Menghuai Wu

151 - 200 out of 427Page size: 50

Research output

  1. 2017
  2. Published

    Volume Average Modelling of Equiaxed-to-Columnar Transition in a Vertically Solidified Pb-18 wt.%Sn Cavity

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2017, p. 312-16. 6 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  3. Published

    Volume Average Modelling of Equiaxed-to-Columnar Transition in a Vertically Solidified Pb-18 wt.%Sn Cavity

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2017, SP17.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. 2016
  5. Published

    A columnar & non-globular equiaxed mixed three-phase model based on thermosolutal convection and grain movement

    Li, J., Ge, H., Wu, M., Ludwig, A. & Li, J., 11 Sept 2016, In: Jinshu-xuebao : Acta metallurgica Sinica. 52.2016, 9, p. 1096-1104 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    An attempt to model electrode change during the ESR process

    Karimi-Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B., Scheriau, A., Kubin, M. & Ramprecht, M., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012006.

    Research output: Contribution to journal › Conference article › peer-review

  7. Published

    A numerical study on electrochemical transport of ions in calcium fluoride slag

    Karimi-Sibaki, E., Kharicha, A., Wu, M. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012008.

    Research output: Contribution to journal › Conference article › peer-review

  8. Published

    Assessment of different turbulence models for the motion of non-metallic inclusion in induction crucible furnace

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012026.

    Research output: Contribution to journal › Conference article › peer-review

  9. Published

    Simulation of macrosegregation in a large vertical continuous casting of steel

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012032.

    Research output: Contribution to journal › Conference article › peer-review

  10. Published

    Transient melting of an ESR electrode

    Kharicha, A., Karimi-Sibaki, E., Bohacek, J., Wu, M. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012003.

    Research output: Contribution to journal › Conference article › peer-review

  11. Published

    Simulation in Metallurgical Processing: Recent Developments and Future Perspectives

    Ludwig, A., Wu, M. & Kharicha, A., 27 Jun 2016, In: JOM. 68.2016, 8, p. 2191-2197 7 p.

    Research output: Contribution to journal › Review article › peer-review

  12. Published

    On Validity of Axisymmetric Assumption for Modeling an Industrial Scale Electroslag Remelting Process

    Karimi Sibaki, E., Kharicha, A., Bohacek, J., Wu, M. & Ludwig, A., 1 Feb 2016, In: Advanced engineering materials. 18.2016, 2, p. 224-230 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Simulation of the Electric Signal During the Formation and Departure of Droplets in the Electroslag Remelting Process

    Kharicha, A., Wu, M., Ludwig, A. & Karimi Sibaki, E., 25 Jan 2016, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 47.2016, 2, p. 1427-1434 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    On the importance of modeling 3D shrinkage cavities for the prediction of macrosegregation in steel ingots

    Ludwig, A., Wu, M. & Kharicha, A., 1 Jan 2016, p. 3-10. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  15. Published

    Free-surface flow in horizontally rotating cylinder: experiment and simulation

    Bohacek, J., Kharicha, A., Ludwig, A., Wu, M., Paar, A., Brandner, M., Elizondo, L. & Trickl, T., 2016, In: IOP Conference Series: Materials Science and Engineering. p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Influence of forced convection on solidification and remelting in the developing mushy zone

    Wu, M., Vakhrushev, A., Ludwig, A. & Kharicha, A., 2016, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Modelling Al-4wt.%Cu as-cast structure using equiaxed morphological parameters deduced from in-situ synchrotron X-ray radiography

    Ahmadein, M., Wu, M., Reinhart, G. & Nguyen-Thi, H., 2016, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Numerical analysis of macrosegregation in vertically solidified Pb-Sn test castings - Part I: Columnar solidification

    Wu, M., Zeng, Y., Kharicha, A. & Ludwig, A., 2016, In: Computational materials science.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Numerical analysis of macrosegregation in vertically solidified Pb-Sn test castings – Part II : Equiaxed solidification

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2016, In: Computational materials science.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Numerical analysis of solidification and macrosegregation in a semi-continuously cast steel strand

