Ralf Schledjewski

(Former)

101 - 200 out of 250Page size: 100

Research output

  1. 2017
  2. Published

    Monitoring of FRPC manufacturing processes

    Schledjewski, R., 15 Nov 2017, p. 359-367. 9 p.

    Research output: Contribution to conference › Paper

  3. Published

    Influence of Cure Monitoring on the Curing Cycle Time and the Associated Economic Impact

    Hueber, C., Konstantopoulos, S., Hergan, P., Höfler, J., Horejsi, K. & Schledjewski, R., 4 Nov 2017, In: Journal of Mineral, Metal and Material Engineering. 2017, 3, p. 58-65 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Permeability Customisation through Preform Manipulation Utilising 3D-Printing Technology

    Tonejc, M., Pletz, M., Fauster, E. & Schledjewski, R., 1 Nov 2017, In: Polymers and Polymer Composites. 25.2017, 9, p. 651-660 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Permeability Customisation Through Preform Manipulation Utilizing 3D-Printing Technology

    Tonejc, M., Pletz, M., Fauster, E. & Schledjewski, R., 1 Nov 2017, In: Polymers & Polymer Composites (Polymers and polymer composites). 25.2017, 9, p. 643-652 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. E-pub ahead of print

    Influence of process pressures on filling behavior of tubular fabrics in bladder-assisted resin transfer molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 30 Oct 2017, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 3.2017, 4, p. 148-158 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Produktionsplanung um Übergang zwischen diskreter und Batch-Fertigung in der Composite Luftfahrt Industrie

    Hueber, C., Fischer, G. & Schledjewski, R., Sept 2017, Logistisches Produktionsmanagement: 4. Wissenschaftlicher Industrielogistik-Dialog in Leoben (WiLD). Zsifkovits, H. E. & Altendorfer-Kaiser, S. (eds.). p. 63-70

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    INFLUENCE OF PROCESSING TEMPERATURES ON THE DEFLECTION OF HYBRID-METAL-CARBON COMPOSITES MADE BY RESIN TRANSFER MOULDING

    Hergan, P., Beter, J., Stelzer, S., Fauster, E. & Schledjewski, R., 25 Aug 2017, Proceedings of the 21st International Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Cascade Injection Procedure for Bladder-assisted Resin Transfer Molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 21 Aug 2017. 11 p.

    Research output: Contribution to conference › Paper › peer-review

  10. Published

    HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding

    Fauster, E., Hergan, P., Stelzer, S., Scheiblhofer, S., Cespedes-Gonzales, G., Pfeifer, S., Rittenschober, B., Sieberer, M., Lauermann, M. & Schledjewski, R., 7 Jul 2017.

    Research output: Contribution to conference › Paper › peer-review

  11. Published

    High performance green composites for green technologies

    Schledjewski, R., Lloret Pertegas, S., Blößl, Y., Anusic, A., Resch-Fauster, K., Mahendran, A. R. & Wuzella, G., 6 Jul 2017, Key Engineering Materials. Trans Tech Publications, Vol. 742. p. 271-277 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Analytical modeling of textile parameters and draping behavior of 2D biaxial braided sleevings

    Schillfahrt, C. & Schledjewski, R., 31 May 2017, In: Polymers & Polymer Composites (Polymers and polymer composites). 25.2017, 5, p. 315-326 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Development of fully bio-based composite materials for structural applications Processing case study based on small sized wind energy turbine blades

    Schledjewski, R. & Blößl, Y., May 2017, Polymer Composites 2017. Foller, B. (ed.). p. 051-053

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Continuous welding of unidirectional fiber reinforced thermoplastic tape material

    Schledjewski, R., 27 Apr 2017, AIP Conference Proceedings. American Institute of Physics, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Modell-Basierte FKV-Verarbeitungstechnik an Beispielen der Flüssigimprägnierverfahren

    Fauster, E., Hergan, P., Thirunavukkarasu, J., Vilaca Lourenco, G. & Schledjewski, R., 21 Apr 2017.

    Research output: Contribution to conference › Poster › Research

  16. Published

    Bio-basierte Verbundwerkstoffe

    Schledjewski, R., Resch-Fauster, K., Anusic, A. & Blößl, Y., Apr 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 7. p. 263-264

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Bio-basierte Verbundwerkstoffe

    Schledjewski, R., Resch-Fauster, K., Anusic, A. & Blößl, Y., Apr 2017.

