Martin Leitner

(Former)

101 - 150 out of 204Page size: 50

Research output

  1. 2017
  2. Published

    Influence of effective stress ratio on the fatigue strength of welded and HFMI-treated high-strength steel joints

    Leitner, M., 1 Sept 2017, In: International Journal of Fatigue. 102.2017, September, p. 158-170 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Crack growth under constant amplitude loading and overload effects in 1:3 scale specimens

    Simunek, D., Leitner, M., Maierhofer, J. & Gänser, H.-P., 17 Aug 2017, In: Procedia structural integrity / ESIS. 2017, 4, p. 27-34 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Fatigue assessment of welded and high frequency mechanical impact (HFMI) treated joints by master notch stress approach

    Leitner, M., Stoschka, M. & Ottersböck, M., 1 Aug 2017, In: International Journal of Fatigue. 101.2017, August, Part 2, p. 232-243 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Stability of high frequency mechanical impact (HFMI) post-treatment induced residual stress states under cyclic loading of welded steel joints

    Leitner, M., Khurshid, M. & Barsoum, Z., 15 Jul 2017, In: Engineering Structures. 143.2017, 15 July, p. 589-602 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Multiaxial fatigue strength assessment of electroslag remelted 50CrMo4 steel crankshafts

    Leitner, M., Tuncali, Z., Steiner, R. & Grün, F., 1 Jul 2017, In: International Journal of Fatigue. 100.2017, July, Part 1, p. 159-175 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Residual stress state induced by high frequency mechanical impact treatment in different steel grades – Numerical and experimental study

    Khurshid, M., Leitner, M., Barsoum, Z. & Schneider, C., 1 Apr 2017, In: International Journal of Mechanical Sciences. 123.2017, April, p. 34-42 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. E-pub ahead of print

    Application of √area-concept to assess fatigue strength of AlSi7Cu0.5Mg casted components

    Garb, C., Leitner, M. & Grün, F., 15 Mar 2017, (E-pub ahead of print) In: Engineering Fracture Mechanics. 185.2017, November, p. 61-71 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    A layer approach to model fatigue strength of surface-hardened components

    Dobberke, D., Wiebesiek, J., Fröschl, J. & Leitner, M., 2017, Proceedings of the Fatigue Design Conference 2017.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Analysis of fatigue notch effect due to axial misalignment for ultra high-strength steel butt joints

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 2017.

    Research output: Contribution to conference › Paper

  11. Published

    APPLICATION OF DIFFERENT SIMULATION APPROACHES TO NUMERICALLY OPTIMIZE HIGH FREQUENCY MECHANICAL IMPACT (HFMI) POST-TREATMENT PROCESS

    Ernould, C., Schubnell, J., Simunek, D., Leitner, M., Maciolek, A., Farajian, M. & Stoschka, M., 2017, COMMISSION XIII FATIGUE OF WELDED COMPONENTS AND STRUCTURES XIII-2684-17.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Damage tolerant fatigue design of seam imperfections in mild steel butt joints by analytical and numerical approaches

    Leitner, M., Remes, H., Murakami, Y. & Stoschka, M., 2017, IIW-Dokument XIII-WG4-158-17.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Effect of microporosity and surface condition on fatigue strength of casted aluminum components

    Leitner, M., Garb, C., Aigner, M. & Stoschka, M., 2017, 17th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Fatigue strength of welded and HFMI-treated steel joints under constant and variable amplitude loading

    Leitner, M., Ottersböck, M., Pußwald, S. & Remes, H., 2017, IIW-Dokument XIII-2691-17.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Fatigue strength of welded ultra high-strength steel joints incorporating low transformation temperature (LTT) filler material and high frequency mechanical impact (HFMI) post-treatment

    Leitner, M., Ottersböck, M., Stoschka, M. & Maurer, W., 2017, Proceedings Euromat 2017.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Local fatigue strength assessment of induction hardened components based on numerical manufacturing process simulation

    Leitner, M., Aigner, R. & Dobberke, D., 2017, Proceedings of the Fatigue Design Conference 2017.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Wear and fatigue resistance of mild steel components reinforced by arc welded hard layers

