Ronald Schnitzer

51 - 100 out of 141Page size: 50

Research output

  1. 2020
  2. Published

    Continuous Cooling Transformation Diagrams of 2.25Cr-1Mo-0.25V Submerged-Arc Weld Metal and Base Metal

    Schönmaier, H., Loder, B., Fischer, T., Grimm, F., Krein, R., Schmitz-Niederau, M. & Schnitzer, R., Aug 2020, In: Metals : open access journal . 10, 8, p. 1-19 19 p., 1055.

    Research output: Contribution to journal › Article › Research › peer-review

  3. E-pub ahead of print

    The role of Ti and TiC nanoprecipitates in radiation resistant austenitic steel: A nanoscale study

    Cautaerts, N., Deville, R., Stergar, E., Pakarinen, J., Verwerft, M., Yang, Y., Hofer, C., Schnitzer, R., Lamm, S., Felfer, P. & Schryvers, D., 10 Jul 2020, (E-pub ahead of print) In: Acta materialia. 197.2020, 15 September, p. 184-197 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Determination of Martensite Start Temperature of High‐Speed Steels Based on Thermodynamic Calculations

    Platl, J., Leitner, H., Turk, C. & Schnitzer, R., 27 May 2020, In: Steel research international. 91.2020, 8, 8 p., 2000063.

    Research output: Contribution to journal › Article › Research › peer-review

  5. E-pub ahead of print

    Characterization of carbides in Q&P steels using a combination of high-resolution methods

    Ebner, S., Schnitzer, R., Suppan, C., Stark, A., Liu, H. & Hofer, C., 2 Mar 2020, (E-pub ahead of print) In: Materials characterization. 163.2020, May, 11 p., 110242.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Microstructural characterization of a double pulse resistance spot welded 1200 Mpa TBF steel

    Stadler, M., Gruber, M., Schnitzer, R. & Hofer, C., 1 Feb 2020, In: Welding in the world. 64.2020, 2, p. 335-343 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    Precipitation reactions in a Cu-Ni-Al medium carbon alloyed dual hardening steel

    Hofinger, M., Turk, C., Ognianov, M., Leitner, H. & Schnitzer, R., 9 Jan 2020, (E-pub ahead of print) In: Materials characterization. 160.2020, February, 9 p., 110126.

    Research output: Contribution to journal › Review article › peer-review

  8. Published

    Etching methods for the microstructural characterization of a heat resistant 2.25Cr-1Mo-0.25V weld metal

    Schönmaier, H., Pölzgutter, M. & Schnitzer, R., 7 Jan 2020, In: Practical metallography = Praktische Metallographie. 57.2020, 1, p. 5-30 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Defect and microstructure characterization of laser powder bed fused tool steels

    Platl, J., Schnitzer, R., Leitner, H. & Turk, C., 2020, Proceedings of Metal Additive Manufacturing Conference 2020.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. 2019
  11. E-pub ahead of print

    Microstructural evolution of 2.25Cr-1Mo-0.25V submerged-arc weld metal

    Schönmaier, H., Grimm, F., Krein, R., Kirchheimer, K. & Schnitzer, R., 14 Dec 2019, (E-pub ahead of print) In: Welding in the world. 64.2020, 2, p. 379-393 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Thermomechanical fatigue testing of dual hardening tool steels

    Hofinger, M., Seisenbacher, B., Ognianov, M., Leitner, H., Turk, C., Kapp, M. & Schnitzer, R., 19 Nov 2019, In: Steel research international. p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Early Stages of Precipitate Formation in a Dual Hardening Steel * Frühe Stadien der Ausscheidungsbildung eines dualhärtenden Stahls

    Hofinger, M., Ognianov, M., Turk, C., Leitner, H. & Schnitzer, R., 31 Oct 2019, In: HTM - journal of heat treatment and materials . 74.2019, 5, p. 293-301 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Influence of quenching conditions on texture and mechanical properties of ultra-high strength steels

    Esterl, R., Sonnleitner, M., Weißensteiner, I., Hartl, K. & Schnitzer, R., 5 Jul 2019, In: Journal of materials science. 54.2019, 19, p. 12875-12886 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Verfahren zum Herstellen eines Gegenstands aus einem Maraging-Stahl

    Schnitzer, R. (Inventor) & Leitner, H. (Inventor), 27 Jun 2019, IPC No. C22C 38/ 50 A I, Patent No. DE102017131219, Priority date 22 Dec 2017, Priority No. DE201710131219

    Research output: Patent

  16. Published

    VERFAHREN ZUM HERSTELLEN EINES GEGENSTANDS AUS EINEM MARAGING-STAHL

    Schnitzer, R. (Inventor) & Leitner, H. (Inventor), 27 Jun 2019, IPC No. C22C 38/ 50 A I, Patent No. WO2019121866, Priority date 22 Dec 2017, Priority No. DE201710131219

