Michael Stoschka

101 - 200 out of 208Page size: 100

Research output

  1. 2013
  2. Published

    Studie des transienten Verfestigungsverhaltens für ein- und mehrlagige Verbindungen

    Stoschka, M., Ottersböck, M. & Leitner, M., 2013, Proceedings of the Simulation Forum FWS 2013. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Study of kinematic strain hardening law in transient welding simulation

    Ottersböck, M., Stoschka, M. & Thaler, M., 2013, Mathematical Modelling of Weld Phenomena : [... papers presented at the 10th International Seminar "Numerical Analysis of Weldability", held from September 24 to 26, 2012 at Schloss Seggau near Graz, Austria ; ... the meeting was organized by the Institute for Materials Science and Welding (IWS) of Graz University of Technology ...] . Vol. 10. p. 255-266

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Study of Kinematic Strain Hardening Law in Transient Welding Simulation

    Ottersböck, M., Stoschka, M. & Thaler, M., 2013, Mathematical Modelling of Weld Phenomena 10. p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Study of the local notch stress HFMI master S/N-curve approach on high-strength steel joints

    Stoschka, M., Leitner, M. & Barsoum, Z., 2013, Proceedings of the 2nd Swedish Conference on Design and Fabrication of Welded Structures. p. 76-90

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    The influence of microstructure and operating temperature on the fatigue endurance of hot forged Inconel® 718 components

    Maderbacher, H., Oberwinkler, B., Gänser, H.-P., Tan, W., Rollett, M. & Stoschka, M., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. Volume 585, p. 123-131

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2012
  8. Published

    A closed concept to associate the hot-forging process controlled microstructure with fatigue life

    Stoschka, M., Stockinger, M., Maderbacher, H. & Riedler, M., 2 Oct 2012, Superalloys 2012 - Proceedings of the 12th International Symposium on Superalloys. p. 625-631 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Contribution to the fatigue enhancement of thin-walled, high-strength steel joints by high frequency mechanical impact treatment: IIW-Document XIII-2416-12

    Leitner, M., Stoschka, M. & Eichlseder, W., 2012

    Research output: Non-textual form › Web publication/site › Research

  10. Published

    EFFECT OF HIGH-STRENGTH FILLER METALS ON FATIGUE

    Stoschka, M., Leitner, M., Fössl, T. & Posch, G., 2012, In: Welding in the world. 56, 3-4, p. 20-29

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Fatigue assessment of welded high-strength steel joints using the local notch stress approach

    Simunek, D., Leitner, M. & Stoschka, M., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    Fatigue Life Investigations of Different Case Hardened Specimens under Rolling Contact Loading for Gears

    Trausmuth, A., Godor, I., Stoschka, M., Dietrich, A., Grün, F. & Eichlseder, W., 2012, 3rd Fatigue Sypmposium. p. 295-310

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Fatigue Life Investigations of Differently Hardened Specimens in Lubricated Tribological Rolling Contacts

    Trausmuth, A., Godor, I., Grün, F., Stoschka, M., Dietrich, A. & Eichlseder, W., 2012, Technische Akademie Esslingen. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Influence of High Frequency Peening on Fatigue of High-Strength Steels

    Leitner, M., Stoschka, M., Schanner, R. & Eichlseder, W., 2012, In: FME transactions.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Influence of steel grade on the fatigue strength enhancement by high frequency peening technology on longitudinal fillet weld gusset

    Leitner, M. & Stoschka, M., 2012, In: Journal of Engineering and Technology. 1, 3, p. 80-90 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Local fatigue behaviour of welded joints

    Leitner, M., Stoschka, M. & Barwart, S., 2012, Lightweight Design. p. 73-84

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Microstructural Assessment of IN718: A Closed-Loop Fatigue Approach

    Stoschka, M., Maderbacher, H. & Stockinger, M., 2012, Materials Science Forum. Vol. 706-709.2012. p. 2468-2473 (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  18. Published