    Research output: Contribution to conference › Poster › Transfer

  18. Published

    Effiziente Verarbeitung von Verbundwerkstoffen für Luftfahrtanwendungen

    Schledjewski, R., Hueber, C., Konstantopoulos, S., Lloret Pertegas, S. & Tonejc, M., Apr 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 07. p. 261-262 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Effiziente Verarbeitung von Verbundwerkstoffen für Luftfahrtanwendungen

    Schledjewski, R., Hueber, C., Konstantopoulos, S., Lloret Pertegas, S. & Tonejc, M., Apr 2017.

    Research output: Contribution to conference › Poster › Transfer

  20. Published

    Verarbeitung von Verbundwerkstoffen

    Schledjewski, R. & Fauster, E., Apr 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 7. p. 265-266

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Verarbeitung von Verbundwerkstoffen

    Schledjewski, R. & Fauster, E., Apr 2017.

    Research output: Contribution to conference › Poster › Transfer

  22. Published

    Flüssigimprägnierung von Naturfasertextilien im Vergleich mit synthetischen Faserverstärkungen

    Blößl, Y. & Schledjewski, R., 24 Mar 2017.

    Research output: Contribution to conference › Abstract › peer-review

  23. Published

    Hybride Verbundwerkstoffe: Potenziale und Herausforderungen

    Hergan, P., Fauster, E., Stelzer, S., Pinter, G. & Schledjewski, R., 24 Mar 2017.

    Research output: Contribution to conference › Abstract › peer-review

  24. Published

    Comparative study of optimization in pultrusion with pre-heating and die-cooler temperature for improved cure

    Costa Dias, R. D. C., de Sousa Santos, L. & Schledjewski, R., 1 Jan 2017, THERMEC 2016. Ionescu, M., Mishra, B., Kozeschnik, E., Sommitsch, C., Chandra, T. & Mishra, B. (eds.). Trans Tech Publications, p. 402-407 6 p. (Materials Science Forum; vol. 879).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Design and manufacturing of high performance green composites based on renewable materials

    Resch-Fauster, K., Klein, A., Lloret Pertegas, S. & Schledjewski, R., 2017, Handbook of Composites from Renewable Materials, Vol. 2, Design and Manufacturing. Wiley-VCH , p. 1-24

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  26. Published

    Modell-Basierte FKV-Verarbeitungstechnik an Beispielen der Flüssigimprägnierverfahren

    Fauster, E., Hergan, P., Thirunavukkarasu, J., Vilaca Lourenco, G. & Schledjewski, R., 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. 2016
  28. Published

    Liquid Composite Molding: A widely used group of FRPC processing techniques, but still a challenging topic

    Schledjewski, R. & Grössing, H., 1 Nov 2016, Materials Science Forum. Vol. 879. 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Epoxy/glass fibres laminates with integrated layer of carbon tubes decorated by Ag clusters for deformation detection

    Lloret Pertegas, S., Matyas, J., Olejnik, R., Slobodian, P. & Schledjewski, R., Nov 2016.

    Research output: Contribution to conference › Paper

  30. Published

    Model based processing as possibility for quality assured manufacturing with ARTM

    Schledjewski, R., Hergan, P. & Fauster, E., 27 Oct 2016.

    Research output: Contribution to conference › Presentation › Research

  31. Published

    Identification of the effect of typical curvatures encountered in RTM parts on localized permeability of fibrous preforms

    Konstantopoulos, S., Hueber, C., Mühlbachler, E. & Schledjewski, R., 20 Sept 2016, In: Advanced Manufacturing: Polymer and Composites Science. 2.2016, 2, p. 57-66 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Nanostructured CNT based sensing films used in multi-functional hybrid composites

    Schledjewski, R., Lloret Pertegas, S., Matyas, J., Olejnik, R. & Slobodian, P., 15 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  33. Published

    Study on parameters affecting the mechanical properties of dry fiber bundles during continuous composite manufacturing processes

    Schledjewski, R. & Maier, A., 9 Sept 2016, IOP Conference Series: Materials Science and Engineering. Vol. 139(1). 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Study on parameters affecting the mechanical properties of dry fiber bundles during continuous composite manufacturing processes

    Schledjewski, R. & Maier, A., 5 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  35. Published

    Assessing the reliability of filling simulations for RTM: Critical comparison of actual matrix arrival times with simulation predictions

    Schledjewski, R. & Konstantopoulos, S., 28 Jun 2016.

