Reinhold Ebner

(Former)

1 - 50 out of 65Page size: 50

Research output

  1. 2022
  2. E-pub ahead of print

    Residual stress distribution of a locally and inductively quenched and tempered 50CrMo4 steel analysed by synchrotron transmission techniques

    Jászfi, V., Prevedel, P., Raninger, P., Todt, J., Mevec, D., Godai, Y., Maawad, E. & Ebner, R., 16 Jul 2022, (E-pub ahead of print) In: Materials & design. 221.2022, September, 9 p., 110936.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2020
  4. Published

    Experimental and Numerical Investigation of the Deformation and Fracture Mode of Microcantilever Beams Made of Cr(Re)/Al2O3 Metal-Matrix Composite

    Weglewski, W., Pitchai, P., Bochenek, K., Bolzon, G., Konetschnik, R., Sartory, B., Ebner, R., Kiener, D. & Basista, M., May 2020, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 51.2020, May, p. 2377-2390 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. 2019
  6. Published

    In situ analysis of the effect of high heating rates and initial microstructure on the formation and homogeneity of austenite

    Eggbauer, A., Lukas, M., Ressel, G., Prevedel, P., Mendez Martin, F., Keckes, J., Stark, A. & Ebner, R., 22 Mar 2019, In: Journal of materials science. 54.2019, 12, p. 9197-9212 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2017
  8. Published

    Phase-field modelling of ternary eutetic solidification in hot dip galvanization

    Mogeritsch, J. P., Ludwig, A., Böttger, B., Angeli, G., Riener, C. K. & Ebner, R., 1 Jan 2017, Proceedings of the 7th International Conference on Coupled Problems in Science and Engineering, COUPLED PROBLEMS 2017. Vol. 2017-January. p. 1171-1182 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Strength of WC-Co hard metals as a function of the effectively loaded volume

    Jonke, M., Klünsner, T., Supancic, P., Harrer, W., Glätzle, J., Barbist, R. & Ebner, R., 2017, In: International journal of refractory metals & hard materials. 64, p. 219-224 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. 2016
  11. Published

    International Conference on Materials, Processing and Product Engineering 2015 (MPPE2015)

    Eck, S., Ludwig, A. & Ebner, R., 14 Apr 2016, In: IOP Conference Series: Materials Science and Engineering. 119.2016, 1, 2 p., 011001.

    Research output: Contribution to journal › Editorial › peer-review

  12. 2014
  13. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014, Tribologie in Industrie und Forschung: Werkstoffe, Konstruktion und Technologie. p. 3-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. 2012
  15. Published

    A finite element model for carburisation of surface densified PM components

    Eck, S., Ishmurzin, A., Wlanis, T., Ebner, R., Hatzenbichler, T. & Planitzer, F., 2012, In: International journal of computational materials science and surface engineering. 5, 1, p. 16-30

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Interaction of heat checks in aluminum pressure casting dies and their effect on fatigue life

    Raninger, P., Ecker, W., Antretter, T., Leindl, M. & Ebner, R., 2012, Key engineering materials. Vol. 488-489. p. 626-629 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  17. 2011
  18. Published

    Effect of specimen size on the tensile strength of WC–Co hard metal

    Klünsner, T., Wurster, S., Supancic, P., Ebner, R., Jenko, M., Glätzle, J., Püschel, A. & Pippan, R., 2011, In: Acta materialia. 59, p. 4244-4252

    Research output: Contribution to journal › Article › Research › peer-review

  19. 2010
  20. Published

    A Numerical study on the fatigue resistance of a coated tool steel

    Schöngrundner, R., Endler, S. B., Daniel, R., Ebner, R., Mitterer, C. & Kolednik, O., 2010, Proceedings of 18th European Conference of Fractue. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    COMPARISON OF BENDING STRENGTH OF WC-CO HARD METAL IN MILLIMETER AND MICROMETER SIZED SPECIMENS

    Pippan, R., Klünsner, T., Wurster, S., Jenko, M., Ebner, R., Supancic, P., Glätzle, J. & Püschel, A., 2010, Fracture of Materials and Structures from Micro to Macro Scale. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    DFT-based stacking fault energy in the Fe-22.5at.%Mn random alloy above room temperature

    Reyes-Huamantinco, A., Ruban, A., Puschnig, P., Wiessner, M., Wiener, J., Ebner, R. & Draxl, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    DFT-based stacking fault energy in the Fe-22.5at.%Mn random alloy above room temperature

    Reyes-Huamantinco, A., Ruban, A., Puschnig, P., Ambrosch-Draxl, C., Wießner, M., Wiener, J. & Ebner, R., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Effect of microstructure on fatigue properties of WC-Co hard metals

