Michael Panzenböck

1 - 50 out of 311Page size: 50

Research output

  1. 2018
  2. Published

    Multi-Scale Microstructural Characterization: The Role of Classic and High-Resolution Metallography in the Developement of Modern High-Performance Materials

    Schnitzer, R., Hofer, C., Mayer, S., Panzenböck, M., Holec, D. & Clemens, H., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 9, p. 584-602 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Scanning electron microscope: An essential equipment of failure analysis

    Panzenböck, M., Freitag, C., Hawranek, G., Mendez Martin, F. & Rashkova, B., 2018.

    Research output: Contribution to conference › Poster › Research

  4. Published

    Skalenübergreifende Gefügechatakterisierung - Die Rolle der klassischen und hochauflösenden Metallographie bei der Entwicklung moderner Hochleistungswerkstoffe

    Schnitzer, R., Hofer, C., Mayer, S., Panzenböck, M., Holec, D. & Clemens, H., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 23-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. 2017
  6. Published

    Damage-Sequences of Mountain Anchors

    Freitag, C. & Panzenböck, M., 23 Feb 2017, In: Practical metallography = Praktische Metallographie. 54.2017, 1, p. 6-18 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Fliegende Zähne - Ablösung von Schneidsegmenten bei einer Trenneinrichtung

    Panzenböck, M. & Stergar, E., 2017, Praktische Metallographie Sonderband 51. p. 93-98

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Werkstoffcharakterisierung mittels hochauflösender dreidimensionaler Atomsondentomographie

    Mayer, S., Maier-Kiener, V., Mendez Martin, F., Panzenböck, M., Rashkova, B. & Clemens, H., 2017, In: Jahresmagazin Materialographie, Metallographie : Ingenieurwissenschaften ... : im Fokus. 2017, p. 56-60 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. 2016
  10. Published

    Failure of Hot-Dip Galvanized Steel Parts : Versagen von feuerverzinkten Stahlbauteilen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P. & Kaiser, R., Oct 2016, In: Practical metallography = Praktische Metallographie. 53.2016, 10, p. 641-651 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Influence of different types of localized corrosion on the fatigue behavior of an austenitic stainless steel

    Visser, A., Mori, G., Pippan, R., Kapp, M., Fluch, R., Leitner, H., Panzenböck, M. & Holper, B., 1 Jan 2016, NACE International - Corrosion Conference and Expo 2016. p. 3201-3210 10 p. (NACE - International Corrosion Conference Series; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Computertomographie und deren Anwendung in der Schadensanalytik

    Panzenböck, M., Borchert, M. & Freitag, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  13. Published

    Computertomographie und deren Anwendung in der Schadensanalytik

    Panzenböck, M., Borchert, M. & Freitag, C., 2016, Sonderband der Praktischen Metallographie: Fortschritte in der Metallographie. Vol. 48. p. 125-130 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Die Rolle der Metallographie bei der Charakterisierung von Hochleistungswerkstoffe

    Mayer, S., Rashkova, B., Mendez Martin, F., Primig, S., Panzenböck, M. & Clemens, H., 2016, In: Jahresmagazin Materialographie, Metallographie : Ingenieurwissenschaften ... : im Fokus. 2016, p. 82-87 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Failure of Mountain-Anchors as a Consequence of Hydrogen Embrittlement

    Panzenböck, M. & Freitag, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  16. Published

    Risse in feuerverzinkten Stahlbauteilen

    Freitag, C. & Panzenböck, M., 2016.

    Research output: Contribution to conference › Presentation › Research

  17. Published

    Risse in feuerverzinkten Stahlbauteilen

    Freitag, C. & Panzenböck, M., 2016, Sonderband der Praktischen Metallographie: Fortschritte in der Metallographie. DGM, Vol. 48. p. 131-136 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. 2015
  19. Published

    Einfluss der chemischen Zusammensetzung auf die Lötrissigkeit allgemeiner Baustähle

    Schütz, P., Panzenböck, M. & Mendez Martin, F., 2015, p. 247.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Kleine Ursache, große Wirkung - Versagen von Bergankern-

    Freitag, C. & Panzenböck, M., 2015, p. 285.

