Johannes Wiener

(Former)

1 - 37 out of 37Page size: 100

Research output

  1. 2023
  2. Published

    Determination of creep crack growth kinetics of ABS via the C* approach at different temperatures

    Wainstein, J., Wiener, J., Arbeiter, F. & Frontini, P. M., Dec 2023, In: Results in Engineering. 20.2023, December, 9 p., 101481.

    Research output: Contribution to journal › Article › Research › peer-review

  3. E-pub ahead of print

    Concepts towards bio-inspired multilayered polymer-composites

    Wiener, J., Arbeiter, F. & Pinter, G. G., 21 Jul 2023, (E-pub ahead of print) In: Procedia Structural Integrity. 2023, 47, p. 253-260 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Comparing crack density and dissipated energy as measures for off-axis damage in composite laminates

    Drvoderic, M., Gfrerrer, M., Wiener, J., Pinter, G. G., Pletz, M. & Schuecker, C., Apr 2023, In: International Journal of Fatigue. 169.2023, April, 10 p., 107486.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Biomimetic concepts for the optimization of mechanical properties in layered polymeric materials

    Wiener, J., 2023

    Research output: Thesis › Doctoral Thesis

  6. Published

    Correlating crack density, stiffness degradation and dissipated energy during fatigue loading of ±45° GFRP laminates

    Gfrerrer, M., Wiener, J., Drvoderic, M., Brunner, A. J. & Pinter, G., 2023.

    Research output: Contribution to conference › Paper › peer-review

  7. Published

    Investigation of background noise affecting AE data acquisition during tensile loading of FRPs

    Gfrerrer, M., Wiener, J., Brunner, A. J. & Pinter, G. G., 2023, e-Journal of Nondestructive Testing.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Schallemissionsanalyse während der zyklischen Belastung von kontinuierlich faserverstärkten Kunststoffen

    Gfrerrer, M., Wiener, J., Brunner, A. J. & Pinter, G., 2023, SCHALL 23: Entwicklung und Anwendung der Schallemissionsanalyse und Zustandsüberwachung mit geführten Wellen.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. 2022
  10. Published

    DENSITY BASED CLUSTERING AS A TOOL TO ANALYZE ACOUSTIC EMISSION SIGNALS

    Wiener, J., Gfrerrer, M., Schneider, C. & Pinter, G. G., 28 Dec 2022, Proceedings of the 20th European Conference on Composite Materials: Composites meet sustainability. Vol. 3. p. 883-890 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Influence of layer architecture on fracture toughness and specimen stiffness in polymer multilayer composites

    Wiener, J., Arbeiter, F., Kolednik, O. & Pinter, G., Jul 2022, In: Materials and Design. 219.2022, July, 10 p., 110828.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Mechanical properties of additively manufactured polymeric implant materials in dependence of microstructure, temperature and strain-rate

    Petersmann, S., Spörk, M., Van De Steene, W., Üçal, M., Wiener, J., Pinter, G. G. & Arbeiter, F., 5 Apr 2022, Abstract Book of 18th European Mechanics of Materials Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. E-pub ahead of print

    Characterization methods for strain-induced damage in polypropylene

    Wiener, J., Preissegger, F., Plank, B., Arbeiter, F., Kolednik, O. & Pinter, G., 4 Apr 2022, (E-pub ahead of print) In: Polymer Engineering and Science. 62.2022, 6, p. 1959-1973 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Termination criteria for fatigue tests of continuous fiber reinforced polymers

    Gfrerrer, M., Wiener, J., Schneider, C., Brunner, A. J. & Pinter, G. G., 2022, Proceedings of the 20th European Conference on Composite Materials: Composites meet sustainability. Vol. 3. p. 502 - 508

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. 2021
  16. Published

    A combined experimental and simulation-based approach towards toughness optimized polymeric multi-layer structures

    Arbeiter, F., Wiener, J., Tiwari, A., Pinter, G. G. & Kolednik, O., 28 Sept 2021.

    Research output: Contribution to conference › Poster › Research

  17. Published

    Fracture of layered polymers

    Arbeiter, F., Petersmann, S., Wiener, J. & Spoerk, M., 31 Aug 2021.

    Research output: Contribution to conference › Abstract

  18. Published

    Characterization of crack saturation in glass fiber reinforced epoxy resins through optical methods

    Gfrerrer, M., Schneider, C., Wiener, J., Sperling, C. & Pinter, G. G., 29 Jun 2021.

    Research output: Contribution to conference › Poster › Research

  19. Published

    Optimization of Mechanical Properties and Damage Tolerance in Polymer-Mineral Multilayer Composites

    Wiener, J., Kaineder, H., Kolednik, O. & Arbeiter, F., 4 Feb 2021, In: Materials. 14.2021, 4, p. 1-19 19 p., 725.

    Research output: Contribution to journal › Article › Research › peer-review

  20. 2020
  21. Published

    Using Compliant Interlayers as Crack Arresters in 3-D-Printed Polymeric Structures

    Arbeiter, F., Petersmann, S., Wiener, J., Oesterreicher, F., Spörk, M. & Pinter, G. G., 1 Nov 2020, In: Materials Performance and Characterization. 9, 5, 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Mechanical properties of polymeric implant materials produced by extrusion-based additive manufacturing

    Petersmann, S., Spörk, M., Van De Steene, W., Üçal, M., Wiener, J., Pinter, G. G. & Arbeiter, F., 1 Apr 2020, In: Journal of the Mechanical Behavior of Biomedical Materials. 104.2020, April, 13 p., 103611.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Exploiting the Carbon and Oxa Michael Addition Reaction for the Synthesis of Yne Monomers: Towards the Conversion of Acrylates to Biocompatible Building Blocks

    Hennen, D., Hartmann, D., Rieger, P. H., Oesterreicher, A., Wiener, J., Arbeiter, F., Feuchter, M., Fröhlich, E., Pichelmayer, M., Schlögl, S. & Griesser, T., 20 Mar 2020, In: ChemPhotoChem . 4.2020, 7, p. 476-480 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Accepted/In press

    Structural integrity of shrinkage and warpage optimized polypropylene produced by material extrusion-based additive manufacturing

    Petersmann, S., Spörk, M., Wiener, J., Pinter, G. G. & Arbeiter, F., 2020, (Accepted/In press).

