Jürgen Eckert

201 - 300 out of 452Page size: 100

Research output

  1. 2019
  2. Published

    Evolution of Bimodal Microstructure and High-Temperature Wear Resistance of Al-Cu-Ni Alloys

    Maity, S., Chanda, D. K., Ramasamy, P., Show, B. K., Eckert, J. & Bera, S., 1 Nov 2019, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 51.2020, 1, p. 109-115 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. E-pub ahead of print

    Optimizing the magnetic properties of Fe-based amorphous powder by adjusting atomic structures from vitrification at different temperatures

    Kim, S. Y., Oh, H. R., Kim, H. A., Lee, A. Y., Kim, H. J., Yang, S. S., Kim, Y. J., Choi, H. J., Kim, I. H., Kim, H. G., Eckert, J., Kim, J. R. & Lee, M. H., 25 Oct 2019, (E-pub ahead of print) In: Journal of applied physics. 126.2019, 16, 165109.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Influence of annealing on microstructure and mechanical properties of ultrafine-grained Ti45Nb

    Völker, B., Maier-Kiener, V., Werbach, K., Müller, T., Pilz, S., Calin, M., Eckert, J. & Hohenwarter, A., 5 Oct 2019, In: Materials and Design. 179.2019, 5 October, 11 p., 107864.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    An investigation on diffusivity while achieving a cylindrical aluminide coating on metals using simultaneous spark plasma sintering of powders

    Chawake, N., Ghosh, P., Eckert, J. & Kottada, R. S., 1 Sept 2019, In: Scripta Materialia. 170.2019, September, p. 156-160 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Mechanism of high-pressure torsion-induced shear banding and lamellar thickness saturation in Co-Cr-Fe-Ni-Nb high-entropy composites

    Maity, T., Prashanth, K. G., Janda, A., Kim, J. T., Spieckermann, F. & Eckert, J., 1 Aug 2019, In: Journal of Materials Research. 34.2019, 15, p. 2672-2682 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Tuning the glass forming ability and mechanical properties of Ti-based bulk metallic glasses by Ga additions

    Bera, S., Ramasamy, P., Sopu, D., Sarac, B., Zalesak, J., Gammer, C., Stoica, M., Calin, M. & Eckert, J., 15 Jul 2019, In: Journal of alloys and compounds. 793.2019, 15 July, p. 552-563 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Stability of the B2 CuZr phase in Cu-Zr-Al-Sc bulk metallic glass matrix composites

    Escher, B., Kaban, I., Kühn, U., Eckert, J. & Pauly, S., 25 Jun 2019, In: Journal of alloys and compounds. 790.2019, 25 June, p. 657-665 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Exceptional fracture resistance of ultrathin metallic glass films due to an intrinsic size effect

    Glushko, O., Mühlbacher, M., Gammer, C., Cordill, M. J., Mitterer, C. & Eckert, J., 4 Jun 2019, In: Scientific reports. 9, 1, p. 1-9 9 p., 8281.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Annealing-assisted high-pressure torsion in Zr55Cu30Al10Ni5 metallic glass

    Sarac, B., Spieckermann, F., Rezvan, A., Gammer, C., Krämer, L., Kim, J. T., Keckes, J., Pippan, R. & Eckert, J., 5 May 2019, In: Journal of alloys and compounds. 784.2019, p. 1323-1333 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Mechanochemical Synthesis and Hydrogenation Behavior of (TiFe)100-xNixAlloys

    Zadorozhnyy, V., Berdonosova, E., Gammer, C., Eckert, J., Zadorozhnyy, M., Bazlov, A., Zheleznyi, M., Kaloshkin, S. D. & Klyamkin, S., 2 May 2019, In: Journal of alloys and compounds. 796.2019, 5 August, p. 42 - 46 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Structure Property Relationships in Shape Memory Metallic Glass Composites

    Sopu, D., Yuan, X. D., Moitzi, F., Stoica, M. & Eckert, J., 1 May 2019, In: Materials. 12.2019, 9, 10 p., 1419.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Fast and direct determination of fragility in metallic glasses using chip calorimetry

    Spieckermann, F., Steffny, I., Bian, X., Ketov, S., Stoica, M. & Eckert, J., 13 Mar 2019, In: Heliyon. 5.2019, 3, 13 p., e01334.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    High-resolution transmission electron microscopy investigation of diffusion in metallic glass multilayer films

