Martin Stockinger

1 - 50 out of 91Page size: 50

Research output

  1. 2024
  2. Published

    An Experimental Electrothermomechanical Characterization of Pipe Steels within Elastic–Plastic Range Based on Resistivity Measurement for Oil Country Tubular Goods

    Saberi, S., Weiß, H., Winter, G., Klarner, J. & Stockinger, M., 5 Dec 2024, In: Journal of Materials Engineering and Performance. ??? Stand: 4. Februar 2025, ??? Stand: 4. Februar 2025

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Experimental investigation and numerical simulation of swaging process of tubes for oil country tubular goods

    Saberi, S., Reiter, C., Winter, G., Klarner, J. & Stockinger, M., 1 Oct 2024, In: International Journal on Interactive Design and Manufacturing. ??? Stand: 17.März 2025, ??? Stand: 17.März 2025, 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Parameter Study for the Numerical Analysis of the Wire Arc Additive Manufacturing Process

    Czipin, M. & Stockinger, M. (Co-editor), 23 May 2024.

    Research output: Contribution to conference › Poster › Transfer

  5. Published

    Effect of intercritical annealing on the microstructure and mechanical properties of a PH 13-8 Mo maraging steel

    Rosenauer, A., Teusl, S., Landefeld, A., Brandl, D., Ressel, G., Hönigmann, T., Stadler, M., Turk, C., Maawad, E., Stockinger, M. & Schnitzer, R., Mar 2024, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 895.2024, March, 13 p., 146220.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Multiscale in-situ observations of the micro- and nanostructure of a PH 13-8 Mo maraging steel during austenitization

    Rosenauer, A., Brandl, D., Ressel, G., Hönigmann, T., Stadler, M., Turk, C., Gammer, C., Wiessner, M., Gamsjäger, E., Stockinger, M. & Schnitzer, R., Feb 2024, In: Materials characterization. 208.2024, February, 13 p., 113554.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Industry 4.0 @ Chair of Metal Forming

    Prabitz, K. M., Stockinger, M., Walzl, A., Wenda, A. & Czipin, M., 2024.

    Research output: Contribution to conference › Poster › Transfer

  8. 2023
  9. E-pub ahead of print

    Machine learning driven prediction of mechanical properties of rolled aluminum and development of an in-situ quality control method based on electrical resistivity measurement

    Hartl, K., Sorger, M., Weiß, H. & Stockinger, M., 5 Oct 2023, (E-pub ahead of print) In: Journal of manufacturing processes. 106.2023, 24 November, p. 158-177 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Microstructural refinement by spontaneous recrystallization without prior deformation of a 15-5 PH steel alloy and its mechanism

    Ressel, G., Brandl, D., Hönigmann, T., Lukas, M., Stark, A., Gruber, C., Lukas, S., Stockinger, M. & Kozeschnik, E., 27 Sept 2023, In: Materials and Design. 234.2023, October, 11 p., 112370.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    In Situ Observations of the Microstructural Evolution during Heat Treatment of a PH 13-8 Mo Maraging Steel

    Rosenauer, A., Brandl, D., Ressel, G., Lukas, S., Gruber, C., Stockinger, M. & Schnitzer, R., Jun 2023, In: Advanced engineering materials. 25.2023, 12, 12 p., 2300410.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Characterization of the Anisotropic Behaviour of Inconel 718 Parts Manufactured by Wire Arc Additive Manufacturing

    Hartl, K., Wallis, C., Bielik, M., Curti, P. & Stockinger, M., 21 Apr 2023, Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives. Springer International Publishing, p. 789-805 16 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    An inverse finite element approach for the evaluation of the hot torsion test

    Wenda, A., Haslberger, P., Kaiser, R., Ralph, B. J., Stockinger, M. & Zamberger, S., 18 Mar 2023, p. 6-13. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  14. Published

    Feasibility study for the Finite Element Analysis of Wire-Arc Additive Manufactured Ti-6Al-4V in DEFORM® 12.1

    Czipin, M., Hartl, K. & Stockinger, M., 18 Mar 2023, XLI. Verformungskundliches Kolloquium. p. 32-37 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    The Key Role of Laser Ultrasonics in the Context of Sustainable Production in an I 4.0 Value Chain

    Hartl, K., Sorger, M. & Stockinger, M., 4 Jan 2023, In: Applied Sciences : open access journal. 13.2023, 2, 22 p., 733.