    Leitner, M., Pichler, P., Steinwender, F. & Guster, C., 2017, In: Surface & coatings technology. 330.2017, 1 December, p. 140-148 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. 2016
  19. Published

    Fatigue Strength Assessment of AlSi7Cu0.5Mg T6W Castings Supported by Computed Tomography Microporosity Analysis

    Garb, C., Leitner, M. & Grün, F., 17 Sept 2016, In: Procedia Engineering. 160.2016, p. 53-60 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Fatigue Strength Assessment of AlSi7Cu0.5Mg T6W Castings Supported by Computed Tomography Microporosity Analysis

    Garb, C., Leitner, M. & Grün, F., 5 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  21. Published

    Quality assurance of HFMI-treatment regarding fatigue strength of fillet welds

    Stoschka, M., Leitner, M. (Co-editor) & Ottersböck, M. (Co-editor), 13 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  22. Published

    Application studies for fatigue strength improvement of welded structures by high-frequency mechanical impact (HFMI) treatment

    Yildirim, H. C., Leitner, M., Marquis, G. B., Stoschka, M. & Barsoum, Z., 2016, In: Engineering Structures. 106, p. 422-435 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Betriebsfestigkeit geschweißter Leichtbaustrukturen

    Leitner, M., 2016.

    Research output: Contribution to conference › Presentation › Research

  24. Published

    Crack propagation analysis and rehabilitation by HFMI of pre-fatigued welded structures

    Leitner, M., Barsoum, Z. & Schäfers, F., 2016, In: Welding in the world.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Effect of weld defects on the fatigue strength of ultra high-strength steels

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 2016, Proceedings of the ICMFM18.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Effect of weld defects on the fatigue strength of ultra high-strength steels

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 2016, In: Procedia Engineering. 160, p. 214-222

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Experimental evaluation of cutting forces for chipping process and developement of wood material model

    Pichler, P., Leitner, M., Grün, F. & Guster, C., 2016, CD-ROM Proceedings of the World Conference on Timber Engineering: WCTE 2016. Eberhardsteiner, J., Winter, W., Fadai, A. & Pöll, M. (eds.). 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Experimental evaluation of cutting forces for chipping process and development of wood material model

    Pichler, P., Leitner, M., Grün, F. & Guster, C., 2016, WCTE 2016 - World Conference on Timber Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Fatigue strength of fillet welded specimens focussing on angular distortion: XIII-2634-16

    Ottersböck, M. (Co-editor), Leitner, M. & Stoschka, M. (Co-editor), 2016.

    Research output: Contribution to conference › Presentation › Research

  30. Published

    Mechanical post-treatment of induction-hardened surface layers to optimize fatigue strength of crankshafts

    Leitner, M., Tuncali, Z., Chen, W. & Grün, F., 2016.

    Research output: Contribution to conference › Presentation › Research

  31. Published

    Multiaxial fatigue assessment of crankshafts by local stress and critical plane approach

    Leitner, M., Grün, F., Tuncali, Z., Steiner, R. & Chen, W., 2016, In: Frattura ed Integrità Strutturale .

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Multiaxial fatigue assessment of crankshafts by local stress approaches

    Leitner, M., Tuncali, Z., Steiner, R., Chen, W. & Grün, F., 2016.

    Research output: Contribution to conference › Presentation › Research

  33. Published

    Multiaxial fatigue assessment of crankshafts by local stress approaches

    Leitner, M., Tuncali, Z., Steiner, R., Chen, W. & Grün, F., 2016, 11th International Conference on Multiaxial Fatigue & Fracture.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Stability of HFMI-treatment induced residual stresses during fatigue

    Leitner, M., Khurshid, M. & Barsoum, Z., 2016.

    Research output: Contribution to conference › Presentation › Research

  35. Published

    Stability of HFMI-treatment induced residual stresses during fatigue

    Leitner, M., Khurshid, M. & Barsoum, Z., 2016.

