Mario Franz Leindl

(Former)

1 - 42 out of 42Page size: 100

Research output

  1. 2012
  2. Published

    A MODERN COURSE IN VIBRATION OF RODS AND BEAMS

    Leindl, M., Oberaigner, E. & Mataln, M., 2012, Proceedings of the International Conference on Engineering Education 2012. p. 101-109

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    A MODERN COURSE IN VIBRATION OF RODS AND BEAMS

    Leindl, M., Oberaigner, E. & Mataln, M., 2012, International Conference on Engineering Education 2012, Abstract Book. p. 38-38

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    ANALYSIS OF ELASTIC WAVE PROPAGATION BY AN IMPROVED FINITE ELEMENT METHOD

    Leindl, M. & Oberaigner, E., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  5. Published

    ANALYSIS OF ELASTIC WAVE PROPAGATION BY AN IMPROVED FINITE ELEMENT METHOD

    Leindl, M. & Oberaigner, E., 2012, Book of abstracts, EUROMECH COLLOQUIUM 540. p. 81-81

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    A statistical physics approach describing martensitic phase transformations

    Oberaigner, E. & Leindl, M., 2012, "A statistical physics approach describing martensitic phase transformations" in Workshop: Mechanics of Materials. p. 931-934

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    A Study of Interface Effects Between Porous and Double Porous Media

    Oberaigner, E., Mataln, M. & Leindl, M., 2012, Bulletin SPG/SSP Vol. 29, 2012. p. 137-137

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Damage of basalt induced by microwave irradiation

    Hartlieb, P., Leindl, M., Kuchar, F., Antretter, T. & Moser, P., 2012, In: Minerals engineering. p. 82-89

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    DYNAMISCHE EFFEKTE AN GRENZFLÄCHEN IN ELASTISCHEN MATERIALIEN UND STRUKTUREN

    Leindl, M. & Oberaigner, E., 2012,

    Programm & Abstracts

    .     p. 13-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    EMPLOYMENT OF OPENFOAM IN TEACHING AND RESEARCH

    Mataln, M., Leindl, M. & Oberaigner, E., 2012, International Conference on Engineering Education 2012, Abstract Book. p. 101-101

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    EMPLOYMENT OF OPENFOAM IN TEACHING AND RESEARCH

    Mataln, M., Leindl, M. & Oberaigner, E., 2012, Proceedings of the International Conference on Engineering Education 2012. p. 541-548

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    FRACTURE MECHANICS ANALYSIS OF A CYLINDRICAL SAMPLE LOADED BY TIME-DEPENDENT HEATING

    Leindl, M. & Oberaigner, E., 2012, 38th SOLID MECHANICS CONFERENCE, Book of Abstracts. p. 58-58

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Interaction of heat checks in aluminum pressure casting dies and their effect on fatigue life

    Raninger, P., Ecker, W., Antretter, T., Leindl, M. & Ebner, R., 2012, Key engineering materials. Vol. 488-489. p. 626-629 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  14. Published

    Mechanical Vibrations of Shape Memory Alloy Wires and Rods: Mathematical and Constitutive Modelling

    Leindl, M. & Oberaigner, E., 2012, ESMC 2012 Book of Abstracts. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    MODELLIERUNGSKONZEPTE ZUR BESCHREIBUNG MARTENSITISCHER PHASENUMWANDLUNGEN IN FORMGEDÄCHTNISLEGIERUNGEN

    Oberaigner, E. & Leindl, M., 2012,

    Programm & Abstracts

    .     p. 12-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Polycrystalline Shape Memory Alloys: Constitutive Modelling by the BSM (Block-Spin-Method)

    Oberaigner, E. & Leindl, M., 2012, Bulletin SPG/SSP Vol. 29, 2012. p. 69-69

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Solution of a time-dependent heat conduction problem by an integral-equation approach

    Leindl, M., Oberaigner, E. & Antretter, T., 2012, In: Computational materials science. p. 178-181

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Statistical physics concepts for the explanation of effects observed in martensitic transformations

    Oberaigner, E. & Leindl, M., 2012, In: Smart materials and structures. 21, p. 094020-094020

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Symbolic Computation in Lagrangian Mechanics

    Leindl, M., Oberaigner, E. & Mataln, M., 2012, Bulletin SPG/SSP Vol. 29, 2012. p. 73-73

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Wave Propagation in Elastic and Thermoelastic Materials

    Leindl, M., Oberaigner, E. & Mataln, M., 2012, Bulletin SPG/SSP Vol. 29, 2012. p. 47-47

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. 2011
  22. Published

    Critical phenomena and relations between thermodynamical response functions of polycrystalline SMAs

    Oberaigner, E., Fischlschweiger, M., Leindl, M., Petersmann, M. & Mataln, M., 2011, 82nd Annual Scientific Conference of the International Association of Applied Mathematics and Mechanics, Book of Abstracts. p. 207-207

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Damping Behaviour of Vibrating Shape Memory Alloy Rods Investigated by a Novel Constitutive Model

    Leindl, M., Oberaigner, E. & Fischlschweiger, M., 2011, 82nd Annual Scientific Conference of the International Association of Applied Mathematics and Mechanics, Book of Abstracts. p. 205-206

