptability for adjustable surface properties

    Uher, J. M., Sölle, B., Reisinger, D., Sölle, B., Heupl, S., Jelinek, A., Schlögl, S. & Rossegger, E., 2024.

    Research output: Contribution to conference › Poster › Research

  39. Published

    Single and Multi-material Topology Optimization of Continuum Structures: ABAQUS Plugin

    Patel, D., Rockenbauer, T., Schlögl, S. & Lang, M., 2024, Mathematical Modeling in Physical Sciences - 12th IC-MSQUARE, 2023. Vlachos, D. (ed.). Springer, p. 3-17 15 p. (Springer Proceedings in Mathematics and Statistics; vol. 446).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Surface modification of thiol-ene based polymers for the development of microfluidic devices

    Maier, J., Salehi Siouki, S., Schlögl, S. & Griesser, T., 2024.

    Research output: Contribution to conference › Poster › Research

  41. Published

    Sustainably multifunctional coating design for battery safety applications based on dynamic chemistry

    Hoang, K., Bautista, A. D. & Schlögl, S., 2024.

    Research output: Contribution to conference › Poster › Research

  42. Published

    Synthesis and characterization of covalent adaptive networks based on thiol-thioester exchange reactions

    Egger, P., Trimmel, G., Schlögl, S. & Rossegger, E., 2024.

    Research output: Contribution to conference › Poster › Research

  43. 2023
  44. E-pub ahead of print

    Biobased Vitrimeric Epoxy Networks

    Sangermano, M., Bergoglio, M. & Schlögl, S., 24 Dec 2023, (E-pub ahead of print) In: Macromolecular materials and engineering. 309.2024, 9, 12 p., 2300371.

    Research output: Contribution to journal › Review article › peer-review

  45. Published

    The use of a sulfonium-based photoacid generator in thiol-ene photopolymers for the controlled activation of transesterification through chemical amplification

    Alabiso, W., Li, Y., Brancart, J., Van Assche, G., Rossegger, E. & Schlögl, S., 16 Dec 2023, In: Polymer Chemistry. 15.2024, 4, p. 321-331 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    A black-box optimization strategy for customizable global elastic deformation behavior of unit cell-based tri-anti-chiral metamaterials

    Thalhamer, A., Fleisch, M., Schuecker, C., Fuchs, P. F., Schlögl, S. & Berer, M., Dec 2023, In: Advances in Engineering Software. 186.2023, December, 19 p., 103553.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    On-Demand Activation of Transesterification by Chemical Amplification in Dynamic Thiol-Ene Photopolymers

    Alabiso, W., Sölle, B., Reisinger, D., Guedes de la Cruz, G. D. C., Schmallegger, M., Grießer, T., Rossegger, E. & Schlögl, S., 6 Nov 2023, In: Angewandte Chemie - International Edition. 62.2023, 45, 6 p., e202311341.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Synthesis and characterization of bio-based transesterification catalysts for green 3D-printable dynamic photopolymers

    Sölle, B., Shaukat, U., Rossegger, E. & Schlögl, S., 19 Oct 2023, In: Polymer Chemistry. 44.2023, 14, p. 4994-5003 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Redox cationic frontal polymerization: a new strategy towards fast and efficient curing of defect-free fiber reinforced polymer composites

    Malik, M. S., Wolfahrt, M. & Schlögl, S., 4 Oct 2023, In: RSC Advances. 13.2023, 41, p. 28993-29003 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    In Situ Observation of Micro-Patterned Elastomeric Surfaces: The Formation of the Area of Real Contact and the Influence on Its Friction and Deformation Behaviour

    Hausberger, A., Pecora, M., Favier, D., Rossegger, E., Tockner, M., Ules, T., Haselmann, M., Schlögl, S. & Gauthier, C., 29 Sept 2023, In: Materials. 16.2023, 19, 17 p., 6489.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Controlling Curing Kinetics in Thiol-Ene Reactions with Light

    Höller, R., Müller, S. M., Schlögl, S. & Griesser, T., 21 Sept 2023.

    Research output: Contribution to conference › Poster › Research

  52. Published

    Smart Materials for Green(er) Cities, a Short Review

    Nicolay, P., Schlögl, S., Thaler, S. M., Humbert, C. & Filipitsch, B., 16 Aug 2023, In: Applied Sciences (Switzerland). 13.2023, 16, 19 p., 9289.

