Jiehua LI

1 - 50 out of 161Page size: 50

Research output

  1. 2024
  2. Published

    Effect of local loading on microstructure and enhanced mechanical property of large complex castings prepared by Al–Si–Fe–Mn–Mg–Cu alloy during squeeze casting

    Meng, S., Gao, M., Liu, Y., Yang, L., Ma, H., LI, J., Wang, J. & Guan, R., 20 Nov 2024, In: Journal of Materials Science & Technology. 200.2024, 20 November, p. 215-226 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    High-pressure-torsion-induced segregation, precipitation and grain refinement of Al-(Si, Mg and Cu) binary alloys

    Feng, M., Wu, Q., Xue, J., Luo, Z., Wang, Z., An, X., Liao, X., LI, J., Jin, S. & Sha, G., 10 Nov 2024, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 199.2024, 10 November, p. 102-113 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Achieving Superior Strength-ductility-conductivity Combination in TiB2p 6201 Composites via Particle Rotation and Sub-grain Refinement

    Zhao, K., Li, X., Liu, X., Shi, S., Guo, E., Kang, H., Hao, Z., LI, J., Zhang, Y., Chen, Z. & Wang, T., Jul 2024, In: Advanced engineering materials. 26.2024, 13, 13 p., 2400531.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Semi-analytical and experimental heat input study of additively manufactured Zr-based bulk metallic glass: Insights into nano- and global-scale relaxation and crystallization

    Hadibeik Neishaboori, S., Gingl, E., Schretter, L., Bochtler, B., LI, J., Gammer, C., Hohenwarter, A., Spieckermann, F. & Eckert, J., 5 Jun 2024, In: Additive Manufacturing. 89.2024, 5 June, 15 p., 104295.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Improving the corrosion resistance of 7055 alloy by manipulating passivation film through trace addition of TiB2 nanoparticles

    Li, X., Wang, W., Wu, Y., Kang, H., Guo, E., LI, J., Chen, Z., Xu, Y. & Wang, T., 30 May 2024, In: Applied surface science. 656.2024, 30 May, 159722.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Microstructure Evolution and Mechanical Properties at Ambient and Elevated Temperatures of in-situ TiB2/2219Al Matrix Composites During Cold Rolling

    Li, L., Zhou, D., Wei, C., Han, Z., LI, J., Kang, H., Guo, E., Zhang, Y., Chen, Z. & Wang, T., 7 May 2024, In: Metals and materials international. 30.2024, 10, p. 2791-2807 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Investigation on the Duration of Action of Mg3N2 as a Grain Refiner for AZ80 Alloy

    Hösele, T., Neunteufl, E. & Li, J., 22 Apr 2024, In: Metals. 14.2024, 4, 11 p., 485.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Elucidating effects of Eu and P on solidification and precipitation of Al-7Si-0.3Mg based alloys refined by Ta and TiB2

    Spáčil, I., Gehringer, D., Holec, D., Albu, M. & LI, J., 25 Mar 2024, In: Journal of alloys and compounds. 978.2024, 25 March, 16 p., 173343.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Agglomerating behavior of in-situ TiB2 particles and strength-ductility synergetic improvement of in-situ TiB2p/7075Al composites through ultrasound vibration

    Wu, Y., Li, L., Kang, H., Guo, E., LI, J., Du, G., Chen, Z. & Wang, T., Feb 2024, In: Materials characterization. 208.2024, February, 10 p., 113652.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Cavitation-induced particle engulfment via enhancing particle-interface interaction in solidification

    Zhao, K., Li, X., Liu, X., Guo, E., Kang, H., Hao, Z., LI, J., Zhang, Y., Chen, Z. & Wang, T., Feb 2024, In: Ultrasonics sonochemistry. 103.2024, February, 10 p., 106801.

    Research output: Contribution to journal › Article › Research › peer-review

  12. 2023
  13. Published

    Revealing nucleation kinetics of entrained eutectic Si droplets in high purity melt spun Al-5Si based alloys with additions of Ta, TiB2, Eu and P

    Spáčil, I. & LI, J., 15 Dec 2023, In: Journal of alloys and compounds. 968.2023, 15 December, 14 p., 172032.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Silicon Poisoning and Effects of Tantalum on AlSi Alloys

    Pammer, M., Pölzl, J. & LI, J., 21 Nov 2023, In: Metals. 13.2023, 12, 11 p., 1917.