    Ketov, S. V., Ivanov, Y. P., Sopu, D., Luguine-Luzgin, D. V., Suryanarayana, C., Rodin, A. O., Schöberl, T., Greer, A. L. & Eckert, J., 7 Mar 2019, In: Materials today advances. 2019, 1, 100004.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Controlling the distribution of structural heterogeneities in severely deformed metallic glass

    Bian, X. L., Zhao, D., Kim, J. T., Sopu, D., Wang, G., Pippan, R. & Eckert, J., 2 Mar 2019, In: Materials Science and Engineering A. 752.2019, 3 April, p. 36-42 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Estimation of diffusivity from densification data obtained during spark plasma sintering

    Chawake, N., Ghosh, P., Raman, L., Srivastav, A. K., Paul, T., Harimkar, S. P., Eckert, J. & Kottada, R. S., 1 Mar 2019, In: Scripta Materialia. 161.2019, March, p. 36-39 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Influence of directional microstructure on mechanical properties in Al‐based ultrafine bimodal lamellar structured alloy

    Kim, J. T., Hong, S. H., Eckert, J. & Kim, K. B., 28 Feb 2019, In: Material design & processing communications. 1.2019, 2, 5 p., e52.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Deformation Behavior of Designed Dual-Phase CuZr Metallic Glasses

    Peng, C. X., Sopu, D., Cheng, Y., Song, K. K., Wang, S., Eckert, J. & Wang, L., 16 Feb 2019, In: Materials and Design. 168.2019, 15 April, 107662.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Polymorphic Transformation and Magnetic Properties of Rapidly Solidified Fe26.7Co26.7Ni26.7Si8.9B11 High-Entropy Alloys

    Zhang, Z., Song, K. K., Li, R., Xue, Q. S., Wu, S., Yan, D., Li, X. L., Song, B., Sarac, B., Kim, J. T., Ramasamy, P., Wang, L. & Eckert, J., 15 Feb 2019, In: Materials. 12.2019, 4, 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting

    Salman, O. O., Gammer, C., Eckert, J., Chaubey, A. K. & Scudino, S., 31 Jan 2019, In: Materials science and engineering C (Biomimetic and supramolecular systems). 748.2019, 4 March, p. 205-212 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    A comparative study of glass-forming ability, crystallization kinetics and mechanical properties of Zr55Co25Al20 and Zr52Co25Al23 bulk metallic glasses

    Dong, Q., Pan, Y., Tan, J., Qin, X. M., Li, C. J., Gao, P., Feng, Z. X., Calin, M. & Eckert, J., 17 Jan 2019, In: Journal of alloys and compounds. 785.2019, 15 May, p. 422 - 428 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Nanodiffraction Strain Mapping of Metallic Glasses During In Situ Deformation

    Gammer, C., Pekin, T. C., Ophus, C., Minor, A. M. & Eckert, J., 1 Jan 2019, Structural Integrity. Springer, p. 356-357 2 p. (Structural Integrity; vol. 5).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  23. Published

    Chemnical Bonding Effects on the Brittle-to-Ductile Transition in Metallic Glasses

    Moitzi, F., Sopu, D. (Co-editor) & Eckert, J. (Co-editor), 2019.

    Research output: Contribution to conference › Poster › Research

  24. Published

    Deformation and Crystallization Kinetics of a Softmagnetic Iron Based Bulk Metallic Glass

    Eckert, J., Antoni, M., Chawake, N., Sarac, B., Bachmaier, A., Polak, C., Spieckermann, F., Pippan, R., Zehetbauer, M. J. & Grössinger, R., 2019.

    Research output: Contribution to conference › Poster › Research

  25. Published

    High-Resolution characterization of intermetallic TiAI-Powder for additive Manufacturing

    Wimler, D., Gammer, C., Eckert, J., Mendez Martin, F., Lindemann, J., Clemens, H. & Mayer, S., 2019, Euro PM2019 - Powders for AM - Powder Production. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. 2018
  27. E-pub ahead of print

    Strengthening Effects in Nano-/Ultrafine-Grained Carbon Nanotube Reinforced-Titanium Composites Investigated by Finite Element Modeling

    Li, F., Hao, P., Yi, J., Prashanth, K. G., Maity, T. & Eckert, J., 23 Dec 2018, (E-pub ahead of print) In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 49.2018, 12, p. 6469-6478 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Ductile bulk metallic glass by controlling structural heterogeneities

    Scudino, S., Bian, J. J., Shakur Shahabi, H., Şopu, D., Sort, J., Eckert, J. & Liu, G., 1 Dec 2018, In: Scientific reports. 8.2018, 1, 12 p., 9174.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Origin of large plasticity and multiscale effects in iron-based metallic glasses

