Robert Danzer

101 - 150 out of 224Page size: 50

Research output

  1. 2011
  2. Published

    Neue Methodik zur Prüfung der Oberflächenfestigkeit keramischer Kugeln

    Danzer, R. & Strobl, S., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  3. Published

    Raman spectroscopic study of phase transitions in undoped morphotropic PbZr1−xTixO3

    Deluca, M., Fukumura, H., Tonari, N., Capiani, C., Hasuike, N., Kisoda, K., Galassi, C., Harima, H. & Danzer, R., 2011, In: Journal of Raman Spectroscopy. 42, p. 488-495

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Schadensanalyse und technische Zuverlässigkeit keramischer Bauteile

    Danzer, R., 2011, Neue Entwicklungen in der Werkstoffprüfung - Herausforderungen an die Kennwertermittlung. p. 77-84

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  5. Published

    Strategies for fracture toughness, strength and reliability optimisation of ceramic-ceramic laminates

    Sestakova, L., Bermejo Moratinos, R., Chlup, Z. & Danzer, R., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 102, p. 613-626

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Strength and fracture analysis of silicon-based components for embedding

    Deluca, M., Bermejo Moratinos, R., Pletz, M., Supancic, P. & Danzer, R., 2011, In: Journal of the European Ceramic Society. 31, p. 549-558

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Strength reliability of 3D low temperature co-fired multilayer ceramics under biaxial loading

    Bermejo Moratinos, R., Supancic, P., Kraleva, I., Morrell, R. & Danzer, R., 2011, In: Journal of the European Ceramic Society. 31, p. 745-753

    Research output: Contribution to journal › Article › Research › peer-review

  8. 2010
  9. Published

    Determination of mechanical properties of brittle materials by using the small punch test and the ball on three balls test

    Rasche, S., Bermejo, R., Kuna, M. & Danzer, R., 1 Dec 2010.

    Research output: Contribution to conference › Paper › peer-review

  10. Published

    Fracture behaviour of low temperature cofired ceramics under biaxial loading: Influence of metal-ceramic internal architecture

    Bermejo, R., Kraleva, I., Morrell, R., Aldrian, F., Supancic, P. & Danzer, R., 1 Dec 2010.

    Research output: Contribution to conference › Paper › peer-review

  11. Published

    Characterisation and modelling of the mechanical reliability of semiconductor components for Printed Circuit Boards

    Bermejo Moratinos, R., Deluca, M., pletz, M., Supancic, P. & Danzer, R., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    Crack Propagation in Layered Ceramics under Flexural Loading

    Bermejo Moratinos, R. & Danzer, R., 2010, Proceedings of the XI International Conference of the European Ceramic Society. p. 98-103

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Failure resistance optimisation in layered ceramics designed with strong interfaces

    Bermejo Moratinos, R. & Danzer, R., 2010, In: Journal of ceramic science and technology. 1, 1, p. 15-20

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Fracture of Ceramics

    Danzer, R., Lube, T., Supancic, P. & Damani, R., 2010, Ceramics Science and Technology. p. 531-575

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  15. Published

    Fracture Statistics for Small Specimens

    Danzer, R. & Supancic, P., 2010, Ceramic Materials and Components for Energy and Environmental Applications. p. 3-11

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  16. Published

    High failure resistance layered ceramics using crack bifurcation and interface delamination as reinforcement mechanisms

    Bermejo Moratinos, R. & Danzer, R., 2010, In: Engineering Fracture Mechanics. 77, p. 2126-2135

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Hot rolling steels and super alloys with silicon nitride tools

    Danzer, R., 2010, Ceramics and composites in extreme environments & for chemical and electrochemical applications : selected papers from the 12th International Ceramics Congress, part of CIMTEC 2010-12th International Ceramics Congress and 5th Forum on New Materials, Montecatini Terme, Italy, June 6 - 11, 2010 ; part D including Symposium CE - Ceramics and Composites in Extreme Environments, Symposium CF - Ceramics for Chemical, Electrochemical and Environmental Applications . p. 92-99 (Advances in science and technology; vol. 65).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Influence of metallisation on the mechanical behaviour of Low Temperature Co-fired Ceramics under biaxial loading

    Bermejo Moratinos, R., Lucie, S., Kraleva, I., Supancic, P. & Danzer, R., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    Influence of Surface Quality on the biaxial Strength of Silicon Nitride