    Research output: Contribution to conference › Presentation › Research

  36. Published

    Assessing the reliability of filling simulations for RTM: Critical comparison of actual matrix arrival times with simulation predictions

    Konstantopoulos, S. & Schledjewski, R., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Automated tape laying (ATL) process simulation through 3d thermos-mechanical model

    Schledjewski, R., Satheesh, B. & Duplesis Kergomard, Y., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Improved cure simulation in pultrusion process about heating systems: A case study

    Costa Dias, R. D. C., Santos, L. S. & Schledjewski, R., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    ROBUST OPTICAL 2D PERMEABILITY CHARACTERIZATION OF REINFORCING FABRICS

    Fauster, E., Grössing, H., Fellner, K. & Schledjewski, R., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Hybrid structures manufactured by using thermoplastic tape placement for local reinforcement build-up

    Schledjewski, R., Satheesh, B. & Duplessis Kergomard, Y., 23 Jun 2016.

    Research output: Contribution to conference › Presentation › Research

  41. Published

    Liquid Composite Molding: A widely used group of FRPC processing techniques, but still a challenging topic

    Schledjewski, R. & Grössing, H., 3 Jun 2016.

    Research output: Contribution to conference › Presentation › Research

  42. Published

    An evaluation of the reproducibility of ultrasonic sensor-based out-of-plane permeability measurements: a benchmarking study

    Becker, D., Grössing, H., Konstantopoulos, S., Fauster, E., Mitschang, P. & Schledjewski, R., 1 Jun 2016, In: Advanced Manufacturing: Polymer and Composites Science. 2.2016, 1, p. 34-45 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Review of cost estimation: methods and models for aerospace composite manufacturing

    Hueber, C., Horejsi, K. & Schledjewski, R., 1 Jun 2016, In: Advanced Manufacturing: Polymer and Composites Science. 2.2016, 1, p. 1-13 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    BOTTOM-UP PARAMETRIC HYBRID COST ESTIMATION FOR COMPOSITE AEROSPACE PRODUCTION

    Hueber, C., Horejsi, K. & Schledjewski, R., Jun 2016, Proceeding of the 17th European Conference on Composite Materials. Munich/ Germany

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Green Composites: Challenges to reach high performance components

    Lloret Pertegas, S., Anusic, A., Resch-Fauster, K. & Schledjewski, R., Jun 2016.

    Research output: Contribution to conference › Paper

  46. Published

    HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding

    Fauster, E., Hergan, P. & Schledjewski, R., 20 Apr 2016, Proceedings of Euro Hybrid 2: Materials and Structures 2016. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Automated profile preforming for structural components

    Fauster, E., Schillfahrt, C., Hueber, C. & Schledjewski, R., 19 Apr 2016, In: Science and Engineering of Composite Materials. 24.2016, 5, p. 631-650 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Assessing the reliability of filling simulations for RTM: Critical comparison of theoretical and realistic permeability of typical curvatures encountered in RTM preforms

    Konstantopoulos, S. & Schledjewski, R., 1 Jan 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Bottom-up parametric hybrid cost estimation for composite aerospace production

    Hueber, C., Horejsi, K. & Schledjewski, R., 1 Jan 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    A model-based concept for an optimized resin transfer moulding process

    Hergan, P., Fauster, E. & Schledjewski, R., 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Vacuum infusion composite manufacturing using integrated carbon nanotubes sensor

    Lloret Pertegas, S., Matyas, J., Slobodian, P. & Schledjewski, R., 2016.

    Research output: Contribution to conference › Paper

  52. 2015
  53. E-pub ahead of print

    Compaction behavior of continuous carbon fiber tows: an experimental analysis

    Kastanis, D., Steiner, H., Fauster, E. & Schledjewski, R., 12 Nov 2015, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 1.2015, 3, p. 169-174 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Accurate, Reproducible and Robust In-Plane Permeability Characterization with a Low-Budget Test Rig: A Challenge or Straightforward?

    Grössing, H., Fauster, E. & Schledjewski, R., 29 Oct 2015, SAMPE CAMX, Dallas, Tx, USA, 26.-29.10.2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Hocheffiziente Prozesse: Materialverständnis und Automation als SchlüsselelementeEine Fallbetrachtung

    Schledjewski, R., 16 Oct 2015.

