Ralf Schledjewski

(Former)

1 - 50 out of 250Page size: 50

Research output

  1. 2024
  2. Published

    Fatigue and residual strain monitoring for thermoplastic composite using embedded FBG inscribed in highly-birefringent side-hole elliptical core optical fiber

    Wachtarczyk, K., Yadav, N., Błachut, A., Gąsior, P., Schledjewski, R. & Kaleta, J., 27 Jul 2024, In: Measurement. 238.2024, October, 14 p., 115404.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Manufacturing bio-based fiber-reinforced polymer composites: Process performance in RTM and VARI processes

    Kirschnick, U., Feuchter, M., Ravindran, B., Salzmann, M., Duretek, I., Fauster, E. & Schledjewski, R., 19 Jul 2024, In: Advanced Manufacturing: Polymer and Composites Science. 10.2024, 1, 12 p., 2379205.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    INLINE PROCESS MONITORING AND FAILURE MANAGEMENT CONCEPT FOR ATL

    Yadav, N., Schledjewski, R. & Fauster, E., 2024, Proceedings of the 21st European Conference on Composite Materials: Volume 5 - Manufacturing. p. 497-502 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. 2023
  6. Published

    Effect of Binder Activation on in-Plane Capillary Flow in Multilayer Stacks of Carbon Fiber Fabrics

    Neunkirchen, S., Bender, M. & Schledjewski, R., 21 Dec 2023, In: Applied composite materials. 31.2024, April, p. 709-719 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Determination of the glass transition temperature of an epoxy prepreg by Near Infrared Spectroscopy

    Salzmann, M., Teuchtmann, M. & Schledjewski, R., Aug 2023, In: Polymer Testing. 125.2023, August, 8 p., 108111.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Parametric effect on inline width control for thermoplastic automated tape layup

    Yadav, N. & Schledjewski, R., Aug 2023.

    Research output: Contribution to conference › Paper

  9. E-pub ahead of print

    Review of in-process defect monitoring for automated tape laying

    Yadav, N. & Schledjewski, R., 20 Jul 2023, (E-pub ahead of print) In: Composites Part A: Applied Science and Manufacturing. 173.2023, Oktober, 16 p., 107654.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    In-line and off-line NDT defect monitoring for thermoplastic automated tape layup

    Yadav, N., Oswald-Tranta, B., Gürocak, M., Galic, A., Adam, R. & Schledjewski, R., 31 Mar 2023, (E-pub ahead of print) In: NDT and E international. 137.2023, July, 8 p., 102839.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Investigation of the Mechanical Properties of Sandwich Composite Panels Made with Recyclates and Flax Fiber/Bio-Based Epoxy Processed by Liquid Composite Molding

    Ravindran, B., Feuchter, M. & Schledjewski, R., 15 Mar 2023, In: Journal of composites science. 7.2023, 3, 16 p., 122.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Circularity and sustainability of biobased polymer/natural fiber reinforced composite

    Ravindran, B. & Schledjewski, R., 2023, Global Challenges for a Sustainable Society .

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  13. Published

    Environmental assessment of natural fiber reinforced polymer composites processing

    Kirschnick, U. & Schledjewski, R., 2023, 31st Leoben Conference on Polymer Engineering & Science.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Environmental performance comparison of a one-step and two-step compounding and injection molding process using recycled PP and glass fibers

    Kirschnick, U., Shahroodi, Z., Krempl, N. & Schledjewski, R., 2023, Polymer Meeting 15: Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Screening Life Cycle Assessment comparing One-step and Two-step Injection Molding Compounding using Conservative and Optimistic Scenarios

    Kirschnick, U., Shahroodi, Z., Krempl, N. & Schledjewski, R., 2023, In: WSEAS transactions on environment and development. 19.2023, 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. 2022
  17. Published

    COMPOSITES SUSTAINABILITY – MANUFACTURING, REPAIR, AND RECYCLING ARE CHALLENGING

    Schledjewski, R., 22 Nov 2022, Proceedings SE Conference 22 Hamburg.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    A porous capillary tube approach for textile saturation

    Neunkirchen, S., Blößl, Y. & Schledjewski, R., 10 Nov 2022, In: Composites science and technology. 230.2022, 10 November, 9 p., 109450.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Bio-based FRP composites and their circularity potential: Options for environmental assessment

    Kirschnick, U., Kern, H. & Schledjewski, R., 10 Nov 2022.