    New developed filler metals for welding of high strength steels

    Schnitzer, R., Leitner, M., Fiedler, M. & Stoschka, M., 2012, Proceedings to the 2nd International Welding and Joining Technologies Congress and 19th Technical Welding Sessions. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Praktische Anwendungen eines höherfrequenten Hämmerverfahrens (PIT) in der Industrie

    Gerster, P., Leitner, M. & Stoschka, M., 2012, Tagungsband. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Quality testing of high-strength filler metals in regard to technical cracking – Part 1: IIW-II-C-438-11

    Stoschka, M., Leitner, M., Schnitzer, R. & Schörghuber, M., 2012

    Research output: Non-textual form › Web publication/site › Research

  21. Published

    Schwingfestigkeit hochfester Stähle an geschweißten Strukturen

    Leitner, M., Stoschka, M., Fössl, T. & Eichlseder, W., 2012, In: Schweiß- & Prüftechnik. p. 12-17

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Study of Kinematic Strain Hardening Law in Transient Welding Simulation

    Ottersböck, M., Stoschka, M. & Thaler, M., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    Topology optimization of a light-weight harvester head focussing on the delimbing knife unit

    Oppliger, F., Leitner, M. & Stoschka, M., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Welding procedure for high strength welds and their microstructural evolution during solidification and cooling: IIW Doc. II-C-436-11

    Vanovsek, W., Schnitzer, R., Schlagradl, T., Schneider, R., Posch, G., Schider, S., Bernhard, C., Leitner, H., Rauch, R., Fiedler, M. & Stoschka, M., 2012

    Research output: Non-textual form › Web publication/site › Research

  25. 2011
  26. Published

    Beitrag zur Lebensdaueruntersuchung von wälzbeanspruchten Härteschichten unterschiedlicher Stähle

    Trausmuth, A., Godor, I., Stoschka, M., Dietrich, A., Marsoner, S. & Eichlseder, W., 2011, Maschinenelemente Lager und Welle-Nabe-Verbindung. p. 335-351

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Contribution to the capability of filler metals to influence fatigue of butt joints: IIW_II-1775-11

    Stoschka, M., Leitner, M., Fössl, T. & Posch, G., 2011

    Research output: Non-textual form › Web publication/site › Transfer

  28. Published

    Contribution to the fatigue assessment of laser welded joints

    Stoschka, M., Thaler, M., Huemer, H. & Eichlseder, W., 2011, In: Procedia Engineering. 10, p. 1785-1790

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Evaluation of fillet weld properties and fatigue behaviour in dependence of welding parameters

    Leitner, M., Foessl, T., Stoschka, M. & Eichlseder, W., 2011, In: Archives of civil and mechanical engineering. 11, 3, p. 651-660

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Fatigue Behaviour of High-Strength Steels using an Optimized Welding Process and High Frequency Peening Technology

    Leitner, M., Stoschka, M., Schörghuber, M. & Eichlseder, W., 2011, Global Trends in Joining Cutting and Surfacing Technology. p. 729-736

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Lifetime Enhancement of Welded High-Strength Steel Joints by High Frequency Peening Technology

    Leitner, M., Stoschka, M., Schanner, R. & Eichlseder, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Lifetime Enhancement of Welded High-Strength Steel Joints by High Frequency Peening Technology

    Leitner, M., Stoschka, M., Schanner, R. & Eichlseder, W., 2011, 28th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 59-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Lifetime optimization of hot forged aerospace components by linking microstructural evaluation and fatigue behaviour

    Maderbacher, H., Gänser, H.-P., Riedler, M., Stoschka, M., Stockinger, M. & Eichlseder, W., 2011, Euro Superalloys 2010. Trans Tech Publications, p. 162-167 (Advanced materials research; vol. 278).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Load-carrying Capacity Prediction of Different Plasma Nitrided and Case hardened Specimens under Rolling Contact Loading

    Trausmuth, A., Lengauer, M., Godor, I., Stoschka, M., Dietrich, A. & Eichlseder, W., 2011, Quality in Heat Treatment. p. 143-153

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Load-carrying Capacity Prediction of Different Plasma Nitrided, Case hardened and Quenched Specimens under Rolling Contact Loading