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Influence of single crystal size on the phase transformation behavior of a polycrystalline SMA

    Mataln, M., Petersmann, M., Fischlschweiger, M., Leindl, M., Hackl, A. & Oberaigner, E., 2011, Proceedings of the Joint Annual Meeting of the Swiss Physical Society and Austrian Physical Society. p. 58-58

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Influence of single crystal size on the phase transformation behavior of a polycrystalline SMA

    Mataln, M., Petersmann, M., Fischlschweiger, M., Leindl, M., Oberaigner, E. & Hackl, A., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    Modeling stress dependent hysteretic SMA behavior based on a block-spin-approach from statistical mechanics

    Leindl, M., Fischlschweiger, M. & Oberaigner, E., 2011, Advances in heterogeneous material mechanics ICHMM3. p. 564-567

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Sensitivity study of a statistical physics base method describing martensitic phase transformation

    Mataln, M., Fischlschweiger, M., Leindl, M. & Oberaigner, E., 2011, 82nd Annual Scientific Conference of the International Association of Applied Mathematics and Mechanics, Book of Abstracts. p. 206-206

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Solution of a time-dependent heat conduction problem by an integral-equation approach

    Leindl, M., Oberaigner, E. & Antretter, T., 2011, In: Computational materials science. p. 178-181

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Teaching Compressible Fluid Dynamics with the Help of a Computer Algebra System

    Leindl, M., Oberaigner, E., Schreiner, W. & Mataln, M., 2011, Proceedings of the 17th International Conference on Engineering Education. p. 112-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Transient Solute Drag in Migrating Grain Boundaries

    Svoboda, J., Fischer, F. D. & Leindl, M., 2011, In: Acta materialia. 59, p. 6556-6562

    Research output: Contribution to journal › Article › Research › peer-review

  31. 2010
  32. Published

    An Integral-equation Approach to Solve Time-dependent Heat Conduction Problems

    Oberaigner, E., Leindl, M. & Antretter, T., 2010, International Congress of Mathematics, Abstracts, Short Communications, Posters. p. 723-724

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Solution of a time-dependent thermoelastic problem by an integral-equation approach

    Leindl, M., Oberaigner, E. & Antretter, T., 2010, IWCMM20 - International Workshop on Computational Mechanics of Materials, Book of Abstracts. p. 50-50

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Temperature fields in particles and in their environment due to sudden phase transformations

    Fischer, F. D., Leindl, M., Dirschmid, H., Vollath, D. & Clemens, H., 2010, In: Zeitschrift für angewandte Mathematik und Mechanik : ZAMM = Journal of applied mathematics and mechanics. p. 641-650

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Time-Dependent Heat Conduction Problems Solved by an Integral-Equation Approach

    Oberaigner, E., Leindl, M. & Antretter, T., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. Published

    Valuable mathematical tools in engineering education

    Leindl, M. & Oberaigner, E., 2010, ICEE 2010 Proceedings. p. 1161-1168

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. 2009
  38. Published

    Effect of Material Properties on the Thermo-Mechanical Loading and Damage of Pressure Casting Dies – A Numerical Study

    Ecker, W., Leindl, M., Antretter, T., Ebner, R., Siller, I. & Nisslé, S., 2009, Proceedings of the 8th International Tooling Conference. p. 927-939

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. 2008
  40. Published

    Numerical Investigation of Thermal Cracks in Pressure Die Casting Tools

    Leindl, M., Ecker, W., Antretter, T. & Ebner, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    Numerische und experimentelle Untersuchung von Temperaturwechselrissnetzwerken

    Leindl, M., Ecker, W., Ebner, R. & Antretter, T., 2008, Numerische und experimentelle Untersuchung von Temperaturwechselrissnetzwerken. p. 157-174

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Untersuchung des Risswachstums in einem Druckgießwerkzeug mit Hilfe der Finite-Elemente-Methode

    Leindl, M. F., 2008

    Research output: Thesis › Doctoral Thesis

  43. 2007
  44. Published

    Simulation des Wärmeübergangs beim Sprühen im Druckgießprozess

    Hofer, P., Kaschnitz, E., Ecker, W. & Leindl, M., 2007, In: Gießerei-Rundschau. p. 166-168

    Research output: Contribution to journal › Article › Research › peer-review

  45. 2005
  46. Published

    Probleme aus der Variationsrechnung und analytischen Mechanik behandelt mit dem Computeralgebrasystem MAPLE

    Leindl, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. 2004
  48. Published

    Erstellung von MKS-Modellen und Programmierung von Kraftelementen

    Leindl, M., 2004

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. 2002
  50. Published

    Schulungsunterlagen "Numerische Strömungssimulation"

    Leindl, M., Seewald, G. & Grogger, H., 2002

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. 2001
  52. Published

    Konstruktion eines verstellbaren Rungensystems für Rund- und Schnittholztransport

    Leindl, M., 2001

    Research output: Book/Report › Commissioned report › Transfer › peer-review

View graph of relations

Latest Research Output

View more (42)