    Research output: Contribution to journal › Article › Research › peer-review

  15. E-pub ahead of print

    Elucidating the evolution of long-period stacking ordered phase and its effect on deformation behavior in as-cast Mg-6Gd-1Zn-0.6Zr alloy

    Lee, S., Park, Y., Go, J., Kim, Y. M., Sohn, S. S., LI, J. & Choi, P.-P., 9 Sept 2023, (E-pub ahead of print) In: Journal of magnesium and alloys. 11.2023, 8, p. 2801-2810 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Improving the stress corrosion resistance of 7075 matrix composites through combination of nanoparticle incorporation and retrogression re-aging treatment

    Li, S., Wu, Y., Wang, W., Wang, X., Kang, H., Guo, E., LI, J., Xu, Y., Chen, Z. & Wang, T., Aug 2023, In: Materials Today Communications. 36.2023, August, 10 p., 106639.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Revealing effects of solute Ta on solidification and precipitation of Al-7Si-0.3Mg based alloys

    Spacil, I., Holec, D., Albu, M. & LI, J., Aug 2023, In: Materialia. 30.2023, August, 17 p., 101846.

    Research output: Contribution to journal › Article › Research › peer-review

  18. E-pub ahead of print

    Decoupling electroplasticity by temporal coordination design of pulse current loading and straining

    Li, H., Jin, F., Zhang, M., Ding, J., Bian, T., LI, J., Ma, J., Zhang, L. & Wang, Y., 10 Jul 2023, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 881.2023, 10 August, 17 p., 145435.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Effect of Ca and P on the Size and Morphology of Eutectic Mg2Si in High-Purity Al-Mg-Si Alloys

    Zarif, M. Z., Spacil, I., Pabel, T., Schumacher, P. & LI, J., 17 Apr 2023, In: Metals : open access journal . 13.2023, 4, 16 p., 784.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Two-Phase Flow Coordination Characteristics of H62 Brass Alloy Prepared by Up-Drawing Continuous Casting

    Li, B., Fu, Q., Yu, R., Lin, Z., Wang, J., Wang, X., Guan, R. & LI, J., 15 Mar 2023, In: Metals : open access journal . 13.2023, 3, 12 p., 599.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Multiscale microstructures, mechanical properties and electrical conductivity of in-situ dual-size TiB2 particles reinforced 6201 aluminum matrix composites

    Zhao, K., Liu, X., Fang, Y., Guo, E., Kang, H., Hao, Z., LI, J., Du, G., Liu, L., Chen, Z. & Wang, T., 7 Mar 2023, In: Journal of Materials Research and Technology. 23.2023, March-April, p. 5459-5473 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    A Comparison of Microstructure and Casting Defects of Rheocasting and Thixocasting Al-Si-Mg Alloy

    Li, J., Spacil, I., Winklhofer, J., Hofstätter, F. & Griesebner, S., 2023, Solid State Phenomena. Trans Tech Publications, p. 61-66 6 p. (Solid State Phenomena; vol. 347).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  23. Published

    A comparison of microstructure and casting defects of rheocasting and thixocasting Al-Si-Mg alloys

    LI, J., Spáčil, I., Winklhofer, J., Hofstätter, F. & Griesebner, S., 2023, Solid State Phenomena. Vol. 347. p. 61-66 (Solid State Phenomena).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  24. Published

    Effect of Eu and P additions with Ta grain refiner on the solidification microstructure of Al-7Si-0.3Mg alloys

    Spacil, I., Schumacher, P. & LI, J., 2023, In: IOP Conference Series: Materials Science and Engineering. 2023, 1274, 6 p., 012006.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Effect of Mn addition on microstructure, mechanical properties and die soldering of rheocasting Al-7Si-0.3Mg alloys

    LI, J., Spáčil, I., Winklhofer, J., Hofstätter, F. & Griesebner, S., 2023, Solid State Phenomena. Vol. 347. p. 67-73 7 p. (Solid State Phenomena).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  26. Published

    Precipitation processes of Al-1.7at%Cu and the influence of Au micro-alloying studied by dilatometry

    Brumbauer, F., Brossmann, U., Enzinger, R., LI, J., Sprengel, W. & Würschum, R., 2023, In: Journal of alloys and compounds. 960.2023, 15 October, 8 p., 170699.