    Research output: Contribution to conference › Presentation › Transfer

  56. Published

    Utilizing Fused Deposition Modeling Techniques in Composite Processing

    Tonejc, M., Grössing, H., Habicher, M., Fauster, E. & Schledjewski, R., 24 Sept 2015, Proceedings Polymer Processing Society Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Optical Permeability Measurement on Tubular Braided Reinforcing Textiles

    Schillfahrt, C., Fauster, E. & Schledjewski, R., Jul 2015, Proceedings of the 20th International Conference on Composite Materials. 12 p. 3406-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Automated Composite Manufacturing by Means of Model Based Process Control

    Schledjewski, R. & Fauster, E., 24 Jun 2015.

    Research output: Contribution to conference › Poster › Research

  59. Published

    Integrated Process Development as a Basis of Highly Efficient FRPC-Processing

    Schledjewski, R., 12 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  60. Published

    Flow Front Advancement during Composite Processing: Predictions from Numerical Filling Simulation Tools in Comparison with Real-World Experiments

    Grössing, H., Fauster, E., Schledjewski, R., Stadlmajer, N. & Fleischmann, M., 5 May 2015, In: Polymer Composites. p. 1-12 DOI 10.1002/pc.23474.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Efficient Manufacturing of Aeronautic CFRP-Structures through Automated Profile Preforming

    Fauster, E., Schillfahrt, C. & Schledjewski, R., 23 Apr 2015.

    Research output: Contribution to conference › Abstract › peer-review

  62. Published

    Numerical Filling Predictions and Mechanical Mould Simulations for Composite Manufacturing Techniques

    Grössing, H., Konstantopoulos, S. & Schledjewski, R., 17 Apr 2015, ESAFORM 2015, Graz, Österreich, 15.-17.04.2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Forming of fiber reinforced polymers

    Schledjewski, R., 16 Apr 2015.

    Research output: Contribution to conference › Presentation › Research

  64. Published

    splineTEX - Industrielle Fertigung von gekrümmten Faserverbundrohren durch Einsatz von Flüssigimprägnierverfahren

    Schillfahrt, C., Fauster, E., Schledjewski, R., Troi, V. & Schennach, O., 6 Mar 2015.

    Research output: Contribution to conference › Paper › peer-review

  65. Published

    Material performance under in situ consolidation conditions during continuous placement processing

    Schledjewski, R., Satheesh, B. & Tonejc, M., 4 Feb 2015.

    Research output: Contribution to conference › Presentation › Research

  66. Published

    Influence of Textile Parameters on the Preform In-Plane Permeability Characteristics of Non-Crimp Fabric Preforms

    Grössing, H., Fauster, E., Schledjewski, R. & Weninger, M., 1 Feb 2015, In: Polymer Composites. p. 1-10 DOI 10.1002/pc.23360.

    Research output: Contribution to journal › Article › Research › peer-review

  67. E-pub ahead of print

    Influence of textile parameters on the in-plane permeability characteristics of non-crimped fabric preforms

    Grössing, H., Fauster, E., Weninger, M. & Schledjewski, R., 23 Jan 2015, (E-pub ahead of print) In: Polymer Composites. 37.2016, 6, p. 1854-1863 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Automated Profile Preforming for Aerospace Applications

    Schillfahrt, C., Fauster, E. & Schledjewski, R., Jan 2015, In: JEC Composites Magazine. 94, p. 43-45 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Accurate, reproducible and robust in-plane permeability characterization with a lowbudget test rig: A challenge or straightforward?

    Grössing, H., Fauster, E. & Schledjewski, R., 2015, p. 267-283. 17 p.

    Research output: Contribution to conference › Paper › peer-review

  70. Published

    A Comparison of two Measurement Techniques for Determining the 2D Permeability Characteristics of Reinforcing Textiles

    Fauster, E., Grössing, H. & Schledjewski, R., 2015, Proceedings of the 20th International Conference of Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    An Evaluation of the Reproducibility of Capacitive Sensor Based In-Plane Permeability Measurements: A Benchmarking Study

    Grössing, H., Schledjewski, R., Kaufmann, S., Mitschang, P. & Becker, D., 2015, In: Express Polymer Letters. 9, p. 129-142

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    A Study on Geometrical Parameters Influencing the Mechanical Spreading of Fibre Bundles

    Tonejc, M., Steiner, H., Fauster, E., Konstantopoulos, S. & Schledjewski, R., 2015, Proceedings of the 20th International Conference of Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Enabling RTM processing of components with varying wall thickness: Accurate transverse Permeability measurements under unsaturated flow conditions

    Konstantopoulos, S., Hergan, P., Grössing, H. & Schledjewski, R., 2015.