    Harrer, W., Danzer, R. & Supancic, P., 2010, In: Practical metallography = Praktische Metallographie. 42, p. 141-146

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Keramische Verbundwerkstoffe

    Danzer, R. & Lube, T., 2010, In: MP materials testing : Materialprüfung . p. 20-26

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Mechanical characterisation of miniaturised direct inkjet printed 3YTZP specimens for microelectronic applications

    Özkol, E., Wätjen, A., Bermejo Moratinos, R., Deluca, M., Ebert, J., Danzer, R. & Telle, R., 2010, In: Journal of the European Ceramic Society. 30, p. 3145-3152

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Meso-Scale Mechanical Testing Methods for Diamond Composite Materials

    Morrell, R., Danzer, R., Supancic, P., Harrer, W., Puchegger, S. & Peterlik, H., 2010, In: International journal of refractory metals & hard materials. 28, p. 508-515

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Modelling of the ferroic material behaviour of piezoelectrics: Characterisation of temperature-sensitive functional properties

    Grünbichler, H., Kreith, J., Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2010, In: Journal of the European Ceramic Society. 30, p. 249-254

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Optimal strength and fracture toughness of damage tolerant multilayer ceramics

    Bermejo, R., Sestakova, L., Lube, T. & Danzer, R., 2010, 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Raman spectroscopy for the investigation of indentation-induced domain texturing in lead zirconate titanate piezoceramics

    Deluca, M., Bermejo Moratinos, R., Grünbichler, H., Presser, V., Danzer, R. & Nickel, K. G., 2010, In: Scripta materialia. 63, p. 343-346

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Si3N4/SiC Materials based on Preceramic Polymers and Ceramic Powders

    Degenhardt, U., Motz, G., Krenkel, W., Stegner, F., Berroth, K., Harrer, W. & Danzer, R., 2010, Advances in Sintering Science and Technology. p. 379-387

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  27. Published

    Silicon Nitride Materials for Hot-working of High Strength Metal Wires

    Danzer, R. & Lengauer, M., 2010, In: Engineering Failure Analysis. 17, p. 596-606

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Strength and fracture characteristics of metal-piezoceramic multilayers for actuator application

    Grünbichler, H., Deluca, M., Bermejo Moratinos, R., Auer, C. & Danzer, R., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    The Notched Ball Test - A New Strength Test for Ceramic Spheres

    Supancic, P., Danzer, R., Wang, Z., Witschnig, S. & Schöppl, O., 2010, Ceramic Materials and Components for Energy and Environmental Applications. p. 327-335

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  30. 2009
  31. Published

    PROCESS FOR PRODUCING AN IN PARTICULAR POROUS SHAPED CERAMIC BODY AND SHAPED BODY PRODUCED THEREBY

    Simon, R. (Inventor) & Danzer, R. (Inventor), 31 Dec 2009, IPC No. D03D 25/ 00 A I, Patent No. US2009325442, Priority date 13 Sept 2007, Priority No. WO2007AT00434

    Research output: Patent

  32. Published

    VERFAHREN ZUR HERSTELLUNG EINES INSBESONDERE PORÖSEN KERAMISCHEN FORMKÖRPERS UND DAMIT HERGESTELLTER FORMKÖRPER

    Simon, R. (Inventor) & Danzer, R. (Inventor), 27 May 2009, IPC No. C04B 38/ 00 A I, Patent No. EP2061733, Priority date 13 Sept 2007, Priority No. WO2007AT00434

    Research output: Patent

  33. Published

    A New test to Determine the Tensile Strength of Brittle Balls-The Notched Ball Test

    Danzer, R., Supancic, P., Witschnig, S., Polaczek, E. & Morrell, R., 2009, In: Journal of the European Ceramic Society. p. 2447-2459

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Application of the Ball in Three Balls Test in the Development of a High Strength Partially Stabilised Zirconia Ceramic

    Danzer, R., Harrer, W. & Wagner, R., 2009, In: Ceramic forum international (CFI). 86, p. E50-E53

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Der 4-Kugelversuch zur Ermittlung der biaxialen Biegefestigkeit spröder Werkstoffe

    Danzer, R., Supancic, P. & Harrer, W., 2009, Technische keramische Werkstoffe. p. 1-48