    Research output: Contribution to journal › Article › Research › peer-review

  27. 2022
  28. Published

    Elucidation of formation and transformation mechanisms of Ca-rich Laves phase in Mg-Al-Ca-Mn alloys

    LI, J., Zhou, X., Breen, A., Peng, Z., Su, J., Kürnsteiner, P., Correa, M. J. D., Chwałek, M. L., Wang, H., Holec, D., Mayer, J. & Dehm, G., 20 Dec 2022, In: Journal of alloys and compounds. 928.2022, 20 December, p. 1-12 12 p., 167177.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Ultrasound-Assisted Solidification of a Cu–Cr Alloy

    Zhang, S., Kang, H., Cheng, M., Chen, Z., Wang, Z., Guo, E., LI, J. & Wang, T., Dec 2022, In: Acta metallurgica Sinica (English letters). 35.2022, 12, p. 2082-2088 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Formation mechanism of TiB2 nanoparticles and development of TiB2p/6201 nanocomposites as a neoteric conducting material

    Zhao, K., Liu, M., Kang, H., Guo, E., Li, J., Liu, L., Chen, Z. & Wang, T., 25 Sept 2022, In: Journal of alloys and compounds. 916.2022, 25 September, 9 p., 165461.

    Research output: Contribution to journal › Article › Research › peer-review

  31. E-pub ahead of print

    Elucidating dynamic precipitation and yield strength of rolled Mg-Al-Ca-Mn alloy

    LI, J., Zhou, X., Su, J., Breitbach, B., Chwałek, M. L., Wang, H. & Dehm, G., 14 Sept 2022, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 856.2022, 20 October, 17 p., 143898.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Elucidating thermal conductivity mechanism of Al-9Si based alloys with trace transition elements (Mn, Cr, V)

    Zhou, Y., Zhang, X., Zhong, G., Zhang, J., Yang, Y., Kang, D., Li, H., Jie, W., Schumacher, P. & LI, J., 25 Jun 2022, In: Journal of alloys and compounds. 907.2022, 25 June, 13 p., 164446.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Influence of Zn and/or Ag additions on microstructure and properties of Al-Mg based alloys

    Guo, C., Zhang, H. & LI, J., 25 May 2022, In: Journal of alloys and compounds. 904.2022, 25 May, 12 p., 163998.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Ultrasound-assisted dispersion of TiB2 nanoparticles in 7075 matrix hybrid composites

    Wu, Y., Liu, B., Kang, H., Guo, E., LI, J., Du, G. & Wang, T., 18 Apr 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 840.2022, 18 April, 9 p., 142958.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Effects of Si and Sr elements on solidification microstructure and thermal conductivity of Al–Si-based alloys

    Zhang, X., Zhou, Y., Zhong, G., Zhang, J., Chen, Y., Jie, W., Schumacher, P. & LI, J., 8 Mar 2022, In: Journal of materials science. 57.2022, March, p. 6428-6444 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Effect of a Solute Ta on Grain Refinement of Al-7Si-0.3Mg Based Alloys

    Spacil, I., Holec, D., Schumacher, P. & LI, J., 10 Jan 2022, Solid State Phenomena. Vol. 327.2022. p. 54-64 (Solid State Phenomena).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  37. Published

    Effect of the Mg3N2 Sub-Micron Particle on the Grain Refinement of AZ80 Alloy

    LI, J., Pammer, M., Neunteufl, E. & Schumacher, P., 10 Jan 2022, Solid State Phenomena. Vol. 327.2022. p. 45-53 (Solid State Phenomena).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  38. Published

    Using Recycled Materials for Semi-Solid Processing of Al-Si-Mg Based Alloys

    LI, J., Zhang, X., Winklhofer, J., Griesebner, S., Oberdorfer, B., Jie, W. & Schumacher, P., 10 Jan 2022, Solid State Phenomena. January ed. Trans Tech Publications, Vol. 327.2022. p. 207-222 16 p. (Solid State Phenomena).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  39. Published

    Effect of Solute Ta on Grain Refinement of Al-7Si-0.3Mg Based Alloys

    Spacil, I., Holec, D., Schumacher, P. & Li, J., 2022, Semi-Solid of Alloys and Composites XVI - Selected peer-reviewed full text papers from the 16th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2021. Li, J. & Rassili, A. (eds.). Trans Tech Publications, p. 54-64 11 p. (Solid State Phenomena; vol. 327 SSP).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. 2021
  41. Published