    Trausmuth, A., Godor, I., Stoschka, M., Dietrich, A. & Eichlseder, W., 2011, Tribosystems Reliability and Lifetime Assessment. p. 441-447

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Material and component investigations on a Ti-6-4 fitting element

    Tan, W., Stoschka, M., Riedler, M., Eichlseder, W., Romagnoli, F. & Rondon, V., 2011, In: Mécanique & industries = Mechanics & industry. 12, 5, p. 361-378

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    MICROSTRUCTURAL ASSESSMENT OF IN718: A closed-loop fatigue approach

    Stoschka, M., Maderbacher, H., Stockinger, M. & Riedler, M., 2011, Abstracts Thermec 2011. p. 550-550

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    The influence of an improved adjustment of the material model on the fatigue lifetime results on Ti-6-4 air craft components

    Tan, W., Maderbacher, H., Stoschka, M., Riedler, M. & Eichlseder, W., 2011, 1st Interquadrennial ICF Conference in Middle East and Africa. p. 587-596

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    The influence of welding process parameters on residual stresses by means of coupled thermo-mechanical simulation

    Stoschka, M., Fössl, T., Leitner, H. & Eichlseder, W., 2011, In: International journal of microstructure and materials properties (IJMMP). 6, p. 105-121

    Research output: Contribution to journal › Article › Research › peer-review

  40. 2010
  41. Published

    A new lifetime calculation method based on variation of the microstructure due to different manufacturing conditions of Ti-6Al-4V

    Tan, W., Stoschka, M., Riedler, M. & Eichlseder, W., 2010, 18th European Conference on Fracture Fracture of Materials and Structures from Micro to Macro Scale. p. 0-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    An integrated approach to relate hot forging process controlled microstructure of IN718 aerospace components to fatigue life

    Stoschka, M., Riedler, M., Stockinger, M., Maderbacher, H. & Eichlseder, W., 2010, 7th International Symposium on SUPERALLOY718 and DERIVATIVES. p. 751-765

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Application of fatigue approaches on fillet welds of high strength steel

    Stoschka, M., Leitner, M., Fössl, T., Leitner, H. & Eichlseder, W., 2010, In: Materialwissenschaft und Werkstofftechnik. 41, p. 961-971

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Characterization of weld toe design by arc welding process parameters

    Fössl, T., Stoschka, M., Eichlseder, W. & Posch, G., 2010,

    63th IIW Annual Assembly & International Conference

    .     p. 126-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Contribution to the capability of filler metals to influence pulsating fatique life: II-C-402-10 II-1742

    Stoschka, M., Fössl, T., Leitner, M. & Posch, G., 2010

    Research output: Non-textual form › Web publication/site › Transfer

  46. Published

    Contribution to the Use of Local Fatigue Approaches Focussing on Finishes of Complete Welds

    Stoschka, M., Leitner, M., Fössl, T. & Schanner, R., 2010,

    63rd Annual Assembly & International Conference of the International Institute of Welding

    .     p. 245-252

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Fatigue investigations on a forged "W-Link" to improve the transferability of specimen results to real components

    Tan, W., Stoschka, M., Riedler, M. & Eichlseder, W., 2010, In: FATIGUE 2010. 2, 1, p. 2277-2285

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Investigations to improve the transferability of specimen results by real component

    Tan, W., Stoschka, M., Maderbacher, H., Riedler, M., Eichlseder, W. & Romagnoli, F., 2010, In: Materials engineering. 17, 3, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Investigations to improve the transferability of specimen results by the new component specimen "W-Link"

    Tan, W., Stoschka, M., Riedler, M. & Eichlseder, W., 2010, 27th Danubia-Adria Symbosium on Experimental Methods in Solid Mechanics. p. 0-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Life fatigue prediction of different plasma nitrided and case hardened specimens under rolling contact loading

    Trausmuth, A., Godor, I., Stoschka, M., Haberer, C., Eichlseder, W. & Dietrich, A., 2010, Nitrieren und Nitrocarburieren. p. 140-149

