Ronald Schnitzer

101 - 141 out of 141Page size: 100

Research output

  1. 2016
  2. Published

    Microstructural characterization of ultra-high strength steel welds by means of Light Optical Microscopy and Electron Backscatter Diffraction

    Haslberger, P., Weißensteiner, I., Clemens, H., Ernst, W. & Schnitzer, R., 2016.

    Research output: Contribution to conference › Poster › Research

  3. Published

    Mikrostrukturielle Charakterisierung von ultra-hochfesten Schweißgütern

    Haslberger, P., Ernst, W. & Schnitzer, R., 2016, In: Berg- und hüttenmännische Monatshefte : BHM. 161, 7, p. 321-324 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2013
  5. Published

    Comprehensive Investigations of new Filler Materials for Welding of High Strength Steels

    Schnitzer, R., Rauch, R., Ernst, W., Wagner, J., Baumgartner, S., Leitner, M., Stoschka, M., Schlagradl, T., Schneider, R. & Bernhard, C., 2013, Proceedings of the 3rd International Conference. p. 323-332

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Effect of titanium on the solidification and postsolidification microstructure of high-strength steel welds

    Vanovsek, W., Bernhard, C., Fiedler, M. & Schnitzer, R., 2013, In: Welding in the world. 57, p. 665-674

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2012
  8. Published

    Effect of titanium on the solidification and post-solidification microstructure of high-strength steel welds: IIW Doc. II-C-435-11

    Vanovsek, W., Bernhard, C., Fiedler, M. & Schnitzer, R., 2012

    Research output: Non-textual form › Web publication/site › Research

  9. Published

    New developed filler metals for welding of high strength steels

    Schnitzer, R., Leitner, M., Fiedler, M. & Stoschka, M., 2012, Proceedings to the 2nd International Welding and Joining Technologies Congress and 19th Technical Welding Sessions. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Quality testing of high-strength filler metals in regard to technical cracking – Part 1: IIW-II-C-438-11

    Stoschka, M., Leitner, M., Schnitzer, R. & Schörghuber, M., 2012

    Research output: Non-textual form › Web publication/site › Research

  11. Published

    Welding procedure for high strength welds and their microstructural evolution during solidification and cooling: IIW Doc. II-C-436-11

    Vanovsek, W., Schnitzer, R., Schlagradl, T., Schneider, R., Posch, G., Schider, S., Bernhard, C., Leitner, H., Rauch, R., Fiedler, M. & Stoschka, M., 2012

    Research output: Non-textual form › Web publication/site › Research

  12. 2011
  13. Published

    Application of Photons and Neutrons for the Characterization and Development of Advanced Steels

    Eidenberger, E., Schnitzer, R., Zickler, G., Schober, M., Bischof, M., Staron, P., Leitner, H., Schreyer, A. & Clemens, H., 2011, In: Advanced engineering materials. p. 664-673

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Nuovi materiali d´apporto sviluppati per i nouvi acciai ad alto snervamento della voestalpine AG

    Schnitzer, R., Posch, G., Fiedler, M., Strauß, C., Rauch, R., Fössl, T., Böck, B. & Bonalumi, P., 2011, Giornati Nazionali di Saldatura - GNS6. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Structure-Properties Relationship of a Stainless Maraging Steel

    Schnitzer, R., 2011, 125 p.

    Research output: Thesis › Doctoral Thesis

  16. 2010
  17. Published

    Behaviour of a maraging steel under quasi-static and dynamic compressive loading

    Lach, E., Schnitzer, R., Leitner, H., Redjaimia, A. & Clemens, H., 2010, In: International journal of microstructure and materials properties (IJMMP). 5, p. 65-78

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    DIE AUSSCHEIDUNGSKINETIK DER NICKEL-BASIS SUPERLEGIERUNG ATI ALLVAC 718PLUS

    Zickler, G., Schnitzer, R., Radis, R., Kozeschnik, E., Schweins, R., Stockinger, M. & Leitner, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    Effect of Cu on the evolution of precipitation in an Fe-Cr-Ni-Al-Ti maraging steel

    Schnitzer, R., Schober, M., Zinner, S. & Leitner, H., 2010, In: Acta materialia. 58, p. 3733-3741

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Influence of reverted austenite on static and dynamic mechanical properties of a PH 13-8 Mo maraging steel

    Schnitzer, R., Zickler, G., Erhardt, L., Clemens, H., Zinner, S., Thomas, L. & Leitner, H., 2010, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, p. 2065-2070

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Laser-Sealed Fülldraht-Fertigungstechnologie

    Posch, G., Fiedler, M., Bauer, P., Michael, B., Böck, B., Schnitzer, R., Strauss, C. & Moitzi, G., 2010, Join-Ex: Internationaler Fachkongress der Schweiß und Verbindungstechnik. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Modeling of the yield strength of a stainless maraging steel

    Schnitzer, R., Zinner, S. & Leitner, H., 2010, In: Scripta materialia. p. 286-289

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    NEW SAMPLE ENVIRONMENTS FOR IN-SITU MATERIALS SCIENCE SYNCHROTRON RADIATION STUDIES

    Lippmann, T., Fischer, T., Staron, P., Zickler, G., Schnitzer, R., Martins, R. V., Stark, A., Oehring, M., Bergmann, L., dos Santos, J., Pyczak, F., Müller, M., Clemens, H. & Schreyer, A., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Reverted austenite in PH 13-8 Mo maraging steels

    Schnitzer, R., Radis, R., Nöhrer, M., Schober, M., Hochfellner, R., Zinner, S., Povoden-Karadeniz, E., Kozeschnnik, E. & Leitner, H., 2010, In: Materials chemistry and physics (including materials science communications ; an international interdisciplinary journal on science, characterization and processing of advanced materials). p. 138-145