    Research output: Patent

  17. Published

    Formation of "carbide-free zones" resulting from the interplay of C redistribution and carbide precipitation during bainitic transformation

    Klein, T., Hofer, C., Lukas, M., Wojcik, T., Schnitzer, R., Galler, M. & Ressel, G., 23 Jun 2019, In: Materialia. 7.2019, September, 100380.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Influences of Thermomechanical Treatment and Nb Micro-alloying on the Hardenability of Ultra-High Strength Steels

    Esterl, R., Sonnleitner, M. & Schnitzer, R., 29 Apr 2019, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 50.2019, 7, p. 3238 - 3245 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Microstructural Analysis of the Recrystallization Behavior of Low Alloyed Steels

    Esterl, R., Sonnleitner, M. & Schnitzer, R., 1 Mar 2019, In: Steel research international. 90.2019, 3, 10 p., 1800500.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Microstructural evolution of a dual hardening steel during heat treatment

    Hofinger, M., Staudacher, M., Ognianov, M., Turk, C., Leitner, H. & Schnitzer, R., 10 Feb 2019, In: Micron. 120.2019, May, p. 48-56 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Austenite decomposition and carbon partitioning during quenching and partitioning heat treatments studied via in-situ X-ray diffraction

    Ebner, S., Suppan, C., Stark, A., Schnitzer, R. & Hofer, C., 2019, In: Materials and Design. 178.2019, September, 107862.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Frühere Stadien der Ausscheidungsbildung eines dualhärtenden Stahls

    Hofinger, M., Ognianov, M., Turk, C., Leitner, H. & Schnitzer, R., 2019, ASMET Werkstofftechniktagung 2019 & 31. Härtereitagung. p. 102-106

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Influence of V and Nb Micro-Alloying on Direct Quenched and Tempered Ultra-High Strength Steels

    Esterl, R., Schnitzer, R., Sonnleitner, M. & Gschöpf, B., 2019, In: Steel research international. 90.2019, 9 p., 800640.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Thermo-mechanical fatigue testing of dual hardening tool steels

    Hofinger, M., Seisenbacher, B., Ognianov, M., Leitner, H., Turk, C., Kapp, M. & Schnitzer, R., 2019.

    Research output: Contribution to conference › Abstract

  25. 2018
  26. Published

    Influence of inhomogeneity on several length scales on the local mechanical properties in V-alloyed all-weld metal

    Haslberger, P., Ernst, W., Schneider, C., Holly, S. & Schnitzer, R., 13 Aug 2018, In: Welding in the world. 62.2018, 6, p. 1153-1158 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. E-pub ahead of print

    Microstructure and mechanical properties of a low C steel subjected to bainitic of quenching and partitioning heat treatments

    Ebner, S., Suppan, H., Schnitzer, R. & Hofer, C., 10 Aug 2018, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Precipitates in microalloyed ultra-high strength weld metal studied by atom probe tomography

    Haslberger, P., Holly, S., Ernst, W. & Schnitzer, R., 3 Apr 2018, In: Welding in the world. 62.2018, June, p. 713-719 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Development of high-strength welding consumables using calculations and microstructural characterisation

    Holly, S., Haslberger, P., Zügner, D., Schnitzer, R. & Kozeschnik, E., 14 Feb 2018, In: Welding in the world. 62.2018, 3, p. 451-458 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Microstructure and mechanical properties of high-strength steel welding consumables with a minimum yield strength of 1100 MPa

    Haslberger, P., Holly, S., Ernst, W. & Schnitzer, R., 24 Jan 2018, In: Journal of materials science. 53.2018, May, p. 6968-6979 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    A high-resolution sight on the compositional differences of proeutectoid- and pearlitic cementite

    Landefeld, A. & Schnitzer, R., 2018.

    Research output: Contribution to conference › Poster › Research

  32. Published

    Computational Analysis of the yield stress of ultra-high strength all-weld metals

    Zügner, D., Holly, S., Ernst, W., Schnitzer, R. & Kozeschnik, E., 2018, 12th International Seminar on Numerical Analysis of Weldability.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Correlation of heat treatment parameters, microstructure and mechanical properties of 3rd generation AHSS

    Ebner, S., Suppan, C., Schnitzer, R. & Hofer, C., 2018.