    Sarac, B., Ivanov, Y. P., Chuvilin, A., Schöberl, T., Stoica, M., Zhang, Z. & Eckert, J., 1 Dec 2018, In: Nature Communications. 9.2018, 1, 10 p., 1333.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Co-Cr-Mo-C-B metallic glasses with wide supercooled liquid region obtained by systematic adjustment of the metalloid ratio

    Kim, J. T., Hong, S. H., Kim, Y. S., Park, H. J., Maity, T., Chawake, N. M., Prashanth, K. G., Park, J. M., Song, K. K., Wang, W. M., Eckert, J. & Kim, K. B., 24 Nov 2018, In: Journal of non-crystalline solids. 505.2019, 1 February, p. 310-319 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Removing the oxide layer in a nanostructured aluminum alloy by local shear deformation between nanoscale phases

    Wang, Z., Prashanth, K. G., Zhang, W. W., Scudino, S. & Eckert, J., 24 Nov 2018, In: Powder Technology. 343.2019, 1 February, p. 733-737 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Mechanical properties of the magnetocaloric intermetallic LaFe11.2Si1.8 alloy at different length scales

    Glushko, O., Funk, A., Maier-Kiener, V., Kraker, P., Krautz, M., Eckert, J. & Waske, A., 20 Nov 2018, In: Acta materialia. 165.2019, February, p. 40-50 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Synthesis, characterization and thermodynamic stability of nanostructured epsilon-iron carbonitride powder prepared by a solid-state mechanochemical route

    Rounaghi, S. A., Vanpoucke, D. E. P., Esmaeili, E., Scudino, S. & Eckert, J., 3 Nov 2018, In: Journal of alloys and compounds. 778.2019, 25 March, p. 327-336 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Pressure-assisted sintering of Al-Gd-Ni-Co amorphous alloy powders

    Wang, Z., Prashanth, K. G. P., Surreddi, K. B., Suryanarayana, C., Eckert, J. & Scudino, S., 1 Oct 2018, In: Acta materialia. 2.2018, October, p. 157-166 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Author Correction: Origin of large plasticity and multiscale effects in iron-based metallic glasses: Erratum: Origin of large plasticity and multiscale effects in iron-based metallic glasses (Nature Communications, (2018), 9, 1, (1333), 10.1038/s41467-018-03744-5)

    Sarac, B., Ivanov, Y. P., Chuvilin, A., Schöberl, T., Stoica, M., Zhang, Z. & Eckert, J., 11 Sept 2018, In: Nature Communications. 9.2018, 1, 1 p., 3761.

    Research output: Contribution to journal › Comment/debate › peer-review

  36. Published

    Effect of Deformation on a Composite of Cu and the Soft Magnetic Metallic Glass Fe73.9Cu1Nb3Si15.5B6.6

    Antoni, M., Pippan, R., Sarac, B., Ketov, S. V., Bachmaier, A., Polak, C., Spieckermann, F., Grössinger, R. & Eckert, J., Sept 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. E-pub ahead of print

    Structural and mechanical characterization of heterogeneities in a CuZr-based bulk metallic glass processed by high pressure torsion

    Ebner, C., Escher, B., Gammer, C., Eckert, J., Pauly, S. & Rentenberger, C., 30 Aug 2018, (E-pub ahead of print) In: Acta Materialia. 160.2018, November, p. 147-157 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. E-pub ahead of print

    Metallic glass nanolaminates with shape memory alloys

    Şopu, D., Albe, K. & Eckert, J., 22 Aug 2018, (E-pub ahead of print) In: Acta Materialia. 159.2018, 15. October, p. 344-351 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Phase formation, microstructure and deformation behavior of heavily alloyed TiNb- and TiV-based titanium alloys

    Okulov, I. V., Bönisch, M., Okulov, A. V., Volegov, A. S., Attar, H., Ehtemam-Haghighi, S., Calin, M., Wang, Z., Hohenwarter, A., Kaban, I., Prashanth, K. G. & Eckert, J., 22 Aug 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 733.2018, 22 August, p. 80-86 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Cooperative deformation behavior between the shear band and boundary sliding of an Al-based nanostructure-dendrite composite

    Kim, J. T., Hong, S. H., Kim, Y. S., Park, H. J., Maity, T., Chawake, N., Bian, X. L., Sarac, B., Park, J. M., Prashanth, K. G., Park, J. Y., Eckert, J. & Kim, K. B., 11 Aug 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, p. 81-88 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Metal release and cell biological compatibility of beta-type Ti-40Nb containing indium