    Research output: Contribution to conference › Presentation › Research › peer-review

  20. Published

    Bio-based FRP composites and their circularity potential: Options for environmental assessment

    Kirschnick, U., Kern, H. & Schledjewski, R., 9 Nov 2022.

    Research output: Contribution to conference › Paper › peer-review

  21. Published

    Inline tape width control for thermoplastic automated tape layup

    Yadav, N. & Schledjewski, R., 21 Oct 2022, In: Composites Part A: Applied Science and Manufacturing. 163.2022, December, 9 p., 107267.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Circularity and sustainability of biobased polymer/natural fiber reinforced composite

    Ravindran, B. & Schledjewski, R., 20 Oct 2022.

    Research output: Contribution to conference › Presentation › Research › peer-review

  23. Published

    Gel Point Determination in Resin Transfer Molding Process with Fiber Bragg Grating Inscribed in Side-Hole Elliptical Core Optical Fiber

    Wachtarczyk, K., Bender, M., Fauster, E., Schledjewski, R., Gąsior, P. & Kaleta, J., 19 Sept 2022, In: Materials. 15.2022, 18, 14 p., 6497.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Dry fiber filament winding - Fundamentals and challenges

    Neunkirchen, S. & Schledjewski, R., 15 Sept 2022.

    Research output: Contribution to conference › Poster › Research

  25. Published

    Capillary Driven Saturation of Textile Reinforcing Structures Proposal for an Extension of Lucas-Washburn Equation

    Schledjewski, R., Blößl, Y. & Neunkirchen, S., 22 Jul 2022, Achievements and Trends in Material Forming- Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022. Vincze, G. & Barlat, F. (eds.). Trans Tech Publications, p. 1372-1378 7 p. (Key Engineering Materials; vol. 926 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    A COMPARISON OF DIFFERENT NATURAL FIBER REINFORCED COMPOSITES USING RTM & VARI PROCESS

    Ravindran, B., Ekam, M., Kirschnick, U., Le Vély, G., Salzmann, M., Schledjewski, R. & Schmid, S., 20 Jul 2022.

    Research output: Contribution to conference › Poster › Research

  27. Published

    Experimental validation of the porous tube model for capillary rise

    Neunkirchen, S., Blößl, Y. & Schledjewski, R., 20 Jul 2022.

    Research output: Contribution to conference › Poster › Research

  28. Published

    Recycling GFRP composites: How to assess environmental performance?

    Kirschnick, U., Krempl, N. & Schledjewski, R., 20 Jul 2022.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Using Near-Infrared-Spectroscopy for quality inspection of prepregs before processing

    Salzmann, M., Schledjewski, R. & Teuchtmann, M., 27 Jun 2022.

    Research output: Contribution to conference › Poster › Research

  30. Published

    Experimental validation of the porous tube model for capillary rise

    Neunkirchen, S., Blößl, Y. & Schledjewski, R., 20 Jun 2022, 23. Symposium Verbundwerkstoffe und Werkstoffverbunde – Abstract Booklet. DGM, p. 28 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Improved layup quality during automated thermoplastic tape layup – Inline detection of consolidation force and tape geometry

    Yadav, N. & Schledjewski, R., 6 Apr 2022. 2 p.

    Research output: Contribution to conference › Paper

  32. Published

    In-line residual strain monitoring for thermoplastic automated tape layup using fiber Bragg grating sensors

    Yadav, N., Wachtarczyk, K., Gąsior, P., Schledjewski, R. & Kaleta, J., 5 Jan 2022, In: Polymer Composites. 43.2022, 3, p. 1590-1602 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Challenges in the use of highly birefringent fiber bragg gratings for strain sensing in composites

    Wachtarczyk, K., Bender, M., Yadav, N., Gąsior, P., Schledjewski, R. & Kaleta, J., 2022.

    Research output: Contribution to conference › Abstract

  34. Published

    Improved layup quality during automated thermoplastic tape layup – Inline detection of consolidation force and tape geometry

    Yadav, N. & Schledjewski, R., 2022.

    Research output: Contribution to conference › Abstract

  35. Published

    Inline NDT for thermoplastic Automated Tape Layup

    Yadav, N., Oswald-Tranta, B. & Schledjewski, R., 2022.

    Research output: Contribution to conference › Poster › Research

  36. Published

    Machine Learning Based Tape Width Prediction for the Thermoplastic Automated Tape Placement Process

    Legenstein, A. & Schledjewski, R., 2022, Composites meet Sustainability – Proceedings of the 20th European Conference on Composite Materials. 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Monitoring of thermoplastic composites with an FBG inscribed in highly-birefringent optic fiber

    Wachtarczyk, K., Yadav, N., Gąsior, P., Schledjewski, R. & Kaleta, J., 2022.