    Research output: Contribution to conference › Poster › Research

  34. Published

    Microstructural Characterization of Ultra-High Strength Martensitic Steels

    Esterl, R., Sonnleitner, M., Stadler, M., Wölger, G. & Schnitzer, R., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 4, p. 203-222 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Multi-Scale Microstructural Characterization: The Role of Classic and High-Resolution Metallography in the Developement of Modern High-Performance Materials

    Schnitzer, R., Hofer, C., Mayer, S., Panzenböck, M., Holec, D. & Clemens, H., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 9, p. 584-602 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Skalenübergreifende Gefügechatakterisierung - Die Rolle der klassischen und hochauflösenden Metallographie bei der Entwicklung moderner Hochleistungswerkstoffe

    Schnitzer, R., Hofer, C., Mayer, S., Panzenböck, M., Holec, D. & Clemens, H., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 23-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. 2017
  38. Published

    Microstructural Characterization of Martensitic All-Weld Metal Samples

    Haslberger, P., Holly, S., Ernst, W. & Schnitzer, R., 31 Jul 2017, In: Practical metallography = Praktische Metallographie. 54.2017, 8, p. 513-532 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Metallurgical approach for the development of a hot crack-resistant metal-cored wire

    Holly, S., Schnitzer, R., Posch, G., Bruckner, J. & Presoly, P., 2 Mar 2017, In: Welding in the world. 61.2017, May, p. 423-434 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. E-pub ahead of print

    Influence of alloying elements on the mechanical properties of high-strength weld metal

    Schnitzer, R., Zügner, D., Haslberger, P., Ernst, W. & Kozeschnik, E., 12 Jan 2017, (E-pub ahead of print) In: Science and Technology of Welding and Joining. 22.2017, 6, p. 536–543 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Influence of Heat Treatment on Microstructure Stability and Mechanical Properties of a Carbide-Free Bainitic Steel

    Hofer, C., Primig, S., Clemens, H., Winkelhofer, F. & Schnitzer, R., 7 Jan 2017, In: Advanced engineering materials. 19.2017, 4, 5 p., 1600658.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Application of Photons and Neutrons for the Characterization and Development of Advanced Steels

    Eidenberger-Schober, E., Schnitzer, R., Zickler, G., Eidenberger-Schober, M., Bischof, M., Staron, P., Leitner, H., Schreyer, A. & Clemens, H., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science : From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 377-394

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  43. Published

    Atom probe study of prior austenite grain bounda-ries of zinc-coated press hardened steel

    Hofer, C., Kurz, T., Clemens, H. & Schnitzer, R., 2017, 2017 CHS2 Conference Proceedings. p. 383-390

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Effect of tempering time on the mechanical properties of P91 flux cored wire weld metal

    Baumgartner, S., Holy, A., Schuler, M., Schnitzer, R. & Enzinger, N., 2017, In: Welding in the world. 61.2017, January, p. 11-19 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    High resolution imaging of martensitic all-weld metal

    Haslberger, P., Ernst, W. & Schnitzer, R., 2017, In: Science and Technology of Welding and Joining. 22.2017, 4, p. 336-342 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Welding of S960MC with undermatching filler material

    Schneider, C., Ernst, W., Schnitzer, R., Staufer, H., Vallant, R. & Enzinger, N., 2017, Proceeding 70th IIW .

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. 2016
  48. Published

    Influence of alloying elements on the mechanical properties of ultra-high strength weld metal

    Schnitzer, R., Zügner, D., Haslberger, P., Ernst, W. & Kozeschnik, E., 12 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  49. Published

    Metallurgical approach of development of a hot crack resistant metal-cored wire

    Stein, H., Schnitzer, R., Posch, G., Bruckner, J. & Presoly, P., Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  50. Published

    Development of the strongest welding consumables

    Schnitzer, R., Zügner, D., Haslberger, P., Holly, S., Ernst, W. & Enzinger, N., 1 Jun 2016, p. 1-28. 28 p.

    Research output: Contribution to conference › Presentation › Research

  51. Published

    Mikrostrukturielle Charakterisierung von ultra-hochfesten Schweißgütern

    Haslberger, P., Ernst, W. & Schnitzer, R., 10 May 2016.

    Research output: Contribution to conference › Presentation › Research

  52. Published

    Influence of alloying elements on the mechanical properties of ultra-high strength weld metal 

    Schnitzer, R., Zügner, D., Haslberger, P., Ernst, W. & Kozeschnnik, E., 1 Mar 2016.

    Research output: Contribution to conference › Presentation › Research

  53. Published

    Austenitic stainless steel bismuth-free flux-cored wires for high-temperature applications

    Westin, E. M., Schnitzer, R., Ciccomascolo, F., Maderthoner, A. & Grönlund, K., 2016, In: Welding in the world. 60, 6, p. 1147-1158 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Creep Rupture Strength of Dissimilar CB2-P92 FCW Joint Welds

    Baumgartner, S., Pahr, H. & Schnitzer, R., 2016, Advances in Materials Technoloy for Fossil Power Plants: Proceedings from the Eighth International Conference Oct 11-14, 2016, Albufeira, Algarve, Portugal. p. 952-962 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    High resolution imaging of martensitic all-weld metal

    Haslberger, P., Ernst, W. & Schnitzer, R., 2016.

    Research output: Contribution to conference › Presentation › Research

Previous 1 2 3 Next
View graph of relations

Contact

Phone: 4200

Latest Research Output

View more (141)