    Pilz, S., Gebert, A., Voss, A., Oswald, S., Göttlicher, M., Hempel, U., Eckert, J., Rohnke, M., Janek, J. & Calin, M., 1 Jul 2018, In: Journal of Biomedical Materials Research - Part B Applied Biomaterials. 106.2018, 5, p. 1686-1697 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Correlation between the atomic configurations and the amorphous-to-icosahedral phase transition in metallic glasses

    Geng, G., Yan, Z., Hu, Y., Wang, Z., Ketov, S. V. & Eckert, J., 22 Jun 2018, In: Journal of Materials Research. 33.2018, 18, p. 2775-2783 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Enhancing the interface bonding in carbon nanotubes reinforced Al matrix composites by the in situ formation of TiAl3 and TiC

    Liu, X. Q., Li, C. J., Yi, J. H., Prashanth, K. G., Chawake, N., Tao, J. M., You, X., Liu, Y. C. & Eckert, J., 19 Jun 2018, In: Journal of alloys and compounds. 765.2018, 15 October, p. 98-105 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Microstructure and mechanical properties of hierarchical multi-phase composites based on Al-Ni-type intermetallic compounds in the Al-Ni-Cu-Si alloy system

    Kim, J. T., Hong, S. H., Park, J. M., Eckert, J. & Kim, K. B., 15 Jun 2018, In: Journal of alloys and compounds. 749.2018, 15 June, p. 205-210 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Thermal behavior, structural relaxation and magnetic study of a new Hf-microalloyed Co-based glassy alloy with high thermal stability

    Taghvaei, A. H., Shirazifard, N. G., Ramasamy, P., Bednarčik, J. & Eckert, J., 5 Jun 2018, In: Journal of alloys and compounds. 748.2018, June, p. 553-560 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Fast Calorimetry of Mg65-Cu25-Gd10

    Spieckermann, F., Rosenthal, M., Steffny, I., Bian, X. L., Ketov, S. V., Löffler, J. F., Stoica, M. & Eckert, J., Jun 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Universally scaling Hall-Petch-like relationship in metallic glass matrix composites

    Liu, Y. Y., Liu, P. Z., Li, J. J., Liaw, P. K., Spieckermann, F., Kiener, D., Qiao, J. W. & Eckert, J., Jun 2018, In: International journal of plasticity. 105.2018, June, p. 225-238 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. E-pub ahead of print

    Influence of severe straining and strain rate on the evolution of dislocation structures during micro-/nanoindentation in high entropy lamellar eutectics

    Maity, T., Prashanth, K. G., Balci, Ö., Kim, J. T., Schöberl, T., Wang, Z. & Eckert, J., 31 May 2018, (E-pub ahead of print) In: International journal of plasticity. 109.2018, October, p. 121-136 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. E-pub ahead of print

    Plastic deformation mechanisms in severely strained eutectic high entropy composites explained via strain rate sensitivity and activation volume

    Maity, T., Prashanth, K. G., Balçi, Ö., Wang, Z., Jia, Y. D. & Eckert, J., 25 May 2018, (E-pub ahead of print) In: Composites Part B: Engineering. 150.2018, 1 October, p. 7-13 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Effect of boron addition on thermal and mechanical properties of Co-Cr-Mo-C-(B) glass-forming alloys

    Kim, J. T., Hong, S. H., Bian, X., Gokuldoss, P. K., Song, K., Eckert, J., Park, J. M. & Kim, K. B., 17 May 2018, In: Intermetallics. 99.2018, August, p. 1-7 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Electrosorption of Hydrogen in Pd-Based Metallic Glass Nanofilms

    Sarac, B., Karazehir, T., Mühlbacher, M., Kaynak, B., Gammer, C., Schöberl, T., Sarac, A. S. & Eckert, J., 1 May 2018, In: ACS Applied Energy Materials. 1.2018, 6, p. 2630-2646 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Anisotropic elastic properties and phase stability of B2 and B19 CuZr structures under hydrostatic pressure

    Li, F. X., Hao, P. D., Yi, J. H., Şopu, D., Tan, J., Chong, X. Y. & Eckert, J., 30 Apr 2018, In: Intermetallics. 98.2018, July, p. 60-68 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Local nanoscale strain mapping of a metallic glass during in situ testing

    Gammer, C., Ophus, C., Pekin, T. C., Eckert, J. & Minor, A. M., 23 Apr 2018, In: Applied physics letters. 112.2018, 17, 171905.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Microstructure and strength of nano-/ultrafine-grained carbon nanotube-reinforced titanium composites processed by high-pressure torsion

