Michael Stoschka

151 - 200 out of 208Page size: 50

Research output

  1. 2009
  2. Published

    Influence of the peening intensity on the fatigue behavior of shot peened titanium components

    Leitner, H., Oberwinkler, B., Gaenser, H. P. & Stoschka, M., 1 Jan 2009, Fatigue and Fracture Mechanics: 36th Volume. Vol. 1508 STP. p. 134-146 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Link from the microstructure to the fatigue lifteime of forged inconel 718 components

    Maderbacher, H., Gänser, H. P., Riedler, M., Stoschka, M. & Eichlseder, W., 1 Jan 2009, 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 59-60 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Advanced titanium forged component results (design, test, analysis of W-part)

    Tan, W. & Stoschka, M., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  5. Published

    Analysis and simulation of heat treatment processes for fatigue and fracture optimization of forged aircraft engine and structural parts

    Riedler, M., Stockinger, M., Stoschka, M., Oberwinkler, B., Tan, W. & Leitner, H., 2009, Aeromat2009. p. 11-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Comparative studies of hardened surface layers under contact stress

    Trausmuth, A., Godor, I., Stoschka, M. & Eichlseder, W., 2009, Advances in Experimantal Mechanics. p. 263-264

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Computational Fatigue Optimization – Application for purposeaimed Component and Forging Process Design

    Riedler, M., Stockinger, M., Stoschka, M., Oberwinkler, B. & Tan, W., 2009, Eucomas2009. p. 20-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Design of alternative part fitting for microstructural reference tests

    Tan, W. & Stoschka, M., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    EFFECTS OF ANISOTROPY AND EFFECTIVE STRAIN ON THE FATIGUE PROPERTIES OF A TITANIUM ALLOY

    Tan, W., Stoschka, M., Riedler, M. & Eichlseder, W., 2009, 26th symposium on advances in experimental mechanics. p. 271-272

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    EFFECTS OF ANISOTROPY AND EFFECTIVE STRAIN ON THE FATIGUE PROPERTIES OF A TITANIUM ALLOY

    Tan, W., Stoschka, M., Riedler, M. & Eichlseder, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  11. Published

    Influence of welding process parameters on fatigue by local sub-modelling

    Stoschka, M., Fössl, T., Schörghuber, M. & Eichlseder, W., 2009, 62nd IIW International Conference on Advances in Welding and Allied Technologies. p. 387-392

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Influence of welding process parameters on fatigue life by local sub-modelling

    Stoschka, M., Fössl, T., Schörghuber, M. & Eichlseder, W., 2009, In: Welding in the world. 53, SPECIAL ISSUE, p. 387-392 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Introduction to an approach based on the (α+β) microstructure of elements of alloy Ti-6Al-4V

    Stoschka, M., Tan, W., Eichlseder, W. & Stockinger, M., 2009, Procedia Engineering. 1 ed. Vol. 1. p. 31-34 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Link from the microstructure to the fatigue lifetime of forged INCONEL 718 components

    Maderbacher, H., Gänser, H.-P., Riedler, M., Stoschka, M. & Eichlseder, W., 2009, 26th DANUBIA-Adria Symposium 2009. p. 59-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    LINKING MICROSTRUCTURE AND FATIGUE OF FORGED Ti-6Al-4V AEROSPACE PARTS

    Riedler, M., Stockinger, M., Stoschka, M., Oberwinkler, B. & Tan, W., 2009, LCF 6. p. 71-75

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Local submodelling of single-welded joints

    Fössl, T., Stoschka, M. & Eichlseder, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  17. Published

    Vergleich der Lebensdauer von Kontaktbeanspruchten Werkstoffen unter Einsatzhärtung und Plasmanitrierung

    Trausmuth, A., Godor, I., Stoschka, M., Haberer, C., Dietrich, A. & Eichlseder, W., 2009, Lebensdauer und Energieeffizienz; Herausforderung im Maschinenbau und in der Schmierungstechnik. p. 145-157

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. 2008
  19. Published

    Analyzing thermo-mechanical simulation parameters of complex welded structures

    Fössl, T., Stoschka, M. & Eichlseder, W., 2008, 25th Danubia-Adria Symposium. p. 75-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    ANALYZING THERMO-MECHANICAL SIMULATION PARAMETERS OF COMPLEX WELDED STRUCTURES

    Fössl, T., Stoschka, M. & Eichlseder, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  21. Published

    Assessment of lifetime calculation of forged IN718 aerospace components based on a mulit-parametric microstructural evaluation

    Stoschka, M., Stockinger, M., Leitner, H., Riedler, M. & Eichlseder, W., 2008, SUPERALLOYS 2008. p. 573-582

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  22. Published

    Assessment of lifetime calculation of forged IN718 aerospace components based on a multi-parametric microstructural evaluation

    Stoschka, M., Stockinger, M., Leitner, H. & Riedler, M., 2008, Eleventh International Symposium on Superalloys. p. 573-582

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Auswirkung von Kaltumformung und Wärmebehandlung auf die Dauerfestigkeit von rundgekneteten Getriebewellen

    Stoschka, M., Lamik, A. & Leitner, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Ermittlung der Schwingfestigkeit von reibrührgeschweißten Schraubenverbindungen

    Stoschka, M., Javidi, A., Leitner, H. & Lamik, A., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Further investigations on lower link fitting