    Research output: Contribution to journal › Review article › peer-review

  53. E-pub ahead of print

    Ti40Zr10Cu36Pd14 bulk metallic glass as oral implant material

    Rezvan, A., Sharifikolouei, E., Soprunyuk, V., Schranz, W., Todt, J., Lassnig, A., Gammer, C., Sifferlinger, N. A., Asci, A., Okulov, I., Schlögl, S., Keckes, J., Najmi, Z., Cochis, A., Scalia, A. C., Rimondini, L., Sarac, B. & Eckert, J., 16 Aug 2023, (E-pub ahead of print) In: Materials and Design. 233.2023, 10 p., 112256.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Peroxide-based crosslinking of solid silicone rubber: part II: The counter-intuitive influence of dicumylperoxide concentration on crosslink effectiveness and related network structure

    Azevedo, M., Monks, A.-M., Kerschbaumer, R., Schlögl, S., Saalwächter, K., Walluch, M., Consolati, G. & Holzer, C., 15 Aug 2023, In: Journal of applied polymer science. 140.2023, 31, 17 p., e54111.

    Research output: Contribution to journal › Article › Research › peer-review

  55. E-pub ahead of print

    Tactile friction and perception of UV-curable coatings and their relation to physical surface parameters and contact mechanic simulation

    Ules, T., Grießer, M., Hausberger, A., Schipfer, C., Mansouri, M., Fuchs, P., Schlögl, S. & Gruber, D. P., 28 Jul 2023, (E-pub ahead of print) In: Journal of coatings technology and research. 20.2023, 6, p. 1803-1814 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. E-pub ahead of print

    Investigation of expandable fillers for reversible adhesive bonding in photovoltaic modules

    Wanghofer, F., Wolfberger, A., Oreski, G., Neumaier, L. & Schlögl, S., 20 Jul 2023, (E-pub ahead of print) In: International Journal of Adhesion and Adhesives. 126.2023, August, 10 p., 103454.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Vitrimeric shape memory polymer-based fingertips for adaptive grasping

    Kashef Tabrizian, S., Alabiso, W., Shaukat, U., Terryn, S., Rossegger, E., Brancart, J., Legrand, J., Schlögl, S. & Vanderborght, B., 12 Jul 2023, In: Frontiers in robotics and AI. 10.2023, 1206579.

    Research output: Contribution to journal › Article › Research › peer-review

  58. E-pub ahead of print

    3D Printing of Covalent Adaptable Networks: Overview, Applications and Future Prospects

    Bijalwan, V., Rana, S., Singh, H. K., Yun, G. J., Jamil, M. & Schlögl, S., 30 Jun 2023, (E-pub ahead of print) In: Polymer reviews. 64.2024, 1, p. 36-79 44 p.

    Research output: Contribution to journal › Review article › peer-review

  59. E-pub ahead of print

    Digital light processing 3D printing of dynamic magneto-responsive thiol-acrylate composites

    Cazin, I., Rossegger, E., Roppolo, I., Sangermano, M., Granitzer, P., Rumpf, K. & Schlögl, S., 9 Jun 2023, (E-pub ahead of print) In: RSC Advances. 13.2023, 26, p. 17536-17544 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Spatially resolved photoactivation of dynamic exchange reactions in 3D-printed thiol-ene vitrimers

    Reisinger, D., Hellmayr, A., Paris, M., Haas, M., Grießer, T. & Schlögl, S., 7 Jun 2023, In: Polymer Chemistry. 14.2023, 26, p. 3082-3090 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    The effect of photolatent catalysts on the exchange kinetics of dual-wavelength 3D printable and photopatternable thiol-click vitrimers

    Rossegger, E., Shaukat, U., Moazzen, K., Fleisch, M., Berer, M. & Schlögl, S., 2 May 2023, In: Polymer Chemistry. 14.2023, 21, p. 2640-2651 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. E-pub ahead of print

    Crosslinking of XNBR latex with multifunctional epoxides: An energy-efficient curing strategy for the fabrication of accelerator-free rubber gloves

    Grabmayer, T., Manhart, J. C., Kaiser, S., Schaller, R., Holzner, A. & Schlögl, S., 19 Apr 2023, (E-pub ahead of print) In: Journal of applied polymer science. 140.2023, 25, 12 p., e53973.

