Martin Leitner

(Former)

151 - 200 out of 204Page size: 50

Research output

  1. 2015
  2. Published

    Fatigue strength of HFMI-treated high-strength steel joints under constant and variable amplitude block loading

    Leitner, M., Gerstbrein, S., Ottersböck, M. J. & Stoschka, M., 2015, In: Procedia Engineering. 101, p. 251-258 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Leichtbaupotential geschweißter Strukturen aus hochfestem Stahl

    Leitner, M., 2015, In: Schweiß- & Prüftechnik.

    Research output: Contribution to journal › Article › Research

  4. Published

    Local fatigue assessment of welded and high frequency mechanical impact (HFMI) treated joints by simulation

    Simunek, D., Leitner, M. & Stoschka, M., 2015.

    Research output: Contribution to conference › Poster › Research

  5. Published

    Overview of residual stress measurement and fatigue test data for Pneumatic Impact Treated (PIT) joints

    Schäfers, F., Gerster, P. & Leitner, M., 2015.

    Research output: Contribution to conference › Paper

  6. 2014
  7. E-pub ahead of print

    Ermüdungsfestigkeit hochfester Stahlschweißverbindungen: Fatigue Strength of High-strength Welded Steel Joints

    Leitner, M., Stoschka, M., Ottersböck, M. & Simunek, D., 13 Dec 2014, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 160.2015, 1, p. 9-14 6 p.

    Research output: Contribution to journal › Article › Research

  8. Published

    Fatigue strength assessment according to the FKM-guideline in case of non-proportional stresses

    Leitner, B., Fiedler, A. G. & Leitner, M., 1 Sept 2014, In: Konstruktion. 66, 9, p. 76-82 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    A study on the fatigue crack initiation point of longitudinal attachments

    Ottersböck, M., Leitner, M. & Stoschka, M., 17 Mar 2014.

    Research output: Contribution to conference › Presentation › Research

  10. Published

    Fatigue enhancement of thin-walled high-strength steel joints by high frequency mechanical impact treatment

    Leitner, M., Stoschka, M. & Eichlseder, W., 2014, In: Welding in the world. 58, p. 29-39

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    FKM-konformer Ermüdungsfestigkeitsnachweis bei nichtproportionalen Beanspruchungen

    Leitner, B., Fiedler, M. & Leitner, M., 2014, In: Konstruktion. 09, p. 76-82

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Forschungsgruppe „Betriebsfestigkeit – Technologische Prozesse“

    Leitner, M., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    Integration of Phase-Dependent Work-Hardening into Transient Weld Simulation

    Stoschka, M., Ottersböck, M. & Leitner, M., 2014, Proceedings of the Ninth International Conference on Engineering Computational Technology. p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Local Fatigue Assessment of Welded and High Frequency Mechanical Impact-Treated Joints based on Manufacturing Process Simulation

    Leitner, M., Simunek, D. & Stoschka, M., 2014, Proceedings of the Ninth International Conference on Engineering Computational Technology. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014, Tribologie in Industrie und Forschung: Werkstoffe, Konstruktion und Technologie. p. 3-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014.

    Research output: Contribution to conference › Presentation › Research

  17. 2013
  18. Published

    Assessment of HFMI post-treated joints by the notch stress approach

    Leitner, M., Stoschka, M. & Eichlseder, W., 2013, Proceedings of the 13th International SF2M Spring Meeting. p. 90-102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Comprehensive Investigations of new Filler Materials for Welding of High Strength Steels

    Schnitzer, R., Rauch, R., Ernst, W., Wagner, J., Baumgartner, S., Leitner, M., Stoschka, M., Schlagradl, T., Schneider, R. & Bernhard, C., 2013, Proceedings of the 3rd International Conference. p. 323-332

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Effect of high-strength filler metals on the fatigue behaviour of butt joints

    Stoschka, M., Leitner, M., Posch, G. & Eichlseder, W., 2013, In: Welding in the world. 57, p. 85-96

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Local fatigue assessment of welded and high frequency mechanical impact (HFMI) treated joints by simulation

    Simunek, D., Leitner, M. & Stoschka, M., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  22. Published

    Local fatigue assessment of welded and high frequency mechanical impact treated joints

    Leitner, M., 2013, 127 p.

    Research output: Thesis › Doctoral Thesis

  23. Published

    Numerical simulation loop to investigate the local fatigue behaviour of welded and HFMI-treated joints: XIII-WG2-136-13

    Simunek, D., Leitner, M. & Stoschka, M., 2013

    Research output: Non-textual form › Web publication/site › Research

  24. Published

    Pneumatic Impact Treatment (PIT) – Application and Quality Assurance: XIII-WG2-138-13

    Gerster, P., Schäfers, F. & Leitner, M., 2013

    Research output: Non-textual form › Web publication/site › Research

  25. Published

    Schadensanalyse eines Chippo Klingenhalters

    Mösenbacher, A., Leitner, M. & Godor, I., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Studie des transienten Verfestigungsverhaltens für ein- und mehrlagige Verbindungen

    Stoschka, M., Ottersböck, M. & Leitner, M., 2013, Proceedings of the Simulation Forum FWS 2013. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Study of the local notch stress HFMI master S/N-curve approach on high-strength steel joints

    Stoschka, M., Leitner, M. & Barsoum, Z., 2013, Proceedings of the 2nd Swedish Conference on Design and Fabrication of Welded Structures. p. 76-90

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. 2012
  29. Published

    Contribution to the fatigue enhancement of thin-walled, high-strength steel joints by high frequency mechanical impact treatment: IIW-Document XIII-2416-12