    Stoschka, M. & Tan, W., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Influence of Shot Peening on the Fatigue Behaviour of Ti-6Al-4V in Respect of Multiaxial Loading

    Oberwinkler, B., Leitner, H. & Stoschka, M., 2008, 10th International Conference on Shot Peening. p. 100-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Influence of the Peening Intensity on the Fatigue Behavior of Shot Peened Titanium Components

    Leitner, H., Oberwinkler, B., Gänser, H.-P. & Stoschka, M., 2008, In: Journal of ASTM international. 5, p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Influences of the microstructure on the fatigue behaviour of Ti-6AL-4V-Alloy

    Tan, W., Stoschka, M., Eichlseder, W. & Riedler, M., 2008, Influences of the microstructure on the fatigue behaviour of Ti-6AL-4V-Alloy. p. 257-258

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Influences of the microstructure on the fatigue behaviour of Ti-6AL-4V-Alloy

    Tan, W., Stoschka, M., Eichlseder, W. & Riedler, M., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Jahresbericht 2007 - CD Labor

    Eichlseder, W., Grün, F., Köberl, H., Stoschka, M., Winter, G. & Fröschl, J., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    Literaturrecherche über die Anwendung der Lasertechnologie zur

    Stoschka, M. & Fössl, T., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    Literaturrecherche über die Schädigungsberechnung geschweißter Strukturen

    Stoschka, M. & Fössl, T., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    Rotating bending test of mill annealed V- shape

    Stoschka, M. & Tan, W., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Tätigkeitsbericht CD-Labor

    Eichlseder, W., Fröschl, J., Grün, F., Stoschka, M., Leitgeb, A., Köberl, H. & Winter, G., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    The influence of welding process parameters on residual stresses by means of coupled thermo-mechanical

    Stoschka, M., Fössl, T., Leitner, H. & Eichlseder, W., 2008, The influence of welding process parameters on residual stresses by means of coupled thermo-mechanical. p. 701-708

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    THERMO-MECHANICAL SIMULATION PARAMETERS OF COMPLEX WELDED STRUCTURES

    Fössl, T., Stoschka, M. & Eichlseder, W., 2008, THERMO-MECHANICAL SIMULATION PARAMETERS OF COMPLEX WELDED STRUCTURES. p. 67-68

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Verhalten von gehärteten Randschichten unter Kontaktbeanspruchung

    Trausmuth, A., Godor, I., Stoschka, M. & Leitner, H., 2008, Verhalten von gehärteten Randschichten unter Kontaktbeanspruchung. p. 81-93

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. 2007
  39. Published

    CD-Laboratory: Evaluation Report 2007

    Eichlseder, W., Fröschl, J., Grün, F., Leitgeb, A., Stoschka, M. & Winter, G., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  40. Published

    Fatigue analysis of forged aerospace components based on micro structural parameters

    Riedler, M., Stockinger, M., Stoschka, M. & Eichlseder, W., 2007, Key engineering materials. Vol. 348-349. p. 185-188 4 p. (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  41. Published

    Fatigue Analysis of Forged Aerospace Components based on Micro Structural Paramters

    Riedler, M., Stockinger, M., Stoschka, M. & Eichlseder, W., 2007, Key engineering materials. p. 348-349 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  42. Published

    Influence of forging process parameters on fatigue life, exemplified for inconel 718

    Stoschka, M., Riedler, M. & Eichlseder, W., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Jahresbericht zum Ermüdungsverhalten von Schweißnähten hochfester Feinkornstähle

    Stoschka, M., Fössl, T. & Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Numerischer Vergleich des Kontaktverhaltens verschiedener Prüfverfahren

    Stoschka, M., Grün, F., Godor, I. & Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  45. Published

    Oberflächentopologie am gebeizten Ti-6-4 Schmiedeteil

    Stoschka, M. & Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    Schadensanalytischer Vergleich des Kontaktverhaltens verschiedener Prüfverfahren

    Stoschka, M., Godor, I. & Trausmuth, A., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Tribologische Charakterisierung von Materialien

    Godor, I., Grün, F. & Stoschka, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Umlaufbiegung von Rohrproben bei 150°C und 1Hz Prüffrequenz

    Lamik, A., Leitner, H. & Stoschka, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Verhalten von Plasmanitrierschichten unter Rolling Contact Fatigue Beanspruchung

    Godor, I., Leitner, H., Stoschka, M. & Trausmuth, A., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. 2006
  51. Published

    Alternativer Zweizylinderantrieb - Einsatz in Teleskopauslegern

    Stoschka, M., 2006, In: Hebezeuge und Fördermittel. 46, p. 502-504

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Antriebskonzept für mehrteilige, teleskopierbare Ausleger

    Stoschka, M., 2006, 14. Kranfachtagung, Krane-Einsatzerfahrungen und Entwicklungstendenzen. p. 41-62

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  53. Published

    Development of ABAQUS Model for Compound Material Friction Temperature Dependency Simulation

    Vitek, T., Grün, F., Leitgeb, A., Stoschka, M., Godor, I. & Eichlseder, W., 2006, Winter Workshop of Applied Mechanics. p. 46-51

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Einfluss der Warmformgebung auf die Schwingfestigkeit

    Stoschka, M., Gach, E., Stockinger, M. & Eichlseder, W., 2006, Einfluss der Warmformgebung auf die Schwingfestigkeit. p. 117-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 Next
View graph of relations

Contact

Phone: 1455

Latest Research Output

View more (208)