    Research output: Contribution to conference › Poster › Research › peer-review

  21. Published

    Metallography - A Powerful Instrument for Material Characterisation, Material Development and Failure Analysis

    Panzenböck, M., Hawranek, G., Mendez Martin, F., Mayer, S., Pölzl, S., Schütz, P., Primig, S., Rashkova, B. & Clemens, H., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  22. Published

    Schädigungssequenzen an Litzenanker

    Freitag, C. & Panzenböck, M., 2015, Sonderbände der praktischen Metallographie 47. p. 209-214

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Schädigungssequenzen von Litzenankern - Einfache Bestimmungsmethoden zur Ermittlung von Schädigungssequenzen

    Freitag, C. & Panzenböck, M., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  24. Published

    The role of metallography in the development and characterization of high-performance materials

    Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2015, In: Practical metallography = Praktische Metallographie. 52.2015, 2, p. 59-74 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Versagen von feuerverzinkten Stahlbauteilen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P. & Kaiser, R., 2015, Sonderbänder der praktischen Metallographie 47. p. 203-208

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Versagen von feuerverzinkten Stahlbauteilen - Gefüge und Versagen von Werkstoffen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P., Kaiser, R., Spiradek-Hahn, K. & Brabetz, M., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  27. Published

    Vorzeitiges Versagen von profilierten Stahlrohren

    Schütz, P. & Panzenböck, M., 2015, p. 265.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. 2014
  29. Published

    Komplementäre Werkstoffcharakterisierung am Department Metallkunde und Werkstoffprüfung

    Mayer, S., Panzenböck, M. & Clemens, H., 6 Aug 2014, In: Dialog : Materialwissenschaft und Werkstofftechnik . p. 56-57

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    On the slowdown of the crack propagation rate of austenitic stainless steels in corrosive environment

    Kapp, M., Fluch, R., Martinez, C., Pippan, R., Mori, G., Vichytil, C., Sonnleitner, R. & Panzenböck, M., 1 Jan 2014, International Corrosion Conference series / National Association of Corrosion Engineers. (NACE - International Corrosion Conference Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Characterization of the crack initiation and crack propagation behavior of welded steels by means of the replica technique

    Panzenböck, M., Horn, A., Posch, G. & Clemens, H., 2014, In: Practical metallography = Praktische Metallographie. 51, p. 557-567

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Corrosion Fatigue of Austenitic Stainless Steel in Different Hot Chloride Solutions

    Visser, A., Mori, G., Panzenböck, M. & Pippan, R., 2014, Corrosion Fatigue of Austenitic Stainless Steel in Different Hot Chloride Solutions. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Die Rolle der Metallographie bei Entwicklung und Charakterisierung von Hochleistungswerkstoffen

    Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2014, Sonderbände der Praktischen Metallographie 46. p. 3-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Fortschritte in der Metallographie 46

    Mayer, S. (Editor), Panzenböck, M. (Editor) & Clemens, H. (Editor), 2014, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  35. Published

    Schwingungsrisskorrosion rostfreier austenitischer Stähle in heißen chloridhaltigen Lösungen

    Visser, A., Mori, G., Panzenböck, M., Kapp, M., Leitner, H., Fluch, R. & Holper, B., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 300-301

    Research output: Contribution to journal › Article › Research › peer-review

  36. 2013
  37. Published

    Corrosion fatigue properties of austenitic stainless steels with different composition and strength in chloride solutions

    Visser, A., Vichytil, C., Mori, G., Vidic, J., Pippan, R., Panzenböck, M. & Kapp, M., 1 Dec 2013, EUROCORR 2013 - European Corrosion Congress. (EUROCORR 2013 - European Corrosion Congress).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Charaktersierung des Rissinitierung- und Rissfortschrittverhaltens von Schweißverbindungen hochfester Baustähle mittels Replika-Technik

    Panzenböck, M., Horn, A., Posch, G. & Clemens, H., 2013, Prakt. Met. Sonderband 45. p. 127-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Corrosion fatigue and repassivation investigations of CrNiMo austenitic stainless steels in chloride environment

    Visser, A., Vichytil, C., Mori, G., Vidic, K., Pippan, R., Panzenböck, M., Kapp, M. & Fluch, R., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 384-390