    Research output: Contribution to conference › Abstract

  38. Published

    Residual strain and structural health monitoring for automated tape layup using HiBi FBG sensor

    Yadav, N., Wachtarczyk, K., Gąsior, P., Schledjewski, R. & Kaleta, J., 2022.

    Research output: Contribution to conference › Poster › Research

  39. 2021
  40. Published

    In-Plane Strain Measurement in Composite Structures with Fiber Bragg Grating Written in Side-Hole Elliptical Core Optical Fiber

    Wachtarczyk, K., Gąsior, P., Kaleta, J., Anuszkiewicz, A., Bender, M., Schledjewski, R., Mergo, P. & Osuch, T., 31 Dec 2021, In: Materials. 15.2022, 1, 16 p., 77.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Usage of Near-Infrared Spectroscopy for Inline Monitoring the Degree of Curing in RTM Processes

    Salzmann, M., Blößl, Y., Todorovic, A. & Schledjewski, R., 17 Sept 2021, In: Polymers. 13.2021, 18, 13 p., 3145.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Thermoforming and Process Simulation of bio-based Form Sheets for Aircraft Applications (BioForS)

    Legenstein, A., Salzmann, M. & Schledjewski, R., 15 Sept 2021.

    Research output: Contribution to conference › Poster › Research

  43. E-pub ahead of print

    Ply-by-ply inline thermography inspection for thermoplastic automated tape layup

    Yadav, N., Oswald-Tranta, B., Schledjewski, R. & Wachtarczyk, K., 13 Sept 2021, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 7.2021, 3-4, p. 49-59 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Bio-based Form Sheets for Aircraft Applications (BioForS)

    Legenstein, A., Salzmann, M. & Schledjewski, R., 12 Sept 2021, 29th Leoben-Conference on Polymer Engineering and Science: 50 Years Polymer Engineering and Science at Montanuniversität Leoben. Friesenbichler, W. (ed.). Leoben, Vol. 10.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Holistic approach towards quality assurance for thermoplastic Automated Tape Layup

    Yadav, N. & Schledjewski, R., Sept 2021.

    Research output: Contribution to conference › Poster › Research

  46. Published

    In- and off-line NDT in automated in-situ consolidation tape layup

    Yadav, N., Gürocak, M., Galic, A., Adam, R. & Schledjewski, R., Sept 2021, SAMPE EUROPE Conference and Exhibition 2021: Baden, Switzerland, 28-30 September 2021.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Tack measurement of bindered rovings for the dry fiber winding process

    Neunkirchen, S. & Schledjewski, R., Sept 2021, In: Polymer Composites. 42, 9, p. 4607-4616 10 p., 26172.

    Research output: Contribution to journal › Article › Research › peer-review

  48. E-pub ahead of print

    Equation for modelling energy transfers in multi-phase flows through porous media, optimised for liquid composite moulding processes

    Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 20 Aug 2021, (E-pub ahead of print) In: International journal of heat and mass transfer. 181.2021, December, 8 p., 121856.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Natural fibre reinforced thermoplastic sheet material: Thermoforming behaviour and process simulation: Thermoforming and Process Simulation

    Legenstein, A., Salzmann, M. & Schledjewski, R., 29 Jun 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Spektroskopische Analyse von Prepregs (SAPP)

    Salzmann, M. & Schledjewski, R., 29 Jun 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    What to do with the waste? Options for GFRP and CFRP waste treatment along the value chain

    Kirschnick, U. & Schledjewski, R., 29 Jun 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  52. Published

    ACTIVE RTM PROCESS MANAGEMENT BASED ON PHENOMENOLOGICAL MODELS

    Fauster, E., Hergan, P. & Schledjewski, R., 2021.

    Research output: Contribution to conference › Paper › peer-review

  53. Published

    Defect monitoring and control for thermoplastic Automated Tape Layup

    Yadav, N. & Schledjewski, R., 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  54. Published

    Nur mit Öl und Säure: Von der Zitronensäure zu biobasierten Hochleistungs-Composites

    Todorovic, A., Resch-Fauster, K., Blößl, Y. & Schledjewski, R., 2021, In: CU reports : internationales Mitgliedermagazin des Composites United. [Deutsche Ausgabe] . 2021, 2, p. 28-29 2 p.

    Research output: Contribution to journal › Article › Research

Previous 1 2 3 4 5 Next
View graph of relations

Latest Research Output

View more (250)