Menghuai Wu

201 - 250 out of 427Page size: 50

Research output

  1. 2014
  2. Published

    Influence of dendritic morphology on the calculation of macrosegregation in steel ingot

    Li, J., Wu, M. H., Ludwig, A., Kharicha, A. & Schumacher, P., 1 Jan 2014, Solidification and Gravity VI. Trans Tech Publications, p. 121-126 6 p. (Materials Science Forum; vol. 790-791).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Simulation of solidification and convection of NH4Cl-H2O solution in a water-cooled copper mold

    Ahmadein, M., Wu, M., Stefan Kharicha, M., Kharicha, A. & Ludwig, A., 1 Jan 2014, Solidification and Gravity VI. Trans Tech Publications, p. 247-252 6 p. (Materials Science Forum; vol. 790-791).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    3D Lattice Boltzmann flow simulations through dendritic mushy zones

    Ludwig, A., Kharicha, A., Hölzl, C., Domitner, J., Wu, M. & Pusztai, T., 2014, In: Engineering analysis with boundary elements. 45, p. 29-35

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Annual report of CD-Lab activity during 2014, Project progress and achievements.

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Vakhrushev, A., 2014

    Research output: Book/Report › Commissioned report › Transfer

  6. Published

    A numerical study of the influence of pouring technique on the as-cast structure of Al-Cu ingots

    Ahmadein, M., Wu, M., Schumacher, P. & Ludwig, A., 2014, Materials Science Forum. Vol. 790-791.2014. p. 67-72 (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  7. Published

    "A parameter study on the effect of slag electrode conductivity on the solidification of a large scale ESR ingot"

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B. & Ramprecht, M., 2014, 2nd Int. Conf. Ingot Casting Rolling Forging, on data storage device..

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Evaluation of a 5-phase mixed columnar-equiaxed solidification model with a benchmark solidification experiment of NH4Cl-H2O solution

    Ahmadein, M., Wu, M., Stefan Kharicha, M., Kharicha, A. & Ludwig, A., 2014, Materials Science Forum. Vol. 790-791.2013. p. 247-252 6 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  9. Published

    "Experimental verification of the 3-phase continuous casting simulation using a water model"

    Vakhrushev, A., Ludwig, A. & Wu, M., 2014, 8th European Continuous Casting Conf. on data storage device.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    "Free surface deformation by the application of electrical currents"

    Kharicha, A., Teplyakov, I., Ivochkin, Y., Wu, M., Ludwig, A. & Guseva, A., 2014, 9th Int. Pamir Conf. on Fundamental and applied MHD, Thermo acoustic and Space technologies. p. 245-249

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    "How to get a smooth ESR Ingot surface?"

    Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 2014, 2nd Int. Conf. Ingot Casting Rolling Forging on data storage device..

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Influence of crystal morphological parameters on the solidification of ESR ingot

    Karimi Sibaki, E., Kharicha, A., Korp, J., Wu, M. & Ludwig, A., 2014, Materials Science Forum. Vol. 790-791.2014. p. 396-401 (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  13. Published

    Influence of dendritic morphology on the calculation of macrosegregation in steel ingot

    Li, J., Wu, M., Ludwig, A., Kharicha, A. & Schumacher, P., 2014, Materials Science Forum Vols. 790-791. p. 121-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Modeling diffusion-governed solidification of ternary alloys – Part 2:Macroscopic transport phenomena and macrosegregation

    Wu, M., Li, J., Ludwig, A. & Kharicha, A., 2014, In: Computational materials science. 92, p. 267-285

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Modeling of Multiscale and Multiphase Phenomena in Materials Processing

    Ludwig, A., Kharicha, A. & Wu, M., 2014, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 45.2014, 1, p. 36-43 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Numerical study of the influence of diffusion-governed growth kinetics of ternary alloy on macrosegregation

    Wu, M. H., Kharicha, A. & Ludwig, A., 2014, Materials Science Forum. Trans Tech Publications, p. 85-90 6 p. (Materials Science Forum; vol. 790-791).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Observation of flow regimes and transitions during a columnar solidification experiment

    Stefan Kharicha, M., Kharicha, A., Wu, M. & Ludwig, A., 2014, In: Fluid Dynamics Research. 46, p. 1-21

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    On Melting of Electrodes during Electro-Slag Remelting

    Kharicha, A., Ludwig, A. & Wu, M., 2014, In: ISIJ international. 54, p. 1621-1628

    Research output: Contribution to journal › Article › Research › peer-review

  19. 2013
  20. E-pub ahead of print

    Modeling the Effects of Strand Surface Bulging and Mechanical Softreduction on the Macrosegregation Formation in Steel Continuous Casting

    Domitner, J., Wu, M., Kharicha, A., Ludwig, A., Kaufmann, B., Schaden, T. & Reiter, J., 24 Oct 2013, (E-pub ahead of print) In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45.2014, 3, p. 1415-1434 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Modeling diffusion-governed solidification of ternary alloys - Part 1: Coupling solidification kinetics with thermodynamics

    Wu, M., Li, J., Ludwig, A. & Kharicha, A., 13 Jun 2013, In: Computational materials science. 79, p. 830-840 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Prediction of the as-cast structure of Al-4.0 Wt Pct Cu ingots

    Ahmadein, M., Wu, M., Li, J. H., Schumacher, P. & Ludwig, A., 1 Jun 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, 6, p. 2895-2903 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Contribution of the mould current to the ingot surface quality in the electroslag remelting process