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  36. Published

    Development of a Roadmap for Advanced Ceramics

    Danzer, R., Rödel, J., Kounga, A. B. N., Weissenberger-Eibl, M., Koch, D., Bierwisch, A., Rossner, W., Hoffmann, M. J. & Schneider, G., 2009, In: Journal of the European Ceramic Society. p. 1549-1560

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Evaluation of toughness ansiotropy on doped PZT ceramics as a function of load and temperature

    Bermejo Moratinos, R., Grünbichler, H., Kreith, J. & Danzer, R., 2009, Proceedings of the Fourth International Workshop on Direct and Inverse Problems in Piezoelectricity.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Failure Investigation of Forming Rolls made of Si3N4

    Morrell, R., Harrer, W., Danzer, R. & Berroth, K., 2009, Key engineering materials. Vol. 413. p. 304-307 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  39. Published

    Festigkeit und Einsatzgrenzen keramischer Drahtwalzen

    Danzer, R., Harrer, W. & Lengauer, M., 2009, Tagungsband zum Fachsyposium "Keramik für die Walztechnik". p. 95-112

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Fractography of Advanced Ceramics III: Theoretical, Experimental, Review, Basic - Fundamental (Grundlagenforschung)

    Dusza, J., Danzer, R. (Co-editor), Morrell, R. & Quinn, G. D., 2009, Uetikon-Zuerich: Trans Tech Publications. (Key Engineering Materials; vol. 409)

    Research output: Book/Report › Book › Research

  41. Published

    Fracture response of low temperature cofired ceramics

    Bermejo Moratinos, R., kraleva, I., Morrell, R., Aldrian, F., Supancic, P. & Danzer, R., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Fracture response of piezoceramic materials for injection systems

    Grünbichler, H., Bermejo Moratinos, R., Auer, C. & Danzer, R., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Fracture statistics of small specimens

    Supancic, P. & Danzer, R., 2009

    Research output: Book/Report › Commissioned report › Research

  44. Published

    Influence of an Apparent R-curve on Strength and Fracture Statistics of Ceramic Laminates

    Danzer, R., Pascual-Hererro, J. & Lube, T., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 1137-1144

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Influence of the Sample Size on the Results of B3B-Tests

    Harrer, W., Danzer, R., Supancic, P. & Lube, T., 2009, Key engineering materials. Vol. 409. p. 176-184 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  46. Published

    Keramische Verbundwerkstoffe

    Danzer, R. & Lube, T., 2009, Proceedings zu "9. Tagung Gefüge und Bruch". p. 211-220

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Modelling of ferroic material behaviour of piezoelectrics: Characterisation of temperature-sensitive functional properties

    Grünbichler, H., Kreith, J., Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2009, Proceedings of Electroceramics XI: Piezoelectrics, 31.8 - 4.9.2008, Man UK. Freer, R. & Leach, C. (eds.). p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Proceedings zu "9. Tagung Gefüge und Bruch"

    Danzer, R. (Co-editor), 2009, Leoben: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  49. Published

    Schadensanalyse an Profilwalzen aus Siliziumnitrid

    Harrer, W., Morrell, R., Danzer, R. & Berroth, K., 2009, 9. Tagung Gefüge und Bruch. p. P18-P18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Schadensanalyse an Profilwalzen aus Siliziumnitrid

    Harrer, W., Morrell, R., Danzer, R. & Berroth, K., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Strength Tests on Silicon Nitride Balls

    Supancic, P., Danzer, R., Harrer, W., Wang, Z., Witschnig, S. & Schöppl, O., 2009, Key engineering materials. Vol. 413. p. 193-200 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  52. Published

    The Notched Ball Test - A new strenght Test for Ceramic Spheres

    Supancic, P., Danzer, R., Wang, Z., Schöppl, O. & Witschnig, S., 2009

    Research output: Book/Report › Commissioned report › Research

  53. 2008
  54. Published

    VERFAHREN ZUR HERSTELLUNG EINES INSBESONDERE PORÖSEN KERAMISCHEN FORMKÖRPERS UND DAMIT HERGESTELLTER FORMKÖRPER

    Simon, R. (Inventor) & Danzer, R. (Inventor), 20 Mar 2008, Patent No. WO2008031130, Priority date 14 Sept 2006, Priority No. AT20060001529

    Research output: Patent

Previous 1 2 3 4 5 Next
View graph of relations

Latest Research Output

View more (224)