    Li, F. X., Hao, P. D., Yi, J. H., Chen, Z., Prashanth, K. G., Maity, T. & Eckert, J., 11 Apr 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 722.2018, 11 April, p. 122-128 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    A heat treatable TiB2/Al-3.5Cu-1.5Mg-1Si composite fabricated by selective laser melting: Microstructure, heat treatment and mechanical properties

    Wang, P., Gammer, C., Brenne, F., Niendorf, T., Eckert, J. & Scudino, S., 10 Apr 2018, In: Composites Part B: Engineering. 147.2018, 15 August, p. 162-168 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    On cryothermal cycling as a method for inducing structural changes in metallic glasses

    Ketov, S. V., Trifonov, A. S., Ivanov, Y. P., Churyumov, A. Y., Lubenchenko, A. V., Batrakov, A. A., Jiang, J., Louzguine-Luzgin, D. V., Eckert, J., Orava, J. & Greer, A. L., 10 Apr 2018, In: NPG Asia Materials. 10.2018, 4, p. 137-145 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Liquid ejection temperature dependence of structure and glass transition behavior for rapidly solidified Zr-Al-M (M=Ni, Cu or Co) ternary glassy alloys

    Wang, X. H., Inoue, A., Zhao, J. F., Kong, F. L., Zhu, S. L., Kaban, I., Stoica, M., Oswald, S., Fan, C., Shalaan, E., Al-Marzouki, F., Eckert, J., Yin, F. X. & Li, Q., 30 Mar 2018, In: Journal of alloys and compounds. 739.2018, 30 March, p. 1104-1114 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Dual self-organised shear banding behaviours and enhanced ductility in phase separating Zr-based bulk metallic glasses

    Zhang, Z. Q., Song, K. K., Sun, B. A., Wang, L., Cui, W. C., Qin, Y. S., Han, X. L., Xue, Q. S., Peng, C. X., Sarac, B., Spieckermann, F., Kaban, I. & Eckert, J., 29 Mar 2018, In: Philosophical magazine. 98.2018, 19, p. 1744-1764 21 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Martensitic Transformation and Plastic Deformation of TiCuNiZr-Based Bulk Metallic Glass Composites

    Sun, H., Song, K., Han, X., Xing, H., Li, X., Wang, S., Kim, J., Chawake, N., Maity, T., Wang, L. & Eckert, J., 20 Mar 2018, In: Metals : open access journal . 8.2018, 3, p. 196 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Thermomechanical processing of In-containing β-type Ti-Nb alloys

    Pilz, S., Geissler, D., Calin, M., Eckert, J., Zimmermann, M., Freudenberger, J. & Gebert, A., 1 Mar 2018, In: Journal of the Mechanical Behavior of Biomedical Materials. 79.2018, March, p. 283-291 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Effects of new beta-type Ti-40Nb implant materials, brain-derived neurotrophic factor, acetylcholine and nicotine on human mesenchymal stem cells of osteoporotic and non osteoporotic donors

    Kauschke, V., Gebert, A., Calin, M., Eckert, J., Scheich, S., Heiss, C. & Lips, K. S., 28 Feb 2018, In: PLOS ONE. 13.2018, 2, 17 p., e0193468.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Additive Manufacturing of a 316L Steel Matrix Composite Reinforced with CeO2 Particles: Process Optimization by Adjusting the Laser Scanning Speed

    Salman, O., Funk, A., Waske, A., Eckert, J. & Scudino, S., 15 Feb 2018, In: Technologies. 6.2018, 25, 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Anisotropy in local microstructure – Does it affect the tensile properties of the SLM samples?

    Maity, T., Chawake, N., Kim, J. T., Eckert, J. & Prashanth, K. G., 15 Feb 2018, In: Manufacturing Letters. 15.2018 Part A, January, p. 33-37 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Local-structure change rendered by electronic localization-delocalization transition in cerium-based metallic glasses

    Luo, Q., Schwarz, B., Swarbrick, J. C., Bednarčik, J., Zhu, Y., Tang, M., Zheng, L., Li, R., Shen, J. & Eckert, J., 12 Feb 2018, In: Physical Review B. 97.2018, 6, 7 p., 064104.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Amorphous martensite in β-Ti alloys

    Zhang, L., Zhang, H., Ren, X., Eckert, J., Wang, Y., Zhu, Z., Gemming, T. & Pauly, S., 6 Feb 2018, In: Nature Communications. 9.2018, 1, 8 p., 506.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Microstructure and mechanical properties of Al-Cu alloys fabricated by selective laser melting of powder mixtures