    Pippan, R., Klünsner, T., Marsoner, S., Ebner, R., Glätzle, J. & Püschel, A., 2010, In: Procedia Engineering. p. 2001-2010

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Fatigue damage mechanisms and damage evolution near cyclically loaded edges

    Ebner, R., Gruber, P., Ecker, W., Kolednik, O., Krobath, M. & Jesner, G., 2010, In: Bulletin of the Polish Academy of Sciences / Technical sciences. 58, 2, p. 267-279

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Hochtemperatur Röntgendiffraktometrie

    Maier, G. & Ebner, R., 2010, Lösungen der Nanoanalytik Steiermark 2010. p. 209-210

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  27. Published

    Radiofrequenz-Glimmentladungsspektroskopie

    Marsoner, S. & Ebner, R., 2010, Lösungen der Nanoanalytik Steiermark 2010. p. 243-244

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  28. 2009
  29. Published

    Analyse der Rissentwicklung in Zn-Al-Mg-Beschichtungen

    Zunko, H., Hackl, A., Ebner, R., Brisberger, R., Priewasser, F., Riener, C. & Antrekowitsch, H., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 154, p. 334-341

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Bruchverhalten von Werkzeugstählen

    Ebner, R., 2009,

    Gef?ge & Bruch

    .     p. 67-70

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Crack initiation and growth in Chromium Nitride coated tool-steel

    Endler, S. B., Daniel, R., Ebner, R. & Kolednik, O., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Effect of Material Properties on the Thermo-Mechanical Loading and Damage of Pressure Casting Dies – A Numerical Study

    Ecker, W., Leindl, M., Antretter, T., Ebner, R., Siller, I. & Nisslé, S., 2009, Proceedings of the 8th International Tooling Conference. p. 927-939

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Entwicklung eines Testverfahrens zur Untersuchung der Schädigungsentwicklung in einem Stanzwerkzeug

    Gruber, P. J., Hatzenbichler, T., Ecker, W., Jesner, G., Ebner, R. & Kolednik, O., 2009, Entwicklung eines Testverfahrens zur Untersuchung der Schädigungsentwicklung in einem Stanzwerkzeug. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 99-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    High-strength Steel under Monotonic and Cyclic Loading - A Study on the Damage Evolution near the Edge of a Stamping Tool

    Gruber, P. J., Jesner, G., Ebner, R. & Kolednik, O., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 154, p. 205-210

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Investigation on Cracking Behaviour of new Zn-based Coatings on Sheet Steel for Hot Dip Galvanising

    Zunko, H., Hackl, A., Antrekowitsch, H., Ebner, R. & Brisberger, R., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. Published

    Investigations on Cracking Behaviour of Zn-Al-Mg-Coatings on Sheet Steel

    Zunko, H., Ebner, R., Hackl, A., Antrekowitsch, H. & Brisberger, R., 2009, EMC2009 - Volume 3 - General Pyrometallurgy / Process Control Zinc. GDMB, p. 1201-1210

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Loading conditions and damage evolution near the edge of a stamping tool - new experiments and numerical simulations

    Gruber, P. J., Ecker, W., Krobath, M., Marsoner, S., Jesner, G., Ebner, R. & Kolednik, O., 2009, Loading conditions and damage evolution near the edge of a stamping tool - new experiments and numerical simulations. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Untersuchungen zur Eigenspannungs- und Verzugsentstehung von induktiv gefügten artfremden Verbunden

    Höggerl, K., Leitner, H. & Ebner, R., 2009, In: HTM - journal of heat treatment and materials . 5, p. 278-284

    Research output: Contribution to journal › Article › Research › peer-review

  39. 2008
  40. Published

    First-principles study of FexSi (x = 3, 15, 53): bulk and surface

    Zhang, H., Puschnig, P., Ebner, R. & Ambrosch-Draxl, C., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    Local deformation behaviour of high-strength PM-tool steels

    Gruber, P., Jesner, G., Ebner, R. & Kolednik, O., 2008, New Developments on Metallurgy and Applications of High Strength Steels. Vol. 067. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Numerical Investigation of Thermal Cracks in Pressure Die Casting Tools

    Leindl, M., Ecker, W., Antretter, T. & Ebner, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Numerische und experimentelle Untersuchung von Temperaturwechselrissnetzwerken

    Leindl, M., Ecker, W., Ebner, R. & Antretter, T., 2008, Numerische und experimentelle Untersuchung von Temperaturwechselrissnetzwerken. p. 157-174

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Thermal fatigue behaviour of hot-work tool steels: heat check nucleation and growth

    Ebner, R. & Marsoner, S., 2008, In: International journal of microstructure and materials properties (IJMMP). 3, p. 182-194