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Lifetime evaluation of hot forged aerospace components by linking microstructural evolution and fatigue behaviour

    Maderbacher, H., Christiner, T., Gänser, H.-P., Riedler, M., Stoschka, M. & Eichlseder, W., 2010, In: Procedia Engineering. 2, p. 2269-2276

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Rolling contact fatigue prediction of different plasma nitrided and case hardened specimens

    Eichlseder, W., Trausmuth, A., Godor, I. & Stoschka, M., 2010, Mechanical Engineering. p. 24-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Steigerung der Schwingfestigkeit geschweißter Strukturen durch die Pneumatic Impact Technology (PIT)

    Leitner, M., Fössl, T. & Stoschka, M., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  54. Published

    TRAGFÄHIGKEITSUNTERSUCHUNGEN VON UNTERSCHIEDLICH GEHÄRTETEN WERKSTOFFE UNTER KONTAKTBEANSPRUCHUNG

    Trausmuth, A., Godor, I., Stoschka, M., Eichlseder, W. & Dietrich, A., 2010, Wettbewerbsvorsprung durch tribologische Innovation. p. 57-71

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. 2009
  56. Published

    Influence of the peening intensity on the fatigue behavior of shot peened titanium components

    Leitner, H., Oberwinkler, B., Gaenser, H. P. & Stoschka, M., 1 Jan 2009, Fatigue and Fracture Mechanics: 36th Volume. Vol. 1508 STP. p. 134-146 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Link from the microstructure to the fatigue lifteime of forged inconel 718 components

    Maderbacher, H., Gänser, H. P., Riedler, M., Stoschka, M. & Eichlseder, W., 1 Jan 2009, 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 59-60 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Advanced titanium forged component results (design, test, analysis of W-part)

    Tan, W. & Stoschka, M., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  59. Published

    Analysis and simulation of heat treatment processes for fatigue and fracture optimization of forged aircraft engine and structural parts

    Riedler, M., Stockinger, M., Stoschka, M., Oberwinkler, B., Tan, W. & Leitner, H., 2009, Aeromat2009. p. 11-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Comparative studies of hardened surface layers under contact stress

    Trausmuth, A., Godor, I., Stoschka, M. & Eichlseder, W., 2009, Advances in Experimantal Mechanics. p. 263-264

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Computational Fatigue Optimization – Application for purposeaimed Component and Forging Process Design

    Riedler, M., Stockinger, M., Stoschka, M., Oberwinkler, B. & Tan, W., 2009, Eucomas2009. p. 20-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Design of alternative part fitting for microstructural reference tests

    Tan, W. & Stoschka, M., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  63. Published

    EFFECTS OF ANISOTROPY AND EFFECTIVE STRAIN ON THE FATIGUE PROPERTIES OF A TITANIUM ALLOY

    Tan, W., Stoschka, M., Riedler, M. & Eichlseder, W., 2009, 26th symposium on advances in experimental mechanics. p. 271-272

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    EFFECTS OF ANISOTROPY AND EFFECTIVE STRAIN ON THE FATIGUE PROPERTIES OF A TITANIUM ALLOY

    Tan, W., Stoschka, M., Riedler, M. & Eichlseder, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  65. Published

    Influence of welding process parameters on fatigue by local sub-modelling

    Stoschka, M., Fössl, T., Schörghuber, M. & Eichlseder, W., 2009, 62nd IIW International Conference on Advances in Welding and Allied Technologies. p. 387-392

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Influence of welding process parameters on fatigue life by local sub-modelling

    Stoschka, M., Fössl, T., Schörghuber, M. & Eichlseder, W., 2009, In: Welding in the world. 53, SPECIAL ISSUE, p. 387-392 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Introduction to an approach based on the (α+β) microstructure of elements of alloy Ti-6Al-4V

    Stoschka, M., Tan, W., Eichlseder, W. & Stockinger, M., 2009, Procedia Engineering. 1 ed. Vol. 1. p. 31-34 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Link from the microstructure to the fatigue lifetime of forged INCONEL 718 components

