Michael Stoschka

51 - 100 out of 208Page size: 50

Research output

  1. 2017
  2. Published

    Aus einem Guss

    Stoschka, M., Siemens Graz, Lettner, C. & Moshammer, T., 31 Dec 2017, 2 p.

    Research output: Book/Report › Other report › Research

  3. Published

    Aufbau einer numerischen Simulationskette für induktionsgehärtete Randschichten

    Aigner, R., Stoschka, M. & Leitner, M., 6 Nov 2017, ESI Forum 2017 Konferenzband.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. E-pub ahead of print

    Microporosity and statistical size effect on the fatigue strength of cast aluminium alloys EN AC-45500 and 46200

    Leitner, M., Garb, C., Remes, H. & Stoschka, M., 8 Sept 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 707.2017, 7 November, p. 567-575 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. E-pub ahead of print

    Simulation of lamellar cast iron components under TMF-loads

    Strohhäussl, B., Stoschka, M., Winter, G. & Grün, F., 24 Aug 2017, (E-pub ahead of print) In: Materials Today: Proceedings. 4.2017, 5, Part 1, p. 5957-5962 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Fatigue assessment of welded and high frequency mechanical impact (HFMI) treated joints by master notch stress approach

    Leitner, M., Stoschka, M. & Ottersböck, M., 1 Aug 2017, In: International Journal of Fatigue. 101.2017, August, Part 2, p. 232-243 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    A Novel Two-Disc Machine for High Precision Friction Assessment

    Moder, J., Grün, F., Stoschka, M. & Gódor, I., 28 Jun 2017, In: Advances in tribology. 2017, 1, 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Analysis of fatigue notch effect due to axial misalignment for ultra high-strength steel butt joints

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 2017.

    Research output: Contribution to conference › Paper

  9. Published

    APPLICATION OF DIFFERENT SIMULATION APPROACHES TO NUMERICALLY OPTIMIZE HIGH FREQUENCY MECHANICAL IMPACT (HFMI) POST-TREATMENT PROCESS

    Ernould, C., Schubnell, J., Simunek, D., Leitner, M., Maciolek, A., Farajian, M. & Stoschka, M., 2017, COMMISSION XIII FATIGUE OF WELDED COMPONENTS AND STRUCTURES XIII-2684-17.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Damage tolerant fatigue design of seam imperfections in mild steel butt joints by analytical and numerical approaches

    Leitner, M., Remes, H., Murakami, Y. & Stoschka, M., 2017, IIW-Dokument XIII-WG4-158-17.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Effect of microporosity and surface condition on fatigue strength of casted aluminum components

    Leitner, M., Garb, C., Aigner, M. & Stoschka, M., 2017, 17th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Fatigue strength of welded ultra high-strength steel joints incorporating low transformation temperature (LTT) filler material and high frequency mechanical impact (HFMI) post-treatment

    Leitner, M., Ottersböck, M., Stoschka, M. & Maurer, W., 2017, Proceedings Euromat 2017.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. 2016
  14. E-pub ahead of print

    CIVIL COMP - Part 2

    Baratta, A., Barros, R. C., Citarella, R., Gentzsch, W., Kruis, J., Sextos, A. G., Stoschka, M., Iványi, P. & Topping, B. H. V., 22 Nov 2016, (E-pub ahead of print) In: Advances in Engineering Software. 101.2016, November, p. 1-2 2 p.

    Research output: Contribution to journal › Editorial › peer-review

  15. Published

    Measurement of dissolved hydrogen distributions after ultrasonic peening of heat-affected zone of welded joint

    Polyanskiy, V. A., Belyaev, A. K., Arseniev, D. G., Yakovlev, Y. A., Polyanskiy, A. M. & Stoschka, M., 18 Nov 2016, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2016: Proceedings of the 10th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Vol. 1785. 030022

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Quality assurance of HFMI-treatment regarding fatigue strength of fillet welds

    Stoschka, M., Leitner, M. (Co-editor) & Ottersböck, M. (Co-editor), 13 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  17. Published

    Application studies for fatigue strength improvement of welded structures by high-frequency mechanical impact (HFMI) treatment

    Yildirim, H. C., Leitner, M., Marquis, G. B., Stoschka, M. & Barsoum, Z., 2016, In: Engineering Structures. 106, p. 422-435 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Effect of weld defects on the fatigue strength of ultra high-strength steels

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 2016, Proceedings of the ICMFM18.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Effect of weld defects on the fatigue strength of ultra high-strength steels

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 2016, In: Procedia Engineering. 160, p. 214-222

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Fatigue strength of fillet welded specimens focussing on angular distortion: XIII-2634-16

    Ottersböck, M. (Co-editor), Leitner, M. & Stoschka, M. (Co-editor), 2016.