    Research output: Contribution to journal › Review article › peer-review

  16. Published

    Ballistic tests on hot-rolled Ti-6Al-4V plates: Experiments and numerical approaches

    Janda, A., Ralph, B., Demarty, Y., Sorger, M., Ebenbauer, S., Prestl, A., Siller, I., Stockinger, M. & Clemens, H., 2023, In: Defence Technology. 26.2023, August, p. 39-53 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Hyperbaric Welding and Wire Arc Additive Manufacturing for Downhole Applications in the Oil and Gas Industry

    Escobar, S. M. L., Walzl, A., Ravi, K., Prohaska, M., Stockinger, M., Richardson, I. M., Fateh, N. & Hönig, S., 2023, Society of Petroleum Engineers - SPE/IATMI Asia Pacific Oil and Gas Conference and Exhibition, APOG 2023. Society of Petroleum Engineers , (Society of Petroleum Engineers - SPE/IATMI Asia Pacific Oil and Gas Conference and Exhibition, APOG 2023).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    In-Situ HT-EBSD Measurements and Calibration of Multi-class Model for Grain Growth and δ-phase Dissolution Kinetics of Alloy 718

    Raninger, P., Gruber, C., Costin, W., Stanojevic, A., Kozeschnik, E. & Stockinger, M., 2023, Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives, 2023. Ott, E. A., Andersson, J., Sudbrack, C., Bi, Z., Bockenstedt, K., Dempster, I., Fahrmann, M., Jablonski, P., Kirka, M., Liu, X., Nagahama, D., Smith, T., Stockinger, M. & Wessman, A. (eds.). p. 93-106 14 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Intercritical annealing of a PH 13-8 Mo maraging steel

    Rosenauer, A., Brandl, D., Ressel, G., Stadler, M., Stockinger, M. & Schnitzer, R., 2023, 28th IFHTSE 2023 Congress. (28th IFHTSE 2023 Congress).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Local Assessment of Mechanical Properties in Forged Alloy 718 Components Based on the Simulation of the Microstructure Evolution During Production

    Gruber, C., Raninger, P., Stanojevic, A., Godor, F., Gänser, H. P., Marsoner, S. & Stockinger, M., 2023, Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives, 2023. Ott, E. A., Andersson, J., Sudbrack, C., Bi, Z., Bockenstedt, K., Dempster, I., Fahrmann, M., Jablonski, P., Kirka, M., Liu, X., Nagahama, D., Smith, T., Stockinger, M. & Wessman, A. (eds.). p. 49-63 15 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. 2022
  22. Published

    An ABAQUS plugin for rotary draw bending of tight fit pipes

    Naderi, G., Dibajian, S. H., Torshizi, S. E. M., Masoumian, A. & Stockinger, M., 18 Oct 2022, In: International Journal of Pressure Vessels and Piping. 2022, 200, 11 p., 104827.

    Research output: Contribution to journal › Article › Research › peer-review

  23. E-pub ahead of print

    Influence of delta ferrite on the impact toughness of a PH 13-8 Mo maraging steel

    Rosenauer, A., Brandl, D., Ressel, G., Lukas, S., Monschein, S., Stockinger, M. & Schnitzer, R., 19 Sept 2022, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 856.2022, 20 October, 11 p., 144024.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Determination of prior austenite grain-and martensitic substructure size from metallographic etchings using a multi-step image processing algorithm

    Hönigmann, T., Brandl, D. C., Stockinger, M., Gruber, C., Frois, F. & Ressel, G., 20 Jul 2022, In: Praktische Metallographie/Practical Metallography. 59.2022, 7, p. 386-404 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    In-situ investigation of grain size evolution of Alloy 718 using Laser-Ultrasonics

    Hartl, K., Kerschbaummayr, C. & Stockinger, M., 12 Mar 2022, p. 31-38. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  26. 2021
  27. Published

    MUL 4.0: Systematic Digitalization of a Value Chain from Raw Material to Recycling

    Ralph, B. J., Woschank, M., Miklautsch, P., Kaiblinger, A., Sorger, M., Pacher, C., Zsifkovits, H. & Stockinger, M., 3 Nov 2021, In: Procedia Manufacturing. 55, p. 335-342

    Research output: Contribution to journal › Article › Research › peer-review

  28. E-pub ahead of print

    Transformation of a rolling mill aggregate to a cyber physical production system: from sensor retrofitting to machine learning

    Ralph, B. J., Sorger, M., Hartl, K., Schwarz-Gsaxner, A., Messner, F. & Stockinger, M., 24 Oct 2021, (E-pub ahead of print) In: Journal of Intelligent Manufacturing. 33.2022, 2, p. 493-518 27 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Big Data in the Metal Processing Value Chain: A Systematic Digitalization Approach under Special Consideration of Standardization and SMEs

    Sorger, M., Ralph, B. J., Hartl, K., Woschank, M. & Stockinger, M., Oct 2021, In: Applied Sciences : open access journal. 11, 19, p. 9021 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Dry friction under pressure variation of PACVD TiN surfaces on selected automotive sheet metals for the application in unlubricated metal forming