    Research output: Contribution to conference › Abstract › peer-review

  25. Published

    Tailoring composite architecture to improve the toughness of pipe grade materials

    Wiener, J., Arbeiter, F., Frank, A. & Pinter, G., 2020, SPE ANTEC 2020: The Annual Technical Conference for Plastic Professionals. p. 782-786 5 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. 2019
  27. E-pub ahead of print

    Application of the material inhomogeneity effect for the improvement of fracture toughness of a brittle polymer

    Tiwari, A., Wiener, J., Arbeiter, F., Pinter, G. & Kolednik, O., 4 Dec 2019, (E-pub ahead of print) In: Engineering Fracture Mechanics. 224.2020, March, 16 p., 106776.

    Research output: Contribution to journal › Article › Research › peer-review

  28. E-pub ahead of print

    Bioinspired toughness improvement through soft interlayers in mineral reinforced polypropylene

    Wiener, J., Arbeiter, F., Tiwari, A., Kolednik, O. & Pinter, G., 19 Nov 2019, (E-pub ahead of print) In: Mechanics of materials. 140.2020, January, 13 p., 103243.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Using soft interlayers as crack arrester in polymeric 3D-printed structures

    Arbeiter, F., Spörk, M., Wiener, J., Oesterreicher, F. & Pinter, G. G., 17 May 2019, 19th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics. p. 1 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Erhöhung der Bruchzähigkeit durch Multischichtaufbau

    Arbeiter, F., Oesterreicher, F., Wiener, J., Spörk, M. & Pinter, G. G., 26 Apr 2019, 28. Leobener Kunststoff-Kolloquium 2019. 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. 2018
  32. Published

    Material selection, testing and validation of additively manufactured components

    Wiener, J., Arbeiter, F., Spörk, M., Gosch, A. & Pinter, G. G., 9 May 2018.

    Research output: Contribution to conference › Paper › peer-review

  33. Published

    Application of J-integral methods to tough pipe materials

    Gosch, A., Arbeiter, F., Berer, M., Wiener, J., Frank, A. & Pinter, G. G., 7 May 2018.

    Research output: Contribution to conference › Paper › peer-review

  34. Published

    Fracture mechanic principles for multi-layer pipe-wall design

    Arbeiter, F., Gosch, A., Wiener, J., Frank, A. & Pinter, G. G., 7 May 2018, p. 1. 4 p.

    Research output: Contribution to conference › Paper › peer-review

  35. Published

    Strukturbauteile aus dem 3D-Drucker: begleitende Werkstoffprüfung zur Eigenschaftsoptimierung

    Arbeiter, F., Wiener, J., Spörk, M. & Pinter, G. G., 20 Apr 2018, p. 1. 4 p.

    Research output: Contribution to conference › Paper

  36. Published

    Influence of strand orientation on mechanical properties in near homogeneous FFF produced PLA parts

    Wiener, J., Arbeiter, F., Spörk, M., Gosch, A. & Pinter, G. G., 27 Mar 2018.

    Research output: Contribution to conference › Poster › Research

  37. Published

    Toughening of polymeric materials by utilizing spatial material property variations: Towards bio-inspired multi-layered materials

    Arbeiter, F., Wiener, J., Gosch, A., Pinter, G. G. & Kolednik, O., 25 Mar 2018, p. 1. 4 p.

    Research output: Contribution to conference › Paper

  38. Published

    Fracture mechanical characterization and lifetime estimation of near-homogeneous components produced by fused filament fabrication

    Arbeiter, F., Spoerk, M., Wiener, J., Gosch, A. & Pinter, G., 5 Jan 2018, In: Polymer Testing. 66.2018, April, p. 105-113 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Biomimetic Design Concepts for the Pipe Architecture of Tomorrow

    Pinter, G. G., Arbeiter, F., Wiener, J., Frank, A. & Kolednik, O., 2018, Proceedings Plastics Pipes XIX. 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. 2017
  41. Published

    Synthesis and Characterization of Thiol-yne and Thiol-yne-methacrylate Derived Photo-curable Resins

    Wiener, J., 2017

    Research output: Thesis › Master's Thesis

  42. 2016
  43. Published

    Photopolymerisierbare Monomere für den 3D Druck von biokompatiblen Strukturen

    Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Mostegel, F., Edler, M., Pinter, G. & Grießer, T., Apr 2016, Schriftenreihe Kunststofftechnik Leoben: 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt. Vol. 6. p. 127-131

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Tough and degradable photopolymers derived from alkyne monomers for 3D printing of biomedical materials

    Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Gmeiner , R., Edler, M., Pinter, G. & Grießer, T., 2016, In: Polymer Chemistry. 7, p. 5169-5180

    Research output: Contribution to journal › Article › Research › peer-review

  45. 2015
  46. Published

    Promising Biocompatible Monomers for Thiol-yne Based Photopolymers

    Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Mostegel, F., Samusjew, A., Edler, M., Pinter, G. & Grießer, T., 21 Sept 2015, Regional Conference Polymer Processing Society Graz 2015 - Book of Abstracts. p. 295 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

View graph of relations

Latest Research Output

View more (37)