    Research output: Contribution to conference › Presentation › Research

  21. 2015
  22. Published

    Fatigue Strength of HFMI-treated and Stress-relief Annealed High-strength Steel Weld Joints: Fatigue Design 2015, International Conference Proceedings, 6th Edition

    Leitner, M., Gerstbrein, S., Ottersböck, M. & Stoschka, M., 31 Dec 2015, In: Procedia Engineering. 133, p. 477-484 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Schwingfestigkeit ultrahochfester Schweißverbindungen

    Ottersböck, M., Leitner, M. & Stoschka, M., 30 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  24. Published

    Effect of post-weld heat treatment on the fatigue strength of HFMI-treated mild steel joints

    Leitner, M., Mössler, W., Putz, A. & Stoschka, M., 1 Nov 2015, In: Welding in the world. 59, 6, p. 861-873 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Accepted/In press

    Effect of local stress state on fatigue strength of welded T-joints

    Ottersböck, M., Leitner, M. & Stoschka, M., 27 Sept 2015, (Accepted/In press) Mathematical Modelling of Weld Phenomena 11. p. 1-19

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Fatigue strength of welded ultra high-strength steel joints

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 3 Jul 2015.

    Research output: Contribution to conference › Paper

  27. Published

    Effect of loading type on welded and HFMI-treated T-joints: XIII-2584-15

    Ottersböck, M., Leitner, M. & Stoschka, M., 29 Jun 2015.

    Research output: Contribution to conference › Paper

  28. Published

    Application of local approaches to assess the fatigue crack: XIII-WG3-36-15

    Stoschka, M., Leitner, M. & Ottersböck, M., 28 Jun 2015. 18 p.

    Research output: Contribution to conference › Presentation › Research

  29. Published

    Hyperworks applicaton examples regarding structural steel lightweight design

    Stoschka, M., 20 Mar 2015. 37 p.

    Research output: Contribution to conference › Presentation › Transfer

  30. Published

    Study of the support effect of welded high-strength steel joints

    Ottersböck, M., Leitner, M. & Stoschka, M., 5 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  31. Published

    Stützwirkungseffekt bei der Ermüdungsfestigkeit hochfester Stahlschweißverbindungen

    Ottersböck, M., Leitner, M. & Stoschka, M., 12 Feb 2015.

    Research output: Contribution to conference › Presentation › Research

  32. Published

    Application studies for the fatigue strength improvement of welded structures by high-frequency mechanical impact (HFMI) treatment

    Yildirim, H. C., Leitner, M., Marquis, G. B., Stoschka, M. & Barsoum, Z., 2015.

    Research output: Contribution to conference › Presentation › Research

  33. Published

    Beitrag zur Schwingfestigkeit von HFMI-behandelten Proben und Diskussion lokaler Ansätze zur Bauteilauslegung

    Stoschka, M. & Leitner, M., 2015. 19 p.

    Research output: Contribution to conference › Presentation › Research

  34. Published

    Fatigue strength of HFMI-treated high-strength steel joints under constant and variable amplitude block loading

    Leitner, M., Gerstbrein, S., Ottersböck, M. J. & Stoschka, M., 2015, In: Procedia Engineering. 101, p. 251-258 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Local fatigue assessment of welded and high frequency mechanical impact (HFMI) treated joints by simulation

    Simunek, D., Leitner, M. & Stoschka, M., 2015.

    Research output: Contribution to conference › Poster › Research

  36. 2014
  37. E-pub ahead of print

    Ermüdungsfestigkeit hochfester Stahlschweißverbindungen: Fatigue Strength of High-strength Welded Steel Joints

    Leitner, M., Stoschka, M., Ottersböck, M. & Simunek, D., 13 Dec 2014, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 160.2015, 1, p. 9-14 6 p.