    Research output: Contribution to journal › Article › Research › peer-review

  63. E-pub ahead of print

    Chiral-based mechanical metamaterial with tunable normal-strain shear coupling effect

    Fleisch, M., Thalhamer, A., Meier, G., Huber, P., Fuchs, P., Pinter, G. G., Schlögl, S. & Berer, M., 15 Mar 2023, (E-pub ahead of print) In: Engineering Structures. 284.2023, 1 June, 15 p., 115952.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Thermally Latent Bases in Dynamic Covalent Polymer Networks and their Emerging Applications

    Reisinger, D., Kriehuber, M. U., Bender, M., Bautista-Anguís, D., Rieger, B. & Schlögl, S., 14 Mar 2023, In: Advanced materials. 35.2023, 24, 27 p., 2300830.

    Research output: Contribution to journal › Article › Research › peer-review

  65. E-pub ahead of print

    Soft dielectric actuator produced by multi-material fused filament fabrication 3D printing

    Raguž, I., Berer, M., Fleisch, M., Holzer, C., Brancart, J., Vanderborght, B. & Schlögl, S., 6 Mar 2023, (E-pub ahead of print) In: Polymers for Advanced Technologies. 34.2023, 6, p. 1967-1978 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Sustainable Bio-Based UV-Cured Epoxy Vitrimer from Castor Oil

    Bergoglio, M., Reisinger, D., Schlögl, S., Grießer, T. & Sangermano, M., 18 Feb 2023, In: Polymers. 15.2023, 4, 12 p., 1024.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Accelerated Thermo-Catalytic Degradation of Perfluoropolyether (PFPE) Lubricants for Space Applications

    Gleirscher, M., Wolfberger, A., Schlögl, S., Hołyńska, M. & Hausberger, A., 14 Feb 2023, In: Lubricants. 11.2023, 2, 15 p., 81.

    Research output: Contribution to journal › Article › Research › peer-review

  68. E-pub ahead of print

    Implementation of thermo-responsive polymer coatings for an early warning against critical temperature states of thermo-sensitive electronic devices with metal oxide (MOx) gas sensors

    Bautista-Anguís, D., Wolfberger, A., Rabe, M., Tomaszczyk, S. & Schlögl, S., 14 Feb 2023, (E-pub ahead of print) In: Progress in organic coatings. 178.2023, May, 11 p., 107444.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    A pyrrole–carbazole photoinitiator for radical and cationic visible light LED photopolymerization

    Li, Y., Shaukat, U., Schlögl, S., Xue, T., Li, J., Nie, J. & Zhu, X., 3 Jan 2023, In: European polymer journal. 182.2023, 3 January, 7 p., 111700.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Wavelength Selective Multi-Material 3D Printing of Soft Active Devices Using Orthogonal Photoreactions

    Rossegger, E., Strasser, J., Höller, R., Fleisch, M., Berer, M. & Schlögl, S., Jan 2023, In: Macromolecular rapid communications. 44.2023, 2, 9 p., 2200586.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Development and characterisation of vitrimer-like elastomers and elastomeric composites from HXNBR rubber

    Grabmayer, T., Kaiser, S., Pilz, G., Kern, W. & Schlögl, S., 2023.

    Research output: Contribution to conference › Poster › Research

  72. Published

    Development and characterization of functional coating to improve the friction behavior of thermoplastic surfaces

    Gleirscher, M., Kopp, M., Hausberger, A., Lackner, J. & Schlögl, S., 2023.

    Research output: Contribution to conference › Poster › Research

  73. Published

    Development of reprocessable adhesive systems for carbon and glass fiber reinforced plastics applications

    Bautista-Anguís, D., Reiner, L., Wolfberger, A., Maar, S., Röper, F., Wolfahrt, M., Schlögl, S. & Hader-Kregl, L., 2023.

    Research output: Contribution to conference › Poster › Research

  74. Published

    Development of reprocessable adhesive systems for carbon and glass fiber reinforced polymer applications

    Bautista-Anguís, D., Reiner, L., Wolfberger, A. & Schlögl, S., 2023.

    Research output: Contribution to conference › Poster › Research

  75. Published

    Digital light processing 3D printing of dynamic magneto-responsive thiol-acrylate composites

    Cazin, I., Rossegger, E., Roppolo, I., Sangermano, M., Granitzer, P., Rumpf, K. & Schlögl, S., 2023.

    Research output: Contribution to conference › Poster › Research

  76. Published

    Frontal Polymerization of Dynamic Networks

    Schmidleitner, C., Hirner, S., Reisinger, D., Schlögl, S. & Rossegger, E., 2023.

