Ralf Schledjewski

(Former)

101 - 150 out of 250Page size: 50

Research output

  1. 2017
  2. Published

    Monitoring of FRPC manufacturing processes

    Schledjewski, R., 15 Nov 2017, p. 359-367. 9 p.

    Research output: Contribution to conference › Paper

  3. Published

    Influence of Cure Monitoring on the Curing Cycle Time and the Associated Economic Impact

    Hueber, C., Konstantopoulos, S., Hergan, P., Höfler, J., Horejsi, K. & Schledjewski, R., 4 Nov 2017, In: Journal of Mineral, Metal and Material Engineering. 2017, 3, p. 58-65 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Permeability Customisation through Preform Manipulation Utilising 3D-Printing Technology

    Tonejc, M., Pletz, M., Fauster, E. & Schledjewski, R., 1 Nov 2017, In: Polymers and Polymer Composites. 25.2017, 9, p. 651-660 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Permeability Customisation Through Preform Manipulation Utilizing 3D-Printing Technology

    Tonejc, M., Pletz, M., Fauster, E. & Schledjewski, R., 1 Nov 2017, In: Polymers & Polymer Composites (Polymers and polymer composites). 25.2017, 9, p. 643-652 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. E-pub ahead of print

    Influence of process pressures on filling behavior of tubular fabrics in bladder-assisted resin transfer molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 30 Oct 2017, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 3.2017, 4, p. 148-158 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Produktionsplanung um Übergang zwischen diskreter und Batch-Fertigung in der Composite Luftfahrt Industrie

    Hueber, C., Fischer, G. & Schledjewski, R., Sept 2017, Logistisches Produktionsmanagement: 4. Wissenschaftlicher Industrielogistik-Dialog in Leoben (WiLD). Zsifkovits, H. E. & Altendorfer-Kaiser, S. (eds.). p. 63-70

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    INFLUENCE OF PROCESSING TEMPERATURES ON THE DEFLECTION OF HYBRID-METAL-CARBON COMPOSITES MADE BY RESIN TRANSFER MOULDING

    Hergan, P., Beter, J., Stelzer, S., Fauster, E. & Schledjewski, R., 25 Aug 2017, Proceedings of the 21st International Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Cascade Injection Procedure for Bladder-assisted Resin Transfer Molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 21 Aug 2017. 11 p.

    Research output: Contribution to conference › Paper › peer-review

  10. Published

    HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding

    Fauster, E., Hergan, P., Stelzer, S., Scheiblhofer, S., Cespedes-Gonzales, G., Pfeifer, S., Rittenschober, B., Sieberer, M., Lauermann, M. & Schledjewski, R., 7 Jul 2017.

    Research output: Contribution to conference › Paper › peer-review

  11. Published

    High performance green composites for green technologies

    Schledjewski, R., Lloret Pertegas, S., Blößl, Y., Anusic, A., Resch-Fauster, K., Mahendran, A. R. & Wuzella, G., 6 Jul 2017, Key Engineering Materials. Trans Tech Publications, Vol. 742. p. 271-277 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Analytical modeling of textile parameters and draping behavior of 2D biaxial braided sleevings

    Schillfahrt, C. & Schledjewski, R., 31 May 2017, In: Polymers & Polymer Composites (Polymers and polymer composites). 25.2017, 5, p. 315-326 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Development of fully bio-based composite materials for structural applications Processing case study based on small sized wind energy turbine blades

    Schledjewski, R. & Blößl, Y., May 2017, Polymer Composites 2017. Foller, B. (ed.). p. 051-053

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Continuous welding of unidirectional fiber reinforced thermoplastic tape material

    Schledjewski, R., 27 Apr 2017, AIP Conference Proceedings. American Institute of Physics, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Modell-Basierte FKV-Verarbeitungstechnik an Beispielen der Flüssigimprägnierverfahren

    Fauster, E., Hergan, P., Thirunavukkarasu, J., Vilaca Lourenco, G. & Schledjewski, R., 21 Apr 2017.

    Research output: Contribution to conference › Poster › Research

  16. Published

    Bio-basierte Verbundwerkstoffe

    Schledjewski, R., Resch-Fauster, K., Anusic, A. & Blößl, Y., Apr 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 7. p. 263-264

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Bio-basierte Verbundwerkstoffe

    Schledjewski, R., Resch-Fauster, K., Anusic, A. & Blößl, Y., Apr 2017.