    Zheng, Y. (Co-editor), Wu, M., Kharicha, A. (Co-editor) & Ludwig, A. (Co-editor), 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  21. Published

    Numerical investigation of solidification and CET of the transparent alloy NPG-37.5 wt.% DC in microgravity “TRACE” experiment

    Ahmadein, M., Wu, M., Sturz, L., Zimmermann, G. & Ludwig, A., 2016, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Simulation of the Electrical Signal During the Formation and Departure of Droplets in the Electro Slag Remelting Process

    Kharicha, A., Wu, M., Ludwig, A. & Karimi Sibaki, E., 2016, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Simulation of thermos-solutal convection induced macrosegregation in a Sn-10% Pb alloy benchmark during columnar solidification

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2016, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Simulation of Turbulent Melt Flow and Deposition of Non-metallic Inclusions on Nozzle Wall of a Clogging Simulator

    Barati, H. (Co-editor), Wu, M., Kharicha, A. (Co-editor) & Ludwig, A. (Co-editor), 2016.

    Research output: Contribution to conference › Paper › peer-review

  25. 2015
  26. Published

    On Macrosegregation

    Ludwig, A., Wu, M. & Kharicha, A., 1 Nov 2015, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 46, 11, p. 4854-4867 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Simulation of Crystal Sedimentation and Viscoplastic Behavior of Sedimented Equiaxed Mushy Zones

    Ludwig, A., Vakhrushev, A., Wu, M., Holzmann, T. & Kharicha, A., 25 Sept 2015, In: Transactions of the Indian Institute of Metals. 68, 6, p. 1087-1094 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. E-pub ahead of print

    A Dynamic Mesh-Based Approach to Model Melting and Shape of an ESR Electrode

    Karimi-Sibaki, E., Kharicha, A., Bohacek, J., Wu, M. & Ludwig, A., 11 Jun 2015, (E-pub ahead of print) In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 46.2015, 5, p. 2049-2061 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Analysis of macrosegregation formation and columnar-to-equiaxed transition during solidification of Al-4 wt.%Cu ingot using a 5-phase model

    Ahmadein, M., Wu, M. & Ludwig, A., 1 May 2015, In: Journal of crystal growth. 417, p. 65-74 10 p., 22363.

    Research output: Contribution to journal › Article › Research › peer-review

  30. E-pub ahead of print

    An approximate Riemann solver for shallow water equations and heat advection in horizontal centrifugal casting

    Bohacek, J., Kharicha, A., Ludwig, A. & Wu, M., 30 Apr 2015, (E-pub ahead of print) In: Journal of computational and applied mathematics. 267.2015, 15 September, p. 179-194 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Experimental and numerical analysis of free surface deformation in an electrically driven flow

    Kharicha, A., Teplyakov, I., Ivochkin, Y., Wu, M., Ludwig, A. & Guseva, A., 1 Apr 2015, In: Experimental Thermal and Fluid Science. 62, p. 192-201 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    An approximate Riemann solver for two layer shallow water equations in horizontal centrifugal casting

    Bohacek, J., Kharicha, A., Ludwig, A., Wu, M., Paar, A., Brandner, M., Elizondo, L. & Trickl, T., 2015, 6th. Int. Conf. "SteelSim 2015", Bordolino, Italy, on data storage device.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    An attempt to model electrode change during the ESR process

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B., Scheriau, A., Kubin, M. & Ramprecht, M., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    An attempt to model shrinkage cavity coupled with macrosegregation in steel ingots

    Wu, M., Ludwig, A. & Kharicha, A., 2015, 6th. Int. Conf. "SteelSim 2015", Bordolino, Italy, on data storage device.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    A numerical study on electrochemical transport of ions in calcium fluoride slag

    Karimi Sibaki, E., Kharicha, A., Wu, M. & Ludwig, A., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    A scale adaptive dendritic envelope model of solidification at mesoscopic scales

    Kharicha, A., Stefan-Kharicha, M., Ludwig, A. & Wu, M., 2015, In: IOP Conference Series: Materials Science and Engineering. 84.2015, 9 p., 012032.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    A shallow layer model predicting the zinc film thickness during thecontinuous hot-dip galvanizing process

    Kharicha, A., Pfeiler, C., Bohacek, J., Ludwig, A., Wu, M., Mogeritsch, J., Angelini, G. & Riener, C. K., 2015.

