Michael Stoschka

1 - 50 out of 208Page size: 50

Research output

  1. 2024
  2. Published

    Investigation of fracture mechanical properties of a brass alloy with microstructural variations

    Klaushofer, M., Stoschka, M., Maier, B. & Grün, F., 25 Nov 2024, In: Engineering Fracture Mechanics. 311.2024, 25 November, 22 p., 110564.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    FATIGUE LIMIT ASSESSMENT OF INTERACTING SMALL DEFECTS BY CYCLIC R-CURVE ANALYSIS

    Fladischer, S., Stoschka, M. & Grun, F., 26 Aug 2024.

    Research output: Contribution to conference › Abstract › peer-review

  4. Published

    Service Strength Assessment of Macroscopic Imperfections in Cast Steel Alloys

    Stoschka, M., Horvath, M., Mössler, W. & Grun, F., 13 Jun 2024.

    Research output: Contribution to conference › Paper › peer-review

  5. 2023
  6. Published

    Effect of Surface Finishing State on Fatigue Strength of Cast Aluminium and Steel Alloys

    Oberreiter, M., Horvath, M., Stoschka, M. & Fladischer, S., 30 Jun 2023, In: Materials. 16.2023, 13, 41 p., 4755.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    A Numerically Efficient Method to Assess the Elastic–Plastic Strain Energy Density of Notched and Imperfective Cast Steel Components

    Horvath, M., Oberreiter, M. & Stoschka, M., 27 Apr 2023, In: Applied mechanics : open access journal. 4.2023, 2, p. 528-566 39 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Energy-Based Fatigue Assessment of Defect-Afflicted Cast Steel Components by Means of a Linear-Elastic Approach

    Horvath, M., Oberreiter, M. & Stoschka, M., 15 Mar 2023, In: Applied Sciences : open access journal. 13.2023, 6, 23 p., 3768.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Study of Local Fatigue Methods (TCD, N-SIF, and ESED) on Notches and Defects Related to Numerical Efficiency

    Stoschka, M., Horvath, M., Fladischer, S. & Oberreiter, M., 9 Feb 2023, In: Applied Sciences (Switzerland). 13.2023, 4, 41 p., 2247.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Effect of local microstructure on fatigue and related failure mechanisms in AlSi-castings

    Oberreiter, M., Stoschka, M., Horvath, M. & Fladischer, S., Jan 2023.

    Research output: Contribution to conference › Paper › peer-review

  11. Published

    Fatigue life assessment of imperfective cast steel components in the medium-cycle regime by stress- and energy-based concepts

    Horvath, M., Oberreiter, M. & Stoschka, M., 2023, In: Procedia Structural Integrity. 51, p. 95-101 7 p.

    Research output: Contribution to journal › Conference article › peer-review

  12. 2022
  13. Published

    Fatigue strength study based on geometric shape of bulk defects in cast steel

    Horvath, M., Stoschka, M. & Fladischer, S., Oct 2022, In: International Journal of Fatigue. 163.2022, October, 9 p., 107082.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Optimization of disc geometry and hardness distribution for better transferability of fatigue life prediction from disc to FZG tests

    Trausmuth, A., Stoschka, M. & Grün, F., 15 Jun 2022, In: Wear. 498-499.2022, 15 June, 13 p., 204329.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    A Probabilistic Fatigue Strength Assessment in AlSi-Cast Material by a Layer-Based Approach

    Oberreiter, M., Fladischer, S., Stoschka, M. & Leitner, M., 30 Apr 2022, In: Metals. 12.2022, 5, 22 p., 784.

    Research output: Contribution to journal › Article › Research › peer-review

  16. 2021
  17. Published

    Set-up of a Generalized Dataset for Crack-Closure-Mechanisms of Cast Steel

    Horvath, M., Oberreiter, M., Stoschka, M. & Leitner, M., 24 Nov 2021, In: Journal of Casting & Materials Engineering. 5.2021, 4, p. 84-88 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Characterisation of actual weld geometry and stress concentration of butt welds exhibiting local undercuts

    Ottersböck, M. J., Leitner, M. & Stoschka, M., 1 Aug 2021, In: Engineering Structures. 240, 1 August, 18 p., 112266.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Impact of microstructural properties on the crack threshold of aluminium castings

    Oberreiter, M., Aigner, R., Pomberger, S., Leitner, M. & Stoschka, M., Jan 2021, In: Engineering Fracture Mechanics. 241, 10 p., 107431.