    Research output: Contribution to conference › Poster › Transfer

  18. Published

    Effiziente Verarbeitung von Verbundwerkstoffen für Luftfahrtanwendungen

    Schledjewski, R., Hueber, C., Konstantopoulos, S., Lloret Pertegas, S. & Tonejc, M., Apr 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 07. p. 261-262 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Effiziente Verarbeitung von Verbundwerkstoffen für Luftfahrtanwendungen

    Schledjewski, R., Hueber, C., Konstantopoulos, S., Lloret Pertegas, S. & Tonejc, M., Apr 2017.

    Research output: Contribution to conference › Poster › Transfer

  20. Published

    Verarbeitung von Verbundwerkstoffen

    Schledjewski, R. & Fauster, E., Apr 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 7. p. 265-266

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Verarbeitung von Verbundwerkstoffen

    Schledjewski, R. & Fauster, E., Apr 2017.

    Research output: Contribution to conference › Poster › Transfer

  22. Published

    Flüssigimprägnierung von Naturfasertextilien im Vergleich mit synthetischen Faserverstärkungen

    Blößl, Y. & Schledjewski, R., 24 Mar 2017.

    Research output: Contribution to conference › Abstract › peer-review

  23. Published

    Hybride Verbundwerkstoffe: Potenziale und Herausforderungen

    Hergan, P., Fauster, E., Stelzer, S., Pinter, G. & Schledjewski, R., 24 Mar 2017.

    Research output: Contribution to conference › Abstract › peer-review

  24. Published

    Comparative study of optimization in pultrusion with pre-heating and die-cooler temperature for improved cure

    Costa Dias, R. D. C., de Sousa Santos, L. & Schledjewski, R., 1 Jan 2017, THERMEC 2016. Ionescu, M., Mishra, B., Kozeschnik, E., Sommitsch, C., Chandra, T. & Mishra, B. (eds.). Trans Tech Publications, p. 402-407 6 p. (Materials Science Forum; vol. 879).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Design and manufacturing of high performance green composites based on renewable materials

    Resch-Fauster, K., Klein, A., Lloret Pertegas, S. & Schledjewski, R., 2017, Handbook of Composites from Renewable Materials, Vol. 2, Design and Manufacturing. Wiley-VCH , p. 1-24

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  26. Published

    Modell-Basierte FKV-Verarbeitungstechnik an Beispielen der Flüssigimprägnierverfahren

    Fauster, E., Hergan, P., Thirunavukkarasu, J., Vilaca Lourenco, G. & Schledjewski, R., 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. 2016
  28. Published

    Liquid Composite Molding: A widely used group of FRPC processing techniques, but still a challenging topic

    Schledjewski, R. & Grössing, H., 1 Nov 2016, Materials Science Forum. Vol. 879. 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Epoxy/glass fibres laminates with integrated layer of carbon tubes decorated by Ag clusters for deformation detection

    Lloret Pertegas, S., Matyas, J., Olejnik, R., Slobodian, P. & Schledjewski, R., Nov 2016.

    Research output: Contribution to conference › Paper

  30. Published

    Model based processing as possibility for quality assured manufacturing with ARTM

    Schledjewski, R., Hergan, P. & Fauster, E., 27 Oct 2016.

    Research output: Contribution to conference › Presentation › Research

  31. Published

    Identification of the effect of typical curvatures encountered in RTM parts on localized permeability of fibrous preforms

    Konstantopoulos, S., Hueber, C., Mühlbachler, E. & Schledjewski, R., 20 Sept 2016, In: Advanced Manufacturing: Polymer and Composites Science. 2.2016, 2, p. 57-66 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Nanostructured CNT based sensing films used in multi-functional hybrid composites

    Schledjewski, R., Lloret Pertegas, S., Matyas, J., Olejnik, R. & Slobodian, P., 15 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  33. Published

    Study on parameters affecting the mechanical properties of dry fiber bundles during continuous composite manufacturing processes

    Schledjewski, R. & Maier, A., 9 Sept 2016, IOP Conference Series: Materials Science and Engineering. Vol. 139(1). 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Study on parameters affecting the mechanical properties of dry fiber bundles during continuous composite manufacturing processes

    Schledjewski, R. & Maier, A., 5 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  35. Published

    Assessing the reliability of filling simulations for RTM: Critical comparison of actual matrix arrival times with simulation predictions

    Schledjewski, R. & Konstantopoulos, S., 28 Jun 2016.