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Influence of welding parameters on the fatigue behaviour of high strength steels

    Horn, A., Panzenböck, M., Clemens, H. & Posch, G., 2013, In: Materialwissenschaft und Werkstofftechnik. 44, p. 889-896

    Research output: Contribution to journal › Article › Research › peer-review

  41. 2012
  42. Published

    Crack growth rates and corrosion fatigue of austenitic stainless steels in high chloride solutions

    Vichytil, C., Mori, G., Pippan, R., Panzenböck, M. & Fluch, R., 2012, Key engineering materials. Vol. 488-489. p. 97-100 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  43. Published

    Fatigue and cracking behaviour of austenitic CrNiMo and CrMnN steels in chloride containing environment at elevated temperature

    Vichytil, C., Mori, G., Pippan, R., Panzenböck, M. & Fluch, R., 2012, Fracture Mechanics for Durability, Reliability and Safety. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Schadensanalytik

    Panzenböck, M., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. 2011
  46. Published

    10. Tagung Gefüge und Bruch

    Panzenböck, M. (Co-editor), Danzer, R. (Co-editor) & Pohl, M. (Co-editor), 2011, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  47. Published

    A Novel Preparation Method for Lean Duplex Steels

    Panzenböck, M., Ragger, K., Chladil, H. & Clemens, H., 2011,

    Proceedings in Microscopy & Microanalysis

    .     p. 1036-1037

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Corrosion Fatigue Investigations of CrNiMoN Austenitic Stainless Steels

    Vichytil, C., Mori, G., Panzenböck, M. & Fluch, R., 2011, NACE Corrosion 2011, Conference and EXPO. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Cracking behaviour under cyclic loading of austenitic stainless steels with different alloying concepts

    Vichytil, C., Mori, G., Panzenböck, M., Pippan, R. & Fluch, R., 2011, 18th International Corrosion Congress, Corrosion Control, Contributing to a Sustainable Future for All. p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Eigenschaften von Lean-Duplex Stählen nach Auslagerung in kritischen Temperaturbereichen

    Ragger, K., Panzenböck, M. & Chladil, H., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Ermüdung geschweißter hochfester Stähle

    Horn, A., Panzenböck, M. & Posch, G., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  52. Published

    Mechanical Properties and Fatigue behaviour of copper interconnect Ribbon

    Pedevilla, M., Panzenböck, M., Clemens, H. & Mitrovitz, N., 2011, Proceedings 26th European Photovoltaic Solar Energy Conference and Exhibition. p. 3547-3549

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Microstructural changes during annealing of LDX 2101 and SAF 2304 in the temperature range of 475 and 700 °C and their effects on the mechanical properties and corrosion behaviour

    Ghanimi, Y., Ragger, K., Panzenböck, M., Clemens, H. & Chladil, H., 2011,

    Proceedings of Stainless Steel World Conference & EXPO

    .     p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Totalversagen eines Regelventils

    Prinz, C. & Panzenböck, M., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  55. 2010
  56. Published

    Corrosion Fatigue Investigations on Austenitic Stainless Steels with Different Alloying Concepts

    Vichytil, C., Mori, G., Panzenböck, M., Sonnleitner, R. & Fluch, R., 2010, NACE Corrosion 2010, Conference and EXPO. p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Corrosion fatigue of a manganese-nitrogen stabilized austenitic stainless steel

    Sonnleitner, R., Mori, G., Panzenböck, M. & Fluch, R., 2010, In: Materials and Corrosion. 61, p. 97-104

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Fracture mechanic investigations of austenitic stainless steels in different cold worked states

    Vichytil, C., Mori, G., Panzenböck, M., Sonnleitner, R., Pippan, R. & Fluch, R., 2010, EUROCORR 2010, The European Corrosion Conference. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Mechanisches und chemisches Verhalten von Lean-Duplex-Stählen nach Wärmebehandlungen in kritischen Temperaturbereichen

    Ragger, K., Panzenböck, M., Clemens, H. & Chladil, H., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 394-401

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 Next
View graph of relations

Contact

Phone: 4230

Latest Research Output

View more (311)