    Sand Casting of Metallic Parts and Structures

    LI, J., 1 Sept 2021, Encyclopedia of Materials: Metals and Alloys. Elsevier, p. 37-53 17 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  42. E-pub ahead of print

    Unusual relationship between impact toughness and grain size in a high-manganese steel

    Xie, P., Shen, S., Wu, C., LI, J. & Chen, J., 13 Apr 2021, (E-pub ahead of print) In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 89.2021, 30 October, p. 122-132 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Composition-dependent dynamic precipitation and grain refinement in Al-Si system under high-pressure torsion

    Jin, S., Luo, Z., An, X., Liao, X., LI, J. & Sha, G., 30 Mar 2021, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 68, p. 199-208 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    The nucleation sequence of α-Al on TiB2 particles in Al-Cu alloys

    LI, J., Hage, F. S., Ramasse, Q. M. & Schumacher, P., 15 Jan 2021, In: Acta materialia. 206.2021, March, 9 p., 116652.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Einfluss von Tantal auf die Kornfeinung einer Al10SiMg Legierung

    Pammer, M., LI, J. & Schumacher, P., 2021, In: Gießerei-Rundschau. 68.2021, 2, p. 15-20 6 p.

    Research output: Contribution to journal › Article › Research

  46. 2020
  47. Published

    Microstructure evolution and fracture behavior of Mg-9.5Gd-0.9Zn-0.5Zr alloy subjected to different heat treatments

    Xiao, L., Yang, G., Ma, J., Qin, H., LI, J. & Jie, W., Oct 2020, In: Materials characterization. 168, 110516.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Corrosion behavior of as-cast Mg-5Sn based alloys with In additions in 3.5 wt% NaCl solution.

    Wang, X. J., Chen, Z. N., Ren, J., Kang, H. J., Guo, E. Y., LI, J. & Wang, T. M., Mar 2020, In: Corrosion science. 164.2020, March, p. 108318 11 p., 108318.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Microstructures, mechanical properties and deformation of near-rapidly solidified low-density Fe-20Mn-9Al-1.2C-xCr steels

    Zhang, J., Hu, C., Zhang, Y., LI, J., Song, C. & Zhai, Q., 15 Jan 2020, In: Materials and Design. 186.2020, 15 January, 13 p., 108307.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Microstructure and mechanical properties of Al-Mg-Si alloy fabricated by a short process based on sub-rapid solidification

    Liu, Z.-T., Wang, B.-Y., Wang, C., Zha, M., Liu, G.-J., Yang, Z.-Z., Wang, J.-G., LI, J. & Wang, H.-Y., 2020, In: Journal of Materials Science and Technology. 41.2020, 15 March, p. 178-186 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. 2019
  52. E-pub ahead of print

    Effect of Heterophase Interfaces on Microstructure and Crystallographic Texture Evolution during Rolling of Directionally Solidified Ag-Cu Eutectic Alloy

    LI, J., Li, J., Renk, O., Pippan, R. & Ghosh, P., 31 Oct 2019, (E-pub ahead of print) In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 51.2020, 1, p. 368-379 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Precipitation microstructure in Al-Si-Mg-Mn alloy with Zr additions

    Vončina, M., Medved, J., Kores, S., Xie, P., Schumacher, P. & LI, J., Sept 2019, In: Materials characterization. 155.2019, September, 8 p., 109820.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Understanding formation of Mg-depletion zones in Al-Mg alloys under high pressure torsion

    Xue, J., Jin, S., An, X., Liao, X., Li, J. & Sha, G., 1 May 2019, In: Journal of Materials Science and Technology. 35.2019, 5, p. 858-864 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Grain Refinement of Al4CuTi Based Alloy with Zr, Sc, Er, and TiB2

    LI, J., Ahmad, S. & Schumacher, P., 19 Feb 2019, Light Metals 2019. Springer International Publishing, p. 1423-1429 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Microstructure and magnetic property of LaFe11.6Si1.4 magnetocaloric alloys by a novel short time heat treatment

    Yang, L., Zhou, Z., Feng, S., Li, J., Liu, J., Li, J., Hu, Q. & Li, J., 1 Feb 2019, In: Intermetallics. 105.2019, February, p. 1-5 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 Next
View graph of relations

Contact

Phone: 3304

Latest Research Output

View more (161)