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Splitting phenomenon in the precipitation evolution in an Fe-Ni-Al-Ti-Cr stainless steel

    Leitner, H., Schober, M. & Schnitzer, R., 2010, In: Acta materialia. 58, p. 1261-1269

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    The Precipitation Behavior of Superalloy ATI Allvac 718Plus

    Zickler, G., Radis, R., Schnitzer, R., Kozeschnik, E., Stockinger, M. & Leitner, H., 2010, In: Advanced engineering materials. p. 176-183

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Transformation of reverted austenite in a maraging steel studied by in-situ X-ray diffrcation

    Zickler, G., Schnitzer, R., Lippmann, T. & Leitner, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. 2009
  29. Published

    Initial Stages of Lamellae Formation in High Nb Containing gamma-TiAl Based Alloys

    Cha, L., Scheu, C., Dehm, G., Schnitzer, R. & Clemens, H., 2009, Initial Stages of Lamellae Formation in High Nb Containing gamma-TiAl Based Alloys. Materials Research Society : MRS, p. 153-158

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    In-situ X-ray diffraction study of the transformation of reverted austenite in the maraging steel PH 13-8 Mo

    Zickler, G., Schnitzer, R., Hochfellner, R., Lippmann, T., Zinner, S. & Leitner, H., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    Microstructure and mechanical properties of the superalloy ATI Allvac 718PlusTM

    Zickler, G., Schnitzer, R., Radis, R., Hochfellner, R., Schweins, R., Stockinger, M. & Leitner, H., 2009, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 295-303

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Microstructure Evolution during Aging of two different Stainless Maraging Steels

    Schober, M., Schnitzer, R. & Leitner, H., 2009, Proceedings of the 17th IFHTSE Congress. p. 478-481

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Mikrostrukturelle Charakterisierung von PH 13-8 Mo Maraging-Stählen

    Schnitzer, R., Hochfellner, R., Nöhrer, M., Schober, M., Clemens, H., Zinner, S. & Leitner, H., 2009, In: Practical metallography = Praktische Metallographie. p. 521-536

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    New sample environments for in-situ materials science synchrotron radiation studies

    Lippmann, T., Fischer, T., Staron, P., Zickler, G., Schnitzer, R., Martins, R. V., Stark, A., Oehring, M., Bergmann, L., dos Santos, J., Pyczak, F., Müller, M., Clemens, H. & Schreyer, A., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. Published

    Precipitation evolution in a Ti-free and Ti-containing stainless maraging steel

    Schober, M., Schnitzer, R. & Leitner, H., 2009, In: Ultramicroscopy. p. 553-562

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Reverted Austenite and its Transformation Behaviour during Deformation in a PH 13-8 Mo Maraging Steel

    Schnitzer, R., Zickler, G., Hochfellner, R., Nöhrer, M., Zinner, S. & Leitner, H., 2009, Proceedings of the 17th IFHTSE Congress. p. 462-465

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Structure-Properties relationship of a PH 13-8 MO Maraging Steel

    Schnitzer, R., Zickler, G., Zinner, S. & Leitner, H., 2009, Proceedings of the 8th International Tooling Conference. p. 491-503

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Struktur - Eigenschaftsbeziehungen von Maraging-Stählen

    Schnitzer, R., Zinner, S. & Leitner, H., 2009, Forum für Metallurgie und Werktstofftechnik. p. 42-44

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Transformation of reverted austenite in a maraging steel under external loading: an in-situ X-ray diffraction study using high-energy synchrotron radiation

    Zickler, G., Schnitzer, R., Hochfellner, R., Lippmann, T., Zinner, S. & Leitner, H., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 1566-1573

    Research output: Contribution to journal › Article › Research › peer-review

  40. 2008
  41. Published

    In-situ high-temperature characterisation of intermetallic precipitates in a new nickel-based superalloy

    Zickler, G., Schnitzer, R., Schweins, R. & Leitner, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    In-situ high-temperature characterization of intermetallic precipitates in a new nickel-based superalloy

    Zickler, G., Schnitzer, R., Schweins, R. & Leitner, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Transformation of reverted austenite in a maraging steel under external loading: an in-situ X-Ray diffraction study using high-energy synchrotron radiation

    Zickler, G., Schnitzer, R., Hochfellner, R., Lippmann, T., Zinner, S. & Leitner, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. 2007
  45. Published

    Herstellung lamellarer Gefügetypen in intermetallischen TiAl-Legierungen und deren Charakterisierung

    Schnitzer, R., Chladil, H., Scheu, C., Clemens, H., Bystrzanowski, S., Bartels, A. & Kremmer, S., 2007, In: Practical metallography = Praktische Metallographie. 44, p. 430-443

    Research output: Contribution to journal › Article › Research › peer-review

  46. 2006
  47. Published

    Charakterisierung einer hoch niobhaltigen intermetallischen Titanaluminid-Legierung

    Schnitzer, R., 2006, 93 p.

    Research output: Thesis › Diploma Thesis

  48. Published

    Gefügefeinung einer neuen, hoch niobhaltigen TiAl-Legierung durch Massivtransformation und Wärmebehandlung - Endbericht

    Scheu, C., Schnitzer, R., Chladil, H. & Clemens, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Unterschiedliche lamellare Gefügetypen in intermetallischen TiAl-Legierungen

    Schnitzer, R., Chladil, H., Scheu, C., Clemens, H., Bystrzanowski, S., Bartels, A. & Kremmer, S., 2006, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 59-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. 2005
  51. Published

    Texture characterisation of extruded TiAl

    Chladil, H., Klauber, W. & Schnitzer, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1 2 Next
View graph of relations

Contact

Phone: 4200

Latest Research Output

View more (141)