    Maderbacher, H., Gänser, H.-P., Riedler, M., Stoschka, M. & Eichlseder, W., 2009, 26th DANUBIA-Adria Symposium 2009. p. 59-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    LINKING MICROSTRUCTURE AND FATIGUE OF FORGED Ti-6Al-4V AEROSPACE PARTS

    Riedler, M., Stockinger, M., Stoschka, M., Oberwinkler, B. & Tan, W., 2009, LCF 6. p. 71-75

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Local submodelling of single-welded joints

    Fössl, T., Stoschka, M. & Eichlseder, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  71. Published

    Vergleich der Lebensdauer von Kontaktbeanspruchten Werkstoffen unter Einsatzhärtung und Plasmanitrierung

    Trausmuth, A., Godor, I., Stoschka, M., Haberer, C., Dietrich, A. & Eichlseder, W., 2009, Lebensdauer und Energieeffizienz; Herausforderung im Maschinenbau und in der Schmierungstechnik. p. 145-157

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. 2008
  73. Published

    Analyzing thermo-mechanical simulation parameters of complex welded structures

    Fössl, T., Stoschka, M. & Eichlseder, W., 2008, 25th Danubia-Adria Symposium. p. 75-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    ANALYZING THERMO-MECHANICAL SIMULATION PARAMETERS OF COMPLEX WELDED STRUCTURES

    Fössl, T., Stoschka, M. & Eichlseder, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  75. Published

    Assessment of lifetime calculation of forged IN718 aerospace components based on a mulit-parametric microstructural evaluation

    Stoschka, M., Stockinger, M., Leitner, H., Riedler, M. & Eichlseder, W., 2008, SUPERALLOYS 2008. p. 573-582

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  76. Published

    Assessment of lifetime calculation of forged IN718 aerospace components based on a multi-parametric microstructural evaluation

    Stoschka, M., Stockinger, M., Leitner, H. & Riedler, M., 2008, Eleventh International Symposium on Superalloys. p. 573-582

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Auswirkung von Kaltumformung und Wärmebehandlung auf die Dauerfestigkeit von rundgekneteten Getriebewellen

    Stoschka, M., Lamik, A. & Leitner, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  78. Published

    Ermittlung der Schwingfestigkeit von reibrührgeschweißten Schraubenverbindungen

    Stoschka, M., Javidi, A., Leitner, H. & Lamik, A., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  79. Published

    Further investigations on lower link fitting

    Stoschka, M. & Tan, W., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  80. Published

    Influence of Shot Peening on the Fatigue Behaviour of Ti-6Al-4V in Respect of Multiaxial Loading

    Oberwinkler, B., Leitner, H. & Stoschka, M., 2008, 10th International Conference on Shot Peening. p. 100-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Influence of the Peening Intensity on the Fatigue Behavior of Shot Peened Titanium Components

    Leitner, H., Oberwinkler, B., Gänser, H.-P. & Stoschka, M., 2008, In: Journal of ASTM international. 5, p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Influences of the microstructure on the fatigue behaviour of Ti-6AL-4V-Alloy

    Tan, W., Stoschka, M., Eichlseder, W. & Riedler, M., 2008, Influences of the microstructure on the fatigue behaviour of Ti-6AL-4V-Alloy. p. 257-258

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Influences of the microstructure on the fatigue behaviour of Ti-6AL-4V-Alloy

    Tan, W., Stoschka, M., Eichlseder, W. & Riedler, M., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  84. Published

    Jahresbericht 2007 - CD Labor

    Eichlseder, W., Grün, F., Köberl, H., Stoschka, M., Winter, G. & Fröschl, J., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  85. Published

    Literaturrecherche über die Anwendung der Lasertechnologie zur

    Stoschka, M. & Fössl, T., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  86. Published

    Literaturrecherche über die Schädigungsberechnung geschweißter Strukturen

    Stoschka, M. & Fössl, T., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  87. Published

    Rotating bending test of mill annealed V- shape

    Stoschka, M. & Tan, W., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  88. Published