    Research output: Contribution to conference › Paper › peer-review

  74. Published

    Exploiting temperature measurements for cure monitoring of FRP composites. Applications with thermocouples and Infrared thermography

    Konstantopoulos, S., Tonejc, M., Maier, A. & Schledjewski, R., 2015, In: Journal of Reinforced Plastics and Composites. 34, 12, p. 1015 1026 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Influence of Test Rig Configuation and Evaluation Algorithms on Optical Radial-Flow Permeability Measurement: A Benchmark Exercise

    Berg, D. C., Fauster, E., Abliz, D., Grössing, H., Meiners, D., Schledjewski, R. & Ziegmann, G., 2015, Proceedings of the 20th International Conference of Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Influence of test rig configuration and evaluation algorithms on optical radial-flow permeability measurement: A benchmark exercise

    Berg, D. C., Fauster, E., Abliz, D., Grössing, H., Meiners, D., Schledjewski, R. & Ziegmann, G., 2015.

    Research output: Contribution to conference › Paper › peer-review

  77. Published

    Numerical Filling Predictions and Mechanical Mold Simulations for Composite Manufacturing Techniques: RTM Tool Development

    Grössing, H., Konstantopoulos, S. & Schledjewski, R., 2015, Key engineering materials. Vol. 651-653. p. 423-432 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  78. 2014
  79. Published

    Development & modeling of novel roving impregnation process inside closed sinusoidal cavity

    Miaris, A., Mitschang, P. & Schledjewski, R., 1 Jul 2014, In: SAMPE journal : official journal of the Society for the Advancement of Material and Process Engineering . 50, 4, p. 34-44 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    23. Leobener Kunststoff-Kolloquium - Hocheffiziente Verbundwerkstoffe

    Schledjewski, R. (Editor), 2014, 23. Leobener Kunststoff-Kolloquium - Hocheffiziente Verbundwerkstoffe. Eigenverlag, (Schriftenreihe Kunststofftechnik Leoben; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Automated Preforming of Profiles for Efficient LCM-Processing of Structural Components in Aeronautic Applications

    Fauster, E., Schillfahrt, C. & Schledjewski, R., 2014, Proceedings of Reinforced Plastics 2014 International BALATON Conference. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Automatisierte Legeverfahren

    Schledjewski, R., 2014, Handbuch Faserverbundkunststoffe/Composites – Grundlagen, Verarbeitung, Anwendungen. p. 233-236

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  83. Published

    Bearbeitung, Oberflächenbehandlung

    Schledjewski, R., Blinzler, M. & Hildebrandt, K., 2014, Handbuch Verbundwerkstoffe: Werkstoffe, Verarbeitung, Anwendung. p. 433-453

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  84. Published

    Christian Doppler Laboratory for High Efficient Composite Processing

    Schledjewski, R., Grössing, H., Konstantopoulos, S., Hueber, C. & Tonejc, M., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Comparison of Algorithms for 2D Anisotropic Permeability Calculation in Terms of Uncertainty Propagation

    Fauster, E., Grössing, H. & Schledjewski, R., 2014, Proceedings of the 16th European Conference on Composite Materials. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    CONTINUOUS ON-LINE ANALYSIS OF THE MATRIX FLOW THROUGH MANIPULATED RTM PREFORMS COMPARED TO NUMERICAL FILLING SIMULATIONS

    Grössing, H., Schledjewski, R. & Kaufmann, S., 2014, SAMPE Tech US 2014. p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    Defect depth determination in a CFRP structure using TSR technique

    Oswald-Tranta, B., Maier, A. & Schledjewski, R., 2014

    Research output: Non-textual form › Web publication/site › Research

  88. Published

    Effiziente Verarbeitung von Luftfahrt-Strukturbauteilen durch Einsatz automatisierter Profil-Preformfertigung