    Leitner, M., Stoschka, M. & Eichlseder, W., 2012

    Research output: Non-textual form › Web publication/site › Research

  30. Published

    EFFECT OF HIGH-STRENGTH FILLER METALS ON FATIGUE

    Stoschka, M., Leitner, M., Fössl, T. & Posch, G., 2012, In: Welding in the world. 56, 3-4, p. 20-29

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Fatigue assessment of welded high-strength steel joints using the local notch stress approach

    Simunek, D., Leitner, M. & Stoschka, M., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Herstellung von Panzerschichten mit Hartstoffpartikeln auf MSG-Basis

    Barwart, S., Leitner, M. & Oberwinkler, C., 2012, In: Tribologie und Schmierungstechnik. p. 19-23

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Influence of hard facing layers on structural fatigue behaviour

    Barwart, S., Leitner, M. & Oberwinkler, C., 2012, Proceedings of the 3rd Fatigue Symposium. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Influence of High Frequency Peening on Fatigue of High-Strength Steels

    Leitner, M., Stoschka, M., Schanner, R. & Eichlseder, W., 2012, In: FME transactions.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Influence of steel grade on the fatigue strength enhancement by high frequency peening technology on longitudinal fillet weld gusset

    Leitner, M. & Stoschka, M., 2012, In: Journal of Engineering and Technology. 1, 3, p. 80-90 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Local fatigue behaviour of welded joints

    Leitner, M., Stoschka, M. & Barwart, S., 2012, Lightweight Design. p. 73-84

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    New developed filler metals for welding of high strength steels

    Schnitzer, R., Leitner, M., Fiedler, M. & Stoschka, M., 2012, Proceedings to the 2nd International Welding and Joining Technologies Congress and 19th Technical Welding Sessions. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Praktische Anwendungen eines höherfrequenten Hämmerverfahrens (PIT) in der Industrie

    Gerster, P., Leitner, M. & Stoschka, M., 2012, Tagungsband. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Quality testing of high-strength filler metals in regard to technical cracking – Part 1: IIW-II-C-438-11

    Stoschka, M., Leitner, M., Schnitzer, R. & Schörghuber, M., 2012

    Research output: Non-textual form › Web publication/site › Research

  40. Published

    Schwingfestigkeit hochfester Stähle an geschweißten Strukturen

    Leitner, M., Stoschka, M., Fössl, T. & Eichlseder, W., 2012, In: Schweiß- & Prüftechnik. p. 12-17

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Topology optimization of a light-weight harvester head focussing on the delimbing knife unit

    Oppliger, F., Leitner, M. & Stoschka, M., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. 2011
  43. Published

    A New Method to Describe Aspects of Welding Parameters on Fatigue Behaviour of High-Strength Steels

    Fössl, T., Leitner, M. & Eichlseder, W., 2011, Processing, Performance and Failure Analysis of Engineering Materials (ICF). p. 105-112

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Contribution to the capability of filler metals to influence fatigue of butt joints: IIW_II-1775-11

    Stoschka, M., Leitner, M., Fössl, T. & Posch, G., 2011

    Research output: Non-textual form › Web publication/site › Transfer

  45. Published

    Evaluation of fillet weld properties and fatigue behaviour in dependence of welding parameters

    Leitner, M., Foessl, T., Stoschka, M. & Eichlseder, W., 2011, In: Archives of civil and mechanical engineering. 11, 3, p. 651-660

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Fatigue Behaviour of High-Strength Steels using an Optimized Welding Process and High Frequency Peening Technology

    Leitner, M., Stoschka, M., Schörghuber, M. & Eichlseder, W., 2011, Global Trends in Joining Cutting and Surfacing Technology. p. 729-736

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Herstellung und Charakterisierung von Verschleißschutzschichten mit Hartstoffpartikeln auf MSG-Basis

    Barwart, S., Leitner, M., Chladil, K. & Oberwinkler, C., 2011, Tagungsband. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Lifetime Enhancement of Welded High-Strength Steel Joints by High Frequency Peening Technology

    Leitner, M., Stoschka, M., Schanner, R. & Eichlseder, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    Lifetime Enhancement of Welded High-Strength Steel Joints by High Frequency Peening Technology

    Leitner, M., Stoschka, M., Schanner, R. & Eichlseder, W., 2011, 28th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 59-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. 2010
  51. Published

    Application of fatigue approaches on fillet welds of high strength steel

    Stoschka, M., Leitner, M., Fössl, T., Leitner, H. & Eichlseder, W., 2010, In: Materialwissenschaft und Werkstofftechnik. 41, p. 961-971

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Contribution to the capability of filler metals to influence pulsating fatique life: II-C-402-10 II-1742

    Stoschka, M., Fössl, T., Leitner, M. & Posch, G., 2010

    Research output: Non-textual form › Web publication/site › Transfer

  53. Published

    Contribution to the Use of Local Fatigue Approaches Focussing on Finishes of Complete Welds

    Stoschka, M., Leitner, M., Fössl, T. & Schanner, R., 2010,

    63rd Annual Assembly & International Conference of the International Institute of Welding

    .     p. 245-252

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Evaluation of fillet weld properties in dependence of weld manufacturing parameters

    Fössl, T., Leitner, M. & Eichlseder, W., 2010, 27th Danubia-Adria Symposium. p. 78-79

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Steigerung der Schwingfestigkeit geschweißter Strukturen durch die Pneumatic Impact Technology (PIT)

    Leitner, M., Fössl, T. & Stoschka, M., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  56. 2009
  57. Published

    Comparison of gear tooth root stresses by analytical, numerical and experimental evaluation

    Leitner, M., Haberer, C. & Eichlseder, W., 2009, 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 269-270

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 Next
View graph of relations

Latest Research Output

View more (204)