    Wang, P., Deng, L., Prashanth, K. G., Pauly, S., Eckert, J. & Scudino, S., 1 Feb 2018, In: Journal of alloys and compounds. 735.2018, February, p. 2263-2266 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Microstructures, Martensitic Transformation, and Mechanical Behavior of Rapidly Solidified Ti-Ni-Hf and Ti-Ni-Si Shape Memory Alloys

    Han, X. L., Song, K. K., Zhang, L. M., Xing, H., Sarac, B., Spieckermann, F., Maity, T., Muehlbacher, M., Wang, L., Kaban, I. & Eckert, J., 1 Feb 2018, In: Journal of Materials Engineering and Performance. 27.2018, 3, p. 1005-1015 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. E-pub ahead of print

    Thermally-triggered Dual In-situ Self-healing Metallic Materials

    Kim, J. T., Kim, H. J., Hong, S. H., Park, H. J., Kim, Y. S., Hwang, Y. J., Jeong, Y. B., Park, J. Y., Park, J. M., Sarac, B., Wang, W. M., Eckert, J. & Kim, K. B., 1 Feb 2018, (E-pub ahead of print) In: Scientific reports. 8.2018, 1, 10 p., 2120.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Wetting, reactivity, and phase formation at interfaces between Ni–Al melts and TiB2 ultrahigh temperature ceramic

    Xi, L., Kaban, I., Nowak, R., Bruzda, G., Sobczak, N. & Eckert, J., 1 Feb 2018, In: Journal of the American Ceramic Society. 101.2018, 2, p. 911-918 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Optimizing mechanical properties of Fe 26.7 Co 26.7 Ni 26.7 Si 8.9 B 11 high entropy alloy by inducing hypoeutectic to quasi-duplex microstructural transition

    Zhang, Z., Song, K. K., Guo, S., Xue, Q. S., Xing, H., Cao, C. D., Dai, F. P., Völker, B., Hohenwarter, A., Maity, T., Chawake, N., Kim, J. T., Wang, L., Kaban, I. & Eckert, J., 23 Jan 2018, In: Scientific reports. 9.2019, 360, 14 p., 360.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Influence of Nb on the microstructure and fracture toughness of (Zr0.76Fe0.24)100-xNbx nano-eutectic composites

    Maity, T., Dutta, A., Jana, P. P., Prashanth, K. G., Eckert, J. & Das, J., 11 Jan 2018, In: Materials. 11.2018, 1, 9 p., 113.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting

    Wang, P., Gammer, C., Brenne, F., Prashanth, K. G., Mendes, R. G., Rümmeli, M. H., Gemming, T., Eckert, J. & Scudino, S., 10 Jan 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 711.2018, January, p. 562-570 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    MnFePSi-Based Magnetocaloric Packed Bed Regenerators: Structural Details Probed by X-Ray Tomography: Structural details probed by X-ray tomography

    Funk, A., Zeilinger, M., Miehe, A., Sopu, D., Eckert, J., Dötz, F. & Waske, A., 1 Jan 2018, In: Chemical engineering science : Génie chimique. 175.2018, 16 January, p. 84-90 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. E-pub ahead of print

    High strength nanostructured Al-based alloys through optimized processing of rapidly quenched amorphous precursors

    Kim, S. Y., Lee, G. Y., Park, G. H., Kim, H. A., Lee, A. Y., Scudino, S., Prashanth, K. G., Kim, D. H., Eckert, J. & Lee, M. H., Jan 2018, (E-pub ahead of print) In: Scientific reports (London : Nature Publishing Group). 8.2018, 12 p., 1090.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Microstructural Characterization of a Laser Surface Remelted Cu-Based Shape Memory Alloy

    Da Silva, M. R., Gargarella, P., Wolf, W., Gustmann, T., Kiminami, C. S., Pauly, S., Eckert, J. & Bolfarini, C., 2018, In: Materials Research. 21.2018, 3, 10 p., e20171044.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Plasticity Enhancement of Composite and Nanoscaled Metallic Glasses

    Sopu, D., Stoica, M. & Eckert, J., 2018, NIC Symposium 2018. Jülich, Vol. 49. p. 281 - 289 (Publication Series of the John von Neumann Institute for Computing (NIC) NIC Series; vol. 49).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Rapid and partial crystallization to design ductile CuZr-based bulk metallic glass composites