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 2014, 23. Leobener Kunststoff-Kolloquium: Hocheffiziente Verbundwerkstoffe. Schledjewski, R. (ed.). Eigenverlag, p. 29-39 10 p. (Schriftenreihe Kunststofftechnik Leoben; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    FRP parts in aircraft development: design-to-cost approaches

    Horejsi, K. & Schledjewski, R., 2014, Proceedings of THE 22ND ANNUAL INTERNATIONAL CONFERENCE ON COMPOSITE ENGINEERING. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Ganzheitliche Prozessentwicklung im Bereich der Legetechnik

    Tonejc, M., Pazour, P., Fauster, E. & Schledjewski, R., 2014, Schriftenreihe Kunststofftechnik Leoben. p. 17-27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Glass Covered Magnetic Micro-Wires Operating in the Domain Wall Nucleation and Propagation Sensing Mode for Stress Detection in FRP Composite Structures

    Konstantopoulos, S., Potirakis, S., Christopoulos, A., Schledjewski, R. & Hristoforou, E., 2014, In: Sensor Letters. 12

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Kontinuierliches Schweißen unidirektional faserverstärkter Tapes – Wie kann die Bindungsqualität bewertet werden?

    Schledjewski, R., 2014, Online Proceedings 4a Technologietag 2014. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Kosteneffiziente Verbundbauteilgestaltung in der Luftfahrt – Methoden und Modelle zur Kostenschätzung

    Hueber, C., Horejsi, K. & Schledjewski, R., 2014, 23. Leobener Kunststoff-Kolloquium : 13. - 14. November 2014. Schledjewski, R. (ed.). p. 155-167 (Schriftenreihe Kunststofftechnik Leoben; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Kritische Betrachtung von LCM Füllsimulationen: Abgleich des realen Prozesses mit numerischen Vorhersagen

    Grössing, H., Schledjewski, R., Stadlmajer, N. & Fleischmann, M., 2014, 23. Leobener Kunststoff-Kolloquium: Hocheffiziente Verbundwerkstoffe. p. 7-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Materialhybride lokale Bauteilverstärkung – Chancen und Herausforderungen

    Schledjewski, R., 2014, 23. Leobener Kunststoff-Kolloquium - Hocheffiziente Verbundwerkstoffe. p. 193-200

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Materialhybride lokale Bauteilverstärkung – Chancen und Herausforderungen

    Schledjewski, R., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  97. Published

    Monitoring the production of FRP composites: A review of in-line sensing methods

    Konstantopoulos, S., Fauster, E. & Schledjewski, R., 2014, In: Express Polymer Letters. 8, p. 823-840

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Non-Destructive Thermography Analysis of Impact Damage on Large-Scale CFRP Automotive Parts

    Maier, A., Schmidt, R., Oswald-Tranta, B. & Schledjewski, R., 2014, In: Materials. 7, p. 413-429

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Prepregs

    Schledjewski, R., 2014, Handbuch Faserverbundkunststoffe/Composites – Grundlagen, Verarbeitung, Anwendungen. p. 492-495

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  100. Published

    Production method evaluation for large cylindrical composite parts under a cost perspective

    Horejsi, K., Schneiderbauer, G., Tauchner, J., Schledjewski, R. & Noisternig, J., 2014, Proceedings of the16th European Conference on Composite Materials. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Pultrusionsverfahren

    Schledjewski, R., Friedrich, K. & Wiedmer, S., 2014, Handbuch Verbundwerkstoffe: Werkstoffe, Verarbeitung, Anwendung. p. 317-323

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  102. Published

    Smart Composite Tubes – Series Production of 3D Curved Hollow CFRP Tubes

    Schillfahrt, C., Schledjewski, R., Troi, V. & Schennach, O., 2014, 35th SAMPE Europe International Technical Conference (SEICO14). p. 94-100 7 p. P 23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Using Glass Covered Magnetic Micro-Wire Composites in Fiber Reinforced Polymeric Composites for Aeronautical Applications

    Konstantopoulos, S., Christopoulos, A., Schledjewski, R. & Hristoforou, E., 2014, In: Sensor Letters. 12

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Wickel- und Tapelegetechnik

    Schledjewski, R., Schlottermüller, M., Neitzel, M., Beresheim, G., Mack, J. & Brzeski, M., 2014, Handbuch Verbundwerkstoffe: Werkstoffe, Verarbeitung, Anwendung. p. 325-355

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (250)