    Research output: Contribution to journal › Article › Research › peer-review

  20. 2020
  21. Published

    Effect of load stress ratio on nominal and effective notch fatigue strength assessment of HFMI-treated high-strength steel cover plates

    Leitner, M. & Stoschka, M., 1 Oct 2020, In: International Journal of Fatigue. 139, October, 7 p., 105784.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Validation of the fatigue strength assessment of HFMI-treated steel joints under variable amplitude loading

    Leitner, M., Stoschka, M., Barsoum, Z. & Farajian, M., 23 Jun 2020, In: Welding in the world. 64.2020, 10, p. 1681-1689 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Validation Study on the Statistical Size Effect in Cast Aluminium

    Oberreiter, M., Pomberger, S., Leitner, M. & Stoschka, M., 27 May 2020, In: Metals : open access journal . 10.2020, 6, p. 710 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Probabilistic Surface Layer Fatigue Strength Assessment of EN AC-46200 Sand Castings

    Pomberger, S., Oberreiter, M., Leitner, M., Stoschka, M. & Thuswaldner, J., 9 May 2020, In: Metals : open access journal . 10.2020, 5, p. 616 26 p., 616.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Local strain energy density approach to assess the fatigue strength of sharp and blunt V-notches in cast steel

    Schuscha, M., Leitner, M., Stoschka, M. & Meneghetti, G., 1 Mar 2020, In: International Journal of Fatigue. 132.2020, March, 105334.

    Research output: Contribution to journal › Article › Research › peer-review

  26. 2019
  27. Published

    Areal fatigue strength assessment of cast aluminium surface layers

    Pomberger, S., Stoschka, M., Aigner, R., Leitner, M. & Ehart, R., 20 Dec 2019, In: International Journal of Fatigue. 133.2020, April, 11 p., 105423.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Crack Initiation and Propagation Fatigue Life of Ultra High-Strength Steel Butt Joints

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 1 Nov 2019, In: Applied Sciences : open access journal. 9.2019, 21, 4590.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Notch Stress Intensity Factor (NSIF)-Based Fatigue Design to Assess Cast Steel Porosity and Related Artificially Generated Imperfections

    Schuscha, M., Horvath, M., Leitner, M. & Stoschka, M., 11 Oct 2019, In: Metals : open access journal . 9.2019, 10, 28 p., 1097.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    On the behaviour of non-propagating cracks in steel and aluminium castings

    Schuscha, M., Aigner, R., Pomberger, S., Oberreiter, M., Leitner, M. & Stoschka, M., 17 Sept 2019, In: Engineering Fracture Mechanics. 220.2019, 15 October, 106670.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Cast surface texture characterisation via areal roughness

    Pomberger, S., Stoschka, M. & Leitner, M., 12 Sept 2019, In: Precision Engineering. 60.2019, p. 465-481 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    On the mean stress sensitivity of cast aluminium considering imperfections

    Aigner, R., Leitner, M. & Stoschka, M., 5 Jun 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 758.2019, June, p. 172-184 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    On the Statistical Size Effect of Cast Aluminium

    Aigner, R., Pomberger, S., Leitner, M. & Stoschka, M., 14 May 2019, In: Materials. 12.2019, 10, 19 p., 1578.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Application of different simulation approaches to numerically optimize high-frequency mechanical impact (HFMI) post-treatment process

    Ernould, C., Schubnell, J., Farajian, M., Maciolek, A., Simunek, D., Leitner, M. & Stoschka, M., 1 May 2019, In: Welding in the world. 63.2019, 3, p. 725-738 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Analysis of fatigue notch effect due to axial misalignment for ultra high-strength steel butt joints

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., May 2019, In: Welding in the world. 63.2019, 3, p. 851-865 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Evaluation of surface roughness parameters and their impact on fatigue strength of Al-Si cast material

    Pomberger, S., Leitner, M. & Stoschka, M., May 2019, In: Materials Today: Proceedings. 12.2019, 2, p. 225-234 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Numerical crack growth study on porosity afflicted cast steel specimens

    Schuscha, M., Leitner, M., Stoschka, M., Pusterhofer, S. & Meneghetti, G., 1 Apr 2019, In: Frattura ed integrità strutturale. 13.2019, 48, p. 58-69 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    A probabilistic Kitagawa-Takahashi diagram for fatigue strength assessment of cast aluminium alloys

    Aigner, R., Pusterhofer, S., Pomberger, S., Leitner, M. & Stoschka, M., 4 Feb 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 745.2019, February, p. 326-334 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Application of different simulation approaches to numerically optimize high-frequency mechanical impact (HFMI) post-treatment process

    Ernould, C., Schubnell, J., Farajian, M., Maciolek, A., Simunek, D., Leitner, M. & Stoschka, M., 1 Feb 2019, In: Welding in the world. 63.2019, 1 May, p. 725-738 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Fatigue design of metallic components considering bulk and surface imperfections

    Leitner, M., Schneller, W., Pusterhofer, S. & Stoschka, M., 2019, Intermediate Meeting of IIW Commission XIII: IIW Document XIII-WG4-167-19.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Fatigue strength assessment of HFMI-treated steel joints under variable amplitude loading