    Song, K. K., Han, X., Pauly, S., Qin, Y. S., Kosiba, K., Peng, C. X., Gong, J. H., Chen, P. X., Wang, L., Sarac, B., Ketov, S., Mühlbacher, M., Spieckermann, F., Kaban, I. & Eckert, J., 2018, In: Materials and Design. 139.2018, 5 February, p. 132-140 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. 2017
  79. E-pub ahead of print

    Corrigendum to “Structural modifications in sub-Tg annealed CuZr-based metallic glass”

    Sarac, B., Bernasconi, A., Wright, J., Stoica, M., Spieckermann, F., Mühlbacher, M., Keckes, J., Bian, X. L., Wang, G. & Eckert, J., 6 Dec 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 712.2018, 17 January, p. 819 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. E-pub ahead of print

    Structural modification through pressurized sub-Tg annealing of metallic glasses

    Foroughi, A., Ashuri, H., Tavakoli, R., Stoica, M., Şopu, D. & Eckert, J., 6 Dec 2017, (E-pub ahead of print) In: Journal of applied physics. 122.2017, 21, 215106.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    A combined experimental and theoretical investigation of the Al-Melamine reactive milling system: A mechanistic study towards AlN-based ceramics

    Rounaghi, S. A., Vanpoucke, D. E. P., Eshghi, H., Scudino, S., Esmaeili, E., Oswald, S. & Eckert, J., Dec 2017, In: Journal of alloys and compounds. 729.2017, 30 December, p. 240-248 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Designing a multifunctional Ti-2Cu-4Ca porous biomaterial with favorable mechanical properties and high bioactivity

    Zhang, L., He, Z. Y., Tan, J., Calin, M., Prashanth, K. G., Sarac, B., Völker, B., Jiang, Y. H., Zhou, R. & Eckert, J., Dec 2017, In: Journal of alloys and compounds. 727.2017, 15 December, p. 338-345 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Interface and stability analysis of Tantalum- and Titanium nitride thin films onto Lithiumniobate

    Vogel, U., Oswald, S. & Eckert, J., Dec 2017, In: Applied surface science. 425.2017, 15 December, p. 254-260 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Powder metallurgical processing of low modulus beta-type Ti-45Nb to bulk and macro-porous compacts

    Schmidt, R., Pilz, S., Lindemann, I., Damm, C., Hufenbach, J., Helth, A., Geissler, D., Henss, A., Rohnke, M., Calin, M., Zimmermann, M., Eckert, J., Lee, M. H. & Gebert, A., Dec 2017, In: Powder technology : an international journal on the science and technology of wet and dry particulate systems. 322.2017, December, p. 393-401 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. E-pub ahead of print

    Powder metallurgy of Al-based composites reinforced with Fe-based glassy particles: Effect of microstructural modification

    Balci, Ö., Prashanth, K. G., Scudino, S., Somer, M. & Eckert, J., Dec 2017, (E-pub ahead of print) In: Particulate science and technology : an international journal. 37.2019, 3, p. 286-291 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Strain dependence of diffusion in Zr-based bulk amorphous alloy

    Lee, A. Y., Song, J.-K., Oh, H.-R., Kim, H.-A., Kim, S.-Y., Kwon, A.-R., Park, E.-S., Lim, C.-H., Eckert, J. & Lee, M.-H., Dec 2017, In: Journal of applied physics. 122.2017, 24, 245105.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Bond length deviation in CuZr metallic glasses

    Peng, C. X., Şopu, D., Song, K. K., Zhang, Z.-T., Wang, L. & Eckert, J., 27 Nov 2017, In: Physical review : B, Condensed matter and materials physics. 96.2017, 17, 8 p., 174112.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Wetting behavior and reactivity between liquid Gd and ZrO2 substrate

    Turalska, P., Homa, M., Bruzda, G., Sobczak, N., Kaban, I., Mattern, N. & Eckert, J., 13 Nov 2017, In: Journal of Mining and Metallurgy, Section B: Metallurgy. 53.2017, 3, p. 285-293 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Giant thermal expansion and alpha-precipitation pathways in Ti-alloys

    Bönisch, M., Panigrahi, A., Stoica, M., Calin, M., Ahrens, E., Zehetbauer, M. J., Skrotzki, W. & Eckert, J., 10 Nov 2017, In: Nature Communications. 8.2017, 9 p., 1429.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Influencing the crystallization of Fe80Nb10B10 metallic glass by ball milling