    Research output: Contribution to conference › Paper › peer-review

  38. Published

    Assessment of Different Turbulence Models for the Motion of Non-metallic Inclusion in Induction Crucible Furnace

    Barati, H., Wu, M., Ludwig, A. & Kharicha, A., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Benchmark experiments and numerical modelling of the columnar-equiaxed dendritic growth in the transparent alloy Neopentylglycol-(d)Camphor

    Sturz, L., Wu, M., Zimmermann, G., Ludwig, A. & Ahmadein, M., 2015, In: IOP Conference Series: Materials Science and Engineering. 2015, 84, 8 p., 012086.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Experimental and numerical analysis of free surface deformationin an electrically driven flow

    Kharicha, A., Teplyakov, I., Y., I., Wu, M., Ludwig, A. & Guseva, A., 2015, In: Experimental Thermal and Fluid Science. 62, p. 192-201

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Modelling As-Cast Structure and Macrosegregation in Ingot Casting

    Wu, M., Kharicha, A. & Ludwig, A., 2015, In: Materials China. 34, p. 640-651

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Modelling of macrosegregation in direct chill casting considering columnar-to-equiaxed transition using 3-phase Eulerian approach

    Hao, J., Lin, Y. J., Nie, Y., Wu, M. & Ludwig, A., 2015, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Modified shallow water equations with application for horizontal centrifugal casting of rolls

    Kharicha, A., Bohacek, J., Ludwig, A. & Wu, M., 2015, In: Journal of Fluids Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Recent Developments and Future Perspectives in Simulation of Metallurgical Processes

    Ludwig, A., Wu, M. & Kharicha, A., 2015, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research

  45. Published

    Simulation of macrosegregation in a large vertical continuous casting of steel

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Transient melting of an ESR electrode

    Kharicha, A., Karimi Sibaki, E., Bohacek, J., Wu, M. & Ludwig, A., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Transport phenomena during solidification of a vertical casting of steel: a multiphase numerical study

    Zheng, Y., Wu, M. & Kharicha, A., 2015, 6th. Int. Conf. "SteelSim 2015", Bordolino, Italy, on data storage device.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Two-phase modelling of equiaxed crystal sedimentation and thermomechanic stress development in the sedimented packed bed

    Ludwig, A., Vakhrushev, A., Holzmann, T., Wu, M. & Kharicha, A., 2015, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Using four-phase Eulerian volume averaging approach to model macrosegregation and shrinkage cavity

    Wu, M., Kharicha, A. & Ludwig, A., 2015, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  50. 2014
  51. Published

    Numerical Study about the Influence of Small Casting Speed Variations on the Metallurgical Length in Continuous Casting of Steel Slabs

    Domitner, J., Wu, M. & Ludwig, A., 3 Jul 2014, In: Steel research international. 86, p. 184-188

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Numerical Investigation of Shell Formation in Thin Slab Casting of Funnel-Type Mold

    Vakhrushev, A., Wu, M., Ludwig, A., Tang, Y., Hackl, G. & Nitzl, G., 20 Feb 2014, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 45.2014, 3, p. 1024-1037 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Simulation of Horizontal Centrifugal Casting: Mold Filling and Solidification

    Bohacek, J., Kharicha, A., Ludwig, A. & Wu, M., 15 Feb 2014, In: ISIJ international. 54.2014, 2, p. 266-274 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Advanced Process Simulation of Solidification and Melting

    Wu, M., Vakhrushev, A., Karimi Sibaki, E., Kharicha, A. & Ludwig, A., 15 Jan 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159.2014, 1, p. 30-40 11 p.

    Research output: Contribution to journal › Article › Research

Previous 1 2 3 4 5 6 7 8 9 Next
View graph of relations

Contact

Phone: 3103

Latest Research Output

View more (427)