    Research output: Contribution to conference › Poster › Research

  77. Published

    Implementation and investigation of a vitrimer-like behavior in HXNBR elastomer and elastomer composites

    Grabmayer, T., Kaiser, S., Jandl, J., Novak, P., Wurzer, S., Kern, W. & Schlögl, S., 2023.

    Research output: Contribution to conference › Poster › Research

  78. Published

    Sequentiaql orthogonality by [2+2] cycloadditions in dual-cure photopolymers

    Müller, S. M., Nelson, B., Naderer, C., Sivun, D., Jacak, J., Schlögl, S. & Griesser, T., 2023.

    Research output: Contribution to conference › Poster › Research

  79. Published

    Sustainable bio-based UV-cured epoxy vitrimer from castor oil

    Bergoglio, M., Reisinger, D., Schlögl, S., Griesser, T. & Sangermano, M., 2023.

    Research output: Contribution to conference › Poster › Research

  80. Published

    Synthesis and Characterization of a Bio-Based Transesterification Catalyst for Green Photopolymers

    Sölle, B., Schlögl, S. & Rossegger, E., 2023.

    Research output: Contribution to conference › Poster › Research

  81. Published

    Synthesis and characterization of magnetic pholopolymers for nanoimprint lithography

    Schmidleitner, C., Schlögl, S., Trimmel, G. & Rossegger, E., 2023.

    Research output: Contribution to conference › Poster › Research

  82. Published

    Synthesis and characterization of magnetic photopolymers for nanoimprint lithography

    Schmidleitner, C., Schlögl, S., Trimmel, G. & Rossegger, E., 2023.

    Research output: Contribution to conference › Poster › Research

  83. 2022
  84. E-pub ahead of print

    Vat photopolymerization 3D printing with light-responsive thiol-norbornene photopolymers

    Rossegger, E., Li, Y., Frommwald, H. & Schlögl, S., 9 Dec 2022, (E-pub ahead of print) In: Monatshefte fur Chemie. 154.2023, 5, p. 473-480 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Vat Photopolymerization 3D-Printing of Dynamic Thiol-Acrylate Photopolymers Using Bio-Derived Building Blocks

    Shaukat, U., Sölle, B., Rossegger, E., Rana, S. & Schlögl, S., 8 Dec 2022, In: Polymers. 14.2022, 24, 14 p., 5377.

    Research output: Contribution to journal › Article › Research › peer-review

  86. E-pub ahead of print

    Blocked Phosphates as Photolatent Catalysts for Dynamic Photopolymer Networks

    Dertnig, C. A., Guedes de la Cruz, G. D. C., Neshchadin, D., Schlögl, S. & Grießer, T., 24 Nov 2022, (E-pub ahead of print) In: Angewandte Chemie - International Edition. 62.2022, 10, 5 p., e202215525.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Self-healable fiber-reinforced vitrimer composites: overview and future prospects

    Sharma, H., Rana, S., Singh, P., Hayashi, M., Binder, W. H., Rossegger, E., Kumar, A. & Schlögl, S., 14 Nov 2022, In: RSC Advances. 12.2022, 50, p. 32569-32582 14 p.

    Research output: Contribution to journal › Review article › peer-review

  88. Published

    Peroxide-Based Crosslinking of Solid Silicone Rubber, Part I: Insights into the Influence of Dicumylperoxide Concentration on the Curing Kinetics and Thermodynamics Determined by a Rheological Approach

    Azevedo, M., Monks, A. M., Kerschbaumer, R. C., Schlögl, S. & Holzer, C., 18 Oct 2022, In: Polymers. 14.2022, 20, 22 p., 4404.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Chalcones as sequential λ-orthogonal crosslinkers in dual-cure photopolymers

    Müller, S. M., Nelson, B., Schlögl, S. & Grießer, T., 21 Sept 2022.

    Research output: Contribution to conference › Presentation › Research

  90. Published

    Assessment of Epoxy Functionalized Poly(dimethylsiloxane) Vitrimers Catalyzed with Covalently Attached Amines as Reversible Adhesives

    Wanghofer, F., Wolfberger, A., Oreski, G. & Schlögl, S., Sept 2022, In: Macromolecular materials and engineering. 307.2022, 9, 9 p., 2200237.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Spatially controlling the mechanical properties of 3D printed objects by dual-wavelength vat photopolymerization

    Cazin, I., Gleirscher, M. O., Fleisch, M., Berer, M., Sangermano, M. & Schlögl, S., Sept 2022, In: Additive Manufacturing. 57.2022, September, 9 p., 102977.