    Research output: Contribution to journal › Article › Research

  38. Published

    A study on the fatigue crack initiation point of longitudinal attachments

    Ottersböck, M., Leitner, M. & Stoschka, M., 17 Mar 2014.

    Research output: Contribution to conference › Presentation › Research

  39. Published

    Bewertung der Betriebsfestigkeit von Schweißnähten basierend auf einer Schweißstruktursimulation

    Ottersböck, M., Maier, B. & Stoschka, M., 2014, Tagungsband „Simulationsforum Schweißen und Wärmebehandlung 2013“. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Contact fatigue life investigations and wear mechanisms of gears with different steels and hardening process

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2014, 5th World Tribology Congress, WTC 2013. Vol. 3. p. 2620-2623 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Contribution towards fatigue strength of thermo-mechanically processed metallic components

    Stoschka, M., 2014

    Research output: Thesis › Habilitation thesis › peer-review

  42. Published

    Fatigue enhancement of thin-walled high-strength steel joints by high frequency mechanical impact treatment

    Leitner, M., Stoschka, M. & Eichlseder, W., 2014, In: Welding in the world. 58, p. 29-39

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Integration of Phase-Dependent Work-Hardening into Transient Weld Simulation

    Stoschka, M., Ottersböck, M. & Leitner, M., 2014, Proceedings of the Ninth International Conference on Engineering Computational Technology. p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Local Fatigue Assessment of Welded and High Frequency Mechanical Impact-Treated Joints based on Manufacturing Process Simulation

    Leitner, M., Simunek, D. & Stoschka, M., 2014, Proceedings of the Ninth International Conference on Engineering Computational Technology. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. 2013
  46. Published

    The influence of microstructure and operating temperature on the fatigue endurance of hot forged Inconel (R) 718 components

    Maderbacher, H., Oberwinkler, B., Gänser, H.-P., Tan, W., Rollett, M. & Stoschka, M., 15 Nov 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, p. 123-131

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Assessment of HFMI post-treated joints by the notch stress approach

    Leitner, M., Stoschka, M. & Eichlseder, W., 2013, Proceedings of the 13th International SF2M Spring Meeting. p. 90-102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Comprehensive Investigations of new Filler Materials for Welding of High Strength Steels

    Schnitzer, R., Rauch, R., Ernst, W., Wagner, J., Baumgartner, S., Leitner, M., Stoschka, M., Schlagradl, T., Schneider, R. & Bernhard, C., 2013, Proceedings of the 3rd International Conference. p. 323-332

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Contact fatigue life and wear mechanisms of case hardened and nidrided steels

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2013, Proceedings of Baltmatrib 2013. p. 18-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Contact fatigue life investigations and wear mechanisms of different case hardened surfaces under rolling contact loading for gears

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2013, VDI Berichte 2199.1. p. 497-509

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Distortion analysis of a welded corner stiffening frame considering manufacturing restraining conditions

    Stoschka, M., Loose, T. & Barsoum, Z., 2013, In: Computers & Structures.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Effect of high-strength filler metals on the fatigue behaviour of butt joints

    Stoschka, M., Leitner, M., Posch, G. & Eichlseder, W., 2013, In: Welding in the world. 57, p. 85-96

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Kontaktermüdung und Verschleiß von einsatzgehärteten Stählen und Nitrierschichten

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2013, Proceedings der Tribologie Fachtagung 2013 der Gesellschaft für Tribologie (GfT). p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Local fatigue assessment of welded and high frequency mechanical impact (HFMI) treated joints by simulation

    Simunek, D., Leitner, M. & Stoschka, M., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  55. Published

    Numerical simulation loop to investigate the local fatigue behaviour of welded and HFMI-treated joints: XIII-WG2-136-13

    Simunek, D., Leitner, M. & Stoschka, M., 2013

    Research output: Non-textual form › Web publication/site › Research

Previous 1 2 3 4 5 Next
View graph of relations

Contact

Phone: 1455

Latest Research Output

View more (208)