    Research output: Contribution to conference › Paper

  36. Published

    Validation of Experimental Tests and Simulations of Cutting Forces during Woodworking

    Pichler, P., Leitner, M. & Grün, F., 2016, WCCM XII & APCOM VI. p. 1220 1224 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Validation of Experimental Tests and Simulations of Cutting Forces during Woodworking

    Pichler, P., Leitner, M. & Grün, F., 2016, p. 1220. 1224 p.

    Research output: Contribution to conference › Presentation › Research

  38. 2015
  39. Published

    Fatigue Strength of HFMI-treated and Stress-relief Annealed High-strength Steel Weld Joints: Fatigue Design 2015, International Conference Proceedings, 6th Edition

    Leitner, M., Gerstbrein, S., Ottersböck, M. & Stoschka, M., 31 Dec 2015, In: Procedia Engineering. 133, p. 477-484 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Schwingfestigkeit ultrahochfester Schweißverbindungen

    Ottersböck, M., Leitner, M. & Stoschka, M., 30 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  41. Published

    Fatigue crack growth under constant and variable amplitude loading at semi-elliptical and V-notched steel specimens

    Simunek, D., Leitner, M., Maierhofer, J. & Gänser, H.-P., 18 Nov 2015, p. 348-361.

    Research output: Contribution to conference › Presentation › Research › peer-review

  42. Published

    Effect of post-weld heat treatment on the fatigue strength of HFMI-treated mild steel joints

    Leitner, M., Mössler, W., Putz, A. & Stoschka, M., 1 Nov 2015, In: Welding in the world. 59, 6, p. 861-873 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Accepted/In press

    Effect of local stress state on fatigue strength of welded T-joints

    Ottersböck, M., Leitner, M. & Stoschka, M., 27 Sept 2015, (Accepted/In press) Mathematical Modelling of Weld Phenomena 11. p. 1-19

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Fatigue strength of welded ultra high-strength steel joints

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 3 Jul 2015.

    Research output: Contribution to conference › Paper

  45. Published

    Effect of loading type on welded and HFMI-treated T-joints: XIII-2584-15

    Ottersböck, M., Leitner, M. & Stoschka, M., 29 Jun 2015.

    Research output: Contribution to conference › Paper

  46. Published

    Application of local approaches to assess the fatigue crack: XIII-WG3-36-15

    Stoschka, M., Leitner, M. & Ottersböck, M., 28 Jun 2015. 18 p.

    Research output: Contribution to conference › Presentation › Research

  47. Published

    Study of the support effect of welded high-strength steel joints

    Ottersböck, M., Leitner, M. & Stoschka, M., 5 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  48. Published

    Stützwirkungseffekt bei der Ermüdungsfestigkeit hochfester Stahlschweißverbindungen

    Ottersböck, M., Leitner, M. & Stoschka, M., 12 Feb 2015.

    Research output: Contribution to conference › Presentation › Research

  49. Published

    Application studies for the fatigue strength improvement of welded structures by high-frequency mechanical impact (HFMI) treatment

    Yildirim, H. C., Leitner, M., Marquis, G. B., Stoschka, M. & Barsoum, Z., 2015.

    Research output: Contribution to conference › Presentation › Research

  50. Published

    Beitrag zur Schwingfestigkeit von HFMI-behandelten Proben und Diskussion lokaler Ansätze zur Bauteilauslegung

    Stoschka, M. & Leitner, M., 2015. 19 p.

    Research output: Contribution to conference › Presentation › Research

  51. Published

    Crack propagation analysis and rehabilitation by HFMI of pre-fatigued welded structures

    Leitner, M., Barsoum, Z. & Schäfers, F., 2015.

    Research output: Contribution to conference › Presentation › Research

  52. Published

    Fatigue assessment of universal cardan joint based on laboratory specimen tests

    Palma, P., Leitner, M. & Grün, F., 2015.

    Research output: Contribution to conference › Paper

  53. Published

    Fatigue crack growth under constant and variable amplitude loading at semi-elliptical and V-notched steel specimens

    Simunek, D., Leitner, M., Maierhofer, J. & Gänser, H.-P., 2015, In: Procedia Engineering. p. 348-361

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 Next
View graph of relations

Latest Research Output

View more (204)