    Leitner, M., Stoschka, M., Barsoum, Z. & Farajian, M., 2019, 72nd IIW Annual Assembly and International Conference: IIW Document XIII-2818-19.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Short and long crack growth of aluminium cast alloys

    Leitner, M., Aigner, R., Pomberger, S., Stoschka, M., Garb, C. & Pusterhofer, S., 2019, Structural Integrity: Mechanical Fatigue of Metals. 7 ed. Springer, p. 139-145 7 p. (Structural Integrity; vol. 7).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  43. 2018
  44. Published

    Application of a √ area -Approach for Fatigue Assessment of Cast Aluminum Alloys at Elevated Temperature

    Aigner, R., Garb, C., Leitner, M., Stoschka, M. & Grün, F., Dec 2018, In: Metals : open access journal . 8, 12

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Effect of as-cast surface layer on aluminium alloy fatigue strength

    Pomberger, S., Leitner, M. & Stoschka, M., 25 Sept 2018, 35th Danubia-Adria Symposium on Advances in Experimental Mechanics. Sinaia, Romania, p. 73-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Application of the generalized Kitagawa diagram on cast steel

    Schuscha, M., Leitner, M., Stoschka, M. & Meneghetti, G., 21 Sept 2018, Proceedings of the 6th International Conference on Crack Paths.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Short and Long Crack Growth of Aluminium Cast Alloys

    Leitner, M., Aigner, R., Pomberger, S., Stoschka, M., Garb, C. & Pusterhofer, S., 7 Sept 2018, Proceedings of the 19th International Colloquium on Mechanical Fatigue of Metals: Book of Abstracts. Porto, p. 25-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Surface topography effects on the fatigue strength of cast aluminum alloy AlSi8Cu3

    Leitner, M., Stoschka, M., Fröschl, J. & Wiebesiek, J., 14 Jun 2018, In: Materials Performance and Characterization. 7, 2, p. 148 - 164

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Development of a generalized Kitagawa diagram for cast G21Mn5 steel

    Schuscha, M., Leitner, M. & Stoschka, M., 25 May 2018, In: MATEC Web of Conferences . 2018, 165, 8 p., 14010.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Fatigue strength characterization of Al-Si cast material incorporating statistical size effect

    Aigner, R., Leitner, M. & Stoschka, M., 25 May 2018, In: MATEC Web of Conferences . 165, 14002.

    Research output: Contribution to journal › Conference article › peer-review

  51. Published

    Fatigue strength assessment of welded mild steel joints containing bulk imperfections

    Leitner, M., Murakami, Y., Farajian, M., Remes, H. & Stoschka, M., 1 May 2018, In: Metals : open access journal . 8, 5, 306.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Impact of angular distortion on the fatigue performance of high-strength steel T-joints in as-welded and high frequency mechanical impact-treated condition

    Ottersböck, M. J., Leitner, M. & Stoschka, M., 1 May 2018, In: Metals : open access journal . 8, 5, 302.

    Research output: Contribution to journal › Article › Research › peer-review

  53. E-pub ahead of print

    Numerical fatigue assessment of welded and HFMI-treated joints by notch stress/strain and fracture mechanical approaches

    Leitner, M., Simunek, D., Shah, S. F. & Stoschka, M., 23 Feb 2018, (E-pub ahead of print) In: Advances in Engineering Software. 120.2018, June, p. 96-106 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Betriebsfestigkeitsbewertung gegossener Bauteile aus Aluminium und Stahl

    Aigner, R., Pomberger, S., Schuscha, M., Leitner, M. & Stoschka, M., 21 Feb 2018, In: Gießerei-Rundschau. 2018, 01, p. 7-13

    Research output: Contribution to journal › Article › Research

  55. Published

    Lifetime assessment of cast aluminium components based on CT-evaluated microstructural defects

    Aigner, R., Stoschka, M., Leitner, M., Schneller, W. & Thuswaldner, J., 6 Feb 2018. 1 p.

    Research output: Contribution to conference › Poster › Research

  56. Published

    Fatigue Strength Assessment of Welded Mild Steel Joints Containing Bulk Imperfections

    Leitner, M., Murakami, Y., Farajian, M., Remes, H. & Stoschka, M., 2018, International Institute of Welding: IIW-Document XIII-WG4-162-18.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Modification of a Defect-Based Fatigue Assessment Model for Al-Si-Cu Cast Alloys

    Aigner, R., Leitner, M., Stoschka, M., Hannesschläger, C., Wabro, T. & Ehart, R., 2018, In: Materials. 11, 12

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 Next
View graph of relations

Contact

Phone: 1455

Latest Research Output

View more (208)