    Frohn-Sörensen, P., Cislo, C., Paschke, H., Stockinger, M. & Engel, B., 15 Jul 2021, In: Wear. 476.2021, July, 9 p., 203750.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    MUL 4.0 – Digitalisierung der Wertschöpfungskette vom Rohmaterial bis hin zum Recycling

    Woschank, M., Ralph, B. J., Kaiblinger, A., Miklautsch, P., Pacher, C., Sorger, M., Zsifkovits, H., Stockinger, M., Pogatscher, S., Antretter, T. & Antrekowitsch, H., 2 Jun 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 166, 6, p. 309-313

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    A new development of four-point method to measure the electrical resistivity in situ during plastic deformation

    Saberi, S., Stockinger, M., Stoeckl, C., Buchmayr, B., Weiss, H., Afsharnia, R. & Hartl, K., 11 May 2021, In: Measurement. 180.2021, August, 109547.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Planning and implementation of a digital shadow for the friction factor quantification of the ECAP process using grey box modeling approach and finite element analysis

    Schwarz, A., Ralph, B. & Stockinger, M., 4 May 2021, In: Procedia CIRP. 99.2021, p. 237-241 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Implementation of a Six-Layer Smart Factory Architecture with Special Focus on Transdisciplinary Engineering Education

    Ralph, B. J., Sorger, M., Schödinger, B., Schmölzer, H.-J., Hartl, K. & Stockinger, M., 22 Apr 2021, In: Sensors. 21.2021, 9, 24 p., 2944.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Machine Learning Driven Prediction of Residual Stresses for the Shot Peening Process Using a Finite Element Based Grey-Box Model Approach

    Ralph, B. J., Hartl, K., Sorger, M., Schwarz-Gsaxner, A. & Stockinger, M., 21 Apr 2021, In: Journal of Manufacturing and Materials Processing. 5.2021, 2, p. 39-59 21 p., 5020039.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Theoretical and experimental investigations of mechanical vibrations of hot hammer forging

    Saberi, S., Fischer, J., Stockinger, M., Tikal, R. & Afsharnia, R., 20 Apr 2021, In: International Journal of Advanced Manufacturing Technology. 114.2021, 9-10, p. 3037-3045 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Simulation of dynamic and meta-dynamic recrystallization behavior of forged Alloy 718 parts using a multi-class grain size model

    Gruber, C., Raninger, P., Stanojevic, A., Godor, F., Rath, M., Kozeschnik, E. & Stockinger, M., Jan 2021, In: Materials. 14, 1, p. 1-15 15 p., 111.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Multi-class grain size model for forged alloy 718 aircraft parts

    Gruber, C., Raninger, P., Stockinger, M. & Bucher, C., 2021, THERMEC 2021 - International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications. Ionescu, M., Sommitsch, C., Poletti, C., Kozeschnik, E. & Chandra, T. (eds.). Trans Tech Publications, p. 499-508 10 p. (Materials Science Forum; vol. 1016 MSF).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. 2020
  40. Published

    Entwicklung einer ECAP Anlage mit integriertem digitalen Schatten

    Schwarz-Gsaxner, A. & Stockinger, M., 9 Dec 2020, Tagungsband 11. Ranshofener Leichtmetalltage: Leichtmetalle, Werkstoff- und Prozesstechnologien im Kontext von Dekarbonisierung und Digitalisierung. p. 80-87 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    An Implementation Approach for an Academic Learning Factory for the Metal Forming Industry with Special Focus on Digital Twins and Finite Element Analysis

    Ralph, B., Schwarz, A. & Stockinger, M., 29 Apr 2020, In: Procedia Manufacturing. 45, 45, p. 253-258 6 p.

    Research output: Contribution to journal › Conference article › peer-review

  42. Published

    Conception, design and finite element analysis of an equal channel angular pressing machine

    Schwarz, A. & Stockinger, M., 21 Mar 2020, Tagungsband XXXIX. Verformungskundliches Kolloquium. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 47-52 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Digitalization and digital transformation in metal forming: key technologies, challenges and current developments of industry 4.0 applications

    Ralph, B. J. & Stockinger, M., 21 Mar 2020, XXXIX. Verformungskundliches Kolloquium: Zauchensee 2020. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 13-23 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Dilatometer experiments to determine the phase transformation kinetics and TRIP behavior for predeformed 20MnB8 steel sheets

    Tomasch, M., Ecker, W., Antretter, T. & Stockinger, M. (Publisher), 2020, XXXIX. Verformungskundliches Kolloquium, Tagungsband. Vol. 39. p. 72-77

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. 2019

  46. Evidence of austenite memory in PH 15-5 and assessment of its formation mechanism

    Brandl, D. C., Lukas, M., Stockinger, M., Ploberger, S. & Ressel, G., 15 Aug 2019, In: Materials and Design. 176.2019, August, 9 p., 107841.