    Tätigkeitsbericht CD-Labor

    Eichlseder, W., Fröschl, J., Grün, F., Stoschka, M., Leitgeb, A., Köberl, H. & Winter, G., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  89. Published

    The influence of welding process parameters on residual stresses by means of coupled thermo-mechanical

    Stoschka, M., Fössl, T., Leitner, H. & Eichlseder, W., 2008, The influence of welding process parameters on residual stresses by means of coupled thermo-mechanical. p. 701-708

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    THERMO-MECHANICAL SIMULATION PARAMETERS OF COMPLEX WELDED STRUCTURES

    Fössl, T., Stoschka, M. & Eichlseder, W., 2008, THERMO-MECHANICAL SIMULATION PARAMETERS OF COMPLEX WELDED STRUCTURES. p. 67-68

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Verhalten von gehärteten Randschichten unter Kontaktbeanspruchung

    Trausmuth, A., Godor, I., Stoschka, M. & Leitner, H., 2008, Verhalten von gehärteten Randschichten unter Kontaktbeanspruchung. p. 81-93

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. 2007
  93. Published

    CD-Laboratory: Evaluation Report 2007

    Eichlseder, W., Fröschl, J., Grün, F., Leitgeb, A., Stoschka, M. & Winter, G., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  94. Published

    Fatigue analysis of forged aerospace components based on micro structural parameters

    Riedler, M., Stockinger, M., Stoschka, M. & Eichlseder, W., 2007, Key engineering materials. Vol. 348-349. p. 185-188 4 p. (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  95. Published

    Fatigue Analysis of Forged Aerospace Components based on Micro Structural Paramters

    Riedler, M., Stockinger, M., Stoschka, M. & Eichlseder, W., 2007, Key engineering materials. p. 348-349 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  96. Published

    Influence of forging process parameters on fatigue life, exemplified for inconel 718

    Stoschka, M., Riedler, M. & Eichlseder, W., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  97. Published

    Jahresbericht zum Ermüdungsverhalten von Schweißnähten hochfester Feinkornstähle

    Stoschka, M., Fössl, T. & Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  98. Published

    Numerischer Vergleich des Kontaktverhaltens verschiedener Prüfverfahren

    Stoschka, M., Grün, F., Godor, I. & Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  99. Published

    Oberflächentopologie am gebeizten Ti-6-4 Schmiedeteil

    Stoschka, M. & Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  100. Published

    Schadensanalytischer Vergleich des Kontaktverhaltens verschiedener Prüfverfahren

    Stoschka, M., Godor, I. & Trausmuth, A., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  101. Published

    Tribologische Charakterisierung von Materialien

    Godor, I., Grün, F. & Stoschka, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  102. Published

    Umlaufbiegung von Rohrproben bei 150°C und 1Hz Prüffrequenz

    Lamik, A., Leitner, H. & Stoschka, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  103. Published

    Verhalten von Plasmanitrierschichten unter Rolling Contact Fatigue Beanspruchung

    Godor, I., Leitner, H., Stoschka, M. & Trausmuth, A., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  104. 2006
  105. Published

    Alternativer Zweizylinderantrieb - Einsatz in Teleskopauslegern

    Stoschka, M., 2006, In: Hebezeuge und Fördermittel. 46, p. 502-504

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Antriebskonzept für mehrteilige, teleskopierbare Ausleger

    Stoschka, M., 2006, 14. Kranfachtagung, Krane-Einsatzerfahrungen und Entwicklungstendenzen. p. 41-62

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  107. Published

    Development of ABAQUS Model for Compound Material Friction Temperature Dependency Simulation

    Vitek, T., Grün, F., Leitgeb, A., Stoschka, M., Godor, I. & Eichlseder, W., 2006, Winter Workshop of Applied Mechanics. p. 46-51

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  108. Published

    Einfluss der Warmformgebung auf die Schwingfestigkeit

    Stoschka, M., Gach, E., Stockinger, M. & Eichlseder, W., 2006, Einfluss der Warmformgebung auf die Schwingfestigkeit. p. 117-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 Next
View graph of relations

Contact

Phone: 1455

Latest Research Output

View more (208)