    Research output: Contribution to journal › Article › Research › peer-review

  45. 2007
  46. Published

    Legierung für Wälzlager

    Rabitsch, R. (Inventor), Peißl, S. K. (Inventor), Ebner, R. (Inventor) & Eglsäer, S. (Inventor), 15 Mar 2007

    Research output: Patent

  47. Published

    Legierung für Wälzlager

    Rabitsch, R. (Inventor), Peissl, S. (Inventor), Ebner, R. (Inventor) & Eglsäer, S. (Inventor), 15 Mar 2007

    Research output: Patent

  48. Published

    Calibration and validation of an elasto-viscoplastic material model for a hot work tool steel used in pressure casting dies

    Ecker, W., Antretter, T. & Ebner, R., 2007, Key engineering materials. Vol. 345-346. p. 685-688 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  49. Published

    Crack initiation and growth in CrN coated tool steels

    Daniel, R., Endler, S., Ebner, R. & Kolednik, O., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Damage evolution in a chromium nitride coated tool steel under monotonic and cyclic loading

    Endler, S. B., Daniel, R., Schöngrundner, R., Ebner, R. & Kolednik, O., 2007, International Symposium on Reactive Sputter Deposition. p. 53-53

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Development of a high chromium martensitic steel proposed for roller bearing application

    Faleschini, M., Peißl, S. K., Mori, G., Ebner, R. & Eglsäer, S., 2007, Development of a high chromium martensitic steel proposed for roller bearing application. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    RPC NANOCOAT 24 Months Report

    Mitterer, C. & Ebner, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  53. Published

    Thermal Diffusivity of the Aluminium Alloy A-17Si-4Cu (A390) in the solid and Liquid States

    Kaschnitz, E. & Ebner, R., 2007, In: International journal of thermophysics. 28, p. 711-722

    Research output: Contribution to journal › Article › Research › peer-review

  54. 2006
  55. Published

    Blood Pump in particular pneumatic heart assist device

    Ebner, R. (Inventor), Kustosz, R. (Inventor), Lackner, J. (Inventor), Major, B. (Inventor), Religa, Z. (Inventor), Stolarzewicz, B. (Inventor), Waldhauser, W. (Inventor) & Wierzchon, T. (Inventor), 18 May 2006, Patent No. PCT/PL2005/000073

    Research output: Patent

  56. Published

    Biocompatibile TiN-based novel nanocrystalline films

    Ebner, R., Lackner, J. M., Waldhauser, W., Major, R., Czarnowska, E., Kustosz, R., Lacki, P. & Major, B., 2006, In: Bulletin of the Polish Academy of Sciences / Technical sciences. 54, p. 167-173

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Characterization of Wear and Surface Reaction Layer Formation on Aerospace Bearing Steel M50 and a Nitrogen-alloyed Stainless Steel

    Peißl, S. K., Leitner, H., Ebner, R., Hutter, H., Krecar, D. & Rabitsch, R., 2006, In: Journal of ASTM international. 3, p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Crystallographic aspects related to advanced tribological multilayers of Cr/CrN and Ti/TiN types produced by pulsed laser deposition (PLD)

    Major, L., Morgiel, J., Major, B., Lackner, J. M., Waldhauser, W., Ebner, R., Nistor, L. & Van Tendeloo, G., 2006, In: Surface & coatings technology. 200, p. 6190-6195

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Damage mechanisms in materials for cold forging dies under loading conditions typical for dies

    Jesner, G., Marsoner, S., Schemmel, I., Haeussler, K., Ebner, R. & Pippan, R., 2006, Proceedings of the 7th International Tooling Conference "Tooling materials and their applications from research to market". Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 29-36

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Intermetallics for Higher, Moderate and Low Temperature Applications (HIMOLO) - Experimental characterisation: preliminary results (f) Grain-size determination and grain orientation measurements using EBSD in a SEM

    Scheu, C., Chladil, H., Clemens, H. & Ebner, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  61. Published

    Intermetallics for Higher, Moderate and Low Temperature Applications (HIMOLO) - Specification of the heat treatment process to abtain massively transformed microstructures and first test

    Scheu, C., Chladil, H., Clemens, H. & Ebner, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  62. Published

    Materials Research at the Materials Center Leoben

    Ebner, R., 2006, In: Advanced engineering materials. 8, p. 1171-1177

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Phasenreaktionen in hochcarbidhaltigen Nickelbasislegierungen

    Jönzen, M., Ebner, R., Leitner, H. & Caliskanoglu, D., 2006, In: HTM - journal of heat treatment and materials . 61, p. 121-127

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 Next
View graph of relations

Latest Research Output

View more (65)