    Kharicha, A., Sibaki, E. K., Wu, M. & Ludwig, A., 1 Jan 2013, International Symposium on Liquid Metal Processing and Casting 2013, LMPC 2013. p. 95-99 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Variation of the resistance during the electrode movement in the electroslag remelting process

    Kharicha, A., Wu, M. & Ludwig, A., 1 Jan 2013, International Symposium on Liquid Metal Processing and Casting 2013, LMPC 2013. p. 145-150 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    "2D simulation of ESR process"

    Karimi Sibaki, E., Kharicha, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    2nd annual Report "A volume-Averaging Solidification Model Incorporating Dendritic Crystal Morphology: Model Description, Improvement, and Verification"

    Ahmadein, M., Wu, M. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    3D magneto-hydrodynamic simulation of the liquid region in an electro-slag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2013, In: International journal of heat and mass transfer.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    "A meandering sinking flow as possible explanation for the thermohaline staircaises in oceans"

    Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, "A meandering sinking flow as possible explanation for the thermohaline staircaises in oceans".

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    A Numerical Study on the Influence of the Frequency of the Applied AC Current on the Electroslag Remelting Process"

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B. & Ramprecht, M., 2013, A Numerical Study on the Influence of the Frequency of the Applied AC Current on the Electroslag Remelting Process". p. 13-19

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Application of microprobe analysis to the reconstruction and characterization of dendritic structures

    Domitner, J., Kharicha, A., Wu, M. & Ludwig, A., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, p. 607-616

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    "Contribution of the Mould Current to the Ingor Surface quality in the Electroslag Remelting Process"

    Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 2013, "Contribution of the Mould Current to the Ingor Surface quality in the Electroslag Remelting Process". p. 95-99

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    "Discrete Phase Modelling for Continuous Casting: Model Verification and Application"

    Vakhrushev, A., Ludwig, A., Wu, M., Tang, Y., Nitzl, G. & Hackl, G., 2013, "Discrete Phase Modelling for Continuous Casting: Model Verification and Application".

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    "Evaluation of a 5-phase mixed columnar-equiaxed solidification model with a benchmark solidification experiment of NH4Cl-H2O solution

    Ahmadein, M., Wu, M., Stefan Kharicha, M., Kharicha, A. & Ludwig, A., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  34. Published

    Exploration of the double-diffusive convection during dendritic solidification with a combined volume-averaging and cellular-automaton model

    Stefan-Kharicha, M., Wu, M., Ludwig, A. & Kharicha, A., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Final Report on the short-term project "Simulation of solidification and macrosegregation in large round ingots produced by vertical continuous casting

    Li, J., Wu, M. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  36. Published

    “MHD and multiphase phenomena in an industrial scale electro-slag remelting process”

    Kharicha, A., Wu, M. & Ludwig, A., 2013, “MHD and multiphase phenomena in an industrial scale electro-slag remelting process”.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    "MHD in electric current-induced flow"

    Kharicha, A., Wu, M. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  38. Published

    "MHD instabilities of bath/liquid metal interface”

    Kharicha, A., Ludwig, A. & Wu, M., 2013, "MHD instabilities of bath/liquid metal interface”.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    "Minutes of the autumn meeting on project "Importance of Hydrodynamics In Peritectic Steel Thin Slab Casting"

    Vakhrushev, A., Ludwig, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  40. Published

    "Minutes of the fall meeting on project "Electromagnetic processing of dual-phase fluids"

    Karimi Sibaki, E., Wu, M. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Minutes of the spring meeting on project "Electromagnetic processing of dual-phase fluids"

    Karimi Sibaki, E., Wu, M. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Minutes of the spring meeting on project "Importance of Hydrodynamics in Peritectic Steel Thin Slab Casting"

    Vakhrushev, A., Ludwig, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Minutes of the summer meeting on project "Electromagnetic processing of dual-phase fluids"

    Karimi Sibaki, E., Wu, M. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer

  44. Published

    Minutes of the winter meeting on project "Importance of Hydrodynamics in PEritectic Steek Thin Slab Casting"

    Vakhrushev, A., Ludwig, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer

  45. Published

    Modeling of the flow-solidification interaction in thin slab casting

    Vakhrushev, A., Wu, M., Ludwig, A., Tang, Y., Hackl, G. & Nitzl, G., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Modeling the effect of strand surface bulging and mechanical softreduction on the macrosegregation formation in steel continuous casting

    Domitner, J., Wu, M., Kharicha, A., Ludwig, A., Kaufmann, B., Reiter, J. & Schaden, T., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science .

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    "Modelling and Simulation of Thin-Slap Casting"

    Vakhrushev, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Modelling diffusion-governed solidification of ternary alloys - Part 1: Coupling solidification kinetics with thermodynamics

    Wu, M., Li, J., Ludwig, A. & Kharicha, A., 2013, In: Computational materials science. 79, p. 830-840

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Modelling macrosegregation in a 2.45 ton steel ingot

    Li, J., Wu, M., Ludwig, A. & Kharicha, A., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Numerical investigation of shell formation in thin slab casting of funnel-type mould

    Vakhrushev, A., Wu, M., Ludwig, A., Tang, Y., Hackl, G. & Nitzl, G., 2013, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    "Numerical modeling of centrifugal casting: FLUENT vs. own code in MATLAB"

    Bohacek, J., Kharicha, A., Ludwig, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. Published

    "Numerical study of macrosegregation in steel ingot"

    Li, J. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1 2 3 4 5 6 7 8 9 Next
View graph of relations

Contact

Phone: 3103

Latest Research Output

View more (427)