    Ramasamy, P., Shahid, R. N., Scudino, S., Eckert, J. & Stoica, M., Nov 2017, In: Journal of alloys and compounds. 725.2017, 25 November, p. 227-236 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Microstructure evolution and mechanical properties of carbon nanotubes reinforced Al matrix composites

    Liu, X., Li, C., Eckert, J., Prashanth, K. G., Renk, O., Teng, L., Liu, Y., Bao, R., Tao, J., Shen, T. & Yi, J., Nov 2017, In: Materials characterization. 133.2017, November, p. 122-132 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Optimization of the Hot Forging Processing Parameters for Powder Metallurgy Fe-Cu-C Connecting Rods Based on Finite Element Simulation

    Li, F., Yi, J. & Eckert, J., 12 Oct 2017, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 48.2017, 12, p. 6027-6037 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Atomic origin for rejuvenation of a Zr-based metallic glass at cryogenic temperature

    Bian, X. L., Wang, G., Yi, J., Jia, Y. D., Bednarčík, J., Zhai, Q. J., Kaban, I., Sarac, B., Mühlbacher, M., Spieckermann, F., Keckes, J. & Eckert, J., 25 Sept 2017, In: Journal of alloys and compounds. 718.2017, 25 September, p. 254-259 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. E-pub ahead of print

    Structural modifications in sub-Tg annealed CuZr-based metallic glass

    Sarac, B., Bernasconi, A., Wright, J., Stoica, M., Spieckermann, F., Mühlbacher, M., Keckes, J., Bian, X., Wang, G. & Eckert, J., 14 Sept 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 707.2017, 7 November, p. 245-252 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Processing of Ti-5553 with improved mechanical properties via an in-situ heat treatment combining selective laser melting and substrate plate heating

    Schwab, H., Bönisch, M., Giebeler, L., Gustmann, T., Eckert, J. & Kühn, U., Sept 2017, In: Materials and Design. 130.2017, 15 September, p. 83-89 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Micropatterning kinetics of different glass-forming systems investigated by thermoplastic net-shaping

    Sarac, B., Bera, S., Spieckermann, F., Balakin, S., Stoica, M., Calin, M. & Eckert, J., 31 Aug 2017, In: Scripta materialia. 137.2017, August, p. 127-131 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. E-pub ahead of print

    Friction welding of selective laser melted Ti6Al4V parts

    Prashanth, K. G., Damodaram, R., Maity, T., Wang, P. & Eckert, J., 3 Aug 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 704.2017, September, p. 66-71 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Hardening of shear band in metallic glass

    Wang, J. G., Hu, Y. C., Guan, P. F., Song, K. K., Wang, L., Wang, G., Pan, Y., Sarac, B. & Eckert, J., 1 Aug 2017, In: Scientific reports (London : Nature Publishing Group). 2017, 7, 10 p., 7076.

    Research output: Contribution to journal › Article › Research › peer-review

  99. E-pub ahead of print

    Tailoring the Bain strain of martensitic transformations in Ti-Nb alloys by controlling the Nb content

    Bönisch, M., Waitz, T., Calin, M., Skrotzki, W. & Eckert, J., 16 Jul 2017, (E-pub ahead of print) In: International journal of plasticity. 85.2016, October, p. 190-202 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Phase Identification and Size Evaluation of Mechanically Alloyed Cu-Mg-Ni Powders

    Kursun, C., Gogebakan, M., Khoshkhoo, M. S. & Eckert, J., 12 Jul 2017, Nanostructured Materials - Fabrication to Applications: Intech.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  101. Published

    Effect of Co additions on the phase formation, thermal stability, and mechanical properties of rapidly solidified Ti-Cu-based alloys

    Gargarella, P., Pauly, S., Kiminami, C. S. & Eckert, J., 1 Jul 2017, In: Journal of materials research (JMR). 32.2017, July, p. 2578-2584 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Stability of shear banding process in bulk metallic glasses and composites

    Qin, Y., Han, X., Song, K., Wang, L., Cheng, Y., Zhang, Z., Xue, Q., Sun, N., Wang, J., Sun, B., Sarac, B., Spieckermann, F., Wang, G., Kaban, I. & Eckert, J., 1 Jul 2017, In: Journal of materials research (JMR). 32.2017, July, p. 2560-2569 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Reciprocating sliding wear behavior of high-strength nanocrystalline Al84Ni7Gd6Co3 alloys

    Wang, Z., Georgarakis, K., Zhang, W. W., Prashanth, K. G., Eckert, J. & Scudino, S., Jul 2017, In: Wear. 382, p. 78-84

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 Next
View graph of relations

Latest Research Output

View more (452)