    Research output: Contribution to conference › Presentation › Research

  36. Published

    Assessing the reliability of filling simulations for RTM: Critical comparison of actual matrix arrival times with simulation predictions

    Konstantopoulos, S. & Schledjewski, R., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Automated tape laying (ATL) process simulation through 3d thermos-mechanical model

    Schledjewski, R., Satheesh, B. & Duplesis Kergomard, Y., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Improved cure simulation in pultrusion process about heating systems: A case study

    Costa Dias, R. D. C., Santos, L. S. & Schledjewski, R., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    ROBUST OPTICAL 2D PERMEABILITY CHARACTERIZATION OF REINFORCING FABRICS

    Fauster, E., Grössing, H., Fellner, K. & Schledjewski, R., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Hybrid structures manufactured by using thermoplastic tape placement for local reinforcement build-up

    Schledjewski, R., Satheesh, B. & Duplessis Kergomard, Y., 23 Jun 2016.

    Research output: Contribution to conference › Presentation › Research

  41. Published

    Liquid Composite Molding: A widely used group of FRPC processing techniques, but still a challenging topic

    Schledjewski, R. & Grössing, H., 3 Jun 2016.

    Research output: Contribution to conference › Presentation › Research

  42. Published

    An evaluation of the reproducibility of ultrasonic sensor-based out-of-plane permeability measurements: a benchmarking study

    Becker, D., Grössing, H., Konstantopoulos, S., Fauster, E., Mitschang, P. & Schledjewski, R., 1 Jun 2016, In: Advanced Manufacturing: Polymer and Composites Science. 2.2016, 1, p. 34-45 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Review of cost estimation: methods and models for aerospace composite manufacturing

    Hueber, C., Horejsi, K. & Schledjewski, R., 1 Jun 2016, In: Advanced Manufacturing: Polymer and Composites Science. 2.2016, 1, p. 1-13 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    BOTTOM-UP PARAMETRIC HYBRID COST ESTIMATION FOR COMPOSITE AEROSPACE PRODUCTION

    Hueber, C., Horejsi, K. & Schledjewski, R., Jun 2016, Proceeding of the 17th European Conference on Composite Materials. Munich/ Germany

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Green Composites: Challenges to reach high performance components

    Lloret Pertegas, S., Anusic, A., Resch-Fauster, K. & Schledjewski, R., Jun 2016.

    Research output: Contribution to conference › Paper

  46. Published

    HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding

    Fauster, E., Hergan, P. & Schledjewski, R., 20 Apr 2016, Proceedings of Euro Hybrid 2: Materials and Structures 2016. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Automated profile preforming for structural components

    Fauster, E., Schillfahrt, C., Hueber, C. & Schledjewski, R., 19 Apr 2016, In: Science and Engineering of Composite Materials. 24.2016, 5, p. 631-650 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Assessing the reliability of filling simulations for RTM: Critical comparison of theoretical and realistic permeability of typical curvatures encountered in RTM preforms

    Konstantopoulos, S. & Schledjewski, R., 1 Jan 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Bottom-up parametric hybrid cost estimation for composite aerospace production

    Hueber, C., Horejsi, K. & Schledjewski, R., 1 Jan 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    A model-based concept for an optimized resin transfer moulding process

    Hergan, P., Fauster, E. & Schledjewski, R., 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Vacuum infusion composite manufacturing using integrated carbon nanotubes sensor

    Lloret Pertegas, S., Matyas, J., Slobodian, P. & Schledjewski, R., 2016.

    Research output: Contribution to conference › Paper

  52. 2015
  53. E-pub ahead of print

    Compaction behavior of continuous carbon fiber tows: an experimental analysis

    Kastanis, D., Steiner, H., Fauster, E. & Schledjewski, R., 12 Nov 2015, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 1.2015, 3, p. 169-174 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 Next
View graph of relations

Latest Research Output

View more (250)