    Research output: Contribution to journal › Article › Research › peer-review

  47. 2018
  48. Published

    Darstellung und Verifizierung einer elektrolytischen Ätzmethode zur Bestimmung ehemaliger Austenitkorngrenzen eines PH15-5 Stahls

    Brandl, D. C., Höfler, L., Stockinger, M., Ploberger, S., Marsoner, S. M. & Ressel, G., 14 Dec 2018, In: Praktische Metallographie/Practical Metallography. 55.2018, 12, p. 800-812 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. E-pub ahead of print

    Experimental and numerical investigations of the γ″ and γ′ precipitation kinetics in Alloy 718

    Drexler, A. K., Oberwinkler, B., Primig, S., Turk, C., Povoden-Karadeniz, E., Heinemann, A., Ecker, W. & Stockinger, M., 6 Mar 2018, (E-pub ahead of print) In: Materials Science and Engineering A. 723.2018, 18 April, p. 314-323 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Development of an automated property simulation tool for direct aged alloy 718 engine disk forgings

    Stockinger, M., Stanojevic, A., Wieser, V. & Raninger, P., 1 Jan 2018, Proceedings of the 9th International Symposium on Superalloy 718 and Derivatives: Energy, Aerospace, and Industrial Applications. Ott, E., Sudbrack, C., Liu, X., Dempster, I., Heck, K., Bockenstedt, K., Jablonski, P., Kaplan, M., Andersson, J., Bi, Z., Groh, J. & Nagahama, D. (eds.). Springer International Publishing, p. 353-367 15 p. (Minerals, Metals and Materials Series; vol. 2018-June).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Optimization of the forging process window in respect of AGG, IGG and direct age effect in alloy 718 engine disks

    Stanojevic, A., Bucher, C., Gruber, M., Oberwinkler, B. & Stockinger, M., 1 Jan 2018, Proceedings of the 9th International Symposium on Superalloy 718 and Derivatives: Energy, Aerospace, and Industrial Applications. Ott, E., Sudbrack, C., Liu, X., Dempster, I., Heck, K., Bockenstedt, K., Jablonski, P., Kaplan, M., Andersson, J., Bi, Z., Groh, J. & Nagahama, D. (eds.). Springer International Publishing, p. 691-709 19 p. (Minerals, Metals and Materials Series; vol. 2018-June).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. 2017

  53. Modeling of precipitation strengthening in Inconel 718 including non-spherical γ" precipitates

    Ahmadi, M. R., Rath, M., Povoden-Karadeniz, E., Primig, S., Wojcik, T., Danninger, A., Stockinger, M. & Kozeschnik, E., 15 May 2017, In: Modelling and simulation in materials science and engineering. 25.2017, 5, 17 p., 055005.

    Research output: Contribution to journal › Article › Research › peer-review

  54. 2016
  55. E-pub ahead of print

    Comparison of intergranular strain formation of conventional and newly developed nickel based superalloys

    Wagner, J., Hofmann, M., Van Petegem, S., Krempaszky, C., Hoelzel, M. & Stockinger, M., 15 Mar 2016, (E-pub ahead of print) In: Materials Science and Engineering A. 662.2016, 26 April, p. 303-307 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Integrated process modeling for the mechanical properties optimization of direct aged alloy 718 engine disks

    Oberwinkler, B., Fischersworring-Bunk, A., Hüller, M. & Stockinger, M., 1 Jan 2016, SUPERALLOYS 2016 - Proceedings of the 13th International Symposium on Superalloys. Huron, E., Glatzel, U., Rae, C., Tin, S., Lewis, B., Seetharaman, V., Hardy, M. & Griffin, B. (eds.). Minerals, Metals and Materials Society, p. 513-521 9 p. (Proceedings of the International Symposium on Superalloys; vol. 2016-January).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. 2014

  58. Microstructure and temperature dependence of intergranular strains on diffractometric macroscopic residual stress analysis

    Wimpory, R., Krempaszky, C. & Stockinger, M., 16 Sept 2014, In: Materials Science and Engineering A. 618, p. 271-279 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Yield strength prediction in Ni-base alloy 718Plus based on thermo-kinetic precipitation simulation

    Ahmadi, M. R., Povoden-Karadeniz, E., Whitmore, L., Stockinger, M., Falahati, A. & Kozeschnik, E., 1 Jul 2014, In: Materials Science and Engineering A. 608, p. 114-122 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Characterization of residual stresses by WEDM-assisted dissectioning

    Regener, B., Krempaszky, C., Werner, E., Berhuber, E. & Stockinger, M., 1 Jan 2014, In: IOP Conference Series: Materials Science and Engineering. 10, 1, 012078.

    Research output: Contribution to journal › Conference article › peer-review

Previous 1 2 Next
View graph of relations

Contact

Phone: 5600

Latest Research Output

View more (91)