    Research output: Contribution to journal › Article › Research › peer-review

  92. E-pub ahead of print

    3D Printing of Soft Magnetoactive Devices with Thiol-Click Photopolymer Composites

    Rossegger, E., Höller, R., Hrbinič, K., Sangermano, M., Griesser, T. & Schlögl, S., 26 Jul 2022, (E-pub ahead of print) In: Advanced engineering materials. 25.2022, 7, 9 p., 2200749.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Effect of a Dicycloaliphatic Epoxide on the Thermo-Mechanical Properties of Alkyl, Aryl Epoxide Monomers Cured via UV-Induced Cationic Frontal Polymerization

    Malik, M. S., Wolfahrt, M., Sangermano, M. & Schlögl, S., Jul 2022, In: Macromolecular materials and engineering. 307.2022, 7, 10 p., 2100976.

    Research output: Contribution to journal › Article › Research › peer-review

  94. E-pub ahead of print

    Recent Advances in Type I Photoinitiators for Visible Light Induced Photopolymerization

    Müller, S. M., Schlögl, S., Wiesner, T., Haas, M. & Grießer, T., 27 Jun 2022, (E-pub ahead of print) In: ChemPhotoChem . 6.2022, 11, 13 p., e202200091.

    Research output: Contribution to journal › Review article › peer-review

  95. Published

    A Review of Multi-Material 3D Printing of Functional Materials via Vat Photopolymerization

    Shaukat, U., Rossegger, E. & Schlögl, S., 16 Jun 2022, In: Polymers. 14.2022, 12, 69 p., 2449.

    Research output: Contribution to journal › Review article › peer-review

  96. E-pub ahead of print

    Asymmetric chiral and antichiral mechanical metamaterials with tunable Poisson's ratio

    Fleisch, M., Thalhamer, A., Meier, G., Fuchs, P. F., Pinter, G., Schlögl, S. & Berer, M., 7 Jun 2022, (E-pub ahead of print) In: APL Materials. 10.2022, 6, 17 p., 061105.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Streamlined concept towards spatially resolved photoactivation of dynamic transesterification in vitrimeric polymers by applying thermally stable photolatent bases

    Reisinger, D., Dietliker, K., Sangermano, M. & Schlögl, S., 7 Mar 2022, In: Polymer Chemistry. 13.2022, 9, p. 1169-1176 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Hybrid In Situ Reinforcement of EPDM Rubber Compounds Based on Phenolic Novolac Resin and Ionic Coagent

    Strohmeier, L., Balasooriya, W., Schrittesser, B., van Duin, M. & Schlögl, S., 25 Feb 2022, In: Applied Sciences : open access journal. 12.2022, 5, 17 p., 2432.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Influence of morphology and chemical surface composition on electrical conductivity of SiC microspheres

    Pleșa, I., Radl, S., Schichler, U., Ramsauer, F., Ladstätter, W., Bergmann, I., Kern, W. & Schlögl, S., Jan 2022, In: Surface Science. 715.2022, January, 11 p., 121942.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    A “close-then-heal” approach based on shape memory effect to improve the healing efficiency of thiolacrylate dynamic networks

    Alabiso, W., Hron, T., Reisinger, D., Bautista-Anguís, D. & Schlögl, S., 2022.

    Research output: Contribution to conference › Poster › Research

  101. Published

    Addressing the challenges in frontal curing of high-performance carbon fiber reinforced composites

    Malik, M. S., Grasser, V., Wolfahrt, M., Schlögl, S. & Pinter, G. G., 2022, Proceedings of the 20th European Conference on Composite Materials - Composites Meet Sustainability. Vol. Vol. 1 - 6. p. 587 593 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Advancing photocurable resin formulations for dual-wavelength digital light processing 3D printing

    Sebalj, N., Cazin, I., Schlögl, S., Berer, M., Sangermano, M. & Fleisch, M., 2022.

    Research output: Contribution to conference › Poster › Research

  103. Published

    A photolatent organophosphate for the local activation of dynamic exchange reactions in 3D printed photopolymers

    Dertnig, C. A., Guedes de la Cruz, G. D. C., Neshchadin, D., Schlögl, S. & Grießer, T., 2022.

    Research output: Contribution to conference › Poster › Research

  104. Published

    Chalcone [2+2] cycloaddition for λ-orthogonal dual-cure photopolymers

    Müller, S. M., Nelson, B., Schlögl, S. & Grießer, T., 2022.

    Research output: Contribution to conference › Poster › Research

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (292)